Exporting DPX sequence: frame rate incorrect in exported file

Hello all, I'm new here.  I'd really appreciate some help with this issue.  My sequence and source files I am working with are 2048x1240, (1.0), 23.976 fps .  I am exporting a DPX file sequence with matching settings. 
The problem is, when I import that new DPX file sequence back into my Premiere project, or an AE project with the same settings, the new DPX file has a frame rate of 29.97 fps. 
I've tried numerous times and checked all my settings.  I can't figure out why the new DPX sequence is not 23.976 fps.  Any ideas what I am doing wrong here?
here are my export settings, note output and source have matching frame rates:
and here is a screen grab showing the file properties of my new exported DPX sequence, after importing back into Premiere Pro CS5, with a frame rate of 29.97 fps. 
Any help will be greatly appreciated!
thanks,
Jeremy

Hi there.
I am having the same exact problem, in CS6.
BUT, I have exported this project countless times, and only after my last edit has it started to export at 29. My entire movie is in 23.97. I have tried interpreting the one clip that is 29, but this does not help. It will not allow me to interpret the whole project at once.
Are there any other solutions?

Similar Messages

  • Frames rates encode to audio files

    Hello,
    I am not a Soundtrack pro user nor a Final cut pro user, (I use REAPER, and other audio programs); however, I got two people who called me asking (because I am apparently there only audio person they know) "how to change the frame rate on audio already recorded?" One person used the zoom H4N, and the other used a MAudio (?) recorder.. I looked them up and there is no encode to match the frame rate of the film to the sound. It seems that both recorders have no function to do frame rate encoding. (film speed was 24 frames not 30 frames.)
    Is there a function to change the audio encode to match the frame rate of the film with in these programs?
    What I know is sound is sound; 10 min of footage equals 10 min of audio. It is the encode that tells the film edit tool this is to match 24 frame or 30 frame.
    I have looked into the manuals (table of contents) of Final cut pro and Soundtrack pro and not found the key words "Frame rate change to audio files" or "encode to audio files for frame rate"... I also looked online with the words "Frame rate change for Audio files" and "Audio encode frame rate change."
    Can anyone help me to pass this information back to these people?
    Thank you!

    Tell them to change the sample rate to 48khz/16bit. Straight audio does not have a frame rate.
    x

  • Help with TIFF image sequence frame rate?

    I'm working on an animation sequence, its a 24p project.  Whenever I import an image sequence, Premiere automatically interprets this at 29.97 (though, per the help files, it should automatically interpret at the project frame rate, but it's not).  In the project panel, I use interpret footage so that it interprets at 24p.  However, when I bring this image sequence into the timeline it shows at the right duration, but the end of the sequence is cut off (essentially, premiere is still reading in at 30p, but gives it the duration of 24p).
    CS4 is the first version I've had this problem with.. usually, I just bring in the image sequence and it's fine.
    Any suggestions?
    Thanks.

    Hi, I have the same problem as my workflow is to import R3D into AE CC and render it into Tiff sequence. At first I had changed every setting to 24, and it rendered out choppy and clipped off a few frames in the end.
    Now I have tried this
    Once you import Tiff, right click> Interpret Footage > Main
    Then you will see black box. In this column box, there is Frame Rate column, then tick Assume this frame rate: 24 frames per second.
    You have to type in 24 yourself, then it works out fine.
    My guess is that Tiff is sequence image, and it DOES NOT have frame rate. So you have to tell AE to assume the imported image sequence's frame rate. Otherwise it always assumes 30 by default.
    Hope it works.
    DDH111

  • Change frame rate on an AC3 files?

    I've been given two NTSC (23.98 fps) .ac3 files (5.1 Dolby Digital EX and 6.1 DTS-ES) that I need to use in a PAL 25fps project. Any suggestions as to how to change the frame rate to match my PAL encodes?

    Marc Morris wrote:
    I've been given two NTSC (23.98 fps) .ac3 files (5.1 Dolby Digital EX and 6.1 DTS-ES) that I need to use in a PAL 25fps project. Any suggestions as to how to change the frame rate to match my PAL encodes?
    You shouldn't have to change the 'frame rate' of your .ac3 sound files. Both PAL & NTSC video use the same sound formats. The only problem you might run into is if you changed the duration of the video when you did the video conversion. Hint - keep the durations the same.
    Have you have changed the duration of your video versions? If so then start by decoding your .ac3s and then running them through a 'time-strectching' program before re-encoding them to .ac3. Not very elegant I'm afraid.

  • Change sequence frame rate when there are clips in it.

    Hi,
    I finished a three minute video (1444x1080, 29.97fps), then I had to do a slightly different version (first was for corporate clients, 2nd for regular clients). I opened a new sequence, then selected all of the clips in the first timeline, copied, then pasted them into the second timeline. As I started to make the changes I noticed that some of the clips had moved around and the lengths were slightly different. Since I had to make changes anyways, I didn't worry about it too much. Then, just as I finished, I realized the problem. The new sequence was 23.98fps. Ah! 
    I've already learned that you can't change the timebase of a sequence that has clips in it. I tried creating a third sequence (making sure the settings were correct) and then copying and pasting the clips from sequence 2. However, they go completely wonky in the new timeline. The various tracks don't line up and the in and out points of the clips have changed.
    Is there a way to get my 24fps sequence into a 30fps sequence without having to fix or redo most of it.
    Thanks.

    Ha. Thanks. That's good to know. I won't waste my time trying.

  • Export XML in right frame rate  for resolve?

    Hi!
    I'm in serious need for some help! When I import my exported XML sequence from premiere in to DaVinci Resolve 10 lite, I get an error message saying "The imported sequence frame rate (25) must be the same as the project frame rate (23,976)." All of my settings in Premiere that I can think of is set to 23,976fps, but if I understand the error message right, DaVinci claims the XML is 25fps... doesn't make any sense at all. I've tried for several hours now getting this to work, but it won't.
    I would really appreciate some help with this one, I'm in a hurry (as always, we're behind schedule). Worked with Davinci many times before, never had any problem with it.
    Regards
    /Patrik

    I am not a Resolve user, but could it be that Resolve has been set up for a 25fps project? And maybe the lite version restricts your frame size?
    Just curious.

  • Why is my exported file 2 seconds longer than the project in my timeline

    I am using a Mac, latest OSX. I need my project to run at exactly 30minutes. In the timeline my project is marked at exactly 30 minutes from the in/out points. When I export the media with Premier Pro I end up with a final product which is 30 minutes and 2 seconds long. Where are these two extra seconds coming from? I had my source range set for Sequence in/out points and this read as 30 miutes exactly, and the predicted output time for the final export read as 30 minutes exactly as well. This still added two extra seconds so I then set the source range to custom and typed in 30minutes exactly and it is STILL giving me 2 extra seconds. What is going on here?
    Export settings summary reads as follows
    1920x1080 (1.0)
    23.976 fps
    Progressive
    00:30:00:00
    VBR
    1 pass
    Target 0.19 Mbps
    Max 0.19 Mbps
    AAC
    320 kbps
    48 kHz
    Stereo

    Because within Premiere Pro, your are reading the total running time based on Non-drop frame timecode.
    Depending on which version of Quicktime you are using you can click on the counter and change the value of the numbers displayed:
    where Standard is real time. If you switch it Non Drop, you'll see it will display the length (incorrectly) as 30 minutes.
    If you are using Quicktime 10 I believe you can only display real time.
    This is all because your video is running at 23.976 frames per second. That means it is running slightly slower than real time, which would be true 24fps. Over the period of 30 minutes, this slow frame playback is making the show run longer by two seconds.
    This why in NTSC 29.97 and 59.94 video there is drop and non-drop timecode. Drop frame timecode drops timecode numbers over time to compensate for the difference that the video rate is slightly slower than real time.
    In drop frame, when you have a duration of 30 minutes, it coresponds to real time 30 minutes.
    In non-drop timecode, when you have a duration indicating  30 minutes  it will actually take slightly longer to playout.
    There is not a standard for 24fps drop frame timecode, it is always non-drop. You can't switch to drop frame timecode if your sequence frame rate is 23.976 or 24fps.
    The math:
    If you had 30 minutes of footage running at 24 fps - 24fps X 60 = 1440 frames in a minute, 1440 x 30 = 43200 frames in the show. (So non-drop TC, which counts the frames without regard to the true playback rate, displays a duration of 30 minutes)
    But since the video, is, in fact, running slightly slower, at 23.976, those 43200 frames take longer to play out by .024 frame per second of real time.  So 43200  (your total show amount of frames) divided by 23.976 (the playout per second frame rate) = 1801.801802 seconds, which is 30 minutes, 1.8 seconds.
    Avid used to ( and maybe still does) come with a calculator to make this conversion and to help make the frame count = the desired running time.
    It should be noted that within commercial production, with durations of 30 or 60 seconds, this whole mess is less apparent. It only shows up when you work with program length material. This is why they invented drop frame timecode.
    A solution is to tighten up the edit by 1.8 seconds over 30 minutes
    MtD

  • Video doesn't slow when added to timeline of different frame rate

    I'm having trouble understanding what's going on here.  I have a video shot at 59.94 fps, and I add it to a sequence that is set at 29.97 fps.  It plays back normally which makes sense if premiere is dropping frames by 1/2, but the drop frame indicator says that it isn't dropping frames.  The clip also runs the same length.  The interpret frame rate for the clip in the project window says 59.94 fps, so if it's added to a sequence that is set at 29.97 fps and it's NOT dropping frames, shouldn't it be slowed down?

    OK cool thank you very much.  So I've been doing some research to figure out the best way to edit this project.  The problem is that I have some GoPro videos shot at 1080X1920 and 59.94 fps and some at 480X840 and 240 fps.  But the catch is I want to make the final product work well for Youtube.  This is how I feel I should go about getting the best quality for my final video.
    1.  Set the sequence settings to 720X1280 (which is what I will export as so that the 480X840 doesn't loose as much quality compared to having to resize up to 1080X1920 to match the other clips).  I don't think there's much quality loss in down-scaling the 1080X1920 to 720X1280 (if any, or is there?), so it's kind of a happy medium for both frame sizes that I have and it's still good for Youtube.
    2.  Apparently Youtube really works well with 29.97 fps, so this is what I will set the sequence frame rate at.
           **Another side question I have is what if my sequence frame rate is set at 29.97fps and I interpret the frame rate of a 59.94fps clip as 29.97fps and add it to the sequence.  Now if I use the rate stretch tool to speed up the now slowed down clip to 200% so that it plays at normal speed.  Will Premiere remove frames to speed up the clip or does it really increase the rate of the frames so that I don't loose any frames?**  My guess is if I export at 29.97fps it will remove half of the frames.
    Is it not possible to have an exported movie clip that contains multiple frame rates?

  • Error with Timecode when frame rate is 24 fps

    Working on Premiere Pro CS5.5 on Mac. The frame rate/timebase of the sequence is 24 fps. When I burn in timecode on my video, timecode display becomes incorrect if I start timecode at the hour.
    1) If I enter 01:00:00:00 for Starting Timecode in Effects Control, "timecode overlay"  becomes 01.00.03.14
    2) If I enter 02:00:00:00 for Starting Timecode in Effects Control, "timecode overlay" effect becomes 02.00.07.05
    3) If I enter 03:00:00:00 for Starting Timecode in Effects Control, "timecode overlay" effect becomes 03.00.10.19 and so on.
    It works fine if
    a) starting timecode is 00:00;00:00 and if sequence time length is under an hour
    b) or if the sequence frame rate/timebase is 23.976
    This is weird. What could be causing it.
    I am on a tight deadline and desperately need help resolving this.
    Thanks.
    renized

    Working on Premiere Pro CS5.5 on Mac. The frame rate/timebase of the sequence is 24 fps. When I burn in timecode on my video, timecode display becomes incorrect if I start timecode at the hour.
    1) If I enter 01:00:00:00 for Starting Timecode in Effects Control, "timecode overlay"  becomes 01.00.03.14
    2) If I enter 02:00:00:00 for Starting Timecode in Effects Control, "timecode overlay" effect becomes 02.00.07.05
    3) If I enter 03:00:00:00 for Starting Timecode in Effects Control, "timecode overlay" effect becomes 03.00.10.19 and so on.
    It works fine if
    a) starting timecode is 00:00;00:00 and if sequence time length is under an hour
    b) or if the sequence frame rate/timebase is 23.976
    This is weird. What could be causing it.
    I am on a tight deadline and desperately need help resolving this.
    Thanks.
    renized

  • Frame Rate help

    I have a project that requires me to intercut video footage of a presentation with a Keynote deck. The video of the presentation was shot with a single camera (not by me) at 1920x1080 at 23.98 FPS. You can't see the Keynote slides on the projection screen behind the speaker, hence the need to intercut slides into the video.
    I want to use FCP's multiclip to edit the Keynote slides (exported as a mov) and presentation video together.
    I have the original Keynote file, but I can't seem to make the Keynote app export at 23.98 FPS. If I export it at 24 FPS, and try to make a multiclip, FCP throws an error about frame rates not matching (because the video footage is 23.98 FPS).
    So, if I can't get Keynote to play nice, do I need to convert the presentation footage from 23.98 FPS to 24 FPS? If so, what's the best way to do it?
    Thanks!

    although cinema tools may seem daunting, using the conform option is very simple.  First, I would duplicate your file (for safety sake as cinematools actually changes the frame rate of the original file).  Then open your file in cinematools.   File:  open clip.  A window opens and at the bottom about two-thirds to the right is a button "conform."  Click that and a window opens called Conform Clip.  Simply choose the desired frame rate and click the conform button.    That's it.    CinemaTools is (if I understand correctly) simply changing the metadata for the file so instead of playing back at your original frame rate, it plays back at the new frame rate.  If you conform from 24fps to 23.98 you will actually be slowing down your clip slightly.  But each frame is still a discrete frame and no interpolation, creation or deleting of frames happens.

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • Change frame rate in quicktime

    is it possible to change the frame rate of a .mov file?? It set itself to 23,71 fps.
    Thank you
    Im editing on a PC

    1080i59.94 is still 30fps, running at 29.97.  The "i" means INTERLACED, and then the number following that refers to FIELDS per second, not frames.  2 fields per frame, so 60 FIELDS per second...30 FRAMES per second.
    And don't worry, if your footage is progressive, and you output a 1080i.59.94 file...both fields in the frame will be the same...It'll still be progressive.

  • Can you adjust the frame rate with quicktime?

    I need to slow the frame rate on an .avi file, and I can find how to do that in big chunks, but how to fine tune. Is this possible on the latest release (just downloaded it) and if not can someone tell me what I can use to change the framer ate on the .avi itself (either way is fine)
    I am SO not tech savvy so please assume you are replying to an idiot but thank you very much in advance for any help.

    p.s. I discovered that holding the option button and the fast forward give me this control for speeding things up, but I can't figure out how to slow it down - sorry for the missing info

  • Frame Rate - Need to change it

    Question...
    How do I change the frame rate of capture from 15 to say 1.0?
    If I ever try through a controller or just p.setRate(), I get a run-time complaint that I can't change the rate on an unrealized player/processor. So, I do it after I realize and it runs well, but ti doesn't change the frame rate. Any help is appreciated!

    i changed the frame rate for a video file.. not for webcam live video..
    i designed a player with its tools..
    one of these tools increase or decrease the frame rate..
    remember its from video file...
    good luck

  • What frame rate should you build your Flash file at?

    Every second of video has 30 frames. But Flash animations can
    be done at any frame rate, which raises a couple of important
    questions:what frame rate should you work at, and second, if you
    choose to work at a rate other than 30 frames per second (fps), how
    do you convert to 30 fps? I deal with the question of frame rate
    conversion below.
    You can create a Flash movie at 30 fps. But if is going to be
    played back on a computer, a 30 fps .swf file will generally
    produce unacceptably high data rates, unless the image is very
    small and simple, or the computer it is playing on is very fast. It
    can also create a lot of extra animation work if you want to draw
    in-betweens for all 30 frames. Fortunately, there is no need to
    build your Flash movie at 30 fps, even if you are planning to
    transfer it to video.
    I usually build animation that needs to work on the web or
    video at 12 fps. This gives us a good balance of lower data rates
    and smoother animation. When creating cartoon style animation, it
    also keeps our work consistent with the majority of broadcast
    animation. While some high end cel animation is done at 24 frames
    per second (the rate that film is projected at), much broadcast
    animation is created at 12 fps. This is because it is drawn on
    "2's." In other words, each image holds for 2 frames. Do the math
    and it becomes clear why--half the amount of frames to draw each
    second. While Disney and Dreamworks may have virtually unlimited
    budgets to create their epic animations, most broadcast (and even
    more so, Internet) productions are on very tight budgets. But even
    the big studios do a lot of character animation on 2's. It looks
    good that way, so why create twice the work?
    If we are using flash to build a cartoon solely aimed at
    broadcast or film, however, we build it at 24 fps. That way we can
    animate on 2's for most of the character animation, but do animate
    on 1's for segments or particular motions that require smoother
    animation.
    If we are using Flash to build graphics for broadcast use
    only, and so won't be hand drawing in betweens, we usually build
    the file at 30 fps. This will give us the smoothest motion, and
    data rate won't be an issue for you. It is also possible to even
    build it at 60 fps, and convert this to a 30 fps video with fields
    In the end, you can decide to build it at any rate you want.
    The lower the rate, the smaller the file size, data rate and number
    of frames to animate, but the less smooth the animation.
    Conversely, the higher the frame rate, the higher the file size,
    data rate and number of frames to animate, but with smoother
    animation.
    now I use
    FLASH VIDEO MX PRO
    to covnert Video in multiple formats to FLV or SWF, I set the frame
    size just as above, I always get soomth Flash
    at the meantime, I have to set video rate when I use
    FLV To Video Convert
    Pro to play the video in my iPod, if you set the wrong frame
    rate, your iPod and other devices may not support the frame rate

    Usually video quality has nothing with frame rate, but when
    you convert flash to iPhone or other devices, you should think of
    which frame rate video can your device play. when I convert .swf to
    iPhone with
    SWF to Video
    Converter, as you know, iPhone can only support frame rate from
    2 to 15 or a little more, I always choose 15. In this scare, frame
    rate is higher, the quality is better.

Maybe you are looking for