Parameter window options

I am currently using CR11 R2 in my application. Though we integrated CR in our application , we still use crystal parameter dialog box to pass parameter to the report. In previous version there was a: "CANCEL" button, if the user decides not to view the report, but in CR11.5 R2 and CR12, we are not seeing this cancel option. Now even though user doesn't want to see a report he has to fill out all parameters field.
The interesting thing is this "CANCEL" option is available in parameter window , when we want to refresh a report from preview window. How do we get this "CANCEL" option in first place? Is there a setting ? Please help.

Hi,
This is a known issue and is tracked under the following defect IDs: ADAPT01267543,
It appears this was fixed in the following versions
XIR2 SP6
XIR3.1 SP3
Hope this helps.
Jonathan

Similar Messages

How to set the parameter selection *optional* for each subreport?

Hi,
I am using Crystal Reprots 11.
I create 10 subreports, and each subreport contains a Parameters Field.
The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values for all 10 subreports.
For example, if I only select parameter values for subreport1 and click "OK", 9 error messages on the "Edit Values" window come out above the selection list box of every other subreports (i.e. subreport2 ~ subreport10) showing that: 'The value is not valid'.
Sometimes, I just want to review some specific subreports but not all.
How should I do to set the parameter selection optional (not mandatory) for each subreport?
Thank you in adavance.
Edited by: Holdup on Feb 17, 2012 3:44 PM

Hi,
Here's how you can make the prompts optional (Assuming you're using CR 2008 or higher):
1) Go into each subreport
2) You should see the parameter in the Field Explorer. Right-click the name and select Edit > Look for an option called 'Optional Prompt'. Set it to true
3) If you have a record selection in the subreport, then you need to modify the selection formula to something like this:
if not(hasvalue({?Parameter_Name})) then True else = {?Parameter_Name}
Hope this helps!
-Abhilash

EXS24 Parameter Window

Hi,
This might seem like a really simple question. But I cannot figure out how to access the EXS24 parameter window. Not the simple window that you can access by clicking the box over the volume and pan but the more complicated one that allows you to completely manipulate the instrument.
I've searched everywhere on how to get to it but cannot find anything. The only things I find mention how to access options inside of that window.
Your help would be greatly appreciated and please don't post a link of a google search, I've searched for hours.
Thanks Chris

On the top right hand corner are 2 buttons - Edit and Options. Click on Edit.
You mention a "simple window that can access by clicking the box over the volume and pan". That sounds like the right one to me, but I don't know if I'd call it simple. It gives you direct access to all the samples used in the instrument where you can assign them to zones and groups, edit pitch, velocity, panning etc.
I'm not sure what else you want to manipulate, but the edit box will do everything you need from a sample player. If you want to mangle the samples you'll need to do that elsewhere. Then you can re-import back into EXS24 and create a new instrument.

Auto-hide of the ssrs parameter window after input

Hi,
Can we do the auto hide of parameter window in ssrs as soon as user select the input and click on view report and once the data comes, that parameter window should hide automatically.
Thanks
prashant

Prashant - No I do not think this is possible (At-least not dynamically) however there some design-time options that you can possibly try. Refer these information sources:
http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx
http://stackoverflow.com/questions/3636905/how-can-you-hide-unhide-reporting-services-report-parameters-via-url-query-strin
HTH
Good Luck! Please Mark This As Answer if it solved your issue. Please Vote This As Helpful if it helps to solve your issue

Open Link in New Window Option Not Working in Top Link Bar

Hello,
We have a 'Popular Links' section in our Top Link Bar for our intranet site that contains a list of frequently used links. Since most of these links navigate to sites outside of SharePoint, we would like these to open in a new tab or window when clicked.
I've enabled the 'Open Link in New Window' option under Site Navigation Settings for each link, however when a user clicks the links that have had this option enabled the content is still loaded in the current tab.
Is this the correct set of steps to enable this content, or is there a better way to accomplish this that actually works?
**SharePoint Server Publishing Infrastructure has been activated.

You can try deactivating Minimal Download Strategy feature present under "Manage Site Features"....

How to Print List to spool but skip the print parameter window?

Dear all,
I am coding a program for print list into spool.
But every times I run the program there must pop up a print parameter window, after I click the 'Continue' button,then the list print to spool.
Is there some way that I can just run the program and print to spool directly?
                           Thank you for your kindness help~~~
Message was edited by: jin yan

Hi,
If it is a report program then, use this code.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LP01'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT rep... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = 'X'
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

Mac OS 10.9 Maverick -- no "open in new window" option

Upgraded to the new Mac 10.9 Maverick and now there are no "open folder in new window" option, or at least it doesn't work. Please advise. Thanks!

What doesn't work? Please explain what it does.
If I right-click on a folder, then hold down Option, I can choose Open folder in New Window, and that does happen.
If you hold down command and double-click, it will open in a new Tab instead of opening the folder in the same window.
With more than a single tab,
If you hold down cmd-opt and double-click, it will open the folder in a new window.
Without other tabs, it closes the original window just like holding down Option.

Display in PDF Browser Window option

Hi,
I'm using Adobe Reader version 8.1.2, We deploayed the software to a number of users using the adobe customization wizard to disable the "Display PDF in Browser Window Option"
We now want to enable this option for a few users that require the option ticked so they can view a pdf from a certain website.
I have tried deleting the bBrowserIntegration in HKLM\Software\Policies\Adobe\Adobe Reader
\8.0\FeatureLockDown
This enables the option to be modified but once I tick the box and close and re-open adobe reader it does not remember that I have ticked it.
Without re-installing adobe does anybody have any ideas what other reg keys could need to be modified.
Thanks,
James

We also deployed 8.12 to over 1000 users with the "Disable PDF in browser" option checked using the customization wizard. Now we're finding some users need it to view certain PDFs in a web-based application.
We would like to add the option, but removing the registry key doesn't actually install the option when you check it. It seems you might have to create a new mst then redeploy. We'd really like to not have to do that, if at all possible.
In the Reader archives, one guy suggested running this:
msiexec /i Adobe_Reader_8.1_MUI.msi ADDLOCAL=ReaderBrowserIntegration
I haven't tried that yet. Any feedback or other suggestions?
E Long
Austin, TX

Can't install the drives keep getting C:\WINDOWS\OPTIONS\INSTALL

I keep getting C:\WINDOWS\OPTIONS\INSTALL when I'm trying to install instant webcam I press ok and nothing happensit saysthe vfwwdm.drv' on (Unknown) is needed type the path where the file is located,and then click ok copyes files C:\WINDOWS\OPTIONS\INSTALL then browse?

i'm on windows millenium

Restore windows is the headline.the application "finder" unexpectedly quit while trying to restore its windows.do you want to restore its windows again? i clicked restore windows option which is showed on the monitor and jumping repeatedly .pleas solve it

restore windows is the headline.the application "finder" unexpectedly quit while trying to restore its windows.do you want to restore its windows again?this message showing on monitor. i clicked restore windows option which is showed on the monitor and jumping repeatedly .please tell me how can i solve it?

Selecting the "No" button will tell Finder not to try and reopen the windows.

Page breaks and 'Fit Page in Window' option

This may seem a stupid question but indulge me: when I add a page break InDesign is only showing me the very top of the text frame on the page the cursor has moved to. How do I get InDesign to honour the 'Fit Page to Window' option when I add page breaks? Do I really have to keep hitting command-0?

It does like to go exactly to the first line of the next page. It's not very intuitive.
However, you can hold down Alt and scroll the page up.
Or while holding alt - click and hold anywhere on the page. It will zoom out. Move the red box where you want to Zoom to, then release the mouse.
Or you could press Return a few times then delete the returns.

Remove Private Window Option in Safari MacBookPro

Remove Private Window Option in Safari MacBookPro
Hello there,
I am trying to remove the Private Window Option in my Safari MBP Version: 10.10.3. I have found the following guide below, but I could not find the "MainMenu.nib" file. Is there a way to find this? Or is it possible to remove the Private Window option at all by not doing the below steps? Thank you!
Disabiling for Safari:
The following steps will disable private browsing on all accounts. Taken from: http://guides.macrumors.com/Safari#Disable_Private_Browsing (Note: you must have the Xcode tools installed - can get from App store):
Control or right-click on the Safari icon in Finder and choose Show Package Contents.
In the window that appears, navigate to Contents/Resources/English.lproj/ and double click on the MainMenu.nib file. (I cannot locate this file)
In Interface Builder (From Xcode,) select the window showing the Safari menu bar.
Select the Safari menu, then select the private browsing item and press delete.
Type command-S to save the changes, then close Interface Builder and restart Safari.
This removes the Private Browsing menu option, effectively disabling private browsing.

There were some means of customizing Safari through OnyX, a utility interface tool that
can be used to perform a variety of changes in OS X and a few of them could mess it up.
You can modify hidden features in the OS X by use of OnyX, instead of attempting to
perform some modification by command-line or Terminal; although the Man access
also appears there, too.
•Titanium Software - Home: (see OnyX)
http://www.titanium.free.fr/
A few command-line or terminal methods of changing how OS X works may be ill-advised
to attempt without learning more about how all of that works and also how to understand
the background system that changes when you mess with it. The GUI is the top layer.
Did you look into the Developer settings for Safari to see if that will change your windowed
options, without any external or deeper access to attempts to alter Private window view?
For me, I've not used Safari all that much, and not as default main browser in any of my Macs.
Good luck & happy computing!

After deleting Win at partition 3, there is still Windows option at startup

I bought an SSD, and hooked it with my old hdd to my system. There was a Mac and Win partition in my older drive. I erased system files, but couldn't formatted it because it has important info.
Now at startup, i managed to erase second Mac option and second Recovery option, but there is still a second Windows option, which linked to nothing.
My question is, how can i delete that obsolete option at startup? Is there anyway i can manually arrange that screen?

I'm talking about the screen when starting up the computer and pressing alt button. there has to be 3 options, mac, windows and recovery. instead there is 4th setting named windows, if i hit it, black screen and a blinking cursor appears and nothing happens. because i uninstalled that windows, but instead of formatting that partition, i just deleted windows files, because i have important info in that drive.
now, i want to delete that obsolete windows option at startup menu.

Data Format in Cross Tab and Parameter window about numeric and date

Hello,
I got a problem to show Year 2008 as 2,008.00, it's rediculous...
My PC and Notebook both show "2008", but my three co-workers' PCs all show "2,008.00"
the group field is: CStr(Year({SJ_Inv;1.TaxDate}))+ ' Sales Analysis'
How to convert such a numeric into text without decimal? CStr looks not workable.
also,
the numeric var in parameter window, sometimes I don't want it to show up comma and decimal, how to format it?
And, the datetime var in parameter window from store procedure, can it be a "Date" without Time for user to entry only?
I will be very appreciate for your helping.
~Michelle

Hi, Raghavendra,
The reason to use stored procedure is to save server room -- limited data for output; this is why we declare variable in Store procedure, and got problem there -- datetime but not date.
On the other hand, if we declare variable in Crystal report, it's allowed date type, but how to defaut the Date-from as 1st day of current month, and Date-to as Today in Crystal Report parameter setup ?? And then how to pass the parameter to store procedure to limit the data output volume?
(I am also trying to get this done in Store procedure right now..)
The pros and cons exist in Store procedure and Crystal report, which is better is not definite!
Best regards,

Can I chnge the context menu "open in new tab / window" options back to the previous version (reverse order)?

In Firefox 4, the context menu "open in new tab / open in new window" options are in reverse order compared to 3.6. Can this be "fixed," i.e. change the menu item order? I use this feature constantly and it's a matter of habit, also still use some 3.6 machines.

You can use the Menu Editor extension to re-arrange the menus - https://addons.mozilla.org/firefox/addon/menu-editor

Parameter window options

Similar Messages

Maybe you are looking for