Export expenses and vendor invoices

Hi Gurus;
We have an export scenario, we are using TA order type, and we have some conditions like freight, insurance..
but we have a problem.
we don't how we can link vendor invoices with this sales order.
i want to use miro to enter freight invoice, which comes form my vendor.
But there is no PO. Because this is a sales operation.
What is the best way to add this fregiht and insurance costs to this material??
Thanks for all.

Hi,
From sales perspective create manual conditions for entering the Freight and Insurance values.
From MM perspective, you need to have a PO even though its a freight invoice. If you are planning of this option then you can copy the condition to SO through reference condition type.
Thanks
Krish.

Similar Messages

WBS Element in customer and Vendor invoices

Hi Gurus,
Is it possible to have wbs element in customer and vendor invoices, which will allow to see project wise invoices in FI reports?? If yes, how? And if no, what is the general business process for such scenario???
Thank You

Hi Mohit
I Believe this is possible yet not practical for the reasons there is no one to one match between WBS and Customers / Vendors. You can have multiple WBS for a single customer invoice / Vendor invoice.
Expert advice will follow soon
Regards
Mustafa

Payments and vendor invoices

Kindly help on the following situation..
1> Payments made to the vendor invoices
Which back end tables do I need to hit to find out the payment details made to vendor invoices were in time or not( over dues). I need to do an analyses report in various buckets of time on when the vendor invoices were paid
Thanks in advance,
Regards
Harsh

The tables will be AP_CHECKS_ALL and AP_INVOICE_PAYMENTS_ALL. For the date when the payment was made you need to see which date column is relevant for your case.
Thanks

Clearing between customer and vendor invoice with F110 transaction

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoice the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company code
Minimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind R

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoices the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit bal.still exist; see job log
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company codeMinimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind Regards
Emanuela

(very urgent)Difference of amount in vendor account and vendor invoice.

Dear all,
we are facing a issue related with vendor account actually MIRO post for the amount is showing difference compare with vendor invoice,
please consider this scenario:-
we are having vendor bill/invoice for Rs 1110/-
but in SAP amount is showing 1105/- showing a Rs 5/- difference
we found that this difference is showing becuse of we are maintaing material on single quantity whareas we got the price from vendor on BOX or bulk qty when we are deviding this price with the quantity the price will come on 4 decimals again here also we are maintaing two decimals.
from this we come to conclusion that this problem will occure again and again
so it is advaisable to create a LOSS DUE TO AMOUNT ROUNDIG OFF account and posting these differnce to this gl to clear the open item that is showing in vendor master.
Here please suggest me how to resolve this issue
a)for the current scenario we are having many MIRO which we sre posted having the difference of only RS 1,2,3,4,5,
this difference will come between this range only so please suggest me to resolve thisa issue
SU

Hi,
if you go to SM30, view V_169L, you can configure what is considered as a "small difference". Small differences are then automatically posted, see account configuration in OBYC.
However, I think this is designed if the vendor really invoices you a little bit too more or less. But in your case, this is not the problem. The problem is, as you have realized, that the price unit is set to small (actually, to 1 PC). The proper solution is not to post the differences away, but to stop this incorrect calculation. Small diffs should only be posted if there really were some small diffs!
Example: agreed price with vendor is 1,001 RS per piece. As you keep your RS currency with two decimals, the price in SAP would be 1,00 RS.
If the invoice is about 1000 pc, then the correct price is 1001,00 RS. This is what you see on the invoice and this is also correct. However, within SAP, you will see an expected value of 1000,00 RS only, so you have a difference of 1,00 RS.
You do not need to touch the material master to fix this. Only thing you need to maintain is the PO line, where you have entered the price as 1,00 (rounded!!!) RS by 1 pc. This must be changed like this: 1001,00 RS by 1000 pc. Then it will work fine.
Hope that helps, points welcome
Csaba

Unable to cancel Billing document and vendor invoice at once

Hi,
There is a customer invoice got generated through edi by company code 4000 to 8000.The cusotmer is 100100 and the company code to which it belongs is 8000 and simultaneouly a vendor invoice of same amount got generated automatically in company code 8000.The vendor is 200200and it belongs to 4000.
Now i want to reverse these whole entry. As here in the above, vendor invoice is got generated automatically, like that only we want that when we reverse the billing document, vendor invoice should automatically get reversed.
Can anybody suggest on this or any procedure to solve this.
With regards,
Shree.j

HI,
Furthur to this both customer and vendor are inter company related to each other.
With regards,
Shree. j

Very Urgent issue on credit memmo and vendor invoices

HI,
User here has a credit memmo for $ 395 of a vendor.We have received an invoice from this vendor of $ 95 in this week.Next week we will receive invoice for $ 100. Then upcoming week receive another invoice of $200.My question is when we received invoice for $ 95 i would like to make payment and wait for next invoices. But i want bank clearing to happen only after i receive all invoices. How do i keep track of these invoices . If i have hundred's of vendor's this way how to deal with this.Could anyone tell me how to clear these invoices which T.code..
Please help. Thanks in advance.

Point one is u said the vendor has a credit memo of $395 that means you are owing him right.
and lets go to youe example
Partial Payment: vendor is paying some amount now and remaining amount will pay in future
Ex: Vendor has to pay $395
and paying now 95 remaining 300 will pay in future till that 300 display as a open item
Residual payment:
Vendor have to Pay 395 but he is paying 300 means 95 he will not pay then it will go for residual payment.
95 will not show as a open item for that you have to create two accounts
1)Income account
2) Expenses account
for example:
1) You have to pay 4000 but you are paying 3800 means 200 is gain for you
2) You have to receive 4000 but you received 3800 means 200 loss
These two accounts you need assign in Automatic Account assignment:OBXL
Gain account CR side and exp account DR side
In your case it is accepting partial payment because the other amounts remains open items
F-44 is used to clearing of downpayment against open item( since creditmemo is kind of downpayment i.e you owe money to vendor
and ur doing Residual clearing in tcode f-53.
U have to enter the reason codes for the difference amount. check that .
hope this helps you....

What is the difference between Vendor Document and Vendor Invoice

Hi Gurus,
Can anyone please explain me the difference between Vendor Document (KA) and the Venodor Invoice(KR).
Thanks in advance.
Regards,
Dev Mahedra

Vendor Invoice is Book the invoice value in our book
but vendor document KA is transfer anything from one vendor to another vendor.
After closed the period, we can not reverse the posted invoice document, at that time we have to pass on journal voucher i.e *vendor document*
normally consultant gave the KA document for reversal.
with regards
muthuraj.g

Duplicate vendor Invoice check in FB60

Hi Experts,
I want to put the duplicate invoice check while posting the vendor invoice through FB60. I want the system to check the duplicate invoices in combination of the Vendor code and vendor invoice number ( we put the vendor invoice no. in the reference field of FB60 ). How to make this possible. I do not want to make the FI validation for the same. Can you please suggest how to go ahead with this.
Thanks,
BABA

Hi Shailesh,
phuu, ok, let's start from the beginning then.
Some theory first:
you need the validation because the standard check takes the doc.date ito consideration and this is not wanted. And you need the exit from the validation (! not a separate exit! not the original), locate the IF-statements where there is an ELSE option ending with function CUSTOMIZED_MESSAGE. It is up to you what to do here. In the original functoin module, the messages are issued here immediately. It can be an error or a warning, depending on the setting in table T100C. If my understanding is correct, you always want to see an error message, bt this should be done in the validation, not in the function module. So you should skip the customized_message function call and just issue the messages here as info message regardless of T100C settings. In this case, remove the function call customized_message (as many times as it occurs) and issue the message included directly as an information. Right after the message was issued, set E_RC to 4, infoming the validation that the check has failed. (Note that the customized_message function is only called if the check has failed, so no worry that you always get the message.
4. Define the exit for the validation
=========================
Go to your form pool Z_RGGBR000 (defined in V_T80D) and locate the statement APPEND EXITS. It should appear few times, locate the last occurence.
Right after that, enter the following:
exits-name = 'U901' .
exits-param = c_exit_param_none.
exits-title = text-901.
append exits.
This will define a new exit namd U901 for the validation routines. If in V_T80D, you already had a Z (or Y) report, check if the string U901 is used in that code already (check for the main program). If this is the case, instead of U901, use another name, it should begin with U followed by 3 digits. Also, you make sure the text symbol text-901 (or the 3 digits you are using) is existing, doubleclick it and enter a description like "Duplicate invoice check validation" or similar.
Well, the exit is published, we have to write the main code now.
go to the very end of your Z_RGGBR000 report and add a new form U901 like follows:
Duplicate invoice check validation
FORM U901 USING B_RESULT.
Vendor master flag
data: l_reprf like lfb1-reprf.
Result of function module
data: l_rc like sy-subrc.
Check vendor master first
select single reprf into l_reprf from lfb1 where bukrs = bkpf-bukrs and lifnr = bseg-lifnr.
Do not continue if flag is not set.
if L_REPRF is initial.
b_result = b_true.
endif.
check not L_reprf is initial.
Call modified function module
CALL FUNCTION 'Z.....your function'
    EXPORTING
      i_bukrs = bkpf-bukrs
      i_lifnr = bseg-lifnr
      i_waers = bkpf-waers
      i_bldat = bkpf-bldat
      i_xblnr = bkpf-xblnr
      i_wrbtr = bseg-wrbtr
      i_koart = bseg-koart
      i_reprf = L_reprf
      i_shkzg = bseg-shkzg
      i_xumsw = bseg-xumsw
      i_bstat = bkpf-bstat
      i_belnr = bseg-belnr
      i_gjahr = bkpf-gjahr
      i_blart = bkpf-blart
EXPORTING
      e_rc = L_RC.
Decide if validation message must be issued or not
if L_RC = 4.
b_result = b_false.
else.
b_result = b_true.
endif.
endform.
After this, activate the source code. Make sure you have defined the text-symbol 901 before!
5. Define the validation
=================
Go to OB28 now, and enter your company code(s) and the call-up point 002 (line item). If there is a validation defined already, you have to add a new step only, if not, you have to create the validation anew.
I assume there is no validation defined yet, so enter a name for the validation like FI_2 or similar. It should NOT be named DUPLIC or similar, i.e., you should not include the purpose in the validation name. This is because the validation is defined on company code / call-up point level and it may contain many steps for different purposes later. A generic name FI-2 or probably your company code followed by 2 (2 is the call-up point) is the best choice.
Before presing enter go to the last column Validatin active and enter 1 here.
Then press enter and you will get an error that the validation does not exist. No problem, go to menu path Environment --> Validation and let's create a new validation.
First, enter a description for your new validation in the right hand panel. Again, this should be a generic description, tell nothing about duplicate invoice checks here.
You may be asked here to assign a message class to the boolean class 009. You should enter here a Z message class where the validation message should be issued from. If no appropriate message class exits, open a new session go to SE91, enter a new message class Z... press create, enter a description. Then go to the Messages tab there, and create a new message with number 001 (NOT 000) and enter the message text there. E.g. Duplicate entry not allowed.
Coming back to the validation, if the message class was already assigned (this is the case if there was a validation defined earlier), you can create a new step. In case of a new validation, it will become the first step. But if there was already a validation in OB28 for your company code and call-up point 2, then it will be the last step. In the left hand panel, make sure the new (or existing) validation is selected and press the Create Step button (Ctrl-Shift-F5).
In the right hand panel, enter a description for your step. This is the point where you can enter Double invoice check or similar.
We have three parts here, a Prerequisite and a Check part, finally a message.
In the left hand panel, select the Prerequiste. This will activate that screen block in the right side. We have to make sure that our validation is called only for the relevant vendor line items, so press Ctrl-F3 to hange to expert mode ) and enter the following in the Prerequiste window in the right hand panel:
BSEG-LIFNR <> '' AND BSEG-XUMSW = 'X' AND BSEG-KOART = 'K' AND
BKPF-BSTAT = ''
Beware '' is a ' followed by another ' and not a single " !!
Then switch back to normal mode using Ctrl-F1 and check the small lamp below that should be green now. Also, you can see the field descriptions now. If the lamp is red, press Ctrl-F3 again, delete all and copy the above again. Do not bother with line breaks. Switch to Ctrl-F1 again until the lamp is green. OK, what we have told here was please call the validation only if we have a vendor number and if this is a sales relevant item (invoice or credit memo, but not a payment or similar, this is the standard logic as well), and the account type is vendor (K) and this is a normal document.
WHen you are done here and the lamp is green, then go to the left side again and select the Check part. Now you should be able to edit the Check screen lock in the right hand side again. Switch to expert mode and enter simply U901
This is the name of the form in your Z_RGGBR000 report. NO brackets, no spaces, only U901 here. Switch back to Ctrl-F1 and instead of U901, you should see the text of your form (text symbol 901 in report Z_RGGBR000).
Finally, click the Message part in the left side to be able to maintain the message in the right side. If you issued an error from the function module already, you can give here an information, or you can give it as an error if you like. The message number is one of the messages from your Z message class, you have to define the text in SE91 (see above).
When done, save the validation and you can test it immediately.
Here a brief summary what is happening:
OB28 setting defines that in your company code a validation like FI-2 or similar is active on line item level. Whenever a line item is abut to be created, the validation will be called.
However, the prerequisite of the validation is quite strict: only a limited number or vendor items will allow to continue, other line items (G/L, customer, not sales relevant vndor, etc.) will just skip the whole validation.
If the prerequsite was met, the Check part is carried out. Here we have the exit U901.
In the exit, first we check if the vendor is flagged for double invoie checks. If not, we quit and processing can be continued. B_TRUE means it is OK. If the vendor is flagged, we call the new Z function which is almost the same as the original one.
The Z function will check table BSIP, but it will skip the document date comparison. If the current invoice seems to be entered earlier (regardless of the doc.date), instead of the standard customized message (which can be E or W for instance), the very same standard message will be issued as an information. So the user will be informed about the previous document number but the processing won't be stopped. In addition, a return code will be set to 4, meaning check has failed.
Jumping back to the exit, if the return code is 4, we have to tell the validatin that the check has failed (B_RESULT = B_FALSE), otehrwise we can tell the validation that the check was OK (B_RESULT = B_TRUE).
Now we are back in the validation, and, depending on B_RESULT, we just continue processing (B_TRUE), or issue an error message from a Z message class (B_FALSE). As the main standard message was isued already from the Z function, the user should know at this stage what the matter is. Your Z message can be a bit generic one, no need to include the vendor number or the previously issued invoice, etc.
Hope that helps, points welcome
Csaba

Adding Multiple Vendor Invoice at time MIRO Transaction

Dear Experts,
I am facing a problem whereby the users want to to add hundreds of Vendor Invoices and there corressponding date when at the time of MIRO transaction.
Currently in standard there is only one field for the Vendor Invoice No and Vendor Invoice Date.
Please advice as if how to give the provisions to user so that they can enter multiple(20 or 30) vendor invoice no and corresponding vendor Invoice dates at time of creation MIRO Invoice.(T-Code : MIRO)
Many Thanks In Advance.
NINAN

Hi,
For invoice verification of one vendor with many inovice at the same time in MIRO, select vendor insted of Purchase order / Schedukle agreement after selecting vendor , then click on more allocation criteria, after that a new pop window will open enter the plant and vendor code and click on adopt then system will select all the PO for which invocie verification is not done then select all the invocie u want to proceed,
Hope this will solve your rpoblem.
regards,
zafar

Consignment Vendor Invoice Amount Adjustment

Dear All,
Normally in SAP, The vendor invoices for consignment in purchasing is posted from MRKO. There is no invoice posting from MIRO.
In MRKO, after entering the selection details, we choose SETTLE for processing type, then we run it and vendor invoice is posted.
So I wonder how can our client make some adjustments for very small differences in the price ? Because normally there may be some differences like 0,50 EUR because of the roundings. So how will these difference amounts will be posted ?
Thx in advance

Hi,
MR11 shows the amount for GI/IR account if there is any.. But in consignment case.. you put the price to inforecord, then withdrawals occur. According to these withdrawals you settle the vendor invoice. But the price is already captured from the inforecord. When you settle it, SAP assumes the price as the inforecord price. That is ok. But because of the roundings (because it is only two digit after comma) the real vendor invoice may be different like 0,50 eur (for example you posted 300 EUR, but real invoice is 300,50 EUR)
This happens very frequently for our customer. So MR11 is useless for that case. There shall be some other trx to make these differences to be posted. So how will the 0,50 EUR posted ? This 0,50 eur will not appear in MR11

Vendor invoice and logistic invoice verification ?

Good morning Guru,
What is the difference between "vendor invoice" in accounting module and "logistic invoice verification" in MM module ?
I know logistic invoice verification to validate between po, gr and invoice, but what vendor invoice for ?
Thank's

Hi
Accounting-wise both has the same result as in both the scenarios you can debit expense and credit vendor. The advantage of Logistics Invoice Verification over Vendor Invoice is, in Logistics Invoice verification, we have three way matching of documents ie PO,GR and Invoice. So if there is any mismatch between these, the invoice will get blocked for payment. Also it checks for accuracy between PO and invoice and GR and invoice, so that the expenses are accounted accurately and price diff account also effected appropriately.
In Vendor invoice booking, it is just like your normal journal entry and so it has not got that much authenticity over the correctness of transactions. In vendor invoice booking, there is every possibility of duplicate booking of invoice, whereas in LIV, the invoice will get blocked for payment.
Hope it is clear.
Regards,
K Lakshmanan

Document clearing required in vendor invoice in FB60 and MIRO

Hello Experts,
I am posting one vendor invoice. I want to distribute one vendor invoice between two profit centers. Now SAP is posting following entries:
Expense A/c... Dr (Cost Center: 100001 / Profit Center: 1000) - Rs.5000
Tax Receivable A/c... Dr (Profit Center: 1100) - Rs.400 (Default profit center for this GL is pulled from FAGL3KEH)
    To Vendor A/c (Profit Center 1000) - Rs.5000
    To Vendor A/c (Profit Center 1100) - Rs.400
In above entry, vendor line item is getting divided into two profit center. But my requirement is that, system should not vendor line item in two. It should post using document balance clearing A/c. Desired entry is:
Expense A/c... Dr (Cost Center: 100001 / Profit Center: 1000) - Rs.5000
Tax Receivable A/c... Dr (Profit Center: 1100) - Rs.400 (Default profit center for this GL is pulled from FAGL3KEH)
Document Splitting clearing A/c... Dr (Profit Center 1000) - Rs.400
    To Vendor A/c (Profit Center 1000) - Rs.5400
    To Document Splitting clearing A/c (Profit Center 1100) - Rs.400
Please help me in achieving the above set of entries. Following and attached are the settings done for document splitting:
1. Vendor GL account is marked as 03000 (Vendor) without overridden tick.
2. Tax GL account is marked as 05100 (Tax on Sales / Purchase) without overridden tick.
3. Expense GL account is marked as 20000 (Expense) without over ridden tick.
Please look into it and provide with your inputs

Hi Deepak,
check document splitting for gl a/c give vendor recon a/c gl and give item category as vendor.
also check doucment type which you are using it should be vendor only.
when ever you use document splitting don't use standard one copy it do the modifications.
Regards,
Raman

Expense Report Export does not create Invoice in AP

Hello,
I have created several expense reports in AP (Running EBS R12, I am not using iExpenses), but when I use the Expense Report Export request, the invoices are not created. I have looked online and found some plausible solutions. None of them have worked: I've made sure the Employee payment method is set up; the Usage rules for payables are also set up for Employee Expenses in the payment processing transaction type. In the Payables Option screen, I have selected the Automatic Employee as a Supplier option.
Here's the Expense Report Export log:
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXEXPER module: Expense Report Export
Current system time is 29-APR-2013 11:09:53
**Starts**29-APR-2013 11:09:54
**Ends**29-APR-2013 11:09:55
Start of log messages from FND_FILE
Begin Receipts Management - Holds
Process Hold Each Scenario
Determine whether to place Holds
Process Hold All Scenario
Determine whether to place Holds
Process Hold BothPay Scenario
Determine whether to place Holds
Process Obsolete Holds
Obsolete Holds
Obsolete Both Pay Holds
Begin Processing Individual expense reports
Fetching expense report...
Expense Report Number : **110**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **REEMBOLSO 25ABR2013**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_ASTRID_EXPENSE**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_EXPENSE_AGSV**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **101**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Credit Card Expenses Fetched = 0
Credit Card Invoices Created = 0
Call Payables Open Interface
Expenses Fetched = 5
Invoices Created = 0
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 4105067
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-APR-2013 11:09:55
What else do I need to do? Am I missing something?
Thanks in advance,
Astrid

I found the answer and I am posting it here in case someone else needs it:
You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
Regards,
Astrid

Link Between AP Expense Reports and ap invoices tables

hi all
we create expense reports in AP then run the expense report import program to transfer them to the invoices
i know them through
the invoice number entered in the expense report and the invoice number in the invoices table
and the employee in the expense and the vendor in the invoices(through the employee table)
BUT,
some times we change the invoice number after the expense transfered to the invoice
i ask if exist relation columns between ap_expense_report_headers_all and ap_invoices_all directly?
thanks.

ap_expense_report_headers_all.VOUCHNO = ap_invoices_all.INVOICE_ID
Hope this answers your question,
Sandeep Gandhi
Omkar Technologies Inc,
Independent Techno-functional consultant

Export expenses and vendor invoices

Similar Messages

Maybe you are looking for