Expiry Notification for User Guest Access on WLC

Is it possible and where to configure warning notification sent to guest users that their account is about to expire?
Also, is there a function in WLC to specify the start date for a local guest user?
Thanks....

That's not possible.
You may look into the NAC Guest Server for advanced features with guest users. Be aware that it's not tied to NAC necessarily. Not sure why they put "NAC" in the product name :-)

Similar Messages

Authentication for user guest denied

I am connecting to two WL 6.0 sp2 servers. I am logging in both as guest.
When I log into one or the other, everything works fine. However, when I
log into both (and create InitialContext's for both), I get the following
error:
java.lang.SecurityException: Authentication for user guest denied in
realm wl_realm
at
weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOutboundRe
quest.java:90)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNode_WLStu
b.java:121)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(Unknown Source)
I tried synchronizing system passwords, accessing each server in a separate
thread -- but nothing seems to work. Does anybody have any ideas?
Interestingly, it seems to behave OK when one of the servers is WL 6.0 Beta.
However, it breaks with sp1 and sp2.
Thanks in advance,
Jared

Hi Jared,
Are the 2 servers in the same cluster? What is your client? When and where do
you see this SecurityException? Do you mean that when you try to get initial
context you provide a username and password? Are you using any custom realm or
just the default file realm?
Joseph
Jared Tuck wrote:
I am connecting to two WL 6.0 sp2 servers. I am logging in both as guest.
When I log into one or the other, everything works fine. However, when I
log into both (and create InitialContext's for both), I get the following
error:
java.lang.SecurityException: Authentication for user guest denied in
realm wl_realm
at
weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOutboundRe
quest.java:90)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNode_WLStu
b.java:121)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(Unknown Source)
I tried synchronizing system passwords, accessing each server in a separate
thread -- but nothing seems to work. Does anybody have any ideas?
Interestingly, it seems to behave OK when one of the servers is WL 6.0 Beta.
However, it breaks with sp1 and sp2.
Thanks in advance,
Jared--
Joseph Nguyen
Developer Relations Engineer
BEA Systems, Inc.

I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365

On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook,
any other option on exchange admin center for the same,
I want to know how to setup Outlook 2013 and 2010 to receive PASSWORD EXPIRY NOTIFICATION without log in domain,

Hi
As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
I suggest you run Office 365 desktop apps reffering to the steps below: -
Step1: - Login to Office 365 Portals.
Step 2: - In the right pane, click
Downloads under Resources.
Step 3: - Click Set up under
Set up and configure your Office desktop apps.
Moreover, please confirm the password policy by the
PowerShell cmdlet.
Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
Step 2: - Run Connect-Msolservice command.
Step 3: - Get a password policy by the following PowerShell cmdlet:
Get-MsolPasswordPolicy –DomainName yourdomain.com
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Java.lang.SecurityException: Authentication for user guest denied in realm wl_realm

Hi,
I am using WL60SP2 on Windows NT 4.0.
I am trying to call a bean from my startup class. The code is as follows
home = lookupHome();
messageSubscriber = (MessageSubscriber) narrow(home.create(),
MessageSubscriber.class);
Right at this point the Weblogic server is throwing the following error.
java.lang.SecurityException: Authentication for user guest denied in
realm wl_realm
<<no stack trace available>>
I know this has something to do with the security. In WL50 I would have
gone to the weblogic.policy file to fix it. With WL60 I know I have to
change something on the console but am not sure.
Please help.
Thanks
Raj

Go into the console and make sure the GuestDisabled property = false
http://e-docs.bea.com/wls/docs61/////ConsoleHelp/security.html
Joe Jerry
Raj Kathlesar wrote:
Hi,
I am using WL60SP2 on Windows NT 4.0.
I am trying to call a bean from my startup class. The code is as follows
home = lookupHome();
messageSubscriber = (MessageSubscriber) narrow(home.create(),
MessageSubscriber.class);
Right at this point the Weblogic server is throwing the following error.
java.lang.SecurityException: Authentication for user guest denied in
realm wl_realm
<<no stack trace available>>
I know this has something to do with the security. In WL50 I would have
gone to the weblogic.policy file to fix it. With WL60 I know I have to
change something on the console but am not sure.
Please help.
Thanks
Raj

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

Wired guest access on WLC 4400 with SW 7.0.240.0

Hello,
after we upgrade our Wlan-controller 4400 from software 7.0.116.0 to 7.0.240.0
wired guest access don't work anymore.
All other things works fine, incl. WLAN guest access!
When we try wired guest access, we get the web-authentication page and can log in.
On the controller we can see that the Policy Manager State changes from WEBAUTH_REQD
to RUN.
But then there is no access to the internet.
We tried also SW 7.0.250.0, same problem!
Log Analysis on the WCS:
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :The WLAN to which client is connecting does not require 802 1x authentication.
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client does not have an IP address yet.
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L3 authentication is required
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role update request. from Unassociated to Local Peer = 0.0.0.0, Old Anchor = 0.0.0.0, New Anchor = 10.101.200.11
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role changed. State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :DHCP successful.
Time :03/12/2014 14:21:26 MEZ Severity :ERROR Controller IP :10.101.200.11 Message :Client got an IP address successfully and the WLAN requires Web Auth or Web Auth pass through.
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client IP address is assigned.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Webauth user logged in to the network. manni
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :AAA response message sent.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
Trying http://www.google.de .... doesnt work. No Log Entries. Next entries while logging out.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Web auth is being triggered again.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L2 authentication has been completed successfully.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :WebAuth user Logged out from network.
Has someone a idea how to solve this problem?
Regards
Manfred

Hi
Yes got it resolved. It turns out that the connection from the wired guest access port to the WLC must be L2. That is the switch that the wired guest acces sport is connected and WLC are connected to must be L2 only. We were using a single switch to do the testing and it was also doing the routing for the test LAN. Even though there was no L3 VLAN interface configured for the VLAN that the guest access port was on for some reason this breaks it. Absolu Didnt have chance to work out the exact limitations of this as we simply made the switch L2 only and configured an 802.1Q trunk to the Internet router and made subinterfaces on the router for the wired and wireless egress ports and it worked then. No config change was needed on the WLC at all.
The only thing I can think of is that it's something about the way the WLC joins the wired guest access ingress VLAn and egress VLAN. The WLC isn't a reall router it says so in the documentation. I think the packet coming from the wired access port is being bridged to the egress VLAn not routed and this is what screws it up (remeber with a router the source and destination MAC addresses would be changed with a bridge they aren't). Got to be something along those lines. If you have a bigger newtork with a guest anchor WLC handling this function you dont run into this as the traffic is coming over an EOIP tunnle from the remote WLC so the switch with the guest anchor WLC doesnt see the MAC address of the wired guest PC.

ISE with CWA and wired guest access via WLC Anchor

Can an Anchor WLC (WLCa) provide a wired guest LAN service if the wlan guest access is using CWA?
We are deploying a WLAN only ISE solution (it is a full license ISE though) but they just want a few wired guest ports. I was hoping to add L2 switch to the DMZ where the WLCa is and that the L2 switch wouldnt need any other config as the WLCa just bridges the wired to the wlan vlan. This Im sure i have done before.
So now I have set wiredguest the same as i have done before ISE and my wired clients get an IP address, but when they redirect, the URL they get is different, and the redirect just doesnt work.
It comes out as:
https://my_ise_ip:8443/guestportal/Login.action?switch_url=https://my_ise_host/login.html&wlan=my_wired_guest_lan&redirect=www.google.co.uk
So does my simple L2 only switch need an ISE config on it or should the WLCa be handling or the redirection just as it would for a wlan device.

The ISE never receives an auth entry, so i dont believe the redirect is working for the wired client. So even though the clients browser gets a redirect url which fails connection, the client info in the WLCa doesnt have a redirect ACL listed like a wlan client would

Email notification for user created through reconciliation in OIM

Hi..
I have done the following configurations for email notification when user is created through reconciliation in OIM
Configuring IT Resource
Name     Email Server
     Type      Mail Server
     Authentication     FALSE
     Server Name     *.*.*.*
     Username
     Password
Creating email definition with the following values
Name     Create User Email Notification
     Type     Provisioning Related
     Language     en
     Region     US
     Object Name     Xellerate User
     Process name     Xellerate User
     From     User
     User Login     Xelsysadm
     Subject      User Created
Add Email notification in a new process task with name Notify
Process definition     Xellerate User
     Task     Notify
     Disable Manual Insert     Enable
     Required for Completion     Enable
     Allow Cancellation while Pending     Enable
     Handler Name     tcComplete Task
     Assignment Rule     Default
     Target Type     User
     User     Xelsysadm
     Email name     Create User Email Notification
     Send Email     Enable
     Notification Assignee     Enable
     Email      Create User Email Notification
     Status     Completed
Xelsysadm has a valid email id. Now when I am reconciling any user, two mail notifications are being sent. Not able to know from where these two notifications are being triggered.
Am i suppose to make any changes in the configurations?
Edited by: Amruta Agarwal on Sep 28, 2011 4:21 AM

Sorry re-read your issue again. I believe there are two notifications because you have added your notify task in the process definition and OIM OOTB sends a notification when a user is recon'd. Thus remove your task or disable the OOTB notification. The property is Recon.SEND_NOTIFICATION
HTH,
BB
Edited by: bbagaria on Oct 7, 2011 9:13 AM

Backend roles neeed for user to access ESS related services

Dear Experts-
Can any one of you please point me to a document or let me know what exact role need to be assigned for a user on backend for him to access all ESS related services in Standard deployment.

read the note 857431
1129412   ESS: Authorizations and roles for WD services in ERP EHP3
844639    MSS: Authorizations and roles for WD services in ERP 2005
785345    Copying authorization default values for services
612585    New: Authorization default values for ext. services
The following roles were delivered for ESS with ERP 2005:
SAP_ESSUSER_ERP05: Single role, containing all non-country-specific
                    functions.
SAP_EMPLOYEE_ERP05_xx:   Single role with the country-specific
                          functions. Each country version has its own
                          role (with xx = country ID). The corresponding
                          composite role is SAP_EMPLOYEE_ERP05.

Transaction Notification For User Defined Object

Dear Expert,
I want to create a transaction notification for my user defined form. I have a matrix on my form which has a field as 'Code'. I want that this field (On Row Level) should have unique values all the time while adding or updating the form.
Object Type: MaterialMaster
Table Name: MaterialDetails
FieldName: U_Code
Plz help me to get this notification.
Regards

Hi Amit,
Please check below query.
IF @object_type = 'MaterialMaster' AND @transaction_type IN('A','U') and @error = 0
BEGIN
IF ( SELECT COUNT(*)
FROM MaterialDetails A
WHERE A.U_Code IN (SELECT U_Code FROM MaterialDetails WHERE U_Code = @list_of_cols_val_tab_del)
GROUP BY A.U_Code
HAVING COUNT(*) > 1
) >1
BEGIN
set @error = -10
set @error_message = 'You can not Add Dublicate Code'
END
End
Hope this help
Regards::::
Atul Chakraborty

BBSM and ISA for WLAN Guest Access

We are considering the purchase of a BBSM to help provide wlan guest access to the Internet.
I know that Micrsoft's ISA server is one component of the BBSM, but can anyone tell me:
1) what version of ISA is implemented in BBSM?
2) is the ISA compoenent at all customizable? That is, can I add poilicies to BBSM's ISA to restrict the Internet sites users can go to?
Thanks very much.
John

I am not sure what version of ISA it is but from our experience you can not filter what addresses the user can go to. we have customised it some in that we forward all of the web traffic comming in to a web filter box and allow the filter box to block sites.

Email Notifications for Users

Is there a way to allow users of my Iweb site to sign up and receive an email when the site is updated?
I tried to do this with an html snippet on my page, but the service defaults to the url for the widget instead of the url for my page. I think this would be confusing for users.
Any ideas?

Hi,
Whether the user has an email attribute in AD?
And when a user exceed the quota, the owner of the affected folder should be the user. Please check if is the cause.
Meanwhile FSRM should provide an error regarding the issue. If we still cannot find the cause please let us know the exact error.
If you have any feedback on our support, please send to [email protected]

Email Notification for users when unlocking or reseting the pwd using SU01

Dear All,
Is it possible to send email notification to users when unlocking or reseting the password using Su01 in SAP .
I think with workflow it can be achived . I like to know if it can be done with any inbuilt funtionality of SAP.
regards
Tony

This is not a SAP standard funtionality... I presume you'll need to create your own custom code to achive that, talk to your abaper.
Regards
Juan

Problem when WCS creates user guest access on the WLCs

Hello,
In my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.
I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.
I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.
Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC.
The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).
On the second WLC, the same user account remains during all its life time.
In attachment a screen shot of the advanced parameter of the guest user.
You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
Any idea about this issue?
By advance thanks.

Thank you for sharing the info. I am glad that your issue is now fixed
Sent from Cisco Technical Support iPad App

DMZ Anchor WLC setup for Wireless Guest Access

I have the following setup.
A DMZ WLC 4402 connected to firewall DMZ interface in 10.10.73.0/24 network.
An Inside WLC 2106 connected to firewall Inside interface in 10.10.71.0/24 network.
Both WLCs are running the same 4.2.176 code.
DMZ WLC is anchor to itself and Inside WLC select the DMZ WLC as the anchor point.
I have setup EoIP between DMZ and Inside WLCs successfully with both the control and data path both show as UP status. >> "show mobility anchor"
The main issue: Clients cannot obtain IP addresses after connected to Guest SSID.
1. Inside WLC, the guest WLAN ingress is 802.11b/g radio and egress port is set to management interface (EoIP) of type WLAN.
What is the DMZ WLC setting? Is the ingress set to "802.11b/g" which does not make sense because the ingress is EoIP from Inside WLC?
Or I still set as 802.11b/g? Same config as Inside WLC? I read from other threads suggested by Terry that the config must be the same for both WLCs.
In the Inside WLC, I saw alot of pdu encapsulation errors for broadcast packets which is ffff.ffff.ffff xxxx which I think is the DHCP request from the connected Wireless clients not making through the EoIP tunnel. I have set static ip for the Wireless client but the packets cannot route through the EoIP tunnel to the far end.
2. DHCP server is provided by DMZ WLC with the scope 10.10.76.0/24. In the Inside WLC, which DHCP server IP adddress to set to? DMZ WLC mgmt ip address? DMZ WLC, the DHCP server is also set to DMZ WLC mgmt ip?
3. Layer 2 authentication. I read that DMZ WLC is supposed to be the DHCP server, Layer 2 or 3 authentication for Wireless Clients. However, it seems like Inside WLC is required to configure the Layer 2 authentication parameters and the DMZ WLC is set to providing the DHCP service?
4. Lastly, anyone has done DMZ WLC sending the Wireless clients traffic to Bluecoat proxy server before hitting the Internet?
Thanks.

One of the biggest things is to make sure the wlan is configured exactly the same. The DMZ WLC ingress is the management and also is the egress port. You can create a dynamic interface on the DMZ WLC, but this way makes thing easier. The DMZ WLC should provide the dhcp, so the dhcp scope of course will be on the same subnet as the management of the DMZ WLC. The DHCP Server will be the ip address of the management interface of the DMZ WLC. The authentication also has to be configured exactly the same on the inside wlc and the DMZ wlc. Since you are pushing clients through the tunnel to the DMZ WLC, that is where clients will need to get their ip address, since that DMZ WLC has a network interface to the guest network. I haven't had luck when a proxy is involved, but I know there was a post a while ago on how to setup the proxy to allow the wlc to bypass the users initial dns resolution.

Expiry Notification for User Guest Access on WLC

Similar Messages

Maybe you are looking for