Extend the Customer Master one Division to other Division
If we extend the Customer Master (XD01) One Division to Other Division then system not copies the addition customer data (Customer Groups) and Employee respons field.
How can copy the field?
Regards,
Devendra
Hi,
When you are extending the Customer master from One division to another division, Only General data will be copied
Remaining all other data should be manually changed or edited.
hope it is clear,
regards,
santosh
Similar Messages
-
Populate all address fields to the customer master (DEBMAS06) IDOC
Hi All,
We have requirement to extend the customer master IDOC 'DEBMAS06' to add the address fields i.e (ADRC-STR_SUPPL3,STR_SUPPL4,STR_SUPPL5). Can any one tell me the suitable EXITs or BADI's to populate these fields street3, street4 and stree5 to the customer master. Otherwise can any one tell me how to over come this problem.
Thanks in advance
K N CDear Matthias,
I only can confirm the following statements (regarding information from development department):
- it is not possible with GuiXT
- it is not possible via a transaktion variant
- there exists no screenvariant with this functionality
-> modification is the only possibility.
Regards,
Andreas -
Extending the customer to another division
I am new to SD.....My client requirement is according to the division they select in sales order they should automatically get the payment terms...for one customer....
I got the solution that by extending the customer to another division we can solve this......
but when trying to extend the customer in XD01..customer code 500001,sals org - 4000, dist channel -50 div - 00(this how the customer master now)
now i tried extending customer code 500001,sals org - 4000, dist channel -50 div - 05
Sales area 4000 50 05 is not defined for customers
Message no. F2644
Pls guide me...Dear pranav_23 ,
If you maintain the payment terms for respective customer it will be reflected in to the sales order.
Sales area 4000 50 05 is not defined for customers
Inorder to fix this issue you need to maintain the common divisions in the "OVR2" .
Please let me know if you have any further clarifications
Thanks&Regards
Raghu.k -
How can i extend the customer to other sales area
how can i extend the customer to other sales area
Hello Harish,
Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
then save it.
Hope it is clear... -
Extending a customer into another company code and division
Hello Gurus,
I have created the following SP:
301000008
into this sales area:
ZV - Sales Organisation
99 - Distribution Channel
ZA - Retail.
I have copied this customer from an existing one.
Now I want to keep the same information about the customer but change the above into:
C-Code TCPS
ZV - Sales Organisation
99 - Distribution Channel
ZB - Whole sale
I can I do that?
Thanks
ChrisHi,
You can extend a customer using the T.code xd01.On the first half of the screen give the details of the company code,sales org,dist.channel and division u wish to extend the customer and the below give the details from which you wanted extend the customer from.
Regards,
Ramesh. -
Report for abserving changes made to the customer master and moniter
Report for abserving changes made to the customer master and moniter and detail
Please send with t. code.Hi Dhari,
Well the requirement seems very simple but its not as simple as it looks.
i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
1. pick up an cube that builds on emp transaction data.
2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
4. create a info object say indicator and add it to the cube
5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
4.now build one more cube for holding the changed records from this cube and call it say zhrchange
5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
hope this helps. -
How to define ABC class field in the Customer Master Sales tab
HI All,
can any one let me know how to define the new ABC class in the Customer Master Sales tab like below.
u2013 A (> 6,000,000 )
u2013 B (> 1,000,000u20136,000,000 )
u2013 C (> 100,000u20132,000,000 )
u2013 D (< 100,000 )
can any one let me know how to define and path in IMG.
Thanks in advance.
kumar reddy.In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
Try with following, based on your requirement:
MC(A
SIS: Customer,Inc.Orders - Selection
MC+A
SIS: Customer Returns, Selection
MC+E
SIS: Customer, Sales - Selection
MC+I
SIS: Customer Credit Memos - Selec.
Regards
JP -
"Vendor" field in the customer master - XD03
Hi,
I would like to know how useful the "vendor" field can be in the "control data" tab of the customer master (and vice versa with the vendor master).
Is this only for information only or can we use this information to consolidate open items for one particular vendor that is also a customer?
And how to do this if consolidation is possible?
Thanks,
RonanHello,
When a Customer is also a Vendor and decided to net of the transactions with each others account in order to offset the entries.
We need to get USD 100 from Customer A
We need to pay USD 50 to Vendor A
Ultimately, we need to get 50 from Customer A (Customer A and Vendor A is the same entity)
To do this, You need to create Customer A in the Vendor Master and Vendor A in the Customer Master.
You also need to check "Clear Customer with Vendor" check box in the master data.
This will result in customer items and vendor items cleared against each other.
Regards,
Ravi -
Custom program to download texts from the Customer master
Hi team,
I want to create a Functional specification for downloading texts from the Customer master.
Means we are trying to come up with a Zprogram development so that this program can be used later to download texts from the customer master.
Can any one advice me what are the steps to do this....and what procedure be followed to finish this task
Kindly advice from the Functional aspect
Regards,
saprules.Yes indeed.
This mass download functionality would be very interesting to share.
Thanks a lot!
Best regards,
Roel -
I am unable to upload the customer master data using BAPI.?
Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe -
Change history of the customer master
Hi Gurus, need help.
We have a customer requirement where a customer was assigned to multiple sales areas before, but the customer assignment to one of the sales areas is deleted.
Where is the place where we can see the relavant change history for the customer master.
regards,
KrishnaIn customer master data, choose environment from Menu bar then select Fields Changes.
There you will get info related to,
-All Changes
-Entries
-Deletions
-Field Names
Similarly for Account Changes, choose environment from Menu bar and select Account changes. And correspondingly based requirement go for All Fields or Senesitive Fields.
Hope it assist you.
Thanks & Regards
JP -
Workflow keying off changes in the customer master
I have created a workflow that triggers off of changes to a particular field in the customer master.
Everything works great.. However, users are requesting to see the old value as well as the newly changed value.
The event container doesn't seem to hold the previous changed value, only the new one.
It does have have the object key and the event time and date.The only option I see is to have my custom method go back and read the change doc table (cdhdr & cdpos) in and around the event time for the object key ( kna1) to retrieve the old value.
Any suggestions are appreciated.Hi,
The address data is always saved with the dates (look in table adrc). SO maybe you can retrack the original address.
Why do you print again an invoice. And if you do i think it is alright when it is sent to the current address and not to the old address.
Gr., Frank -
Goods receiving hours in the customer master.
Friends,
Can any one explain goods receiving hours in the customer master. what exactly this fields is used.
thanks
Devi reddyHi,
We define the possible goods receiving hours of your customers. With this function, you can plan the shipping activities so that the deliveries arrive by the desired deadline in the right city at the right time.
The goods receiving hours are copied by the System from the customer master record into the delivery header according to the unloading point and the delivery date.
Goto IMG -> Sales & Distribution -> Master Data -> Business Partner -> Customer ->Shipping ->Define Goods Receiving Hours.
Here you define the goods receing hours by 3 digit number, for example, Week days only or also on Satur days ect. use the same in customer master.
Hope this is clear.
thanks
Praveen -
Attachments to the Customer Master
Hi Guys,
We are attaching the documents to the Customer Master records in R/3.
Though we are able to see the same customers in CRM the attachments are not getting transferred.
What customizing objects do i need to load or what configuration settings do I need to make to see that the attachments get transferred to the CRM.
One more question is can i see the same attachments in the Mobile Sales and what steps do i need to make to see the attachments.Hey Guys,
Any 1 has idea regarding this issue -
How to find the Acoount Group used while creating the customer master data.
Hi,
I am in xd03 mode displaying the customer master data. I want to know the ACCOUNT GROUP which was used while create this customer. How can i find it? Can any one tell me the process to find the account group?
Thanks in advance.Enter the customer number in XD03 and click enter. Once the screen displays the customer name go to dropdown extras--> Administrative Data. This will give you the account group and the creation date of the customer. The same is stored in KNA1- KTOKD.
Thanks
Indranil
Maybe you are looking for
-
Flash sprite in Director: slow, slow!
It's not a new problem but maybe there's a new solution?... I have a Flash game in a Director projector. The Flash games works fine by itself (not embedded in Director), but inside Director, everything runs much slower. Is there any ways to speed thi
-
Error message: SyncUHandler.exe
When I connect my iPhone I receive this message: "iTunes could not back up because the back up could not be saved on the computer." Then, a dialoge box says this file is missing: libobjc.i138.a.dll, you may have to reinstall the application. Note tha
-
How to repeat std loop or call again the structure of BSEG at substitution
Hi Experts, I did a substitution for updating some values in the fields of Account docs while posting in MIRO, VF01 etc . The thing I did is, If i get the value say like Profit center in line item substitution, Im updating the same to next line item
-
I am trying to run a task in a package, however there is a problem come out, see any one meet this before ?
-
Is it possible to block a user on preinstalled "messages" app?
is it possible to block a user on preinstalled "messages" app?