Export-Quicktime-DVPAL 48kHz anamorphic settings for 16:9???

I have project I filmed on a Sony PD170 in 16:9, brought it into FCPHD and changes sequence to 16:9 looks fine for what I want.
Now when I export it out for DVDSpro I use the "Export-Quicktime-DVPAL 48kHz anamorphic" setting when I look at the file in QT 7 it is stretched vertically????
First of all why? Then when I go to DVDSpro when I create new project should I have it on "force to letterbox or Pan Scan"? The Simulator is set for 16:9 but when I simulate the DVD the film in back to 4:3 any guidelines would help
Many thanks

Hi Allister,
Yes it is stretched vertically and correct. DV PAL is always (no matter if 4:3 or 16:9) 720x576 pixels. The displaying device or software has to stretch the image horizontally to compensate for that during projection.
In DVDSP you should set the display mode to "16:9 Letterbox". The Simulator will always start-up with the setting specified under Preferences-Simulator. If it says 4:3 there, you have to manually set it to 16:9 before playing.
HTH,
Uwe

Similar Messages

Exporting quicktime with 4 audio tracks for broadcast

Hi,
Does anyone know how to do this? i need to get a program out to a broadcast quicktime file with sync on 1&2 and M&E on 3&4, i have the sequence setup correctly as did a digi playout for the same thing which was fine. However, if i do 'export quicktime' with sequence settings i only get two audio chanels. If i go to quicktime conversion then all the drop down menus for multiple audio chanels are greyed out.
Any ideas?
Best,
GK

if i do 'export quicktime' with sequence settings i only get two audio chanels
how are up you assessing this? QT Player has only 2 playback channels and additional channels will be mixed down to those ... but if you press Cmd-J to open the movie properties you should see all 4 channels are there, or if you reimport your exported file back into FCP you'll see it contain the 4 audio tracks as exported ... if not then your export settings are not correct :/

Can I modify the Export to... iTunes settings for better audio quality and compression?

I am working on some Music Videos to DJ at a party with, I notice that when I export them as .mov files with Final Cut HD Express, they have 320 kbps and 44.100 kHz in the audio compression settings. Once I export them in Quicktime 10.2, using the File / Export to... / iTunes drop down menu, the Second, (ipad, iphone 4, & AppleTV) setting (not using HD, so the Mac and PC tab is not an option.) The final exported file, that plays great in itunes, appletv, ipad, etc. has a reduced quality audio of Bit Rate of 159 kbps (instead of 320 kbps) and Sample Rate of 32.000 kHz (instead of 44.100 kHz). Is there anyway to change these preset settings somehow?
The Formats on the File / Export / menu are even less dinamic?
I also noticed that some of the Music videos I purchased from the itunes store some years ago, have a 256 Kbps and 44.100 kHz setting. Which is better quality than the ones exported from Quicktime 10.
I thought maybe with Quicktime 7 Pro, I could fine tune all the presets, but it got too complicated for me, might this be an option? What would the settings be?
Using Widescreen 853 x 480 at full quality .mov file.
thanks.

I am working on some Music Videos to DJ at a party with, I notice that when I export them as .mov files with Final Cut HD Express, they have 320 kbps and 44.100 kHz in the audio compression settings. Once I export them in Quicktime 10.2, using the File / Export to... / iTunes drop down menu, the Second, (ipad, iphone 4, & AppleTV) setting (not using HD, so the Mac and PC tab is not an option.) The final exported file, that plays great in itunes, appletv, ipad, etc. has a reduced quality audio of Bit Rate of 159 kbps (instead of 320 kbps) and Sample Rate of 32.000 kHz (instead of 44.100 kHz). Is there anyway to change these preset settings somehow?
Your question basically has too facets. The first is the quality of the source audio in terms of sampling rate and data rate. Under normal circumstances you don't want to export the audio using a sample rate or per channel data rate that is lower than your original source if you are trying to maintain the quality as high as possible and, on the other hand, you don't want to use settings greater than the source values since they increase the final file size without improving the quality of the audio.
The second is the workflow. Since you indicate you are using FCE HD for editing, then using QT X to re-export the data seems somewhat redundant. While it has been many, many years since I last used FCE HD, if I remember correctly, you have both "Export QT Movie" and "Export using QT Conversion" options. The first option takes the audio and video format in which you are editing and merely copies the edited data in that format to a new MOV file container. On the other hand, the second option allows you export the edited data format directly to a user selected compression format using user selected options (but does assume the user knows how to best use these options). These are, BTW, the same export options available in QT 7 Pro.
I thought maybe with Quicktime 7 Pro, I could fine tune all the presets, but it got too complicated for me, might this be an option? What would the settings be?
What is so difficult here? If the source is DVD stereo quality (usually 48.0 KHz @ 192 Kbps then set your output for stereo 48.0 KHz @ 192 Kbps. If you wish to save a bit of file space, the you can use 48.0 KHz @ 160 Kbps but that is normally as low as I go. As to setting combinations in QT 7 Pro, once you set the sampling rate, the application becomes cuntextually adaptive and will only allow you to select data rates that are "standards" compliant and non-compliant ones are automatically greyed out. Rendering quality settings are self-explanatory. These are the basics if you are using a preset option like the "Movie to MPEG-4" export option. If using more complex options like the "Movie to QT Movie" option, then you will need to also consider how you plan to use your file to select the correct encoding strategy. For instance, a constant bit rate is good for optical media from the standpoint of providing a constant flow of data to the player. Unfortunately, this is not very efficient since it forces the quality to vary as it maintains the constant data rate. A variable but contarined data rate is also good for optical media or fast start online files but allows the data rate to vary between user selected data rate excursions and thus provides improved quality over the constant data rate strategy. The variable data rate allows the user to target a specific level of audio quality and will then allow the data rate to vary as needed to maintain a constant level of quality. This option is better suited for playback on a computer since the bit rate can vary greatly in magnitude. The average setting allows the user to target a specific average target data rate but allows it fluctuate as the encoder applies predictor-corrector adjustments. This option, like the constant data rate option, is good for average complexity content when creating a target file of predictable size but can somtimes have problems towards the end of the file if the content suddenly becomes more complex than predicted.
Using Widescreen 853 x 480 at full quality .mov file.
I would rarely recommend using the full quality slider setting. This is more of a redundancy setting forcing the encoder to recycle through certain encoding routines in an effort to improve quality without increasing the data rate. You would like do better to increase the video data rate limit and decrease the quality slider to something in the 50 to 80% range. You also indicate the files are 853x480. Such files are frequently the result of anamorphic widescreen MPEG-2 or DV source files. If so, I would normally recommend retaining this anamorphic strategy by encoding the H.264 video at the same 720x480 matrix dimensions and allowing the player to properly display the files at their targeted aspect ratio. This strategy will either allow for slightly better quality at the current video data rate setting or allow the user to retain the current level of quality using a slightly lower data rate which, in turn, means a slightly smaller final file size.

Export Quicktime for Protools

I exported a Quicktime (with no specific settings) for replacing dialog in ProTools. It worked great but when I reopend my Protools session the file wouldn't open. What settings do I need for exporting Quicktime in this situation?

THis is a question you pose to the guy/gal doing your audio mix. You need to ask them, "Hey, what format of QT file would you like?"
In my experience, they all want something a little different. But they ALL want visible timecode.
Shane

FCP "Export - QuickTime Movie" gamma shift

Above is an example of what happens when I do a direct export in Final Cut Pro, using the Export -> QuickTime Movie function. As you can see, the image is significantly brighter and the colors are a little more washed out (this image isn't particularly colorful, but trust me, it washes them out). I always thought the Export -> QuickTime Movie meant the image would not be compressed--that it was a straight export using the sequence settings.
The image you see above was shot natively in ProRes 422 (HQ) using an Arriflex Alexa. It has never been transcoded. The bottom image is what it looks like using Export -> QuickTime Movie. Totally unacceptable for a piece of professional software, if you ask me.
I can't express how infuriating this is, to have everything looking perfect in FCP and then exporting only to have it look like garbage. I've been able to play with gamma correction a bit and have gotten it PRETTY close to the original look, but this seems like a horrible workaround.
Anyone else know why this is happening? Is there a fix for this?
I'm working with FCP 6.0.6 and QuickTime 10.1.

Sure thing, Meg.
Here's a source clip with "approximate" gamma correction:
"Approximate" gamma correction makes the image look flatter within Final Cut Pro than it actually is.
Now, the very same clip and frame, but with gamma set to "Accurate" :
Now, things are switched. The exported image looks flatter than the source clip within FCP.
Here's another tidbit of info--the frame from my first post was professionally color graded and exported as a self-contained movie--so there were no filters, FCP or otherwise, being applied there. But the difference is just night-and-day to me.

Export Quicktime Movie only exports fades and composites (FCP6)

I'm trying to add a couple of lower thirds and a fade in and out to a live capture of a lecture; but for some reason, it's only exporting the effects - the fades and lower thirds. Everything else is skipped in the final QT movie.
I right-click the sequence and say 'Export > QuickTime Movie', leaving the settings as they are. The exported movie is 1.45GB - around the same size as the imported movie - but it's only 29 seconds long. Can anyone enlighten me as to what's going on? I tried clicking 'recompress all frames' but I have two problems with this: (1) it's going to recompress unnecessarily, and (2) it's looking like that will take about two hours.
Any help would be appreciated.

FCP6. Right there in the question title. Version 6.0.6, if that's important.
It was actually recorded off WireCast, with one camera and desktop streaming. Sequence settings are 720p square pixels, H.264 video.
Export from the File Menu has the same effect.

Settings for process color on newsprint

I have prepared an ad which will be printed in a the yellow pages of a telephone directory. Web press on uncoated stock, just a bit better than newsprint. The printer will print the pages 8 up so any color adjustments will be universal on the page. However, I figured if I start right, I might have a better chance of decent reproduction. The image is color and I presume will need 30% dot gain for that grade of paper. I need some guidance as to how to do that and what ppi I should go for. I have muddled around in the past and gotten satisfacory results, but would like to hit this one closer,
Any help is welcome.
TIA,
Joe

To get the footage into FCP I used the XDCam Log and Transfer plugin. The format for the footage is Apple XDCAM EX 1080i60 (35 Mb/s VBR), 1920 x 1080 (1888 x 1062).
The sequence settings are the following:
1920x1080 HDTV 1080i (16:9)
Pixel Aspect Ratio: Square
Field Dominance: Upper (Odd)
Editing Timebase: 29.97
Compressor: XDCam EX 1080i60 (35Mb/s VBR)
The syncing problem happened when I just did the standard Export -> Quicktime Movie using current settings.

Best Export Settings For Fast/Low-Res QuickTime Movies

I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
Hello,
I really could use some help with my export settings using FinalCut Pro 7. Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc. But now I am trying export a lengthy project at 53 minutes.
The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed. As far as what I’ve tried - I am using the H.264 codec. I tried lowering it to NTSC 720x480, then tried 1280x720 HD. I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000. My audio is set at AAC.
It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline. I'm getting a bit nervous because of how many hours it’s taking to export. The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
I could really use could some wisdom today!
Thanks so much to whomever can steer me in the right path.
`Patrick
Message was edited by: prepstein

Try here
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Audio upsampling in Quicktime Pro: Best export settings for Final Cut?

I'm using Quicktime Pro to convert audio from 32 kHz to 48 kHz, for use in FCE/FCP. Quicktime gives me several options for export settings. I want to make the conversion lossless, without increasing the size of the audio file too much.
These are the settings I'm using so far:
Format: Linear PCM
Channels: Stereo (L R)
Rate: 48 kHz
Sample Rate Converter Settings: Quality: Best
Linear PCM Settings: Sample size: 16 bits
Are these settings the best choices? Does anyone have experience doing this kind of upsampling?
Here are the other options in Quicktime:
Format: Linear PCM, A-Law 2:1, IMA 4:1, MACE 3:1, MACE 6:1, QDesign Music 2, Qualcomm PureVoice, and mu-Law 2:1
Channels: 2 Discrete Channels, Mono, Stereo (L R)
Rate: there are other choices, but I know 48 kHz is what I want
Advanced Settings:
Sample Rate Converter Settings: Faster, Fast, Normal, Better, Best
Linear PCM Settings (when Linear PCM is the format): 8 bit, 16 bit, 24 bit, 32 bit (floating point checked), 32 bit (floating point unchecked).
The file size grows quickly as you increase the Linear PCM bit settings.

You can't create something that is not in the file.
Moving from 32kHz to 48 will only make the file size
larger and can't improve the audio.
Doesn't FCP or FCE import your file at 32. Or does it
change it to 48 after import?
I am aware that increasing the audio from 32 kHz to 48 kHz will not improve the quality of the audio. And yes, Final Cut Pro and Express will both capture and allow you to work witih 32 kHz audio.
I have several hours of video shot with 32 kHz audio settings that I'd prefer to have stored on disk with 48 kHz audio, because (a) some applications like iMovie have demonstrated problems with 32 kHz audio in the past, and (b) the majority of my video is shot with 48 kHz audio, so my 32 kHz video will eventually end up in a 48 kHz project, leaving the upsampling to Final Cut. Yes, I do eventually plan to burn my projects to DVD as well, but this isn't an immediate concern.
The problem with doing the conversion in Final Cut is this: Some of the people knowledgeable about Final Cut Pro and Express recommend doing the upsampling using Quicktime or another application, instead of using Final Cut, because Final Cut may not do as good a job as Quicktime. So my intention is to upsample the audio now in preparation for later projects. I don't completely understand why Final Cut wouldn't do as good of a job at upsampling, but a couple of experienced users in the FCP and FCE forums have independently corroborrated this.
Thanks to everyone for their helpful posts and responsiveness.
PowerMac G5 Quad 2.5 GHz 3GB RAM Mac OS X (10.4.5) NVIDIA GeForce 7800GT
Message was edited by: Anthony M Kassir MD

Suggested Quicktime settings for HD export

Hi
Hoping some one can help? I Would like to retain best possible quality from my High Dev camcorder. I gather the best route is to use export> Quicktime but what I would like to know are the best "settings" to use. I live in the UK so does PAL have a part in it?
I intend to copy the completed project to my portable HD drive then copy that to the HD drive on My xbox 360 to hopefully watch a higher quality home movie than If i was to burn to DVD.
Thanks
Kier

Sorry for the duplicate reponses. Not sure what happened there.
I really don't get how pal only does certain settings considering my HV20 is a pal camera and supports 1080i. Why would the compression be different. I am being so thick about this sorry.
By the way I have just compared 2 projects. 1 using the share to media option and the other with the 720p from quicktime.
There really isn't that much difference. I am viewing on a 720 pal tv. I did a shorter clip for a friends using the quicktime export and there was a big difference. My project was 20 mins where as the that one was 3 minutes so the compression was obviously less.

Custom Quicktime pro export settings for iPhone

I want to custom export from Quicktime Pro, using h.264 in an mpeg4 container with a low data rate (about 400kb) and smaller size (400x220)
It imports into iTunes fine, but won't sync to my iPhone (error message: 'xxx' was not copied to the iPhone 'xxx' because it cannot be played on this iPhone.)
I've tried the Quicktime Pro preset called 'movie to iPhone', and it works fine: the movie copies to my iPhone. The filesize though, is far bigger than I know I can get it down to with custom settings.
I just can't get it to load onto my iPhone.
What am I missing?

You've got Tiger and Automator! Learn how to use them help you make some "presets".
http://www.apple.com/downloads/macosx/automator/
You could also "hack" the .plist files found in the QuickTime Player.app and edit away.
Control-click on the QuickTime Player and choose "Show Package Contents". Inside the resources folder are a number of .plist files for presets. If you have the Developer Tools installed a double click on a .plist should open the Property List Editor. Change the settings to your liking, but beware.
I use Automator as either a "workflow" on a stand alone "application". Workflows can be triggered by a control click on a file where the "apps" act like AppleScript "Droplets". Drag a file to the droplet and let the application do its thing.
QuickTime Pro stores the "Most Recently Used" settings for many exports. These would be easy to re-construct or edit to allow you to create dozens of different "presets". Save each as an application (naming them may be troublesome) using Automator.

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Best Export Settings for PC Playback H264 or Quicktime w/H264

I searched the forum and found a tip about Exporting Quicktime with H264, and have had really good success.
However, trying the H264 directly, which results in an MP4 file, I have poor results. Even with the same Width and Height and bitrates for QT MOV files, they either playback jerky (same bitrate in QT plays fine), or when I scale down the width/height the video flashes green frames and at the end of the clip even reverses and goes forward Using the QT Pro player for Windows).
Also, cannot find an explanation of the "Profile" and "Level" in the Video settings screen.
PS - Yes, this is all new to me, and Yes I am putting the bitrate down to accommodate my older PC. Video source is the MOV 1080p files from the Canon 5d Mark II.
Thanks!
Nelson Salez
PS I spent all my money on the new camera and I cannot afford a MAC, although it is a long term goal.

I searched the forum and found a tip about Exporting Quicktime with H264, and have had really good success.
However, trying the H264 directly, which results in an MP4 file, I have poor results. Even with the same Width and Height and bitrates for QT MOV files, they either playback jerky (same bitrate in QT plays fine), or when I scale down the width/height the video flashes green frames and at the end of the clip even reverses and goes forward Using the QT Pro player for Windows).
Also, cannot find an explanation of the "Profile" and "Level" in the Video settings screen.
PS - Yes, this is all new to me, and Yes I am putting the bitrate down to accommodate my older PC. Video source is the MOV 1080p files from the Canon 5d Mark II.
Thanks!
Nelson Salez
PS I spent all my money on the new camera and I cannot afford a MAC, although it is a long term goal.

Fastest quicktime export settings for pro tools?

I need to export a heavy movie (42 minutes, 6 video layers, a lot of color correction effects) for the mix. I need to do a quicktime, and it doesnt need to be really high image quality.
I tried exporting a .mov with dv settings but Premiere encountered a problem and shut down. Now I need to export this really quickly, ideally under 2 hours. Which are the best settings? Everything I try has more than 8 hours time remaining.
Many thanks in advance for your help.
Anna

Turn the effects off, that may help. (I assume this is just for timing issues, and doesn't nee to be the final 'look'.)

Settings for exporting to quicktime

May i know whats the best settings to export to quicktime, using manual advance settings?
I realized there is a delay whenever i hit the "next button"
also, whats the best settings for me to export to quicktime?

Are you making your DVD with iDVD? If so you can just share to iDVD from the Share menu. Otherwise, here are the settings that I use. I'm not going to say they are the best settings, but I have had good luck with them.

Export-Quicktime-DVPAL 48kHz anamorphic settings for 16:9???

Similar Messages

Maybe you are looking for