Expand Primary Site - Fail on Getting Started

Hello All,
I am trying to my client's Stand-alone Primary into a newly created CAS.  When I attempt to run the standard steps (Following best practices from Microsoft) from either the .iso direct from the VL site - or expanded onto the disk (Tried several downloads
- all with the same results) - I get no further than The Getting Started screen of the setup Wizard
Literally, the only options available are to Recover a site and/or Uninstall
I'm open for ideas?
Cheers! -Bryan Bryan D. Barboza | Solutions Architect M: 858-429-3000 | D: 858-429-3078 |C: 714-396-4417

To explain further..
I have two Stand-Alone Primary sites.  The Manager wants to retain the site structure - but enable standards at a global level - hence the reason for a CAS (Also - the business is growing very well and may shortly require a CAS).
The third server in question is a CAS with no child primaries attached.  The goal is to expand the existing Stand-Alone Primary servers into the third server - CAS.
When running Install from the .iso or an expanded iso (Contents expanded from .iso into a local folder), I start the expansion process.  I get one or two screens into the wizard when the only options available are to either Recover a Site or Uninstall
SCCM altogether.  All other options are Greyed out.
I have Local Admin (For Application) and Sysadmin (For SQL Server) privileges.
Cheers! -Bryan Bryan D. Barboza | Solutions Architect M: 858-429-3000 | D: 858-429-3078 |C: 714-396-4417

Similar Messages

  • Creation of a simple web site --- how to get started?

    First, I have recently purchased CS5, which is a very nice bundle of fantastic software. However, the thought of mastering all of these packages is mind-boggling. I started by jumping around between different packages, looking at tutorial material, examples, etc. which was quite helpful for getting an overview of how some of them worked and how I might use them. Presently, I have two main objectives --- 1) use Photoshop for doing some painting of images, and 2) use Dreamweaver to build a web site for a friend who offers a place of refuge for homeless cats. I initially thought it might be good to start with the painting project, however, I have changed my plan, and would like to pursue the design of a web page that can be used to help people to find a cat that they can adopt. Note, this is a non-profit application, but one that I believe to be quite important. Here are some of my initial thoughts on this site:
    Site purpose:
    To provide a web site for anyone to look at information on cats at this home, and how they
    can adopt one of them.
    Some features of the site:
    1. A cat database that I as the designer would create. This database would contain
        an entry for each cat available for adoption. It would include such things as
        the name, sex, age, paths to image(s) and/or video(s) of the cat, health status, etc.
        Anyone accessing this site should be able to easily navigate around it and to examine
        entries in this database. The client (designated person at the home offering cats
        for adoption) would be given privledges to modify the database (add, delete, and modify
        entries). The user interface for the client to update the database should be very easy
        to use.
    2. A simple form that could be used for information on someone that would like to adopt
        one of the cats in the database or to make an appointment to go to the location where
        the cat is being kept (for actual contact with the cat).
    3. Track number of visitors to the site
    Preliminary notes on the database
    Fields:
    - ID code (key) % Default: yymmddhrmnName (year-month-day-hr-min-Name)
    - Name
    - Sex (M / F)
    - Neutered / Not neutered
    - Age (estimated)
    - Type (breed)
    - Tagged (chip or ear marking)/ Not tagged
    - Checked In date (yy/mm/dd)
    - Checked Out date (yy/mm/dd)
    - Status (needs home / has home)
    - Social state (1,2,3,4,5)
    - Health state (1,2,3,4,5)
    - Companion state (1,2,3,4,5)
    - Image (file name) % multiple files allowed
    - Video (file name) % multiple files allowed
    - Medical/vet data (e.g. vaccinations, etc.)
    - General information (text on cat that includes comments, observations, etc.)
    Notes:
      * state = 1, Best
                    5, Worst
      Examples:
              Social state = 5, very unfriendly, afraid, etc.
                                   3, can touch if careful
                                   1, very friendly, unafraid
              Health state = 5, not in good health (e.g. infection)
                                   3, only minor health problems
                                   1, in very good health
       Companion state = 5, must have another cat or cats as company
                                   3, could be with other cat(s) company
                                   1, does not need the company of another cat
    Now, with this initial information (granted this is very rough), my question:
    How, armed with CS5, should I attack the problem of getting this web site up and running?
    Keeping in mind that I really would like to learn how to use CS5, and that this would be my first web site project.
    Any suggestions, study plan, references, etc. would be welcomed.
    Message was edited by: Birdy40 because of some small errors and changes.

    In keeping with bregent's admonition - it will invariably turn out more complicated than you imagined, if only because the more you do with this the more you will think of to do. In addition to the excellent suggestions of David Power's books and w3schools, I would offer one other bit of advice: Simplify. Make  your initial project the simplest possible, and then gradually adding more and more features. That will make it easier for you - and this forum - to help along the way.
    Perhaps as a first step, create a database with a few entries and then write code to retrieve the data.Even there you may find fields will need to be adjusted, added or removed or even redefined. Try all sorts of queries. Eventually you can create pages that will allow the input to be done with a form.
    Good luck with the project./
    Barry

  • Another Person Failing to Get Started Needs Help

    Hi there,
    Here at OHSU we just got the necessary information to start to connect to our iTunes site. I am using the Shell script to which I have appended the .cgi extension so that my web server knows what to do with it (itunesu.cgi). I also compiled the appropriate C programs using gcc (seconds, hmac-sha256, urlencode) which are located in
    /mounts/groups/rooms/usr/local/bin
    I downloaded and compiled curl with the following configure options
    ./configure --prefix=/mounts/groups/rooms/usr/local
    I then edited my itunes.cgi with my SITE_URL, DEBUG_SUFFIX, SHARED SECRET and ADMIN_CREDENTIAL that I copied on activation
    I left the rest of the shell script the same as I downloaded it. I then point my browser at the script on my web browser and get the following out put with the debug
    CLIP*********************************
    The destination string is valid and the corresponding destination item was found.
    The identity string is valid and provides the following information:
    Display Name Jane Doe
    Email Address [email protected]
    Username jdoe
    User Identifier 42
    The credential string is valid and contains the following recognized credential:
    1. Administrator@urn:mace:itunesu.com:sites:ohsu.edu
    The time string is valid and corresponds to 2006-09-01 23:56:06Z.
    The format of the signature string is valid, but its value is not valid for the shared secret of the destination and for the received identity, credentials, and time.
    To verify that your signature generation algorithm is correct, try using it with a shared secret of "SHARED-SECRET-FOR-ACCESS-TESTING" (hexadecimal value 0x5348415245442d5345435245542d464f522d4143434553532d54455354494e47). When you use that test shared secret, this debug page will indicate when you have successfully generated a valid signature for it. If you are seeing this paragraph, you have not yet generated such a signature.
    In my shell script I then tried:
    SHARED_SECRET="SHARED-SECRET-FOR-ACCESS-TESTING"
    But I get the same output from the debug web page. I may have missed something simple, but I may not have compiled my curl appropriately or I may have something else completel wrong.
    Any help would be much appreciated
    David
    Windows XP Pro

    In my shell script I then tried:
    SHARED_SECRET="SHARED-SECRET-FOR-ACCESS-TESTING"
    But I get the same output from the debug web page. I
    may have missed something simple, but I may not have
    compiled my curl appropriately or I may have
    something else completel wrong.
    I think its looking for the hexidecimal version of that string; try putting in "0x5348415245442d5345435245542d464f522d4143434553532d54455354494e47" instead and seeing what happens.
    Ken Newquist
    Lafayette College

  • Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

    Hi All
    I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have  SMSPXE.log since it never gets to that point and the distmgr.log  never reaches
    that point either. I've tried
    uncheck pxe boot option - restart - re-check
    uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
    uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
    the above with installing wds unconfigured
    Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
    WDS PXE Secondary Site Issues but mine is on the Primary Site.
    ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
    DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
    Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

    HI again, sorry for the late reply.
    By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
    I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
    The Account used is a local admin and the distribution point is located on the primary site server.
    EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
    On error (source: MsiInstaller) below:
    Product Application Web Service -- Internal Error 25001. 80070490
    I havent mentioned it earlier, but the Server OS is Server 2012.
    I hope this might help you help me :)
     

  • SCCM 2012 Replication between Central Admin Site and all Primary Sites is failing

    Let me start by saying I have made a mistake and now I am paying for it and attempting to fix it. All of our SCCM servers are virtual and exist on an ESX environment. The mistake I made is I restored our Central Admin Site from a backup without also
    restoring the two Primary Sites at the same time. Now the databases between the sites simply refuse to synchronize. I can run the Replication Link Analyzer until I'm blue in the face and even though the data gets replicated once, the replication immediately
    breaks and fails after that.
    Regrettably I no longer have access to backups that would take me back to a point where the three servers were happy. The problem there is our ESX administrator only keeps a limited number of backups per server (we have in excess of 180 virtual servers in
    our ESX environment) and the backups from a point in time where they worked is no longer available.
    As I have said I have tried running the Replication Link Analyzer many times. I have also tried going into the SQL server console and running the stored procedure spDrsSendReplicationInvalid.
    Can anyone provide me with any assistance on how best to restore replication between the Central Admin server and the two Primary servers?

    http://blogs.msdn.com/b/scstr/archive/2012/05/31/how_2d00_to_2d00_site_2d00_server_2d00_recovery_2d00_central_2d00_or_2d00_primary.aspx
    Just an addition: the option called "Recover central administration site:
    Then specify the FQDN of a
    Reference primary site" is the one to try first.
    Torsten Meringer | http://www.mssccmfaq.de

  • Primary Site Deploy Prerequisite Check Failed

    1. Symptom description: check failed
    SQL instance when you run the Prerequisite Check SCCM 2012 for a new primary site.
    2. Environment: My remote SQL Server 2008 R2 SP1 CU6 and uses
    a named instance called INST01 (SRV302 \ INST01). My server will be the primary site watch requirements (SRV501). I
    have a VM to test that was used to ratify the SCCM 2012 R2 (vSRV210).This
    VM had a primary site that was the basis of data in SRV302 \ INST01, this site has been removed by the Configuration Manager Setup wizard, he correctly remove the database SCCM 2012.
    3. The
    exact error message: When trying to run the installation of SCCM 2012 server SRV501, filling in as the database and SRV302.domain.com INST01 for instance, it shows the Prerequisite Check Failed one item as:
    "Dedicated SQL Server instance: Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server instance That site hosts the Configuration Manager
    database for another site. Select a different SQL Server instance for this new site to use, or
    resolve the conflict by uninstalling The Other excellant site or moving to a different database SQL Server instance. "
    In the file ConfigMgrPrereq.log the message is the same:
    srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host its site database. You selected a SQL Server instance that hosts the site">"<05/03/2012 10:00:21>
    srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server Instance That Hosts the site Configuration
    Manager database for another site. Select a different SQL Server instance for this new site to use, or resolves the conflict by uninstalling The Other database excellant site or moving to a different SQL Server instance. "
    4. Any
    recent relevant configuration change (s): Only completely removed the test site that was with the database in SRV302 \ INST01, rebooted the server and tried to start the installation of the production site using the instance where it was before (no more no
    database SCCM it).
    5. Tech diagnosis history: Have you tried doing a restart of the server and
    the instance of SQL without success. I did a test site to reinstall the test SCCM VM vSRV210, pointing
    to the same instance and it works. But the production server 2012 SCCM has to be SRV501. You
    can not create a new instance of the database only for the production site.
    What can I do to install the SCCM 2012 instance that (SRV302 \ INST01)?
    Is there a procedure for cleanup of an instance of SQL for SCCM 2012?
    Is there any way to bypass this check in the SQL setup SCCM 2012?
    Att. Rodrigo Krug

    Hello,
    Beware of the solution, after removingthe key
    SMS even passed the Prerequisite
    Check, but during the installation,
    it stopped with the following error:
    Can not write CertBootStrap\SMS_SQL_SERVER\ registry
    key on server srv.domain.com.
    The operating system Reported error
    4
    ERROR: Failed to write
    to registry certificate configurationon server
    srv302.domain.com.
    ERROR: Failed to create
    SQL Server [srv302.domain.com]certificate
    remotely.
    I had to recreate the keys from the file. Reg
    so that the installation was successful.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap\SMS_SQL_SERVER]
    No values ​​registered.
    With that I succeeded in installing the
    primary site in that instance
    where we had another base before
    SCCM 2012.
    This was supposed to be your solution?
    Att. Rodrigo Krug

  • Secondary Site Install Failure: ReadCertificateThumprint : Failed to get SSB certificate thumbprint

    I am having some issues installing a secondary site at a remote location and it’s driving me crazy. Here is the setup I have.
    SCCM 2012 Primary Site in datacenter
    SQL Server 2012 hosted on the primary site server
    Firewall ports opened for 80, 135, 443, 445, 1433, 4022, 8530 on cisco and host firewalls
    Attempting to have secondary site at each branch office
    Secondary site server computer account is in local admin group on primary
    Primary site server computer account is in local admin group on secondary
    Secondary site server has full access to system management container in AD
    Secondary site server computer account is in a security group which has sysadmin rights on the primary SQL Server
    Utilizing Secondary Site Server pre-existing SQL 2008 R2 instance
    Confirmed 1433, and 4022 accessibility with telnet from secondary to primary
    I run the secondary site wizard from the console, it passes all prereqs and runs setup for about 5 minutes on the secondary site server and fails here (ConfigMgrSetup.log):
    ***Select dbo.fnConverBinaryToBase64String9thumbprint) FROM master.sys.certificates WHERE name='ConfigMgrEndpointCert"
    CSControlSetup::ReadCertificateThumbprint : Failed to get SSB certificate thumbprint.
    Error: Failed to setup SQL Server certificate for service broker "%NameOfMySecondarySiteServer%"
    Error:Failed to initialize site control data.
    I’ve searched around and the only thing I really saw was a reference to a local LSA password filter, which my secondary site server does not have.
    Any ideas?
    Thanks!

    Update: I opened up all firewall ports between the two and still get the error.

  • Expand a Stand-Alone Primary Site into a Hierarchy with CAS using the same server?

    Currently i have a single server lab deployment of SCCM 2012 R2 which has all the CM roles and SQL server also installed on it.  I want to expand the standalone primary site configuration into central administration site but i'm not sure if i can do
    it on the same site system server or if i must get a second server up to do it?
    I read through http://technet.microsoft.com/en-us/library/jj591551.aspx and all the leading articles but i don't really seem to find this information anywhere.
    thanks.

    CAS and Primary Site cannot be installed on the same server.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • CAS & Primary site repl group "Asset Intelligence Knowledge Base" sync error - Link failed

    My environment: SCCM 2012 SP1, CAS + 1 Primary site works exellent - everything replicated and works fine.
    I install one more primary site KP0. At first sync i have an error at replication group "Asset Intelligence Knowledge Base", and link state become failed. (by the way, i DONT use asset intelligence and have no such role on CAS)
    What i'v done:
    1. Look at "replication link analyzer" - nothing usefull but
    Initialization is failed for replication group Asset Intelligence Knowledge Base. 
    RLA detected no re-initialization for the group Asset Intelligence Knowledge Base in last 24 hours. 
    BCP out failed for Asset Intelligence Knowledge Base for tables Unknown.
    at xml view -
    -<Description><Detail Value="Replication initialization is in progress for replication groups MDM_Site, MDM_SiteSpecial, Hardware_Inventory_1, Hardware_Inventory_2, Hardware_Inventory_3, Hardware_Inventory_4, Hardware_Inventory_5, Hardware_Inventory_6,
    Hardware_Inventory_7, Hardware_Inventory_8, Hardware_Inventory_9, Hardware_Inventory_10, Hardware_Inventory_11, Hardware_Inventory_12, Hardware_Inventory_13, Hardware_Inventory_14, Hardware_Inventory_15, Hardware_Inventory_16, Hardware_Inventory_17, Hardware_Inventory_18,
    Hardware_Inventory_19, Hardware_Inventory_20, Hardware_Inventory_21, Hardware_Inventory_22, Hardware_Inventory_23, Hardware_Inventory_24, Hardware_Inventory_25, Operational_Data, High_Priority_Site, Collection_Membership, Medium_Priority_Site, EndpointProtection_Site,
    General_Site_Data, CI_Compliance_Rule_Details, CI_Compliance_Status_Details_and_History, Software_Inventory_and_Metering, Status_Messages, Hardware_Inventory.
    Found replication groups Asset Intelligence Knowledge Base that needs to be re-initialized. Reason code: ReinitializePackageCreationFailed.
    " Name="result"/></Description></IsSiteActive>-<RuleRemediationSteps>-<RuleRemediationStep Name="CallForInitializationIssues"><Parameter Value="CAS" Index="0"/><Parameter
    Value="KP0" Index="1"/><Parameter Value="MDM_Site, MDM_SiteSpecial, Hardware_Inventory_1, Hardware_Inventory_2, Hardware_Inventory_3, Hardware_Inventory_4, Hardware_Inventory_5, Hardware_Inventory_6, Hardware_Inventory_7, Hardware_Inventory_8,
    Hardware_Inventory_9, Hardware_Inventory_10, Hardware_Inventory_11, Hardware_Inventory_12, Hardware_Inventory_13, Hardware_Inventory_14, Hardware_Inventory_15, Hardware_Inventory_16, Hardware_Inventory_17, Hardware_Inventory_18, Hardware_Inventory_19, Hardware_Inventory_20,
    Hardware_Inventory_21, Hardware_Inventory_22, Hardware_Inventory_23, Hardware_Inventory_24, Hardware_Inventory_25, Operational_Data, High_Priority_Site, Collection_Membership, Medium_Priority_Site, EndpointProtection_Site, General_Site_Data, CI_Compliance_Rule_Details,
    CI_Compliance_Status_Details_and_History, Software_Inventory_and_Metering, Status_Messages, Hardware_Inventory" Index="2"/></RuleRemediationStep>-<RuleRemediationStep Name="ReinitializePackageCreationFailed"><Parameter
    Value="KP0" Index="0"/><Parameter Value="CAS" Index="1"/><Parameter Value="Asset Intelligence Knowledge Base" Index="2"/></RuleRemediationStep>
    2. Look at rcmctrl.log at CAS + KP0 (enable logging level = 2) - just one error
    Processing replication group Asset Intelligence Knowledge Base. 
    Current status is Failed.
    ERROR: Replication group "Asset Intelligence Knowledge Base" has failed to initialize for subscribing site KP0, setting link state to Error. 
    3. Look at sql at KP0-
    select * from RCM_DrsInitializationTracking where ReplicationGroup = 'Asset Intelligence Knowledge Base'
    SiteRequesting SiteFulfilling ReplicationGroup RequestTrackingGUID InitializationStatus IsPartialInit CreatedTime ModifiedTime TryCount InitializationPercent
    KP0 CAS Asset Intelligence Knowledge Base 0FC575F9-5C07-46FD-B384-000B38CEDCD8 7 0 2013-04-03 15:17:03.080 2013-04-08 08:32:03.213 0 0
    KP0 CAS Asset Intelligence Knowledge Base B39F39C2-7FFF-424E-B5DD-52FE82B1E12D 99 0 2013-04-08 08:32:03.217 2013-04-08 08:34:59.650 0 21
    KP0 CAS Asset Intelligence Knowledge Base 9E93E7AE-4823-4B3D-B67F-78CFD53404F1 7 0 2013-04-08 08:09:18.117 2013-04-08 08:32:03.213 0 0
    KP0 CAS Asset Intelligence Knowledge Base 01D49D3C-D2AE-4699-9E5C-8D3DC5C3CEF7 7 0 2013-04-08 07:58:55.523 2013-04-08 08:32:03.213 0 0
    Then try to change 99 error status to 7 -> replication starts and fall to error again
    All this time primary site KP0 is in maintainence mode... any ideas?

    I found the issue with my site was because the site I added into the Hierarchy didn't have the replication link properties  site data for distributed views set.  Enabling these and running the link analyser again.  After a little time everything
    showed up green for me.

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx

    I have a new mac book pro and wan't to install my version of lightroom 5 from my old pc to the new one.
    How can i do that? Can't find it here on the site? Thx
    [email protected]

    Hallo, I installed the program as you said. Everything ok.
    When i have to give my serialnummer, it is not accepted. Code is not valid he said
    1160-4008-7475-7547-5706-0812
    Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    www.adobe.com
    Hit the Download link at the bottom the page.
    Hit Lightroom
    Hit Free Trial
    When you are done downloading, launch, and enter your serial number from your previous installation.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Install "use typical installation options for a stand-alone primary site" All SQL Prerequisites Failed. Checks SQL before SQL is even installed?

    So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server.
    But then during the prerequisite checks it fails every SQL check.
    Is it just me or a giant catch 22? Am I missing something here? How is this over looked if it is what it looks like? Why even have this simple install option if it can't work?

    Take a look at my R2 install guide. This is for a stand alone primary. As Torsten states you pretty much need SQL installed and configured correctly prior to running the ConfigMgr install - along with  a few other pre-reqs.
    https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
    Cheers
    Paul | sccmentor.wordpress.com

  • How to remove "Get started with your site"

    Hello,
    I am in the process of automating the creation of a site collection using PowerShell. Everything works fine but I would like to remove or hide the "Get started with your site" that we see the first time we open a site. Deactivating the Getting
    started feature will not remove it.

    For other readers, here's the full script needed:
    # First, get a reference to the target web app:
    $web = Get-SPWeb "[TargetSiteURL]"
    # Assuming that 1) the web page file that you want to examine is
    # the default landing page and 2) Publishing has been activated
    # for the containing site collection, the following gets you a
    # reference to the web part manager:
    $wpm = $web.GetLimitedWebPartManage("pages/default.aspx", [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
    # Note the "pages" in the path. Next, the following lists out
    # all web parts on this page:
    $web.GetLimitedWebPartManager("pages/default.aspx",[System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
    # Review this list, and then identify the PartOrder of the web
    # part you want to remove. It its, say, its "5", you get a
    # reference to web part like so:
    $wp = $wpm.WebParts[5]
    # Now delete the web part:
    $wp.DeleteWebPart
    # and close the web app reference:
    $web.Close()
    It's easier to remove the web part directly from the page, while it's in edit mode, but then the scripted method also works when automation is needed.

  • Failed to get IP address for Local Host (2) , OPMNCTL: opmn start failed

    HI,
    Hi, I have installed on Oracle 10g on Redhat Enterprise Linux V.2.1 . I was able to start OEM without any issues. Recently I had changed the static IP address and I couldn't able to start OPMNCTL and getting the following error while starting opmnctl start. error message is as follows.
    Failed to get IP address for local host(2).....
    Failed to get IP address for local host(2).....
    Failed to get IP address for local host(2).....
    my current configuration in /etc/hosts file is as follows.
    127.0.0.1 localhost.localdomain servername
    After going through some of threads available in Oracle, I have added the static IP address in the /etc/hosts but still I am getting the same error.
    my new hosts file is as follows.
    127.0.0.1 localhost.localdomain servername
    10.21.253.102 localhost.localdomain servername
    I don't know why this is looking for localhost (2). I did not set up any local host (2) and I could not see anything in my network confiuration also.
    could you please help me in this issue? I appreciate your help in this regard.
    Thanks
    venkat

    Hi, i think that the application server part is looking for a /etc/hosts entry
    in this format:
    127.0.0.1 localhost
    As i noticed, this is used for internal communication.
    Try this entry as is, without a domain...

  • SCCM Primary Site installation fails

    Hello!
    In my organization we have two domain/forests. DomainA.local and DomainB.local
    in one forest (DomainA.local) we have sccm 2012 sp1 CAS site. with dedicated database server on sql 2012 sp1 cu5
    in other forest (DomainB.local) we want to setup primary site on sccm 2012 sp1 with dedicated database server on sql 2012 sp1 cu5
    forests have trust both sided.
    all installation accounts have administrative rights on all SC servers. in both domains.
    when i try to install SCCM 2012 primary site in the hierarchy,
    i receiving the errors:
    INFO: Created SQL Server machine certificate for Server [S-SCDB-02.DomainB.local] successfully.
      ERROR: Failed to open certificate store (HRESULT=0x35)    Configuration Manager Setup    9/3/2013 11:56:19 AM    3268 (0x0CC4)
    ERROR: Failed to write S-SCDB-02.DomainB.local SQL Server certificate to store (TrustedPeople) on site server (S-SCDB-01.DomainA.local).
    ERROR: Failed to write certificate of primary site's SQL Server [S-SCDB-02.DomainB.local] to CAS SQL Server [S-SCDB-01.DomainA.local].
    Install user from domainB.local has administrative rights on S-SCDB-01.DomainA.local and sysadmin rights in sql server.
    Also, it has full administrator role on CAS.Of course, it has administrative rights on primary site server and sql server S-SCDB-02.DomainB.local and sysadmin rights.
    WHY????

    >Taking a step back: why? Are you using a CAS and multiple primary sites at all? Do you have 100,000+ clients to manage?
    we need CAS due to our network infrastructure.
    thank you for you help.
    we solved problem today.
    it was need to open "windows" ports on the firewall between SCCM Primary Site server and CAS SQL server to give SCCM
    primary site installation process the ability to install the primary site's sql-server's self-signed certificate to CAS sql-server trusted people local store.
    i did not remember this point in deploying documentation((((

Maybe you are looking for

  • Opening a video in Windows Media Player

    How do you open a video in Windows Media Player? The video I'm trying to open in Windows Media Player is an avi file. I noticed that in the Authorware 7 book, it says to simply add a wmp after "avi". For ex: myvideo.avi.wmp It then says to place or i

  • External page opened in same window

    Not sure if this is the right place for this but thought I'd try. I have a product page with a link that says options. What I want is that when the "options" link is pressed I want an external page that would be relativly small to open infront of the

  • Viewing on Windows

    I have posted a webpage and tested the link (a movie) on a windows machine. A message came up saying that 'Quicktime is missing software required to perform this operation. Unfortunately, it is not available on the QT server.' Then it looked like it

  • Why isn't the switch tab group shortcut documented

    I had to search the web for quite a while to find the shortcut to switch between tab groups (ctrl+`). I found it on a non-mozilla web page. Why doesn't mozilla doesn't document this properly on this keyboard shortcuts page? http://support.mozilla.com

  • Audio not getting to logic

    OS 10.9.1 - MBPro 13" / Logic 9.  I'm using PreSonus AudioBox 22VSL and system preferences can see audio input.  But I can't get any audio into Logic 9! Help!  driving me nuts!