Express cant extend wireless network

I have a Airport Exteme which I use as my wireless base-station.  For two years I used an Express to extend the network wirelessly.  It worked fine but this week it died so I gought a new one.
However I can not wirelessely extend the wireless network using this new Airport Express.  It works fine using an ethernet cable but this isnt covnenent.  The issue is when I get to the screen that says "Select the Apple wireless device you want to extend.  If you are not sure click Identify.  If your Apple wireless device is not on the list click Scan Again".  The list is empty no matter how many times I hit rescan.
Am I missing something?
Thanks in advance.

Option appears but, I since the old airport is dead, nothing appears in the list.

Similar Messages

  • Wired airport express to extend wireless network and connect network printer?

    Is it possible to configure and connect an Airport Express via ethernet cable to an Airport Extreme base station in order to extend wireless network AND connect a network printer to it?  Here's the deal...The Airport Extreme is directly connected to my DSL modem and the wireless network is working fine in my house, but, the signal does not reach my detached studio/office.  I have a Cat5e cable (and phone line, more on this later) run between the two locations and trimmed out.  I would like to have wireless access and connect my network printer (Brother HL-2170W, wireless or wired) in my studio, be able to use printer from house also, and still have wireless access in house.
    So, ethernet connection from Extreme to Express, USB from Express to Printer, wireless access for all users.  Can anyone talk me through how to (re)configure the Express to do this?  Do I need to make changes to Extreme configuration also?
    JS

    Is it possible to configure and connect an Airport Express via ethernet cable to an Airport Extreme base station in order to extend wireless network AND connect a network printer to it?
    Yes. Apple's instructions for this are here:
    http://support.apple.com/kb/HT4260
    Instead of a second AirPort Extreme as illustrated, you will be using the AirPort Express.

  • Problem using Airport Express to extend wireless network.

    I'm trying to extend my wireless network with an Airport Express (brand new, bought last week), but can only seem to do so by connecting it via cat5 to the router, which doesn't actually extend anything.  I have a Linksys WRT54GS with DD-WRT, and want to have the Airport Express in a different room so cat5 isn't an option.
    I'm using WPA2 Personal security on my network.
    I've tried to follow several sets of instructions from these forums and on blogs, but the only things I've been able to do are...
    1) connect via cat5, selecting "Create a new network" with the same SSID and such, but it doesn't give me any more range.
    2) connect wirelessly selecting "Join an existing network", but that doesn't extend the network at all either, even if I put the AE at the edge of the network now.
    Thanks in advance.  All I really want to do is access my wireless from the other half of my house.
    Zack

    It was possible to create a WDS between the older 802.11g AirPort Express and the Linksys WRT-54GS and this (as you know) has been documented on the Internet. However, I do not know of anyone that has been successful doing so with either of the 802.11n generations.
    The two methods that you have tried would not work as neither is the proper method to set up a WDS. Please check out the following Apple Support article for more details. If you are successful in setting a WDS between them, please post back your results.

  • How to configure Airport Express to Extend Wireless Network

    I have an Airport Extreme (AE1) as my wireless router, with two other Airport Extremes (AE2 and AE3) connected to it via ethernet and operating in bridge mode. Together they cover the first floor of my house with wifi, but I want to use an Airport Express (AX1) situated on the second floor to connect wirelessly to AE2 and extend my wifi network to the second floor of my house.
    Nothing I have tried has allowed AX1 to extend my wireless network. I'm using the latest Airport utility in Mavericks, and AX1 is the old plug-in type but it's the newer "n" version that is still configurable by Airport Utility. Any suggestions would be appreciated.

    I almost ALWAYS recommend against wirelessly extending your network. Obviously, I'm unfamiliar with your layout but 3 extremes on the same floor seems like overkill, too, but could make sense depending upon contruction and usage.
    In any event -
    Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device.
    Risk free test - run some speedtests in the corners then remove an extreme and re-run the tests. Then, buy one of the new tower 'AC' extremes and set it up as your single router and test again. I call this risk free since you have 14 days to return the new 'tower' extreme if you don't want to keep it but its range is THAT much better than the prior gen. You could make this cheaper by buying it from the Apple refurbished store and selling your older extremes.

  • Using wired Airport Express to extend wireless network

    Hello,
    I am considering getting an Airport Express to extend my wireless network in a part of my house where it's really weak.  The room I want to use it in actually has an Ethernet network drop and it is connected to my Airport Extreme on the other side of the house. 
    I've looked at the manual, and the only example it gives for extending a network is wireless.  Since the network is very weak where I want to use it, I was wondering whether I could use the Ethernet port for the incoming signal.  Is that possible?
    I have an older AX (the b/g model) that I use in a similar way: it's on an ethernet port, but it broadcasts its own, different (slower, since it's the older model), wi-signal.  So I didn't want to do that: I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
    Has anyone else had a similar experience and if so, could you let me know if this is possible?
    Thanks!

    I was wondering whether I could use the Ethernet port for the incoming signal.  Is that possible?
    Yes
    I'd like the new unit to be practically transparent and broadcast the same wi-fi as the main signal.
    Configure the new AirPort Express as follows using AirPort Utility - Manual Setup
    Click the Base Station tab located below the row of icons to assign a name to the Express, a device password and adjust Time Zone settings
    Click the Wireless tab and configure as follows:
    Wireless Mode = Create a wireless network
    Wireless Network Name = Exact same name as your AirPort Extreme network
    Radio Mode = 802.11n (802.11b/g comatible) is a good general choice
    Channel = Automatic
    Wireless Security = Exact same setting as the AirPort Extreme network
    Wireless Passwrod = Same password as the AirPort Extreme network
    Confirm Password
    Click the Internet icon
    Click the Internet Connect tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Update to save settings and allow the Express to restart
    Very important...power down the entire network...all devices....order is not important
    Wait a few minutes
    Start the modem first and let it run for a few moments by itself
    Start the AirPort Exreme the same way
    Start the AirPort Express the same way
    Start other devices one at a time about a minute apart
    You now have what is known as a "roaming" network. Computers will automatically log on to the router with the strongest signal as they "roam" around the house.

  • Connecting Extreme to Express to Express to extend Wireless Network

    I am having trouble extending my network with the use of two Expresses connected wirelessly to the extreme.  For some reason, even thought the second Express is just across the room from the frist express, it keeps dropping from the network with the error message to check to see if it is still in range etc.  I am curious what I might do to prevent it from dropping and if it would help to wire together the two extenders (even though the connection to the Extreme is wireless)? 

    Have you swapped the two express over.. as one might have low wireless output or receive.. and swapping will show you something.. if the problem remains. the location of the poor unit is just that.. really poor.. if the problem moves with the express then the express itself is the problem.
    Wireless can alter dramatically with movement of a device by a few cm.
    You need to realise wireless is a 4" (10cm) pipe ( we still buy imperial size pipes!!)
    Which is straight as a die from router to client.. if it happens to pass through say a mirror.. that is a sheet of metal.. no wireless gets through. Or if it passes through a very heavy piece of furniture.. much more signal is absorbed.. The 4" pipe idea can help you see what is the problem.. and give you idea to mount things up high.. where the wireless signal goes through much less material.. including the wet meat bags that insist on sitting in the signal path.

  • Airport Express wouldn't extend wireless network

    Am posting this in case it helps someone else. I have an Airport Extreme set up as a base station and couldn't get an Airport Express to "extend wireless network". I finally found a checkbox in the "Wireless" tab of the "Manually Configure" dialog box for the Extreme that says: "Allow this network to be extended". I could not find this referenced anywhere in Apple documentation, so you have to know to go and check this box. Apologies to the techies if this is a no-brainer, but I only found it by accident. Apple should include a brief paragraph in their wireless troubleshooting guide on extending your network.

    When you configure the Express to "join a wireless network" it becomes part of the network so that you can stream AirTunes to the device or use a remote printer connected to the USB port, but it does not provide any additional wireless coverage in this type of configuration.
    "Extend a wireless network" does the same thing as above, except the Express will also provide more wireless coverage in the area where it is located.

  • How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

    Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
    http://support.apple.com/kb/HT4145
    The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
    Questions:
    1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
    2. How can I tell which of the Airports the attached client device is using?
    The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
    http://support.apple.com/kb/HT4259
    Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
    Mitch

    1. How does the client device know which Airport to connect to?
    The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
    2. How can I tell which of the Airports the attached client device is using?
    On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
    Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
    If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
    Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
    There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Airport Express as very slow in "extend wireless network" mode

    Hi!
    I am using a Airport Extreme (fourth generation) as a wireless router and a Airport Express 802.11n in "extend wireless network" mode.
    I've set the Airport Extreme mode to 802.11n only - and all devices connect to the Airport Extreme as 802.11n Clients properly.
    But as soon as they connect to the Airport Express, they only work in 802.11b/g mode (although they are capable of n)
    and the connection is very slow - around 1Mb/s:
    http://imageshack.us/photo/my-images/804/bildschirmfoto20111211u.png/
    Can i force the Airport Express station to accept only "n" connections to speed up my file tranfers?
    Thanks for any help!
    matt

    Where is the AirPort Express located in relation to the area that needs more wireless coverage?
    Ideally, it would be at a point that is about half the distance between the AirPort Extreme and the area that needs more wireless coverage....and....there would be no obstructions like walls and/or ceilings in the signal path....tough to do in most homes, so do the best that you can.
    Avoid placing the Express down low on the wall and use an extension cord to get it up as high as possible with a free look into the room.
    The Express will normally "extend" what it receives, but you could try the following to see if it helps:
    Temporarily, change the Wireless Mode setting on the AirPort Express to "Create a wireless network" and change the Radio Mode to "802.11n only".
    (You may have to hold down the option key on your Mac while you click on the Radio Mode selection box to see the "802.11n only" choice). Then change the Wireless Mode back to "Extend a wireless network" and Update.

  • Airport express can't extend wireless network

    Airport express(A1264) can't extend wireless network. It seems that Airport express can't find my home Wi-Fi network. Amber light is blinking, and AirPort Utility of MacBook also can't find Airport express.
    If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
    It was successful only once, but all failed after that.
    Is there solution for this problem?
    [My system]
    Time capsule 4th generation
    Airport express 1st generation (A1264)
    [Settings]
    Time capsule (ethernet connected)
    - Create a wireless network
    - 802.11a/n - 802.11b/g/n (Automatic)
    - 2.4GHz / 5GHz Channel (Autmatic)
    - WPA2 Personal
    Airport express
    - Extend a wireless network
    - WPA2 Personal
    - 2.4GHz Wi-Fi network name and Password is set up

    If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
    Sorry, I misunderstood what you wanted to do.
    Since you did tell us that you had the Express connected with an Ethernet cable, I assumed that was how you wanted to configure the Express.
    But I want to extend a wireless network (not using ethernet)
    Because Airport Express and Time Capsule cannot be connect via ethernet cable.
    Follow the same setup as above....and do not connect an Ethernet cable.
    Keep the Express near the Time Capsule for the setup. Once you have a green light, move the Express to a point that is about half way between the Time Capsule and area that needs more wireless coverage.
    If you reset the Express several times and try the setup several times without success, I think you have to suspect a defective Express.

  • Extending Wireless Network with Airport Express / DLink Wireless

    I have a DLink wireless router WBR-1310. I own two Airport Express 802.11n's. Can anyone help me out with how I can properly set-up an extended network with these products? All help is greatly appreciated.

    You would need one AirPort Express located near the D-Link router and connected to the D-Link with an ethernet cable. This Express would be configured to "create a wireless network" and "allow this network to be extended"
    If you have two areas that need more wireless coverage, you would locate an AirPort Express approximately 1/2 the distance between the "main" AirPort Express and the area that needs more wireless coverage.
    Then do the same with the second area that needs more coverage.
    Without knowing your room layout, I can't honestly tell you whether you need only one "extending" Express or more than that.
    It will help to remember that the "extend" setup works like the hub and spokes of a wheel. Your "main" Express connected to the D-Link would be the "hub". Each of the "extending" Express devices would be at the end of a spoke. The Express devices at the ends of the spokes communicate directly to the hub, not to another Express at the end of another spoke.
    So, to work well, hopefully your D-Link router and Express will be located in a central area of your home so the extending devices will work around the perimeter.
    I would recommend that you study Apple's support document on extending wireless networks before you make a final decision on what to do.
    http://support.apple.com/kb/HT4145
    Finally, consider if you can connect the two Express devices you have now back to the D-Link using ethernet cables. This would provide much better performance than a wireless only situation.

  • Extending wireless network with an aiport express

    I have a netgear wireless router set up in my house on the second floor, but my room being located on the first floor i get a poor signal so i bought an airport express to extend my network. i tried going through the aiport exress setup assistant but that wouldnt work, so i ended up hooking it to my netgear router on the second floor to set it up in airport admin utility and then brought it back down to the first floor. my itunes worked with the speakers for about.. ten seconds then stopped. and my signal is just as weak as before.. any suggestions?

    Unfortunately, it is simply not possible to use an Airport Express to wirelessly "extend" the wireless range of any model of Netgear wireless router. Netgear's wireless routers do not support Apple's implementation of a wireless distribution system (WDS), which is a necessary requirement for setting up an extended wireless network with the Airport Express. And no - it doesn't work the other way around either (Airport Express as base station, Netgear wireless router to "extend").
    It sounds like you did successfully configure your Airport Express to "join" your existing wireless network - which will allow you to print and stream iTunes to the Airport Express. The problems you are having with Airtunes "hanging" on your Mac are almost certainly due to the poor wireless signal quality problem that you are already aware of.

  • Extending wireless network - airport express

    Hi - just unwrapped my new airport express and trying to set-up an extended wireless network.  My understanding is that the AX will extend my existing network, but I am getting the same error each time I try - amber status on extended network.  Does the extended network function not work if the existing router is non apple ?  I have a talk talk router and I can join a wireless network no issue.  However the point of buying the AX was to extend the network as I get bad reception on the back of the house.
    thanks

    Does the extended network function not work if the existing router is non apple ?
    Apple uses proprietary technology in their "extend" feature that.....as far as we know.....will only work with another Apple router.....if you are trying to "extend" using wireless only.
    It would be extremely unlikely that it would work with a router from another manufacturer for this purpose.

  • Extend wireless network with Airport Extreme n and Airport Express g

    I have a 4th generation Airport Exteme (n) and an older Airport Express (g) and would like to use the Airport Express to extend my network to the other end of my house, where the signal is very weak. When I tried to set it up tonight, my Airport Extreme disappeared all together and I had to do a hard reset to get it back. I am using a macbook pro 2.4 GHz Intel Core 2 Duo running OS X 10.7.2.  Are there any current insturctions to do this?

    Here's a Youtube video of how to do it. http://www.youtube.com/watch?v=e3EdbRfX1_w
    I had the same set up you do. I did not have success with the Express g. And in my case I had much better success when I sold the Express g on ebay, bought an Express N from the refurb store, so it only cost around $20 get something that is much more reliable.
    I quickly tried to find an Apple Support tech note for you but didn't, post back if you need more.

Maybe you are looking for