Frame Rate - Need to change it

Question...
How do I change the frame rate of capture from 15 to say 1.0?
If I ever try through a controller or just p.setRate(), I get a run-time complaint that I can't change the rate on an unrealized player/processor. So, I do it after I realize and it runs well, but ti doesn't change the frame rate. Any help is appreciated!

i changed the frame rate for a video file.. not for webcam live video..
i designed a player with its tools..
one of these tools increase or decrease the frame rate..
remember its from video file...
good luck

Similar Messages

VF01 tansaction Kurrf (Exchange Rate) need to change as enable

Hi all,
I need to change the Kurrf (exchange rate) for VF01 and Vf02 as enable.
Can u please suggest me how can i do this.
Regards
Madhu

Hi Madhu,
there are two options here.
One is by using the SHD0 T.Code by entering the valid values in the screen variant.
Second one is Press F1 on the field and check for technical information.
Check the program name and screen number.
Goto T.Code SE51,enter the program name and screen number in that.
Check the layout and in the field you requested there you can find in the layout.
Click on the field and go to attributes where you can make it as editable or inputtable text box.
Regards,
Krishna.

Consistent frame rates until level change :: inconsistent rates now?

Adobe Premiere Pro CS4
I use a Flip Video camera. I used to be able to add my videos without a hitch, but when I up-ed my export level from 3.1 to 4 (native resolution for the videos is 1280x720), and my profile from Main to High, all my videos got raped. The frame rates used to be 30, but now every video has a funny rate, like one has 28.93, and another has 2.53; the audio plays as if it were still in sync with the video.
I have since then tried resetting the export options to all the settings that had worked for me in the past, and I even made new copies of the raw video, but reimporting the video just gives then new wacky frame rates. I tried the "Interpret Footage" feature, and while that fixed the video framerate, my audio was VERY sped up.
How do I get my videos to import with the settings they were recorded at? Media players play them fine, but Premiere claims the metadata calls for 2.53 frames per second. It used to be 30 frames per second, but export options screwed them up, and resetting them did not fix the raw footage.

Just ran into this issue, too. Same thing - Flip footage worked great, then all of a sudden the frame rates went wacky.
Here is what I did to solve it.
Closed premiere.
Opened my cache folder (mine was set to the project folder).
Deleted all the .cfa and .pek files
Deleteed all the preview files and encoded files.
Started premiere and started a new project (HD 30fps).
Loaded all the clips I used in my original video. They call loaded properly this time (30 fps).
I saved that temp project. Closed it, and reopened my original project. Voila . All correct frame rates. My best guess is that premiere writes a little note about how to handle these files in the pek files, or maybe the cfa files, and only by clearing them and resetting them with a fresh import was I able to correct the issue.
Good luck.

How to change Flex Application frame rate at runtime

hello,
i have Flex application that need to change the Frame Rate at
runtime.
when i am changing it by using the slider component, here the
code:
private function onChangeSlider(e:Event):void
frameRate = sliderFR.value;
trace(frameRate);
<mx:HSlider id="sliderFR" x="452" y="765" width="378.2"
minimum="1" maximum="50" liveDragging="true" snapInterval="1"
value="25" change="onChangeSlider(event)"/>
the value is changed, but the frame rate is not changed.
when i insert the binding to the <Application> tag i
got error on this one, because i can't bind there items for the
application level.
how can i change the Flex frame rate at runtime?

i found the solution!
in Flex application you have frameRate properties that
doesn't work at runtime in the ActionScript code.
if you have a video that you want to change the speed of it,
you need to change the stage.frameRate (of all the Player itself).
and there is a catch here. if you will try to change it right after
the application will start (like in: creationComplete event) you
will have a runtime error.
what you need to do is, change the stage.frameRate value
after the all application is started from a button or other event
in the system.
this is working grate for fast/slow FLV playing
enjoy!

Changing animation frame rate when rendering in photoshop does not change the length of the video?

I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it.

FrameRateControl to change frame rate

I have created code that runs on both Linux and windows.
The purpose of this code is to change the frame rate of capture device(webcam).
I have created a processor, and player, get FrameRateControl, and use setFrameRate(5.0f).
I have tried multiple combinations, just processor, just player, etc. and tried setting frame rate to different number, without success.
stopping processor, stopping player, setting frame rate, the starting again, and frame rate does not change!!
I have even created a ProcessorModel, with one format, specified frame rate, but still doesn't change.
Any one have ideas, or suggestions????
I can post code, but has lots of comments, and is messy, just a warning.

tcp packets are always waiting for ack thats why performance are low - and the error correction mechanizem ensuring data will reach his destination is also not helping you -
you will have to use udp - (rtp/udp)
contact me for more info
[email protected]

PAL - NTSC frame rate not changing

I'm using compressor for the first time (version 2.0.1) and I'm trying to do a standards conversion of PAL to NTSC.
I selected advance format conversion DV NTSC. It works fine except the frame rate is left at 25 fps even though the inspector had 29.97 in it before I submitted. I've tried it a few times now but the frame rate isn't changing to NTSC rates.
Any ideas?
Thanks
Mike

How are you determining the ending framerate (what utility or method)?
Also, the QuickTime Player always uses a 30fps counter, thus it can be a little misleading if you go simply by the head position counter.
As for using Compressor 2 to do standards conversion, unless you explicitly turn on the new Frame Controls feature and use the Rate Conversion option you will just get resizing and frame duplication when you convert from 25fps PAL to 29.97 NTSC.
Perhaps, however, you two are using some other technique to determine framerate (I'm just looking at what the QuickTime Player reports and also by counting the actual displayed frames when I single-step the movie -- thus my original question). I've not done a lot of standards conversion, but I just tried to twice-convert a short NTSC video segment and it seemed to work fine when I reconverted from PAL back to the original NTSC. However, since I'm NTSC based I had to create my own PAL after starting from an NTSC original (probably not a completely valid test since Compressor is doing both conversions).
So, another question would be what is the source of your PAL video? I'm sure you did not "synthesize" it as I did, but maybe there is a conflict between your source and Compressor.
In any case, I'm using Compressor 2.0.1 and I just converted an NTSC clip to PAL and back again (PAL to NTSC) and the framerates seemed to work fine (using Compressor's Advanced Format Conversions presets). When I went from NTSC to PAL I ended up with a 25fps movie that had dropped frames from the original. Then, when I went from PAL to NTSC I ended up with a 29.97fps movie that had frame duplicates (unless I explicitly use the Frame Controls -- Rate Conversion option and then with the higher quality options I get newly generated frames using Compressor's so-called optical flow technology).
Also, Mike, your tag line indicates that you are using Mac OS X 10.2.X, but that can't be the case if you are using Compressor 2 since it requires QT7 which is only available on 10.3.9 and 10.4.X.

When is new frame rate for HD projects?

Cyberbretheren...
Those working in film especially CGI stuff know that there's a new frame rate of 23.976. Any word on when Logic will add this option?
Pro Tools already has, nudge nudge wink wink....
A
G5 dual 2.5 Mac OS X (10.3.9) Stylus AND my original Minimoog. Lots of MOTU. No more Digi.

Yeah, "24 drop frame". I asked the Logic reps at last years' NAMM show if this was going to be added to the next version of Logic, but I got the ol' blank stare -- they had never heard of it! Hopefully by now they have. I agree, this new frame rate needs to be added. Glad you brought this up!

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

24 drop frame support needed

Hi All,
Just got a short film to score (an independent film shot in 24p) and the frame rate is at the new 24 drop frame rate. Logic doesn't support this frame rate. In the spirit of keeping up with the times, and, considering that Logic is used by many film composers, this frame rate needs to be supported.
I would like ask that anyone interested in lobbying for this feature for their own purposes (or if you're sympathetic to the need for 24 drop frame rate suppport) to please do two things:
a) submit a feature request on Logic Pro Feedback
http://www.apple.com/feedback/logicpro.html
and...
b) visit to Logic Pro Help and vote for this feature on their Feature Request Database:
http://www.logicprohelp.com/viewforum.php?f=12
Many Thanks,
-=iSchwartz=-

Hi All,
Just got a short film to score (an independent film shot in 24p) and the frame rate is at the new 24 drop frame rate. Logic doesn't support this frame rate. In the spirit of keeping up with the times, and, considering that Logic is used by many film composers, this frame rate needs to be supported.
I would like ask that anyone interested in lobbying for this feature for their own purposes (or if you're sympathetic to the need for 24 drop frame rate suppport) to please do two things:
a) submit a feature request on Logic Pro Feedback
http://www.apple.com/feedback/logicpro.html
and...
b) visit to Logic Pro Help and vote for this feature on their Feature Request Database:
http://www.logicprohelp.com/viewforum.php?f=12
Many Thanks,
-=iSchwartz=-

After adjusting frame rate audio is too slow

I was having trouble with my video being too slow (Nikon d5300 recording at 1920x1080 and 60i frame rate) and I changed it from 59.94 to 29.97 and it corrected my video but now my audio is too slow. What can I change now to fix audio so that the video stays corrected?

I hope this is what you guys were talking about.
General
Complete name : /Users/macbookpro/Desktop/DSC_0119.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 178 MiB
Duration : 1mn 3s
Overall bit rate : 23.6 Mbps
Encoded date : UTC 2014-03-06 03:52:37
Tagged date : UTC 2014-03-06 03:52:37
NCDT : NCTG
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1mn 3s
Bit rate : 22.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 59.940 fps
Original frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.177
Stream size : 166 MiB (93%)
Language : English
Encoded date : UTC 2014-03-06 03:52:37
Tagged date : UTC 2014-03-06 03:52:37
Color primaries : BT.709
Matrix coefficients : BT.601
colour_primaries_Original : BT.709
transfer_characteristics_Original : BT.470 System M
matrix_coefficients_Original : BT.601
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 1mn 3s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 11.6 MiB (7%)
Language : English
Encoded date : UTC 2014-03-06 03:52:37
Tagged date : UTC 2014-03-06 03:52:37

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

Is it possible to change the frame rate of a motion template?

Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
If not in Motion, how else could this been changed?

Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

How to change the maximum frame rate of the camera by changing the image size?

I have two acA2040-180km cameras which are connected to 2 NI PCIe-1433 framegrabbers, I am monitoring my cameras by LabView, maximum allowable frame rate is about 187 for full resolution images, but I just need a small fraction of the images, I know if I make the images smaller, FPS will get higher, but it isn't possible by changing the image size in NI MAX, I've also tried to change the size by defining the region of interest in the grab setup.vi, but it would be after going to camera so it isn't the case as well, so I need a VI to go to the camera before starting to take photo and define the region of interest which is going to be captured, would you please help me to find it?
Please help me, this problem get me stuck!!!

Have you tried changing the image size using property nodes as Bruce suggested? Do remember with Basler cameras, reducing the width only will not affect the transfer speed but the reducing the height will. Have a look at the frame calculator to understand what you frame rates you can acheive with certain settings:
Basler Frame Rate Calculator
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Change Frame Rate in Adobe Presenter

I have a Flash File that runs with 12 Frames Per second and I need to integrate this with Adobe Presenter. The Frame Rate for Adobe Presenter is 30 Frames Per Second. Here is where I am facing an issue.
Is there a way to change the frame rate for Adobe Presenter??
Thanks in advance

Nope. Unless you want to get into reconfiguring the viewer.swf and other associated swf files, you're pretty much stuck w/ the 30fps setting.
Rob
http://www.robrode.com/yabb/

Frame Rate - Need to change it

Similar Messages

Maybe you are looking for