Export BPMS process as jpeg/pdf

Hi ,
Am using JDeveloper 11gR1 with BPM plugin for modelling Business process. Is there a way to export the process as pdf/jpeg so that I can share the same with non IT folks ?
Thanks,
Naveen

The only way I know of to get a print out is to publish your workflow to MDS. Then log into your bpm\composer and from there you can print your MDS (workflow). The only down side is that it only prints the canvas and no notes/documentation that might be associated with the workflow.

Similar Messages

  • I cannot export my saved book to pdf or jpeg or blurb

    i cannot export my saved book to pdf or jpeg or blurb. Nothing works. If i start a new book , then it works but i would have to redo the entire layout.
    Anyone have the same problem or/and anyone could help?
    Thank you

    Yes i do use LR4.3 .Idid upgrade to L4 from L3 , only because the book feature,to switch from blurb to PDF. I do use mostly my own images or combination of photo montage, but sometimes color backgrounds or lightroom graphics.
    I just reinstalled all my backgrounds and it seems like to work now.No explaination of what went wron (or what is wrong) as i am used to lightroom .May the fact that i am tweeking the layout (using the print layout) or the padding feature quite a bit but that's what the software is supposed to do.

  • How to export 'CMYK/Overprint Preview' document to jpeg/pdf?

    Hi all,
    Is there any way to export the overprint preview as jpeg/pdf ?
    Thanks.

    Appreciate ur help....
    Actually What I want to do is that there is my original document containing some arts or objects like as follows:
    Currently doc is set to CMYK/Preview. Now I clicked the menu item Window>Separations Preview where i checked the Overprint preview, this will set my document CMYK/Overprint Preview and I unchecked Cyan, Yellow and Black from separation preview dialog which gave me result like this :
    I am trying to export the above overprint preview but every time I got the original one.
    I am using AIRasterize suite to get the current state of the document and export it but didnt find any luck. I am also trying to do it on illustrator but I am not able to do i.
    So I am just curious can it be doable or not?
    Thanks.

  • HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

    Have been using Adobe CreatePDF for many months successfully.
    Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
    It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
    When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
    I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
    Tom.

    I am still experiencing this problem. Customer service from Adobe has been abysmal!
    I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
    They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
    I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
    Note: This problem is happening always now, regardless of time being used.
    Tom

  • Dynamic Filename in BPM process (SOAP with attachm. and PayloadSwapBean)

    Hello together
    I have the following BPM process:
    1. IDoc=>WebServiceRequest
    2. WebServiceResponse (payload) => IDoc
    3. WebServiceResponse (attachment) => File
    XI receivs an IDoc an map it to an WebService. The Webservice is called by XI and we receive the WebServiceResponse including a PDF attachment.
    The challenge is to store the PDF attachment with a dynamic filename from the payload of WebServiceResponse.
    We use the PayloadSwapBean to change the payload to the PDF attachment. But then we are not able to access the required information on the original WebService-XML-Response via variable substitution.
    Is there a solution in the standard or have we to use a custom adapter module?
    Thx
    manuku

    Hi Jayasimha,
    We can do this by "Adapter Specific Message Properties" of ur comunication channels.
    1.If u want to keep the output filename same as input filename, no need to use the UDF. only the 'adapter specific parameters' in both sender n receiver file adapter will do that.
    In case if u want to get the filename inside our mapping we have to create a user defined function
    which will return the filename and map it to one of our XML tags. 2nd point gives solution 4 that:
    2. If u want to generate an output file taking some input from the payload,then u hav to use the UDF.There u hav to populate the name.
    Pretty much.... if you set an attribute from the sender side, for example, you can use a UDF and access the particular attribute sent and use it in the mapping. In another example, where no attributes are sent from the sender, you can still actually set a particular attribute, say a filename derived from the payload, using a UDF, and enable the receiver attribute to use it. That's where the UDFs come in - either to get or set particular adapter specific message attributes.
    This will be a very helpful blog which solves ur query:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Regards,
    Vinod.

  • Print List Processing Report to PDF

    hi all,
    i've read many forums about convert info into PDF. but i'm very new to understand those forums.
    In case I want to print list processing report as PDF (not hard copy thru printer). First, user types the data on the screen then click on 'Execute' button, then the system shows the result on screen. After that user asks system for print the screen on menu bar by List=>Print.
    So please advise me how to get the spool id, then export as pdf. As my opinion, i may use CONVERT_ABAPSPOOLJOB_2_PDF and GUI_DOWNLOAD. But where is the place I should put the methods on?
    Thanks in advance.
    Peerasit

    Hi,
    Go through The simple Anallise this program.
    report zabap_2_pdf.
    *-- Enhancements: only allow to be run with variant.  Then called
    *-- program will be transparent to users
    *-- TABLES
    tables:
      tsp01.
    *-- STRUCTURES
    data:
      mstr_print_parms like pri_params,
      mc_valid(1)      type c,
      mi_bytecount     type i,
      mi_length        type i,
      mi_rqident       like tsp01-rqident.
    *-- INTERNAL TABLES
    data:
      mtab_pdf    like tline occurs 0 with header line,
      mc_filename like rlgrap-filename.
    *-- SELECTION SCREEN
    parameters:
      p_repid like sy-repid, " Report to execute
      p_linsz like sy-linsz default 132, " Line size
      p_paart like sy-paart default 'X_65_132'.  " Paper Format
    start-of-selection.
    concatenate 'c:\'
                p_repid
                '.pdf'
      into mc_filename.
    *-- Setup the Print Parmaters
      call function 'GET_PRINT_PARAMETERS'
       exporting
         authority= space
         copies   = '1'
         cover_page                   = space
         data_set = space
         department                   = space
         destination                  = space
         expiration                   = '1'
         immediately                  = space
         in_archive_parameters        = space
         in_parameters                = space
         layout   = space
         mode     = space
         new_list_id                  = 'X'
         no_dialog= 'X'
         user     = sy-uname
       importing
         out_parameters               = mstr_print_parms
         valid    = mc_valid
       exceptions
         archive_info_not_found       = 1
         invalid_print_params         = 2
         invalid_archive_params       = 3
         others   = 4.
    *-- Make sure that a printer destination has been set up
    *-- If this is not done the PDF function module ABENDS
      if mstr_print_parms-pdest = space.
        mstr_print_parms-pdest = 'LOCL'.
      endif.
    *-- Explicitly set line width, and output format so that
    *-- the PDF conversion comes out OK
      mstr_print_parms-linsz = p_linsz.
      mstr_print_parms-paart = p_paart.
      submit (p_repid) to sap-spool without spool dynpro
                       spool parameters mstr_print_parms
                       via selection-screen
                       and return.
    *-- Find out what the spool number is that was just created
      perform get_spool_number using sy-repid
                 sy-uname
        changing mi_rqident.
    *-- Convert Spool to PDF
      call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
        exporting
          src_spoolid= mi_rqident
          no_dialog  = space
          dst_device = mstr_print_parms-pdest
        importing
          pdf_bytecount                  = mi_bytecount
        tables
          pdf        = mtab_pdf
        exceptions
          err_no_abap_spooljob           = 1
          err_no_spooljob                = 2
          err_no_permission              = 3
          err_conv_not_possible          = 4
          err_bad_destdevice             = 5
          user_cancelled                 = 6
          err_spoolerror                 = 7
          err_temseerror                 = 8
          err_btcjob_open_failed         = 9
          err_btcjob_submit_failed       = 10
          err_btcjob_close_failed        = 11
          others     = 12.
    call function 'DOWNLOAD'
         exporting
              bin_filesize            = mi_bytecount
              filename                = mc_filename
              filetype                = 'BIN'
         importing
              act_filename            = mc_filename
         tables
              data_tab                = mtab_pdf.
          FORM get_spool_number *
          Get the most recent spool created by user/report              *
    -->  F_REPID               *
    -->  F_UNAME               *
    -->  F_RQIDENT             *
    form get_spool_number using f_repid
         f_uname
                    changing f_rqident.
      data:
        lc_rq2name like tsp01-rq2name.
      concatenate f_repid+0(8)
                  f_uname+0(3)
        into lc_rq2name separated by '_'.
      select * from tsp01 where  rq2name = lc_rq2name
      order by rqcretime descending.
        f_rqident = tsp01-rqident.
        exit.
      endselect.
      if sy-subrc ne 0.
        clear f_rqident.
      endif.
    endform." get_spool_number
    Regards
    swamy

  • Is there a way to export individual page items as PDF or EPS?

    I have a long document, all threaded, with a bunch of inline graphics. Many of the inline graphics have callouts and pointer lines. I take the graphics, callouts, and pointers, group them, and then cut and paste the group inline into the text flow. I want to be able to tag the graphic (complete with pointers and callouts) for an XML export. But I cannot tag a grouped object. I remember learning at the PeP conference in May that one way was to build the graphic with callouts in AI, and then place it into ID. But I already have an established workflow, with hundred of grouped inline objects in my ID docs.
    So I was wondering if there is a script that will allow me to export individual page page items as PDF or EPS. I know that you can export page items as JPEG, but I don't want rasterized text. Please assist. Thanks.

    http://www.automatication.com/index.php?id=13
    Bob

  • I am having trouble exporting my file as a pdf.

    I have a document which I am creating in indesign, about 100 pages long, with images, etc. Each time I try to export it as a pdf it crashes, and then when I try opening the pdf the error message comes up saying that Adobe reader could not open this file as it is not supported file type or has been damaged.
    This file is on my computer and has not been sent as an email.
    I use the Indesign cs6 and I am on a mac computer.
    The only thing I can think of is that I tried to save this file on a blank cd a few days ago. Maybe that is what caused this?
    I have tried everything I can think of, spoke to Adobe support, although still waiting for a call back from them.......
    Does anyone have any sound advice as I have a print deadline looming?!

    Well the PDF hadn't finished creating because InDesign had crashed - therefore the PDF that was created was incomplete.
    As with any file that constantly crashes - make a backup of it before you continue.
    First thing to try is to remove Minor Corruption http://forums.adobe.com/thread/526991
    If that doesn't work:
    To troubleshoot a file you should Export half the pages to PDF and then the other half.
    When one half fails you know which part of the book it is in.
    You can the do the same again - said it failed on export to 50-100 pages then export 50 - 75 pages - if that doesn't crash then try 76-100 pages.
    Divide and conquer.
    Once you know what page is causing the problem - you can try various things to get it to work - like
    resaving tiffs as psd and place the psd instead (or vice versa)
    Resave jpegs/png/gifs etc.  to TIFFS or PSD and replace them
    It might not be an image problem - it could be the Text Frame is corrputed and you may need to repace that text frame with a new one.
    It can be tricky to find out what's causing it.

  • How to start BPM process WSDL from WDA

    Hello,
    I need to start BPM Process from SRM ECC with WDA; i have been through this link ;
    http://forums.sdn.sap.com/thread.jspa?threadID=1643425
    also followed the pdf named 'Triggering NetWeaver BPM Process from ABAP' provided from SAP but still stuck on some issues;
    - I have a WSDL in order to start BPM process and works fine as i successfully call it from EP Java AS with WDJ..
    - What i need to do is to trigg it from SRM Screens so i need to call this WSD from ECC, so;
        When i try to create a consumer proxy using external wsdl option, after putting in WSDL Url it throws an error;
    Exception occurred in communication framework:Error in HTTP Framework:405 Method Not Allowed http://xxx.local:50000/bpm/de
    mosapcom/dccategoryappbpm/StartCatAppSI
    Exception of class CX_SLIB_HTTP_FAIL
    And this is error from BPM Logs for the same action;
    process()
    [EXCEPTION]
    com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
    at com.sap.engine.services.webservices.espbase.server.additions.SOAPHTTPTransportBinding.getAction(SOAPHTTPTransportBinding.java:581)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.overwriteConfiguration(RuntimeProcessingEnvironment.java:894)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:469)
    Also i found this link : http://wiki.sdn.sap.com/wiki/display/TechTSG/(WSR)Problems-P06/
    But no help so far,
    So, is there anyone faced similar or the same issue? Any suggestion will be appreciated.
    Regards,
    Yasin

    Hi soujanya,
    BPM server is not open to the internet but only intranet, so i will copy the WSDL code for you,
    will be glad if you can help;
    - <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.koczer.com/StartCatAppSI/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="StartCatAppSI" targetNamespace="http://www.koczer.com/StartCatAppSI/">
    - <wsdl:types>
    - <xsd:schema targetNamespace="http://www.koczer.com/StartCatAppSI/">
    - <xsd:complexType name="DetailsType">
    - <xsd:sequence>
      <xsd:element name="Category_ID" type="xsd:int" />
      <xsd:element name="Category_Text" type="xsd:string" />
      <xsd:element name="User" type="xsd:string" />
      <xsd:element name="Manager" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:element name="NewOperation">
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="Details" type="tns:DetailsType" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="NewOperationRequest">
      <wsdl:part element="tns:NewOperation" name="parameters" />
      </wsdl:message>
    - <wsdl:portType name="StartCatAppSI">
    - <wsdl:operation name="NewOperation">
      <wsdl:input message="tns:NewOperationRequest" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="StartCatAppSISOAP" type="tns:StartCatAppSI">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="NewOperation">
      <soap:operation soapAction="http://www.koczer.com/StartCatAppSI/NewOperation" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="StartCatAppSI">
    - <wsdl:port binding="tns:StartCatAppSISOAP" name="StartCatAppSISOAP">
      <soap:address location="http://zerbpmts.koczer.local:50000/bpm/demosapcom/dccategoryappbpm/StartCatAppSI" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>

  • Unable to initiate BPM process despite using script task

    Hi,
    I've created a BPMN process which I want to initiate through a script task - I followed the steps given in section 3.7 of the following doc -
    https://stbeehive.oracle.com/content/dav/st/HP%20personal%20workspace/Public%20Documents/BPMN_03_SalesQuote_Implementation.pdf
    but after deploying this process, when I go to BPM workspace using my user's login, I don't see my BPM process under list of applications. What could be wrong?
    Thanks,
    Harsh

    Hi Lavanya,
    Could you please tell me how you resolved. I am also getting same error.
    com.sap.glx.adapter.api.AdapterException: Process start failed due to TransitionException
    Thanks in advance.
    cheers,
    dev

  • Unable to call  BPM process in service bus

    Hi,
    I am exposing BPM process as webservice. Inside oracle service bus based on bpm process WSDL i am creating business service and proxy service. How to call BPM process? I am trying with sample client which is invoking proxy exported wsdl. But i am always getting echoed request. Any suggestions on how to call BPMProcess inside service bus?
    regards,
    PV

    I am not able to test my proxy using test console .. I am getting following error message
    The invocation resulted in an error: .
         <soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <soapenv:Body>
         <soapenv:Fault>
         <faultcode>soapenv:Server</faultcode>
         <faultstring>BEA-380002: CCHL-349940</faultstring>
         <detail>
         <con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
         <con:errorCode>BEA-380002</con:errorCode>
         <con:reason>Hostname</con:reason>
         <con:location>
         <con:node>RouteNode1</con:node>
         <con:path>request-pipeline</con:path>
         </con:location>
         </con:fault>
         </detail>
         </soapenv:Fault>
         </soapenv:Body>
         </soapenv:Envelope>

  • Triggering BPM process from ECC

    Dear All,
    I created a WSDL in BPM and consumed it in ECC . After that created a logical port using SOAMANAGER.
    While executing in the program(the code is shown below) or testing the service consumer  it does not give any error. but still process not starting up.
    REPORT ZTEST_BPM.
    DATA : lv_port type REF TO zco_abapwsdl,
            lo_sys_exception   TYPE REF TO cx_ai_system_fault,
            input TYPE ZNEW_OPERATION_REQUEST1,
            in TYPE ztest.
    TRY .
       CREATE OBJECT lv_port
         EXPORTING
             LOGICAL_PORT_NAME = 'ZPORT'.
    CATCH CX_AI_SYSTEM_FAULT.
    ENDTRY.
       input-in-first_name = 'ABCDEF'.
       input-in-last_name = 'G'.
    TRY.
       call METHOD lv_port->NEW_OPERATION
        EXPORTING
             INPUT = INPUT.
       COMMIT WORK.
       CATCH CX_AI_SYSTEM_FAULT INTO lo_sys_exception .
       CATCH cx_ai_application_fault.
    ENDTRY.
    write : 'Process Started'.
    Your input will be helpful.
    Thanks and Regards,
    Prabhu Karuppasamy

    Make sure that the user you are testing this with, has all the necessary roles and authorizations on the portal to Start a BPM Process.
    For all possible roles and authorizations related to SAP BPM, refer the following:
    http://help.sap.com/saphelp_nw73/helpdata/en/45/d7d0e08a164c5e87e4604ba89c632a/content.htm
    https://help.sap.com/saphelp_nw73/helpdata/en/9c/23eaeb4c53486f8d9c4cb376b99994/content.htm

  • Call Java Method from BPM Process

    Hi,
      I have defined a java class with set of methods , and I want to know if there is any way to call those methods from a BPM process..
    Thanks in Advance,,
    Best Regards,,
    Ola Essa..

    Use the spring component context in soa suite instead of ejb. Look for documentation in soa suite developer guide. Only if you have existing ejbs then use ejb adapters.
    See this http://www.oracle.com/technetwork/middleware/soasuite/learnmore/fivecoolusecasesforspring-1885529.pdf
    Vikram
    Message was edited by: VikramFusionApplied

  • BPM Process split, Or Split, Conditional, Multiple Gatways

    Hi
    I am New to this. Please explain what are these and when we use these (split, Or Split, Conditional, Multiple ) when developing a BPM Process. Also where we define rules in BPM

    The Studio documentation might help a little (download it from http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html -> click "PDF" beside the "BPM Studio Guide" link).
    At a high level, the Split activity speeds the process by allowing multiple parallel processing of an instance.
    The Or Split activity is similar to a Split but the Conditional transitions create the copies going through the circuit. Only if all of the Conditional transitions are false is the one Unconditional transition taken.
    The Multiple activity allows any number of instances to be created from a single instance using logic hit at runtime. This is useful in processes that must solicit information from a number of different sources and these sources may not be known until runtime (for example, collecting bids from multiple suppliers). Only one outgoing transition is allowed from a Mulitple activity. A Subflow activity is often used after a Mulitple, which enables you to send the copied instances to multiple processes depending upon the information you need to retrieve.
    All three of these must be paired with a Join activity. The Join activity rejoins the copies of the replicated instances with the original parent instance after they have completed the Split, Or Split or Multiple circuit
    The "Conditional" activity is similar to the traditional decision diamond that has been drawn on flow charts for years. Unlike the Split, Multiple and Or Split activities described above, the Conditional only has one instance flowing out of it via one transition at runtime. Typically in the process's design you might have a Conditional activity with an unconditional transition going to an activity downstream and a conditional transition going to another activity downstream. At runtime when the work item instance reaches the Conditional activity the work item instance either flows through the conditional transition (if it evaluates as true) or else the unconditional transition if the conditional transition evaluated as false.
    The key thing to remember is that coming out of a Conditional activity, the work item instance can only exit via one transition (one path). This is the different when work item instances leave a Split, Or Split or a Multiple activity. For these three gateway activities, copies of the work item instance can flow out of these activities via several paths concurrently.
    Hope this helps,
    Dan

  • Using Human tasks in a BPM process

    Hi
    I managed to deploy the VacationRequest sample which uses human task in a BPEL process.
    I want to implement the same human task in a BPM process. Are there any tutorials or stepswise guide for the Vacation Request sample using BPM process?
    Also, what are the main differences between a BPEL and a BPM process because most of the things that are done in BPEL can be done in an BPM process as well.
    Thanks

    I was able to implement the same using a BPM Process.
    For those of you, who may require the steps:
    1. Create a webservice based on the VacationRequest.xsd with VacationRequest as request and VacationResponse as CallBack
    2. Create a human task and task flow as described in the VacationRequest.pdf provided along with the sample.
    3. Create a BPMN process, associate the Start Event to the WebService Interface and map the request and response.
    Also associate the End Event to theWebService callback port.
    4. Deploy the process and taskflow.
    But I have a query here? Even in the sample given(using bpel process) how will the requestor know that the leave has been approved/rejected.
    what exactly is sent out as the response to the call back port. And, where can the requestor view the response?
    Regards

Maybe you are looking for