Exporting InfoArea as XML by Transport Connection
Hi to everyone, i hope somebody can help me.
I tried to export InfoAreas as XML via the Export Feature within the Transport Connection.
Unfortunately when I import the generated XML File, in a new bw system - the InfoAreas will not be generated.
The Import message says only Object successfully saved and the xml file looks correct to me.
In the source system Objects are collected in automatic mode and grouped data flow before and after.
I heard that exporting InfoAreas is a known bug in SAP BW, is this truw?
TIA
Mike
Problem solved
Similar Messages
-
Using XML Import/Export in Transport Connection
Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... JodyThis is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John -
Move out Info Provider to other server without transport connection?
Hi All,
Could you share you thought ?
Is there a possibility to move out the info provider design & info object to other server without transport connection ?
The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
Any thought from all of you ?
If you have the way, appreciate if you can share it to me.
Thanks a lot and have a good day,
Best regards,
Daniel N.Hi,
From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it. -
Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.comhi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I set up my drag and drop questionaire to export to a XML file?
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and drop rank order response of 1,2,3,4.How do I set
up a XML file that receives the responses.I don't understand how to
do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>Use XML.sendAndLoad.
http://livedocs.macromedia.com/flash/8/main/00002879.html
You will need a server script to receive the XML structure
and it depends on
the server scripting language how you obtain that data. Then
you can either
populate a database or write to a static file or even email
the XML data
received from Flash.
For a basic example, I have two links I use for students in
my Flash
courses:
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLASP/Ex01/XMLASPEchoEx01_D oc.php
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLPHP/EX01/XMLPHPEchoEx01_D oc.php
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"kenpoian" <[email protected]> wrote in
message
news:e5i9hp$cs6$[email protected]..
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and
drop rank order response of 1,2,3,4.How do I set up a XML
file that receives
the responses.I don't understand how to do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment> -
Cannot locate InfoCube in transport connection
Hi experts,
I'm not able to find the cube 0IMFA_1 (IM-FA: Assigned Plan and Budget) in the transport connection under the following InfoArea: 0FMCO->0IMFA->0IMFA_IO
Am I searching for the cube in the correct location ?
Searching for it under object type 'InfoCube' didn't help either.
Can anyone suggest what could be the problem and solution for this?
Thanks in advance.
Regards
ArvindThanks for your answers!
In fact the cube was not installed at all and it was still in 'D' version ..
Since I found some other objects related to the same area in AWB I assumed that the cube would also be available
Regards
Arvind R -
Use an existing request in transport connection
Hello
I want to add objects into an existing transport request with transport connection.
How can i do?
Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
Thanks.Dear Fernando Ariel Gonzalez ,
I think we can..
Please go through the steps below,
1. Go to rsa1 -> business content
2. Choose 'grouping' as "in dataflow afterwards"
3. choose 'collection mode' as "collect automatically"
4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
5. Select your query / queries
6.choose 'create transport request for BEx' and select appropriate development class
To Release a request....
se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
if request has 'child' request, need to release it first.
To delete or remove request
Goto SE03
Requets/Tasks > Unlock Objects
Give the Request num & Execute
Now Delete the Request on SE09
It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
For more information....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
/message/1257362#1257362 [original link is broken]
Re: How to collect & transport new cube & new update rules
Re: Transport to BWQ issue?
Re: Transport a query from BWQ to BWP
Hope it helps you,Revert me back if you have any queries
Regards
Bala -
BW export data source DEV- QAS transport
Dear Gurus
There are
two problems with trancport DSO 0cfm_o01 to Quality System.
Export datasource 80CFM_O01 has been transported to QAS without DSO,
and I can't
delete it from QAS(changes possible) via RSA1, RSA6
(Mapping
between 80CFM_O01 BWQCLNT001 80CFM_O01 is inconsistent).
Please,
help with transport DSO with nessesary object and generating datasource
80CFM_O01
Best Regards,Have you tried to transport DSO from Dev to Qua?
if not then please transport your DSO from Dev to Qua.
While collecting DSO into transport from RSA1-->transport connection, use grouping option as only necessary objects.
Cross check, your DSO need to be stored in custom package instead $tmp.
Cross check your transport request have any inconsistencies or not thru program - RSO_TLOGO_CHECK_REQUEST . -
Why created package with SE80 can't be found in Transport Connection?
We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here. Could someone tell us why?
Thankshey AHP,
Yeh, if I run rsdcube and follow the menu you specified, I can assign the InfoCube to the custom package I created with SE80. I wonder why it's to work in this way? If clicking the Package picture icon with pencil in Transport Connection doesn't work or successfully to bring up the correct custom package we created, then why SAP has this stupid picture icon over there to mislead our developers?
You asked me how we created the custom package, we created them with SE80.
BTW, someone says that's BASIS work to create package to do the transports in their companies, how about your company? You don't have to create custom package and just assign the objects to the package BASIS creates for you?
Also someone says the ideal transport strategy is to group by "Necessary" other than "Dataflow Before and Afterwards", how do you think?
Thanks -
Unable to find the Transfer Rules in Transport Connection
Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
TysonAnother way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN -
Advice on ADDT Export Recordset as XML Tutorial
Hello all,
I recently had a situation where I needed to use ADDT's "Export Recordset as XML" behavior. However, the "Export Recordset as XML" behavior creates a php page that generates the XML when the php script is run and the resulting XML is published to the browser.
Unfortunately, I needed the php page to not publish to the browser, but to write the generated XML to a real XML file. I looked for help in the forums, but I was unable to find any information regarding this and it seemed some people had been looking for this ability.
I was able to figure out how to use ADDT's "Export Recordset as XML" to write the XML to a file when the ADDT created Export XML php page is run.
I want to share a brief description on how I did this. However, I had to modify the ADDT file "XMLExport.class.php" to get this to work. The modifications are are very simple and easy. You just have to comment out a few lines and change an echo to a return in the "XMLExport.class.php" file.
Before I take the time to write this up, I wanted to be sure it's ok to explain in these forums how to edit ADDT files. I know the license agreement allows me to modify the code for my own use. But does the license agreement allow me tell other's how to modify the code?
At the top of the Adobe "XMLExport.class.php" page you see this:
Adobe permits you to use, modify, and distribute this file in accordance with the terms of the Adobe license agreement accompanying it.
Rather than try and decipher a license agreement, I thought someone, probably Gunter :), might be able to let me know before I go to the trouble.
Thanks,
ShaneHi Shane,
But does the license agreement allow me tell other's how to modify the code?
As this snenario isn´t explicitely mentioned respectively prohibited, I don´t see any problem at all with telling folks how to modify an ADDT "includes" file, though I´m not sure about the "distribution" aspect, as - to my understanding - an original or modified ADDT file can´t be offered for download or sent to others per email or whatever else might qualify as "distribution".
My suggestion for remaining on the safe side :: just write a tutorial and tell folks how to modify whatever file, because merely providing an information about a modification certainly doesn´t tangent the "use, modify, and distribute" definition of the license at all -- however, it´s the reader of your tutorial who´s having to decide whether the suggested modification is in accordance with the terms of the Adobe license agreement, though this shouldn´t be a problem as well, as they´re going to modify the code for their own use :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Export Recordset As XML w/ session variable
I'm trying to use the Export Recordset As XML function. It works great for recordsets without any variables (such as a session variable), but as soon as a add a variable to the record set, I get a "Header already Sent!" Error.
The prior (non-adobe) version had a "variable" selection on the Advanced tab which seems to be gone now.
How do I add a session variable to the recordset and have it play nice with Export Recordset As XML? I need an XML doc that only includes a specific users information. The session variable is made when the user logs in to see the data.I'm trying to use the Export Recordset As XML function. It works great for recordsets without any variables (such as a session variable), but as soon as a add a variable to the record set, I get a "Header already Sent!" Error.
The prior (non-adobe) version had a "variable" selection on the Advanced tab which seems to be gone now.
How do I add a session variable to the recordset and have it play nice with Export Recordset As XML? I need an XML doc that only includes a specific users information. The session variable is made when the user logs in to see the data. -
I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?
Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly -
RMI Protocol over JRMP transport: connection refused
I changed the look and feel for disco plus to Jinitiator. I then started getting error RMI Protocol over JRMP transport: connection refused to host: 192.168.1.1
I changed the settings back to java plugin 1.4 but I'm still getting the same error on all client machines.
I'm running windows 2003 and application server 10.1.2.0.2
Thanks for any help,
BrianHi Brian
When you changed to JInitiator what did you set the style to be? Also, why would you not want to use the Sun Java?
Anyhow, try getting the users to clear their local Sun Java cache, this will release the applet causing it to reload upon next connection, and try again.
If you want to retry JInitiator, try this:
1. Go to Control Panel | JInitiator 1.3.1.x or whatever version you are using
2. Navigate to the Proxies tab
3. Uncheck Use Browser Settings
4. Click the Apply button
5. Close all browser windows
6. Reconnect to Discoverer Plus
If the above steps do not help, try editing the security details of the Options menu in the Internet Explorer using this workflow:
1. On the client machine, launch IE
2. From the toolbar, select Tools | Internet Options
3. Navigate to the Security tab
4. Click on the Trusted Sites icon
5. Click on the Sites button
6. Add a fully, qualified HTTP link to your server
7. Close all browser windows
8. Reconnect to Discoverer Plus
Of the two solutions above, the first is most likely to fix your issue. However, I advise all my customers to set up the application server connections as being trusted sites.
One additional thing would be to delete your cookies. Discoverer Plus loves cookies.
Best wishes
Michael -
RMI Protocol over JRMP transport: connection refused to host: 10.10.10.10
Hi,
We migrated our Discoverer 9.0.2 to 10.1.2. However, when we connected to Discoverer Plus, the message saying "RMI Protocol over JRMP transport: connection refused to host: 10.10.10.10" appeared. We use the "Default" communication protocol and Sun JVM 1.4+ is installed in the client. Do you know what's happening?
Thanks.
AndyHi Andy
It could be a Java incompatibility issue. On one of your client machines try removing Java altogether and then reconnecting to Discoverer Plus. The server should send down a new, clean version of the Java.
Try this and let me know how you get on
Best wishes
Michael
Maybe you are looking for
-
I need to transfer my itunes librairy from a pc to my new mac. How to do?
I need to transfer my itunes librairy from a pc to my new mac. How to do?
-
Dear All, I want to keep provision to inventorise CVD, ECESS, SECESS some of the times. So i have created ZCV1, ZECV, Z1CV conditions. My Import Pricing Procedure is ZIMPOR. We are using TAXINN Procedures. I have maintained the above conditions in Cl
-
My form was working properly but today, 20 June, an applicant clicked on the website link and got an error that says, "error opening document, please try again later". How can this be fixed?
-
Can I transmit a region 1 video from my PC through my Apple TV to my TV?
Can I transmit a region 1 dvd from my Pc through Itunes and Apple Tv to my TV (being region 2 my dvd player cannot take it) If this is possible how do I do it?
-
Index is not used (why and what should i do) table too big
hi guys, having a headache now. (on 10gR2 on linux system) I used to have a large table and this is how i managed it. (i am on standard edition (thus i have no partitioning) i would have a 1) cron job run daily to keep track of the lowest and highest