EXS24 Parameter Window

Hi,
This might seem like a really simple question. But I cannot figure out how to access the EXS24 parameter window. Not the simple window that you can access by clicking the box over the volume and pan but the more complicated one that allows you to completely manipulate the instrument.
I've searched everywhere on how to get to it but cannot find anything. The only things I find mention how to access options inside of that window.
Your help would be greatly appreciated and please don't post a link of a google search, I've searched for hours.
Thanks Chris

On the top right hand corner are 2 buttons - Edit and Options. Click on Edit.
You mention a "simple window that can access by clicking the box over the volume and pan". That sounds like the right one to me, but I don't know if I'd call it simple. It gives you direct access to all the samples used in the instrument where you can assign them to zones and groups, edit pitch, velocity, panning etc.
I'm not sure what else you want to manipulate, but the edit box will do everything you need from a sample player. If you want to mangle the samples you'll need to do that elsewhere. Then you can re-import back into EXS24 and create a new instrument.

Similar Messages

How to Print List to spool but skip the print parameter window?

Dear all,
I am coding a program for print list into spool.
But every times I run the program there must pop up a print parameter window, after I click the 'Continue' button,then the list print to spool.
Is there some way that I can just run the program and print to spool directly?
                           Thank you for your kindness help~~~
Message was edited by: jin yan

Hi,
If it is a report program then, use this code.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LP01'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT rep... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = 'X'
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

Data Format in Cross Tab and Parameter window about numeric and date

Hello,
I got a problem to show Year 2008 as 2,008.00, it's rediculous...
My PC and Notebook both show "2008", but my three co-workers' PCs all show "2,008.00"
the group field is: CStr(Year({SJ_Inv;1.TaxDate}))+ ' Sales Analysis'
How to convert such a numeric into text without decimal? CStr looks not workable.
also,
the numeric var in parameter window, sometimes I don't want it to show up comma and decimal, how to format it?
And, the datetime var in parameter window from store procedure, can it be a "Date" without Time for user to entry only?
I will be very appreciate for your helping.
~Michelle

Hi, Raghavendra,
The reason to use stored procedure is to save server room -- limited data for output; this is why we declare variable in Store procedure, and got problem there -- datetime but not date.
On the other hand, if we declare variable in Crystal report, it's allowed date type, but how to defaut the Date-from as 1st day of current month, and Date-to as Today in Crystal Report parameter setup ?? And then how to pass the parameter to store procedure to limit the data output volume?
(I am also trying to get this done in Store procedure right now..)
The pros and cons exist in Store procedure and Crystal report, which is better is not definite!
Best regards,

Customize the design of the parameter window

Hi,
My manager asked me something and I want to be sure of the answer.
I want to know if I can customize the design of the parameter window in Crystal Report XI or the only way to do that it's to create a .Net application and call the report by it.
Regards,
Hugo

Hi Hugo
Following are the answers for your queries:
Can we modify the size of the parameter window
-No
Can we modify the background color of the parameter window
-No
Can I create a string parameter and have the calendar with this parameter in the window ?
-With a string datatype paramter we cannot have the calendar window.
When I create a parameter for exemple BeginDate when the window appear at the right I always have @BeginDate can I hide this label ?
-Go to Field Explorer->parameter and rename the paramter by removing the '@' sign.
Please let us know if you need any further information.
Regards
Ashwini Yadav

IE 11 not displaying report parameter window

We have noticed that IE 11 is not displaying the input parameter window where user inputs their parameters like date ranges or other parameters. While parameter windows shows up in firefox.
We are using crystal reports 2011 on tomcat 7 production servers.
Does someone have a fix for that or any input on what can I do to fix the problem?
Thank you.

Update to SP 13:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
And for "SAP Crystal Reports, developer version for Microsoft Visual Studio", post your queries here:
SAP Crystal Reports, version for Visual Studio
Many thanks,
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Parameter window options

I am currently using CR11 R2 in my application. Though we integrated CR in our application , we still use crystal parameter dialog box to pass parameter to the report. In previous version there was a: "CANCEL" button, if the user decides not to view the report, but in CR11.5 R2 and CR12, we are not seeing this cancel option. Now even though user doesn't want to see a report he has to fill out all parameters field.
The interesting thing is this "CANCEL" option is available in parameter window , when we want to refresh a report from preview window. How do we get this "CANCEL" option in first place? Is there a setting ? Please help.

Hi,
This is a known issue and is tracked under the following defect IDs: ADAPT01267543,
It appears this was fixed in the following versions
XIR2 SP6
XIR3.1 SP3
Hope this helps.
Jonathan

Auto-hide of the ssrs parameter window after input

Hi,
Can we do the auto hide of parameter window in ssrs as soon as user select the input and click on view report and once the data comes, that parameter window should hide automatically.
Thanks
prashant

Prashant - No I do not think this is possible (At-least not dynamically) however there some design-time options that you can possibly try. Refer these information sources:
http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx
http://stackoverflow.com/questions/3636905/how-can-you-hide-unhide-reporting-services-report-parameters-via-url-query-strin
HTH
Good Luck! Please Mark This As Answer if it solved your issue. Please Vote This As Helpful if it helps to solve your issue

Parameter window question

Hi,
I would like to know if there ia any way to display more then 3 parameters per page in the parameter window in Discoverer Desktop 10.1.2.2. I would like to display all 4 paramteres of my worksheet on the same page, without having to press "Next" to enter the value for the 4th.
Is there a way to do this?
Thank you,
Gabi

Hi Gabi
No, sorry this cannot be done. This window that you see in Desktop is a fixed window and cannot be modified or adjusted. It will only display 3 parameters per screen as you have aleady found out.
Best wishes
Michael

How to close parameter window when report is running

When i use call report in form,at first a parameter window pop up,list parameter from form,then click run,the report is rinning.HOW to skip this parameter window?Use function Add_Parameter()?How to use it?

Hi,
Use Add_Parameter while you are calling the report from forms and the example is as foolows.
Pl_Id := Get_parameter_List('Rep_Parm');
If Not Id_Null(Pl_id) Then
Destroy_Parameter_List('Rep_Parm');
End If;
Pl_Id := Create_Parameter_List('Rep_Parm');
Add_Parameter
(Pl_Id,'PARAMFORM',Text_Parameter,'NO');
Run_Product(REPORTS,'UserRep.Rep',SYNCHRONOUS,RunTime,FileSystem,Pl_Id);
Pass ParForm as no then it will not display the parameter form.
regards
gaurav
null

EXS24 Editor Window Freezing

Hi
Just got a new mac with Logic Express 8.0.1.
Whenever I load a sample in the the EXS24 sampler and go to 'Groups' in the edit window, it stops responding.
Anyone else having this problem? Anyone know what is causing this?
Many Thanks

When files are opened (or an editor/designer is invoked), it's always associated with project hierarchy and project item. If you have an actual file, and you do something like "DTE.ItemOperations.OpenFile", if the file is in a project, it's opened
with that projects hierarchyinterface and item id. In all other instances, the file gets opened in the miscellaneous project (which is usually hidden in the solution explorer).
Note, there's an option in the Tools.Options dialog to turn it on.
But that's probably neither here nor there. From what you describe, (launching an editor from a toolwindow), you'll most likely need to have your toolwindow implement a minimal IVsHierarchy implementation, so as to provide the IVsHierarchy, itemID, and an
IVsHierarchy.GetProperty implementation (among others).
Then use IVsUIShellOpenDocument::OpenSpecificEditor or similar to launch your editor.
Sincerely,
Ed Dore

Exs24 edit window not opening

I've checked the advanced tools and audio options within preferences to get the edit button to show up. However, when I click on the edit button, it lights red to register the click but the windows to drag in my own samples doesn't appear?!
Ay ideas?!

Yours doesn't look like this?
If not make sure Preferences:Advanced:Show Advanced Tools is checked, as well as Additional Options:Audio

Parameter window not getting opened

Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!

997274 wrote:
Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!Do you have any invalid objects in the database?
Please generate the form via adadmin or manually and check then.
Thanks,
Hussein

Printing sap script to spool by skipping print parameter window

Hi all,
I am trying to print an output (derived from sap script) directly from program to spool and then fetch the spool request and download it to PDF. This should happen automatically when the end user executes the program by giving required inputs. Can any one guide me on this ?
Rgds,
Praveen

Hi all,
I got the problem solved. Thanks for all who replied and supported me. This is how i solved it. This is not the full code. I am not giving declaration part here. But this is the main blocks which is going to work.
Data: purdocno TYPE string,
                    v_len_in TYPE i.
PERFORM open_from.
    LOOP AT it_itab.
      ON CHANGE OF it_itab-ebeln.
          PERFORM start_form.
          PERFORM write_form.
          PERFORM end_form.
      END ON.
    ENDLOOP.
PERFORM close_form.
PERFORM convpdf.
FORM convpdf.
    CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
       format                      = 'PDF'
*       MAX_LINEWIDTH               = 132
*       ARCHIVE_INDEX               = ' '
*       COPYNUMBER                  = 0
*       ASCII_BIDI_VIS2LOG          = ' '
       PDF_DELETE_OTFTAB           = 'X'
     IMPORTING
       BIN_FILESIZE                = v_len_in
*       BIN_FILE                    =
      TABLES
        otf                         = i_otf
        lines                       = i_pdf
     EXCEPTIONS
       ERR_MAX_LINEWIDTH           = 1
       ERR_FORMAT                  = 2
       ERR_CONV_NOT_POSSIBLE       = 3
       ERR_BAD_OTF                 = 4
       OTHERS                      = 5.
    purdocno = s_ebeln+3(10).
    concatenate 'c:\' purdocno '.pdf' INTO purdocno.
    CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
*      BIN_FILESIZE                    =
      filename                        = purdocno
      FILETYPE                        = 'BIN' " important
*    IMPORTING
*      FILELENGTH                      =
     tables
       data_tab                        = i_pdf
     EXCEPTIONS
       FILE_WRITE_ERROR                = 1
       NO_BATCH                        = 2
       GUI_REFUSE_FILETRANSFER         = 3
       INVALID_TYPE                    = 4
       NO_AUTHORITY                    = 5
       UNKNOWN_ERROR                   = 6
       HEADER_NOT_ALLOWED              = 7
       SEPARATOR_NOT_ALLOWED           = 8
       FILESIZE_NOT_ALLOWED            = 9
       HEADER_TOO_LONG                 = 10
       DP_ERROR_CREATE                 = 11
       DP_ERROR_SEND                   = 12
       DP_ERROR_WRITE                  = 13
       UNKNOWN_DP_ERROR                = 14
       ACCESS_DENIED                   = 15
       DP_OUT_OF_MEMORY                = 16
       DISK_FULL                       = 17
       DP_TIMEOUT                      = 18
       FILE_NOT_FOUND                  = 19
       DATAPROVIDER_EXCEPTION          = 20
       CONTROL_FLUSH_ERROR             = 21
     OTHERS                            = 22.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.

Setting/Getting Parameter Values BEFORE and AFTER the param window loads

Hi there. My name is William Sanchez. I posted this question on Brian Wheadon's blog because I'm not sure that what we're trying to accomplish can be currently done with 2008 Crystal Report Viewer and was wondering if a future version will support this, or if we're just missing something. I've searched through the SDK and API and can't seem to find a solution. Here's what we're trying to accomplish
In a nutsheel: we think we need to hook into Crystal Report Viewer's parameter window from our WPF app.
What we need to do is to be able to pass a set of default values to our parameters AND, after that's done programmatically, still display the parameter window for the report. Currently, however, after you do:
parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
it's as if Crystal says: Ok, we got the value, there's no need to show the parameter window anymore. This makes sense, but we need to still be able to show the parameter window to the user because all we did (from our point of view) is to pass in a default "choice". If we were to call ApplyDefaultValues() instead, the actual choices for the parameter are overriden. We basically want to make a default choice for the user from the allowed values for that parameter. But we want to still present the parameter window with the default choice already selected, plus all the other choices available for that parameter. If the crystal report has parameter1 set to false as default, we might want to programmatically set it to true, but still show false as an option on the parameter window.
Part 2 of what we'd like to accomplish is that after the user changes any of the parameter values, and clicks OK to view the report, we'd like to catch the new parameter values in code to do something with them.
This is why we're thinking of hooking into the parameter window so that we can tell it what we want both BEFORE it loads and AFTER the user is done...just like we can hook into the CrystalReportViewer refresh button like this:
CrystalReportsViewer.ReportRefresh += new CrystalDecisions.Windows.Forms.RefreshEventHandler(CrystalReportsViewer_ReportRefresh);
Our app is a WPF C# .NET 3.5 desktop application. Any assistance or direction will surely be appreciated.
Kinds Regards,
William Sanchez
Edited by: wsanchez78 on Mar 31, 2010 1:20 AM

Good day Ted, thanks for your reply.
I did try Parameter.Default value, but what it does is as I mentioned above. If I have Parameter1 as a boolean, with possible values of true and false, if I set Paramter1.Default = true, the parameter window does come up, but it removed the false option from the drop down. So this is not a way to pick one of the various values for Parameter1, but to default it to only one of the values. It's close to what we need, but not fully.
Also, what are your thoughts about getting the parameter values after the user has made their changes to the CrystalReportViewer parameter window and click OK to pass them to the report. How can we programmatically get those new values?

Crystal report parameter problem while uploading in sap business one

Hi
All
I designed a crystal report using
stored procedure
and
Routemas user defined table
in sql server with three parameter
routname,from date,to date
these parameters are from storedprocedure only but not created in report
i set the parameter routename as dynamic and i assigned the routename field from routemas table
when i run the report in the parameter window it displays the list of routenames
upto this is k but
when i upload this report in sap business one 8.81 PL-05 and
run this report in sap environment First it asks parameters there
it didnt display the list of routnames
when the parameter routname is set as static and assign some routenames manually
then it shows the list in sap environment
Can any suggest the answer
Edited by: madhu ganga raju on Oct 17, 2011 7:06 AM

Hi Rhaul,
i don't exactly know why this is a problem, but if your not on latest (881 p10) then upgrade and try again.
Or as a workaround,
try saveing from CR to SAP with the CR add-on. That usualy works better then the import.
Regards,
D

EXS24 Parameter Window

Similar Messages

Maybe you are looking for