Export/Import configuration data/ other details in CUP, SPM and ERM

Hi experts
How we can export the connectors, Workflows, initiators, stage , approvers , configurations from CUP, ERM, SPM Development to their production system ?. We have option to export configuration data and connecters option in RAR but option is not seen in CUP, ERM or SPM . Is there a way? I am on AC 5.3 SP5. Is it planned for any future SP release ?
Thank you.

Hi Sahad,
- in SPM, there is no configuration but the connectors. You can just create those in one place (no point in even doing it in a test system)
- in ERM, there's also little value of testing. You might as well only configure one system and keep the audit information consistent.
- CUP has an export configuration option. Unfortunately you always have to export a whole tree, whereas you might probably only want to export a few items of a workflow configuration (most likely the stages). Almost all of the other configuration (approvers, connectors etc. is either trivial or different in the production system anyway (you usually work with test users in DEV, at least that's my experience).
Frank.

Similar Messages

Issue with Export / Import Configuration Data in AC 5.3 migration to AC 10

Hi,
We are migrating from AC 5.3 to AC 10. As per the Migration Guide I have exported the data from AC 5.3.
The export created around 57 files on the destination with .dat extension.
Moved these files to target server Import location.
Then I have used the utility (GRAC_DATA_MIGRATION) in AC 10. Selected the Import location. and clicked Get Files.
It has uploaded some files (21 out of 57).
When I analyzed the uploaded files, I found it has uploaded only "Common Configuration" data. For the below Objects, though the export utility has created files, Import utility did not uploaded the files.
1. Business Unit
2. Critical Roles and Profiles
3. CUP Role Repository
4. Mitigation Controls
5. SOD Rules
6. Workflow
Does anyone have any idea about this issue?
Regards,
Deepak

Deepak,
Can you share with me how you are importing the config data? How you are using the path? Please share this and also try toshare how you systems are distributed.
Regards,
Faisal

BAPI to update EIKP (Foreign Trade: Export/Import Header Data)

Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivas.

Hi Sreenivas
Try the FM EXPIMP_POSTING
Pushpraj

BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data

Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivasa Chary Bathoju.

Dear Sreeninvas,
You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

Using LDIFDE to Export/Import configuration

Hi All,
I need to create a "copy" of a domain using LDIFDE. To do that, I exported the Configuration, Schema, OUs, Users and Groups. I'm having plenty of troubles during the import, so I wanted to clarify a few things:
1) What order should the data be imported in? I was thinking importing Schema, then Configuration, then OUs, followed by Groups and finally Users
2) Is there an easy way to remove the extra spaces from the LDIFDE extract? I did a search and replace in notepad to change the domain from DC=abc,DC=com to DC=xyz,DC=com, but there are lines where the original DC is split which is a royal pain to clean
up!
3) When doing an import from Schema or Configuration, I get this error
PS C:\tmp> ldifde -i -f .\schema_export.ldf -v -j C:\tmp\
Connecting to "mydomain.xyz.com"
Logging in as current user using SSPI
Importing directory from file ".\schema_export.ldf"
Loading entries
1: CN=Schema,CN=Configuration,DC=xyz,DC=com
Add error on entry starting on line 1: Unwilling To Perform
The server side error is: 0x2079 The specified instance type is not valid.
The extended server error is:
00002079: SvcErr: DSID-03330968, problem 5003 (WILL_NOT_PERFORM), data 0
0 entries modified successfully.
An error has occurred in the program
I can't figure out why this is happening.
Any help will be much appreciated :)

> I need to create a "copy" of a domain using LDIFDE. To do that, I
> exported the Configuration, Schema, OUs, Users and Groups. I'm having
> plenty of troubles during the import, so I wanted to clarify a few things:
Why would you need to import schema and configuration? And why do you
not simply join a DC to your domain, take it down and do metadata
cleanup, then start this new DC in its own environment? Much simpler
than your approach, I believe :)
> 1) What order should the data be imported in? I was thinking importing
> Schema, then Configuration, then OUs, followed by Groups and finally Users
That's what I would think, too.
> 1: CN=Schema,CN=Configuration,DC=xyz,DC=com
> Add error on entry starting on line 1: Unwilling To Perform
"Add" for what? What's the content of this file?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Export/import character data conversion in NLS_LANG FAQ

The [OTN NLS_LANG FAQ|http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm#_Toc110410566] says:
>
In Oracle9i the Export utility always exports user data, including Unicode data, in the character set of the database. The Import utility automatically converts the data to the character set of the target database.
>
But I don't think this is correct for Oracle 9i. Example:
export NLS_LANG=AMERICAN_AMERICA.US7ASCII
sqlplus /
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Jun 17 10:05:57 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
JServer Release 9.2.0.6.0 - Production
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for HPUX: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER                      VALUE
NLS_CHARACTERSET               WE8ISO8859P15
NLS_NCHAR_CHARACTERSET         AL16UTF16
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
JServer Release 9.2.0.6.0 - Production
exp / owner=test file=test.dmp
Export: Release 9.2.0.6.0 - Production on Wed Jun 17 10:06:42 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
JServer Release 9.2.0.6.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P15 character set (possible charset conversion)
About to export specified users ...Could you please:
- check and update NLS_LANG FAQ for Oracle 9i
- update NLS_LANG FAQ for Oracle 10g, Oracle 11g and Data Pump.
Thanks.
Edited by: P. Forstmann on Jun 17, 2009 10:14 AM

I was wrong and you are right like the OTN NLS_LANG FAQ.
I made the following test with Oracle 9.2.0.6 and with Oracle XE:
sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Ven. Juin 19 10:20:23 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connecté à :
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create table t (x varchar2(10));
Table créée.
SQL> insert into t values(chr(233));
1 ligne créée.
SQL> select * from t;
X
é
SQL> select dump(x,1017) from t;
DUMP(X,1017)
Typ=1 Len=1 CharacterSet=WE8MSWIN1252: e9
SQL> exit
Déconnecté de Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
set NLS_LANG=AMERICAN_AMERICA.US7ASCII
exp test/test tables=t file=t.dmp
Export: Release 10.2.0.1.0 - Production on Fri Jun 19 10:21:54 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8MSWIN1252 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table                              T          1 rows exported
Export terminated successfully without warnings.
sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 19 10:22:07 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> drop table t;
Table dropped.
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
imp test/test tables=t file=t.dmp
Import: Release 10.2.0.1.0 - Production on Fri Jun 19 10:22:23 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
. importing TEST's objects into TEST
. importing TEST's objects into TEST
. . importing table                            "T"          1 rows imported
Import terminated successfully without warnings.
sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 19 10:22:32 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select dump(x,1017) from t;
DUMP(X,1017)
Typ=1 Len=1 CharacterSet=WE8MSWIN1252: e9

How to export/import configuration

I've just got myself a shiny new SSD as a secondary internal drive and I've decided to start afresh and install everything (kinda) from scratch. I've made the SSD the new boot drive and I have the old internal HD there with everything on it still.
I just can't work out how to copy all the (numerous) websites and settings across to Server on the new drive though?
Surely there should be some sort of export/import system?
Any help massively appreciated.

I was searching up and down for this functionality myself. It's not available from the GUI (shame!)
Use the command line:
sudo serveradmin settings all > outfile.txt
Instead of all you can also specify a specific service. Importing the settings into the new machine is done in a similar way. Look for examples in the man page for serveradmin.
Hope this helps
---markus---

Export the master data from the existing B1 DB and importing to a new B1 DB

Hi
Is there any way to export the master data like item, GL, Business partners from the existing B1 database to a newly created DB. (export from the exissitng DB to a new DB as such) so that all the data will be available in the new DB without transactions
Thanks in advance

Dear Sanath
You may use CopyExpress Add on to do the same . Here you can copy masters from one Database to another with out transactions . This process is very easy also. Some of the customizations also u can do the same way.
Thanks and Regards
Rashid

EXPORT/IMPORT TABLE DATA FROM ONE SCHEMA TO ANOTHER ONE (S.O.S)

Hi,
I urgently need your help:(, I have two different instances, in each of them there are two schemas, A and B; which tables are the same, but I need to transfer JUST the table data from A's tables to B's tables, how can I do so??
Thanks in advance,
Isabel

The total number of tables is 989:(And how many do you want ? If 988, and if you're on a 10g db, you can use exclude parameter from expdp/impdp?
Nicolas.

SUBMIT/EXPORT/IMPORT/ Specific layout data

Hello Everyone,
I would like to know if we can import the data (specific layout) after using submit and export.
My requirement is iam submitting RFITEMGL(FBL3N), exporting the list to memory and importing into my program. The data i am getting is as displayed just as when we run fbl3n independently.
Now in FBL3N, i can display posting date( which is not on standard display) by selecting change layout (CTRL+F8) and selecting specific field for dispaly.
My requirement is I need that posting date in my program by using submit/export/import.
Is it possible anyway?
Regards

Hi,
I have a similar requirement.Can u pls let me know how did u resolve it?

How to import the data to Data manager

Hi All,
I am new to MDM and need your help in handling the following issue
In our setup we are sending the Customer master data from R/3->XI->MDM (R/3-> XI IDOCs, XI->MDM XML files).
with the help of extraction job in R/3 IDOCs r generated and XI has onverted these IDOCs to XML Files and created at MDM Server. Now my Question is how to import the Data from these XML files to Data Manager !!!!
Note : Import Map settings are done already in the system.
Can any one help me the steps requeired to get this data to Data manager .
and am I need to do some activity in MDM to import the data to Data manager each and every time or is there any automatic way of doing this .
Please guide me.
Thanks in advance!

Hi MDM User,
Generally there are 2 cases while importing the data,
1) Initial Load
2) Delta Load
Initial Load means importing the data into MDM at first time.This is usually done by manual importing
without using import server.
Delta Load means importing the data into MDM when we have changes to existing data or added new data
to existing data.This is usually done by automatically using import server.
To manually import the data,just create a remote system and port in console and login into import manager
using remote system.Create ,save the map and execute the map.There is no other configurations needed.
To automatically import the data without manual intervention,we go for import server.
To let this happen we need to set some configuarations in mdis.ini file of import server.
Give the repository name,username and password which are set in console for that repository and also
give schedule time based on which import server picks the file from ready folder.
Go to the import manager , change the map and import action depends on your requriment and save that
map.
and also you need to set port type as inbound and automatic and select the map which you saved earlier in
MDM console.
As soon as we start the import server, it picks the file from ready folder of MDM server based on
configurations which we set in mdis.ini file and executes the map.
Here i am giving complete path of ready folder.
SAP MDM 5.5> Server>Distributions>bp1bocap080.bp.co_MSQL> BP3_PoC_Customer> Inbound>Siebel> SIEBEL_OB_CUS_SIEBELCUS01> Ready)
This path has to be given in target directory of receiver communication channel of XI so that it puts XML
file in the above path.
For better understanding,go through below blogs.
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
Hope it helps
Reward points,if found useful
Thanks
Narendra

Exporting/Importing applications

I'm having issues importing the applications I build from one Schema to another. It sees that only the forms are exported but not the table? Does anyone know why that is?
Thanks,
Micah

Hi Michah,
>
I'm having issues importing the applications I build from one Schema to another. It sees that only the forms are exported but not the table? Does anyone know why that is?
>
Bot just the Forms, it will also include Reports, Shared Objects , et al.
You only export the application from application builder and hence only the application gets imported. That is by design.
You have to use Generate DDL in SQLWorkshop > Utilities and use that script , or any other means, to move the database objects from one schema to other. If you want to transfer data then you need to export/import the data as well.
To put together the installation and de-installation package use Supporting Objects.
Regards,

Any solution to import dreammail data to thunderbird

I've been thinking to migrate to thunderbird from years but there is nothing to import my data :( I have been using DreamMail and it contains all my email data... but unfortunately it does not allow to export data to any other email client neither other clients support to import DreamMail data..... that's a big problem :(
Can you please advice me any possible solution?

I think you can export mail from DreamMail in eml format, and if so you can import eml files to TB by dragging them from e.g. the desktop and dropping them in a TB folder.
DreamMail contacts can be exported to a csv file, and the csx can be imported to TB: Tools/Import...Address books...Text file...Files of type: comma separated. You may benefit from editing the csv in e.g. a spreadsheet before importing:
http://kb.mozillazine.org/Import_address_list_from_text_file

Reduce export import time

Hl All,
I want to reduce the total time spent during export-import.
Restrictions:
=========
1)Cross Platform
2)exp and imp from lower version to upper version
3)No 10G database
Basically i want to do exp and imp in parallel so it reduces the total time spent on this activity. I thought of doing schema level exp-imp in parallel but i am afraid of the dependencies.
Is there any other way to achieve the same or if i go with the above specified approach, can anyone provide some valuable inputs to that.
I am trying to automate the above so that it becomes one time effort and rest all the times it(script) should do at his own.
Thanks and regards
Neeraj

Hi All,
Data volume is not less than 60GB and not more than 150GB.
If i use a pipe on unix in between exp-imp what if my exp is slower at any
point of time and import is faster(Any reason)?
is import going to wait for the contents coming into the pipe through export or import will fail.
I can consider creating indexes using the flat file.
is there any way to get only the indexes in the flat file, i mean if i use indexfile
option for import it gives me "CREATE TABLE..." statements too which means import utility is reading full
dumpfile and giving me the output, i want only the "CREATE INDEX..." statement in the flat file.
What about the schema level export and import?
Any valuable inputs or proper steps from anyone out there
Any restrictions while importing the schema's.
Thanks and Regards

It is possible to have a dynamic Oracle Label Security procedure/script to configure data label (compartments and data label) for multiple rows at same time?

A single script which can be run below mentioned commands... instead of using multiple manual steps for configuring data labels. Is that possible and how? Having bulk of data where OLS need to be applied.
exec LBACSYS.SA_COMPONENTS.CREATE_COMPARTMENT
exec SA_LABEL_ADMIN.CREATE_LABEL
exec SA_POLICY_ADMIN.APPLY_TABLE_POLICY

Have you ever answered this question? If not, have you tried to use the "HIDE" property on your table_options?

Export/Import configuration data/ other details in CUP, SPM and ERM

Similar Messages

Maybe you are looking for