Export QuickTime Settings

Does any one try to Export QuickTime Settings with applescript?
For example:
tell application "QuickTime Player"
tell first movie
save export settings for QuickTime movie to file filePath replacing yes
end tell
end tell
It is working perfect with original QT Settings.
I tried to install Flip4Mac free version and export QT settings for ".mov" to ".wmv", but the file it created does not played in Windows Media Player.
I notice that Flip4Mac free version only can export 30 seconds movie, does any body could successfully complete this job with FULL VERSION?

I tried to install Flip4Mac free version and export
QT settings for ".mov" to ".wmv", but the file it
created does not played in Windows Media Player.
I don't understand what you mean. You mean, switching containers from MOV to WMV? WMP has certain codec requirements, I suppose, just as Quick Time does.

Similar Messages

Export Quicktime Custom Preset

Sorry you can thrash me if you like, but Ive searched, rtfm and still confused. I have to export quicktimes all the time, not that it's important but our smokes across the hall only take quicktime at the moment. So I go export quicktime and scroll down the mile long list of codecs and pick custom and then pick animation. How can I get my custom preset which is just Animation codec to show up on that long list so I don't have to go to custom clear at the bottom and then pick animation. I thought I saved it as a custom but it doesn't show up. Basically, I want Export-export quicktime-settings-animation. Not Export-export quicktime-settings-scroll-custom setting-animation. And last thing, why when I do a batch export can I not choose the animation codec in the list
thanks
JR

JR
I think you better build a custom preset in Compressor and use it. You can export batchs of files/sequences that way too.
Hope that helps !
Alberto

Suggested Quicktime settings for HD export

Hi
Hoping some one can help? I Would like to retain best possible quality from my High Dev camcorder. I gather the best route is to use export> Quicktime but what I would like to know are the best "settings" to use. I live in the UK so does PAL have a part in it?
I intend to copy the completed project to my portable HD drive then copy that to the HD drive on My xbox 360 to hopefully watch a higher quality home movie than If i was to burn to DVD.
Thanks
Kier

Sorry for the duplicate reponses. Not sure what happened there.
I really don't get how pal only does certain settings considering my HV20 is a pal camera and supports 1080i. Why would the compression be different. I am being so thick about this sorry.
By the way I have just compared 2 projects. 1 using the share to media option and the other with the 720p from quicktime.
There really isn't that much difference. I am viewing on a 720 pal tv. I did a shorter clip for a friends using the quicktime export and there was a big difference. My project was 20 mins where as the that one was 3 minutes so the compression was obviously less.

Imovie 09 export to quicktime settings.

Hi,
I would like to export video clips that I shot using the iPhone 4 (720p) from imovie 09' however, I am having some difficulties with 'export using quicktime' settings
What is the best settings for export in this case?
Also what is the difference between these two; '1080 x 720p HD vs HD 1080 x 720p 16:9' from the export size settings?
Many thanks for your cooperation and efforts committed in dealing with this.

Welcome BarrenRegions to the  iMovie boards ..
no way to answer that question.. you have to compare apples with peaches.. (German proverb):
iMHD≥6 was a dv-only editor (and AIC, but this is another story...); it handles dv lossless.. frequent contributor lennart once made a test of ex- and reimporting a few dozends time the same clip = no loss of pic quality.
now iM08/09:
it handles dv not as dv internally anymore; therefore it accepts lots of other codecs (mp2, avchd, h264...).. so, depending of your source, the export can be lossy.
we have mile-long threads about that, search for posts from Steve Mullen and Euisung Lee who did research this issue +ad nauseam+
as far as I followed that discussion: there's a 'trick', to convert - after import into iM08/09 - the imports to AppleIntermediate with tools as QTpro or Mpeg Streamclip. that blows-up size, but forces iM08/09 to keep quality a 100%...
.. sorry for being less helpful, even as a 'Silverback' on this board, all that is +a bit+ beyond my skills, needs and understanding.. to be honest: I switched awhile ago to FinalCutExpress, and will use iM09 when I'll get a new rec-device.. hopefully this year (Santa! do you listen?!...)

Export-Quicktime-DVPAL 48kHz anamorphic settings for 16:9???

I have project I filmed on a Sony PD170 in 16:9, brought it into FCPHD and changes sequence to 16:9 looks fine for what I want.
Now when I export it out for DVDSpro I use the "Export-Quicktime-DVPAL 48kHz anamorphic" setting when I look at the file in QT 7 it is stretched vertically????
First of all why? Then when I go to DVDSpro when I create new project should I have it on "force to letterbox or Pan Scan"? The Simulator is set for 16:9 but when I simulate the DVD the film in back to 4:3 any guidelines would help
Many thanks

Hi Allister,
Yes it is stretched vertically and correct. DV PAL is always (no matter if 4:3 or 16:9) 720x576 pixels. The displaying device or software has to stretch the image horizontally to compensate for that during projection.
In DVDSP you should set the display mode to "16:9 Letterbox". The Simulator will always start-up with the setting specified under Preferences-Simulator. If it says 4:3 there, you have to manually set it to 16:9 before playing.
HTH,
Uwe

Unable to export Quicktime after upgrade from Premiere 7.0 to 8.0 (2014) error "incompatible video codec in preset"

In the previous version of Premiere Pro (downloaded two months ago) I was able to export QuickTime files with preset HD 720p H.264. It was very easy to do this in the previous version.
Upgraded to Premiere Pro 8.0 (2014), no when I attempt to export the same project with the same settings I see error message "incompatible video codec found in the preset. present load failed"
When I select Quicktime, the default preset appears as NTSC DV Widescreen 24p. Attempted to export with this setting, result is a file that plays audio but no video.
System is Windows, tried two different computers, including one with Windows 8, same result. Tried Media Encoder, same result.
I searched the forums for an answer, the new features page lists these presets as available however they are not working for me. Nothing else was changed on the computer, only the upgrade to Premiere 8.0 (2014)
How can I export Quicktime files in the new Premiere Pro?

Tech support helped me solve the issue - uninstall QuickTime and reinstall the newer version of QuickTime

Export - QuickTime results in green frames, mis-aligned audio

I have the latest Final Cut Studio with Final Cut 7. I used to use Final Cut Express 4 and recently upgraded. With FCE 4, if I went File-> Export-> QuickTime (not QuickTime conversion) it would rapidly export my project in full quality (albeit a huge file size). It didn't matter how many effects I had or layers of video, the quality was always the best. However, with FCP 7, when I do the same thing, even the simplest transition or effect will throw off the audio and result in green frames instead of my effect/transition. The project settings are the same ones I used in FCE 4, and the project is always fully rendered and prepared. _*+Can anyone tell me why this is happening and how I can fix it?+*_
I need to be able to use this option because I do videography for the Drama Festival in Massachusetts and I need to be able to edit up to the last minute. This form of export is so speedy and lossless that the file size isn't important.
I use a unibody MacBook Pro (Mid 2009) with 4GB RAM and 500GB HDD, and I always switch to the Nvidia 9600GT for editing.

General
Frame Size: 1280 x 720 HDTV 720p (16:9)
Pixel Aspect Ratio: Square
Field Dominance: None
Editing Timebase: 29.97
*QuickTime Video Settings*
Compressor: H.264
Quality 100%
*Clip Properties*
Vid Rate: 29.97 fps
Frame Size: 1280 x 720
Compressor: h.264
Data Rate: 1.1 MB/sec
Pixel Aspect: Square

Export Quicktime = stalling / frame rate / dropped frames

Firstly this issue isn't news. It appears it has existed since 2002 at least on these forums and Apple has done nothing.
Exporting to Quicktime:
1) Keynote makes up what seem to be consistent random frame rates on export
- Codec doesn't matter. Photo JPG, Intermediate, 8bit 422, H264
- You can set the frame rate in export / custom / settings it doesn't matter
- Having no video on a slide or having video on a slide doesn't change the problem...
- The last two items do have more information to complete their story
- If you do have a video on slide at say 25fps and export (at same rate) the random will stabilise
but it will stabilise to something bizarre, such as 23.69.
- So Keynote can wreck your frame rate it will drop frames, or even add frames while dropping
others. It is deeply sophisticated in how it destroys stuff on export.
Result
- is a stuttering output if embed video on a slide with a wrecked frame rate
- and a random frame rate if you don't have a video embed
2) The video stalls between slides
- Keynote seems to play a trick by making a single frame span multiple frames
- At the start of the first slide this seems to vary. The first frame can be between 7 and 33
frames depending on some strange internal logic only known to Keynote
- Between slides it will hold the last frame of the exiting slide usually for 7 frames and hold
the first frame of the entering slide for usually the same amount.
- No amount of change to settings such as transition delay, adding a transition, self play etc
will effect this stalling from what I can tell.
- You can analyse the reality of the issue by dropping the resulting file into Quicktime 7 and
changing the video window "time code" display to frames by clicking on it and single framing
through the video. I have Quicktime Pro for the record.
Notes:
- I have every update installed and am running 10.6.2
- I have tried it on two machines, one a clean build, server or client
- Playing the presentation direct in Keynote does not present any of the noted issues
- I have spent the better part of two weeks on the issue trying all sorts of combinations
- Video of different frames rates, sizes, codecs. All useless, don't bother.
Outcome:
- Keynote is completely useless unless you just want to play a presentation in it
- Dropped frames, stuttering video, stalling, mangled frame rates, fake frames
Solutions that aren't:
- One suggestion for video embeds is to enter a strange custom frame rate. For example a
24fps original turns into a 23.69 export, if you up the frame rate to 24.3 the resulting export
is 24fps.
This is a truly hit and miss affair and will require a lot of testing to nail it. Unfortunately I
tested the resulting video frame count in Quicktime against the original video and...
The amount of frames is not the same. Part of my assumption is that the stalled pad frames
are being considered by Keynote and it drops some frames to fake the same length, that at
least -seems- to be part of the result, but it doesn't account for all the lost frames.
- I have also tried just having one slide and exporting that. The same things happen regardless
How Al Gore managed to make "inconvenient truth" using Keynote is a complete mystery. Maybe on Tiger with some old version it used to work, yet from the forums it would appear it has never worked. This piece of software is a clear case of "it just doesn't work"
I hope you find this and stop hurting yourself trying to make this. I might hurt on a bit longer yet.

I can't answer in detail (I started with version 6, which I haven't used in years, so don't know what v5 did) but... a general comment
Software that old is very likely going to struggle trying to edit a VOB/MPG file copies from a DVD
If you are digitizing by playing the DVD through a conversion device you should end up with DV AVI which should edit well
Just what kind of files are you trying to edit?

FCP "Export - QuickTime Movie" gamma shift

Above is an example of what happens when I do a direct export in Final Cut Pro, using the Export -> QuickTime Movie function. As you can see, the image is significantly brighter and the colors are a little more washed out (this image isn't particularly colorful, but trust me, it washes them out). I always thought the Export -> QuickTime Movie meant the image would not be compressed--that it was a straight export using the sequence settings.
The image you see above was shot natively in ProRes 422 (HQ) using an Arriflex Alexa. It has never been transcoded. The bottom image is what it looks like using Export -> QuickTime Movie. Totally unacceptable for a piece of professional software, if you ask me.
I can't express how infuriating this is, to have everything looking perfect in FCP and then exporting only to have it look like garbage. I've been able to play with gamma correction a bit and have gotten it PRETTY close to the original look, but this seems like a horrible workaround.
Anyone else know why this is happening? Is there a fix for this?
I'm working with FCP 6.0.6 and QuickTime 10.1.

Sure thing, Meg.
Here's a source clip with "approximate" gamma correction:
"Approximate" gamma correction makes the image look flatter within Final Cut Pro than it actually is.
Now, the very same clip and frame, but with gamma set to "Accurate" :
Now, things are switched. The exported image looks flatter than the source clip within FCP.
Here's another tidbit of info--the frame from my first post was professionally color graded and exported as a self-contained movie--so there were no filters, FCP or otherwise, being applied there. But the difference is just night-and-day to me.

Export Quicktime movie in FCP comes out as a Final Cut Pro Movie File

Does anyone know why when I Export Quicktime movie in FCP it comes out as a Final Cut Pro Movie File? I can still play it in Quicktime and it's possible to set the Quicktime Player as the default software, but it still says in my finder window that it is a Final Cut Pro Movie File.
Does anyone know if there are any settings for the clip to come out as a Quicktime Movie instead? Thank you!

+Jim Cookman :+
+"The studio apps "brand" their exports. Actually kind of useful...+
In the words of the venerable Forest Gump, "Useful is as useful does" ... or something like that.
I actually use similar "icon" techniques in other areas of my workflow. But most of the time I just modify the file title for quick ID - I also use dashes & underscores to get things to stand out and stay at the top of lists etc.
But QT is my Go-To App for quick media reference and I have it set up to play almost all types off media when double clicked. I started doing it years ago when iTunes opened up every time I wanted to check a few seconds of an mp3 file.
I guess the best solution would have been for Apple to leave the "export FinalCut movie" option intact and simply add in an "export Quicktime movie" option as well. Or maybe add another drop down option for the tagging (branding).
At least we would have been able to make the workflow choices in-the-box rather than doing it with the OS.
Andy Neil,
I think using the OS is the better option rather than re-compressing your movie just so you can double click into QT.
best
g
Message was edited by: Goldfish

Best Quicktime settings for Video Encoder?

This is to reiterate the issue originally posted under
this
topic.
Summary: CS3 encoded FLV (using Quicktime movie as source)
stops playing halfway through (likely related to the audio)...
Solution: Set audio of Quicktime movie to 44.100 kHz (not
22.050) sample rate before encoding to FLV.
Continued Issue: Is Adobe working on a fix to the Flash
Video Encoder so that all Quicktime settings are supported?
Question: Any recommendations for the "best" Quicktime
video/audio settings (codecs, frame rate, etc.) for FLV encoding to
optimize quality and minimize file size?

Voddie,
I'm definitely no expert; so if others have better info, I
hope they will post too. And the guidance below is from a Mac
perspective.
Using
Quicktime Pro, you can export each movie and adjust the
Options. Under the Quicktime Options (see this
screen
image
for the two settings windows that you will access), the Sound
Options is where you'll set the sample rate to 44.100 kHz, then
save the file(s).
If Quicktime Pro is not available, you might look into
ffmpegX
as an option (though I have not tried this myself).
Note: I read that for version MX, it was recommended that the
Quicktime sound be uncompressed, or encoded using ALaw 2:1 or ADPCM
codecs. I'm not sure if this is true for CS3. Again, I hope others
will chime in.
Patrick

Export QuickTime movie with Compressor running in background

I've rummaged through the forums many times to figure out the absolute fastest way to get an FCP sequence compressed for DVD Studio Pro while maintaining the best quality. I always seem to come up with:
Export QuickTime Movie (not self contained) --> Compressor (DVD best quality settings)
This seems to work fine. I am currently exporting sequences in HDV 1080i60 and they take an extremely long time to export into QT movies. Because of that, I am editing a sequence, waiting for it to export, then dropping it into Compressor. At this point, FCP is available for editing again while Compressor is working, so I repeat the process. However, when I export to QT from FCP while Compressor is still running in the background it seems to take much longer to export.
Here is my question:
*Am I doing anything wrong by allowing Compressor to work while I am trying to export QT movies from FCP to the same drive?*
Is FCP actually taking longer to export, or is that my imagination? Would it be faster if I only did one at a time, or should it take the same amount of time either way? Am I putting the data on my final movies at risk by doing these things at the same time?
Any help would be appreciated as this is a time sensitive project. I am working in both FCP 5 and 6 on two different computers. 2.5 GHz Core 2 Duo, 4 GB.

Compressor takes a lot of system resources. It will slow the computer down in other tasks.
Because Compressor can run unattended, why not take advantage of that?
Do your regular work that needs you to be there and run the Compressor Batch overnight or at other times when the system is idle.
Compressor's default destination for its processed files is the same directory as the original -writing the files to a different drive might help, at least that way your media drive is not reading and writing at the same time.

Export Quicktime Movie only exports fades and composites (FCP6)

I'm trying to add a couple of lower thirds and a fade in and out to a live capture of a lecture; but for some reason, it's only exporting the effects - the fades and lower thirds. Everything else is skipped in the final QT movie.
I right-click the sequence and say 'Export > QuickTime Movie', leaving the settings as they are. The exported movie is 1.45GB - around the same size as the imported movie - but it's only 29 seconds long. Can anyone enlighten me as to what's going on? I tried clicking 'recompress all frames' but I have two problems with this: (1) it's going to recompress unnecessarily, and (2) it's looking like that will take about two hours.
Any help would be appreciated.

FCP6. Right there in the question title. Version 6.0.6, if that's important.
It was actually recorded off WireCast, with one camera and desktop streaming. Sequence settings are 720p square pixels, H.264 video.
Export from the File Menu has the same effect.

Exporting Quicktimes from Premiere Pro

When exporting video from Premiere pro, uncompressed or HD 1080i Quicktime settings crash my machine every time , any idea why? I'm trying to find the best export to give to a colleague working remotely on a mac using aftereffects

<moved from Adobe Creative Cloud to Premiere Pro>

Audio and Video option missing from Export Quicktime Movie Include

Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
Sequence settings is 720x480 NTSC DV (3:2)
NTSC - CCIR 601 / DV (720x480)
Lower (Even)
29.97
QT Video Settings
DV/DVCPRO - NTSC
100%
Audio
48 kHz
16-bit
Channel Grouped
Did I miss something?
Thanks

Thanks, forgot about that.
For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
Jim

Export QuickTime Settings

Similar Messages

Maybe you are looking for