Exporting from QT7

Hi All,
Anyone had this experience...
Installed Quicktime 7 and can't export a thing.
Wrote to Apple telling them I wasn't a Beta tester and they really should make better software (never got a reply)
Re-installed 6.5.2 and everything cool again.
Got caught out by software update and ended up with 7.01
Same problem - reinstalled 6.5.2...bingo it exports again.
Got caught out by software update AGAIN and ended up with 7.02! Still doesn't export.
Reinstalled 6.5.2 via reistalling 7.01, and all is cool once more.
Is anyone else having trouble exporting?
I usually render my movies full rez then use QT to resize and compress using Sorenson 3 for client approvals online.
But QT7 just doesn't want to know.
Is it because I'm still on 10.3.9 and haven't upgraded to Tiger?

Hey Kirk,
I wish it was that simple.
What galls me the most is that I did purchase a Pro Key for QT7, even though I can't use it because it won't export.
Whenever I try to export a just get a failure message.

Similar Messages

Can't open quicktime movie that I exported from FCP 5. Help!

Can't open quicktime movie that I exported from FCP 5. Help!

What arrow?
Have you tried opening the file in FCP?
If there is no error message and it will not play in QT7, it is quite possible the file is corrupted. You will need to go back to the original project and re-export the file.
x

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

Exporting from Keynote to Power Point

I live in Kenya in East Africa and run photographic safaris. I use Canon digital equipment (still photography) and at the end of each safari set up a slide show of the better images taken on the safari and give it to the guests. I present my images using power point as this seems to be the most universal way to present slides.
I own a 17 inch Power Book G4 and also a 17 inch Mac Book Pro. I use Aperture on both Macs.
On my new Mac Book Pro I have problems. After editing in Aperture, I then export my versions ( in any format - Tiff, Jpeg ) to a file and then import them from that file to power point. Power point seems to remove all the punch of the images making them look very flat and hardly worth looking at. Why?
I have managed to by pass this problem on my Power book G4 by exporting images from Aperture as Tiffs, these seem to work quite well when they are imported into Power point, except the files are huge.
What this means is that I own a Mac Book Pro but don't use it as it can't do what is required. I hope I am doing something wrong or that there is an alternative method to presenting slides.
I have Keynote, which works well. Sadly most of our guests are PC users and so would like the slides in a PC format. Keynote allows you to convert to power point, but here again the picture once in power point looks flat, Why?
Is there a better method than Power point to present slides? In a presentation I like to have text, single and multiple images per slide.
I have used iDVD, but there are not enough pixels on a TV screen (when showing still images) to give you a punchy clear picture, or so I am told.
I would love any suggestions to help with this problem.

Hi Ngiri
It's not really clear to me how you or your guests are assessing your "flat" photos - on a computer screen, via a video projector, on a TV?
Most of my photo slide shows are created using DVDStudioPro - look fantastic. Distributed as a PAL DVD "best viewed on a TV".
Lately I have tried some photo presentations using Keynote, and then exported to Powerpoint. Photos looked fine, but PP is unacceptable. I then tried exporting from PP straight to PDF. Using a PDF for a presentation was a revelation - photos look very good. The PDF is a small cross platform file.However, I still prefer DVDStudioPro, but it takes much longer to create a DVD.
Have you actually tried Keynote straight to iDVD? Or a slideshow created within iDVD? (Lots of tutorials available).
I have used iDVD, but there are not enough pixels on
a TV screen (when showing still images) to give you a
punchy clear picture, or so I am told.
???I don't understand why anyone would tell you this???
Of course, Aperture could be the problem...or your Mac Book Pro is incorrectly setup.
Regards. Robert
G4(7 y.o)1.5GHz 1.25 GB Ram, 2x120GB intHD, orig AGP & Radeon 9200 PCI card Mac OS X (10.4.8) 2monitors, CRT TV, FCP5.0.4, DVDSP4.1.1, STP1.1, Comp2.3, LT2.1, QT7.1.3

IPod music player crash when playing podcast, exported from GarageBand

Hello!
Before start, I'm using this soft/tools: GarabeBand '11 (6.0.4.) on Mac OS X(10.7.2.), podcast, submited in iTunes, and iOS 5 on my iPod Touch 4. All software is up to date.
So. I have a podcast which Is playing fine everywhere, on Mac, iPod etc. But the latest episode I did yesterday, I made with GarageBand to try "Chapter Marks" feature which I did not used before. Then I export podcast to my Mac and upload to my server to make available in iTunes Store as I usualy do.
Then I downloaded latest episode of my own podcast in iTunes, transfer it to iPod, and found that this episode cannot be played on it! I mean, it transfered well, it shown in episodes list of my podcast, but when I tap to play - music player app just crashing all the times. All previous episodes works fine, so I guess the problem with latest episode is because of GarageBand.
I've tried many different export settings in GarageBand: AAC Encoder with Higher Quality (192 kbps), iTunes Plus (256 kbps) and Custom settings 320 kbps. Also I tried all options in "Quality" dropdown menu in Custom settings: High, Higher and Highest.
But result is still same - this episode, exported from GarageBand, crashing on iPod (although It can be played normaly in iTunes on my Mac).
Would be glad for any suggestion how to solve this. I feel very bad cause subscribers of my podcast downloading "broke" episode :-(
p.s.
Here is podcast in iTunes Store - http://itunes.apple.com/ru/podcast/daniel-lesden-presents-rave/id423519688
Here is RSS feed - feed://ravepodcast.com/downloads/podcast.xml
The problem with latest episode, #017.

I examined the episode media file. In QuickTime Player 7 it shows the chapter images, which are 160x160, and plays normally.
However in QuickTime Player X it doesn't show the images, but opens to a very large black player. The info in QT7 looks like this:
You will notice that although at the bottom it says 'Normal Size 160 x 160 pixels', in the top section it refers to a JPEG at 6227 x 6227 which I suppose is an embedded image, though I can see no evidence of one (unless it's plain black): an image this size wouldn't show on an iPod and would very possibly crash it.
I can't explain how this got there - I've never used GarageBand to make a podcast - but you should have an investigation and try to locate and remove it; it's very likely the cause of the problem.

Auto-generated links exported from InDesign do not work in tablet apps

Hyperlinks automatically detected and exported from InDesign CS6 8.0.1 as a PDF work fine on the desktop version of Acrobat Reader. However, on the iPad version of Adobe Reader as well as iBooks and GoodReader, these links are completely ignored, meaning they are just text.
On the other hand, if I was to manually set the hyperlink in InDesign or Acrobat, the link works fine.
It would be extremely tedious and time consuming to manually reset hundreds of hyperlinks in my documents since InDesign use to handle this correctly.
Is this a bug? If so, it's pretty serious and should be Adobe's priority to fix since millions of people read documents on tablet devices.

No, it's a Feature of Acrobat and reader that they attempt to create links from anything that "looks like" a URL. Other readers lack the feature.
It's not good practice to depend on this in any case as it's hardly foolproof even in Acrobat. Links that break across lines, for example, will not be properly recognized.

Multiple CSV exports from the one button or pl/sql procedure?

I need to have multiple csv exports from the one press of a button. The easiest way I found to do this is it to use javascript to popup three windows, each as a CSV link. This is a bit ugly though, and leaves the browser popup windows open when the file has been downloaded.
I guess I could also make a solution based on branching, but I think that would be difficult to maintain and reeks of bad design (im not a fan of this spagetti GOTO style code!).
I implemented Scott's custom CSV as found here: http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
However I would like to know if its possible to download more than one file using this method. I could not work out how to do this .
Has anyone got any ideas? Simply repeating the code puts the second table into the original csv file. Is there a way to 'reset' the htp writer or smoething?
Any help greatly appreciated,
Alex

Sorry for the confusion - I guess I mean its easy in .NET because you can simply compress files together and then send 1 zip file down as the response. See http://www.developer.com/net/net/article.php/11087_3510026_2 for details.
I guess I could ask how to do this in APEX - but it seems to me that my original wording addresses the concept at a much more abstract level. I may not find the best solution for my problem if I just asked 'how can I dynamically zip together three tables as seperate files and send them to the client?'. I also suspect that this method is not possible in APEX without custom packages. Please prove me wrong!
I guess even if I could find some kind of javascript that didnt open a new window, but was a direct download to the CSV, that would be a good compromise. At the moment when you click on the link, three windows come up and stay blank until the files are ready for downloading. Then after the files have been downloaded the windows must be shut manually. Yes, I could use javascript to make the windows 1x1 pixel perhaps, and then shut them after a predetermined timeframe - but this is hardly an elegant solution!
Thanks for your responses.

EMail Link in SWF exported from InD CS5 does not work

I'm trying to find a definitive answer on this. I have designed an interactive document in InD CS5 that has buttons and hyperlinks. When exported to SWF everything works except my e-mail hyperlink. It works fine in InDesign's preview pane. I've uploaded the file to my webserver for testing, the problem still occurs.
I found one post in another forum that quoted an Adobe InD developer stating that as of CS4 email links were not exported. However, I've not been able to find any mention of whether this works in CS5 or not.
Does anybody know for sure whether or not email links work in SWF files exported from CS5?

Sorry, no offense was intended. I had found references to problems with CS4, but nothing about CS5, and said as much in my post -- was frustrated that I had spent a long time looking and hadn't found any responses yet.
You mentioned using buttons rather than hyperlinks, and that worked for me -- but it might have just been a problem with my browser not properly reloading the flash file, too -- as I mentioned in my response.
But in any case, THANK YOU FOR YOUR SUGGESTION!

How do I link to Anchor Text from browser to PDF file exported from InDesign?

I see that this question was asked previously but not answered:
http://forums.adobe.com/message/3737541
I need a way to link to topics (from an HTML page) within a structured PDF file generated from InDesign, i.e. one that has an interactive bookmarks
panel, that doesn't break the links when the file is updated.
In particular, I don't want to refer to:
* page numbers because the document will repaginate when it is updated, breaking existing links
* named destinations that are numeric as addition/deletion of topics renumbers the named destinations, breaking the links.
Is there any option in InDesign that creates named destinations derived from bookmark titles as that would seem to solve my problem?
I have a similar need, but I have not been able to find an answer anywhere online, even after a several hours of research.
I am on contract with General Electric to develop a UI Style Guide for an international team of developers. My client wants to be able to distribute the Style Guide as a PDF document, but needs to provide links to specific topics when submitting a "Story" in an Agile development environment to the programmers.
Ideally, I would like to be able to create "named destinations" in InDesign such that I can provide the client with a list of URLs similar to this format:
file:\\StyleGuide\Test1-20131024a.pdf\#nameddest=AnchorText-01
However, I can not figure out how to create "named destinations" in the PDF file from the InDesign file in which I have created the Anchor Text in the Hyperlinks tab.
Alternately, the client would be satisfied with the ability to link to specific bookmarks in the exported PDF file that have been derived from the configuration of the Table of Contents styles, but my research has led me to believe that it is not possible to hyperlink from a browser window to a bookmark in a PDF file (only to specific page numbers, search word lists, named destinations, and comments) as described here: http://blogs.adobe.com/tcs/2011/01/tcs-specific/linking-to-a-page-within-a-pdf-and-more.ht ml
Having been using InDesign since 1988, when it was PageMaker, I would prefer to use it to provide GE with the most attractive deliverable, but they are now leaning heavily toward having me licensed with Madcap Flare, which has this capability built in:
http://webhelp.madcapsoftware.com/flare9/Default.htm#Nav_Links/Named_Destinations/Creating _Named_Destinations.htm
Please help me to find a solution that will allow me to continue using InDesign for this project.
Thank you!
Lynne O’Connor
Technical Writer (contractor)
GE Oil & Gas - Measurement & Control

Follow-up post (solution is not available):
I have just completed a phone call with Gaurev Sethi of Adobe escalated technical support in which I shared my screen to explain and demonstrate the desire to link from an external URL to a specific location within a PDF file that has been exported from InDesign. After 40 minutes, during which I was placed on hold a few times while he consulted with his team, it was determined that the desired functionality is not supported in InDesign and has been identified as a limitation of the software.
In researching alternate documentation software that supports PDF export, I discovered that Madcap Software supports this functionality in its Flare product:
http://webhelp.madcapsoftware.com/flare9/Default.htm#Nav_Links/Named_Destinations/Creating _Named_Destinations.htm
Note that linking via URL to a bookmarked location within a PDF is not supported:
http://blogs.adobe.com/tcs/2011/01/tcs-specific/linking-to-a-page-within-a-pdf-and-more.ht ml
More about parameters that can be specified to open PDF files are available here:
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Although the above link is for a previous version of Acrobat, I could find no evidence to the contrary in the current SDK documentation.
-Lynne

EPUB exported from InDesign works on iPad and not on Android tablets

I've edxported several similar books to EPUB from InDesign CS5, using the same technique each. After exporting from InDesign, there's a lot of tweaking of the HTML code and some changes to the content.opf and toc.ncx, but the finished product for all of the books works fine on iPads but some do not work on Android tablets. There are six separate InDesign documents in each epub book...three small, one large, and then two small. Some of the books work fine on Android tablets, but for some of them, the first three documents show up fine, but when one advances to the large document, the book closes. There's no error message. Any ideas what the problem might be? Are there size limitations for documents on Android machines?

As you have found out - it doesn't work.

Best video format to export from final cut pro to encore

hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?

Sure, export it as an uncompressed AVI or QT file.

"Rough" GIF export from ActionScript 3 files impossible?

Hello,
I just upgraded from Flash CS3 to Flash CS5, and I've been playing with the various new features. However, I've just encountered an odd problem that I can't seem to find a solution to.
In the past, I've made animated GIFs in CS3 by exporting them with the "Smooth" box unchecked. This was really convenient for me because not only could I export crisp pixel bitmaps from Flash, but I could edit it in another program later. I was planning on making some GIF animations via this process with the aid of the bone tool in CS4 and 5.
When I tried exporting frames of of a figure created with the bone tool in CS5, however, I got images that were fuzzy and often had distorted colors. After some time, I realized that this was because in CS3, I had exported the images from ActionScript 2 files, while the bone tool only works in ActionScript 3 files.
Is it not possible to export "rough" GIFs from ActionScript 3 files, or is there a trick to doing that that I'm somehow missing?

I'm sorry for not making it clear in my initial post, but it doesn't matter whether I create an image using the bone tool or not -- any GIF image exported from an AS3 file always has an antialiased appearance, even when the Smooth box is unchecked.
To show you what I mean, here's a simple GIF image I exported from an AS2 file:
Notice that all of the lines are simple and pixellated, with no antialiasing at all. This is the kind of GIF I want to export from an AS3 file.
Now here's the exact same image I exported from an AS3 file, with the exact same export settings:
As you can see, all of the lines look smoothed, even though I made sure the Smooth box was unchecked.
Is there anything I can do to correct this problem?

Export from ALV to Excel - problem with numeric values

hi folks,
when exporting from alv to excel and we have negative values (and using an u.s.a. setting where . and , are different to r/3) negetive values are not shown correctly in excel.
when changing in win nt the regional settings to europe one's (e.g. germany) everything works fine.
any hints welcome,
kind regards
oliver

I guess this has something to do with the excel settings. In the control panel you have regional settings.try some options there. It might work.
Regards
Sudhi

Automatise data export from website

Hello,
I stuck with an issue regarding data export from scopus.com. I have 61 keywords for which I want to export (as csv) number of documents by year, country, document type, subject area. Doing that by hand would be extremely tedious. Thus my question if this can be automatised. Unfortunately scopus does not provide an API to access the data directly.
So, the process to be automatised would be:
1. Open http://www.scopus.com/home.url
2. Enter the keyword in "search for"
3. Click on "search"
4. Click on "Analyze results"
5. Click on tab "year" and "export". Save the file
6. Click on tab "country" and "export". Save the file
6. Click on tab "document type" and "export". Save the file
6. Click on "subject area" and "export". Save the file
Do programs exist that help me retrieving the data?
Thanks!

You could achieve your goal with bash and wget with some combination of --save-cookies --post-data.
But be aware that scopus is run by Elsevier, whom many view as the most evil of the publishing companies. Think twice before doing something that may annoy them.

Exporting from InDesign to PDF, and the updated PDF is larger than a month ago and not printing easily on letter paper, it is PDF presets?

Hello,
I am exporting from InDesign to a PDF and the page is larger in the PDF then others I have exported. Is this because of the PDF presents? One of the project managers is not able to print it out on 8.5 x 11 paper, but the document presets for InDesign are the same as before. I wish I could upload the PDFs to show, but the newly exported PDF is larger than the version I created a month ago. I created a PDF binder and the newly updated PDF is almost a .5 inch wider with the same export presets. Any thoughts?

Sadira00123456789 wrote:
One of the project managers is not able to print it out on 8.5 x 11 paper, but the document presets for InDesign are the same as before.
I suspect the project manager simply has his/her copy of Reader/Acrobat set to print at actual size, rather than "Fit" (assuming the InDesign page size is truly 8.5 x 11).
..the newly updated PDF is almost a .5 inch wider with the same export presets.
It would have nothing to do with export presets. How are you determining that half-inch difference?

Exporting from QT7

Similar Messages

Maybe you are looking for