Export Problems! Estimated time keeps going up!

Hi Everyone. I have a project that suddenly will not export. When I try to use Quicktime conversion
or even the other export options the export gets stuck at 7 percent while the estimated time keeps rising from one minute to 5 hours then on and on.
I'd appreciate any advice you could give me.

Yes I have exported it with no problems before. I even tried to use previous saves but it does the same thing. No matter what compression I use this problem occurs. Ideally I'd like to export to uncompressed 10 bit but I'm trying other compressions (such as H264 and mp4) right now because they typically export faster.
I'm leaving it to render now I'll give it an hour or two to see if it goes past zero percent.

Similar Messages

  • Date and time keeps going missing!

    Hi everybody, my date and time keeps going missing from the top bar every time I turn on my mac - sometimes other things go missing, like the airport status.
    It used to happen just once a fortnight but after I installed the latest security update, it seems to be happening every time. Does anybody have a reason/fix? Would be much appreciated. Thankyou!

    Hi appleoclock, and a warm welcome to the forums!
    Not sure this works since that Qursical update, but the cure for that used to be...
    Apple Menu Bar Icons Gone
    You've probably got a couple of corrupt preference files.
    In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
    In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
    This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).

  • Apple TV Export Calculating Estimated Time Lockup

    Looking for some help here... I am exporting video from QTPro to Apple TV. Just recently, when I go to FILE/EXPORT choose Apple TV then OK, the export dialog comes up but says "Exporting -- Calculating Estimated Time" and just sits there for a short 100MB HDV - Apple Intermediate Codec file.
    Any thoughts? This work fine since upgrading to 7.1.5 until just today. Tried repairing permissions, re-installing QT 7.1.5, reboot, did not help.

    I found that if I copy and paste the original file into a new QuickTime movie, the export worked as it should. I wanted to post a followup in case anyone else encounted this issue.

  • I have a powerbook problem is it keeps going 2 a black screen  about 1.5 min right before that happens the fan moter turns on how can i stop that from happen

    I have a powerbook g4 that i just bought the problem is it keeps going 2 a black screen every 2min or so when i am on the internet.now right before that happens the fan moter goes on .to get back 2 the page i was on i have 2 hit the return key this is a problem. can any one help me with this problem

    Powerbooks have heat sensors that control the fan. The fan can run and not be heard unless the speed increases. If the powerbook thinks it's getting to hot it can start going into a shutdown mode.Thats a safety feature. Now if the sensor is reading heat wrong you might need to  reset you PMU- power management control. since I don't know what model powerbook you have, I need to refer you to the apple article on it. http://support.apple.com/kb/HT1431

  • Why does the export time keep going up?

    I'm exporting a movie I made and it's about 54 minutes in length and when it first started to load it said about 350 minutes or more and now its been loading for well over an hour and a half and I saw it go down to like 315 minutes and now its going up to 329 as we speak. Is this normal? Thanks

    Is this normal?
    Frequently yes, it is. Compression formats like H.264 are very CPU intensive to begin with and, depending on the content being converted at any given moment may, depending on your computer, be only processing say 12-15 frames per second. With a change is scenery, this figure may double or be halved at any instance in time. Since the estimated time to completing is constantly be recomputed and updated, this estimate can vary drastically. For instance, most files start off with a black slug period that processes very quickly but then runs into a more graphically complex scene with or without dramatice changes in vector motion. This greatly slows down the processing and you begin to see wide swings in these estimations. However, as the conversion compress the excursions on the "average" estimation become less varied and more accurate.

  • Countdown Timer for Fileserv pauses when viewing other tabs, resumes when returned to tab. Is there any way to make the timer keep going?

    Hi, when I use Fileserv to download files, it has a countdown timer like many file-hosting services. However if I go view other tabs while the timer is going, it gets paused until I come back to the tab and then it resumes.
    For example, I download a file and the timer starts from 30 seconds, at the 25 second mark I view a different tab (lets say to check my email), and after about 40 seconds or so I come back to the Fileserv tab and it's just counting down from 25 seconds.
    This didn't happen before when I was on 3.6.
    Is there anyway to keep the timer going? As 30 seconds is precious enough to check an email or blog while I wait.

    Maybe it keeps working if you tear off that tab and open it in its own window.

  • All my downloaded(digital copy) movies will no longer play in itunes, i get a black screen, and no sound, but the time keeps going. how can i fix this?

    All my downloaded (digital copies from dvds) won't play in itunes. I get a black screen and no sound, but the time keeps moving. How do i fix this?

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • Date and time keeps going to Dec. 1060's

    iPod 4 date and time keeps locking up to the 60's and won't hold actual date. Changed account info and does not recognize it, keeps returning to the old account. Multiple family members on the account and our game progress messes up everyone else's. Help!!!!

    Hi appleoclock, and a warm welcome to the forums!
    Not sure this works since that Qursical update, but the cure for that used to be...
    Apple Menu Bar Icons Gone
    You've probably got a couple of corrupt preference files.
    In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
    In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
    This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).

  • System time keeps going off

    Last time i did pacman -Syu, the rc.conf.pacnew had some changes to the time settings. Instead of America/Vancouver, it had Canada/Pacific and instead of localtime it had UTC. I thought that looked ok so I made the changes. A while later I noticed that my time was off by a few hours (right now 17:20 instead of 22:30). I googled and man'd a bit to figure out how to set the date/time with date -s and hwclock -w (is this right?). That had me satisfied for a while but then next time I booted up, time was off again. This time I concluded that the new settings were the problem so I reversed them back to localtime and vancouver. I shut down and restarted. It came up with the correct time, so I assumed it was fixed. But then the next time I used my computer (now) I noticed it was off again.
    So I don't know what's up. I've done a bit of googleing and wikiing but I can't find much. Has anyone seen this? Is there some script somewhere that says "if he's not looking, reset the time"? There's probably some simple thing that I missed...
    By the way, in case this is a hardware problem, I'm using a toshiba satellite 1800.
    Also, if this is the wrong board, please move me.

    bernarcher wrote:Did you try this: Time Skew in the "Time" wiki?
    Ok this may be what I was lookign for. I just did this, we will see how well that works out.
    As for the BIOS clock thing, thats the same as hwclock right?
    Any other ideas or links? For when I find out that didn't work.

  • Audio keeps cutting randomly (but timer keeps going) in all devices (mac, android, pc and ps3).

    Hi guys!   Anybody having the same?? It is like i'm working with a poor connection, audio cuts every minute. I thought that might be the connection but I see the time counter running while audio is out! I've tried reinstall, but it is happening with all devices.  ps: i have a nice internet connection (50mbps optic fiber) Thanks!

    Hello, i have similar problem that has been disappeared when i switch back FROM 1.0.9.133 TO 1.0.4.90.g0b6df40b.
    Version 1.0.4.90.g0b6df40b could be found on filehippo.
    I have blocked automatic client update and at the moment all works fine.
    To block automatic update put a file named Spotify_new.exe as READ-ONLY in the spotify program folder.
    I think spotify developers spent too much time on social networks while write code or they could be drunk.
    I dont know and i cannot accept it.
    If my company works with this "quality" surely we close out of business in a day!

  • Face time keeps going off for not reason

    Out of the blue I will hear a ding sound and the screen will say Face time and a contact name I have had used face time.  it has never been a time when the friend was calling me.   ??

    bernarcher wrote:Did you try this: Time Skew in the "Time" wiki?
    Ok this may be what I was lookign for. I just did this, we will see how well that works out.
    As for the BIOS clock thing, thats the same as hwclock right?
    Any other ideas or links? For when I find out that didn't work.

  • Is there a fix for my video and audio stopping in the middle of playing but the video timer keeps going

    This happens on YouTube, Safari and Music videos. I just got my iPhone 5s a week a go and this has been a problem since day 1. My phone is not jailbroken. Let me know if there's any other relevant information that would be helpful in answering this question.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You may have switched on caret browsing.
    *http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    *Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    *http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • I set password on my iphone4 and forgot it immediately... tried typing in a code over and over.. luckly my phone is not locked.. the time keeps going up higher and higher each time im incorrect.. what can i do?

    I set a password on my iphone 4. I made a huge mistake some how. I cannot remember the password. i tried numerous time and the time allowed started getting higher and higher. luckly my phone is not locked.. what can i do to get out of this mistake?

    Do as the manual says to do and restoer the iphone

  • My internet keeps going off

    getting sick of my internet going off all the time could it be mt computer its slef HELP 

    I have the same problem, my internet keeps going on and off too, its been happening over the last 3 months it ALSO HAPPENS TO MY NEXT DOOR NEIGHBOUR I highlight this because the script reading so called helpers at sky keep blaming my computer/router/filters/wiring I am an IT engineer and it stuns me that both myself and my neighbours have the exact same problem yet there is no fault on the line (so they say) it has got to a point where i cant watch a movie on netflix or skygo without interuption. Paying for 10mb and getting bloody dialup connection and so called help from what can only be described as amateurs. I have to be honest sky have gone from being one of the better providers to probably the worst.My suggestion is do as I am going to do and change providers.

  • Rather than go to the home page I have specified in the General tab of Options in the Tools menu, Firefox keeps going to a truncated version of this url.

    I have used the following URL as my firefox home page for quite some time:
    https://www.google.com/search?num=100&safe=off&hl=en&complete=0&q=Rochester-NY+CDC.gov+|+NIH.gov&btnG=Search
    Several months ago, malware of some sort replaced this url with one of their own. I got rid of the malware and put back my original home page, but I'm continuing have a problem: Every time firefox goes to my home page, rather than using the whole url that I've specified, firefox truncates this url to just the first 87 characters, and goes to this truncated url instead:
    https://www.google.com/search?num=100&safe=off&hl=en&complete=0&q=Rochester-NY+CDC.gov+
    Not only is this not the url that I have specified in the General tab under Options in the Tools menu, I always get an error message in an additional tab whenever Firefox goes to this truncated version of my home page. Can anyone tell me what I need to do to get firefox to use the entire url I have specified as my home page in the General Tab under Options?
    I do not know if this is relevant or not, but I noticed that prefs.js includes two other user prefs related to the home page in addition to the one that identifies the url I chose:
    user_pref("browser.startup.homepage", "https://www.google.com/search?num=100&safe=off&hl=en&complete=0&q=Rochester-NY+CDC.gov+|+NIH.gov&btnG=Search");
    user_pref("browser.startup.homepage_override.buildID", "20130617145905");
    user_pref("browser.startup.homepage_override.mstone", "22.0");

    You need to escape the pipe character as %7c if you want to include it in the URL

Maybe you are looking for