Extending a customer into another company code and division

Hello Gurus,
I have created the following SP:
301000008
into this sales area:
ZV - Sales Organisation
99 - Distribution Channel
ZA - Retail.
I have copied this customer from an existing one.
Now I want to keep the same information about the customer but change the above into:
C-Code TCPS
ZV - Sales Organisation
99 - Distribution Channel
ZB - Whole sale
I can I do that?
Thanks
Chris

Hi,
You can extend a customer using the T.code xd01.On the first half of the screen give the details of the company code,sales org,dist.channel and division u wish to extend the customer and the below give the details from which you wanted extend the customer from.
Regards,
Ramesh.

Similar Messages

  • Extend customer to multiple company codes and mutliple sales organisations

    Hi,
    Customers with only general info. are getting created from CRM system to SAP ECC. Now we extend the same customer to differnt company codes and different sales organisations.
    When I checked the BADI, CUSTOMER ADDDATA, in this S_KNA1, S_KNB1, S_KNVV structures are there only. So is it possible to extend it to mutiple company codes at the same time.
    It is mostly appreciated for early response.
    Thanks,

    Hi,
    You can use fm SD_CUSTOMER_MAINTAIN_ALL to extend customer to sales are and company code.
    Using this fm you can maintain all customer master data.

  • Ur customer is another company code

    Hello Gurus,
    Please tell me how to create an invoice to see VPRS, where our customer is another company codes.

    Hi Friend,
    Here you can see the entire Procedure:
    1. Call up the transaction as follows:
        Transaction Code: VF04
        Menu Path: Logistics  Sales and Distribution  Billing  Billing Document     Process Billing Due List
    2. Enter the following data:
              a.     Billing date from
              b.     Billing date to
              c.     Sales organization
              d.     Delivery-related (in the Documents to be selected screen area)
    3. Choose  DisplayBillList.
    The system proposes all the deliveries due on the current date for the selected sales organization.
    Note that there could be more deliveries (from previous processes) ready for billing than you created in this process. If this is the case, simply deselect the deliveries that do not belong to your current IDES process.
    4. On the Process Billing Due List screen, choose .
    The system displays your group number.
    5. Place the cursor on the line with the group number and then choose Documents.
    You see the sales document created for your group.
    6. Note the billing document number in the SD doc. column.
    7. Position your cursor on the line containing your sales document, then choose  Display document.
    8. Select your position.
    9. Choose Go to  Header  Header.
    In the accounting data you see that the invoice is assigned to the company code 2200 (IDES France).
    10. Choose .
    11. On the Invoice ... (F2) Display: Overview of Billing Items screen, mark the item and choose  (in the lower area of the screen).
    12. On the Invoice... (F2) Display: Item Data screen, mark the condition PI01 and choose .
    You reach the Invoice ... (F2) display: Item Data screen.
    Condition PI01 is marked as statistic in the invoice for the end customer.
    13. Choose .
    14. On the Invoice... (F2) Display: Item Data screen, choose  Analysis.
    15. On the Condition determination analysis screen, scroll down until you can display the condition type VPRS Cost appears.
    16. Double click on the VPRS.
    The condition Cost (VPRS) is part of the pricing procedure. It has statistic character and shows the goods issue value in the invoice. In this case goods issue is posted in a different company code to that of the billing document, so the condition is ignored. The cost that is transferred to the Sales Information System and to Profitability Analysis is the condition value for the internal price, rather than your value.

  • Copy company code data  into another company code

    Hi SAP gurus,
    We are working on one rollout project. So our Functional consultants are copying The company code 7301 data into 7501 by using SPRO. But at the end It is giving following Error Message because of one Y-table .
    Message no. TK 092                                                                               
    Diagnosis                                                                               
    The object R3TR TABU YFI_CONT_NATURE is flagged as a Current setting,
         which means that it is not controlled by the Transport Organizer.                                                                               
    However, the attributes of object R3TR TABU TCK33 mean that it is    
         controlled by the Transport Organizer.                                                                               
    Any objects that you want to edit together in a single step must eithe
         all be controlled by the Transport Organizer, or none of them can be  controlled by the Transport organizer.                                                                               
    System Response                                                                               
    The funtion terminates.                                                                               
    Procedure                                                                               
    Edit the objects separately.             
              could you help what is the exact problem whether is there any issue with basis.
    Your help will be rewarded
    thanks
    Madhukar

    hi,
    please check the "delivery class" of your customer table! (F1) in transaction SE11
    [http://help.sap.com/saphelp_nw70/helpdata/de/6c/f2934259a5c66ae10000000a155106/frameset.htm]

  • Merging of plant into another company code

    Dear,
         We are planning to merge the plants of other company code into another.first company code will be blocked.can anyone tell me the steps to be taken into consideration from SD side .
    regards
    Chilukri

    Hello,
    Check the following link
    www.service.sap.com/slo
    Here you will find another link called "company code merge".There is a lot of information regarding other SLO services too.
    Regards,
    Sourabh
    Reward points if helpful.

  • Copy data from 1 company code to another company code

    hi friends
    my client has 3 company codes but now they want to close one company code for that they want to copy data from one company code to another company code after  copying the data they want to delete that company code
    i am fresher to sap(fico) please tell me the solution for this,
    1) what is the process of copy from one company code data to another
    2) what is rules and integrations for that

    Company Codes are the individual identity and we have to give accounting details (Balance Sheet and Profit and Loss account) to statutory bodies so deletion of Company code or coping data from one to another is not posible and not suggested too.
    Expalin your client to block all the transaction in one company code and transfer all the closing balance as per trail balance, open Purchase orders, open Sales orders, inventory valuation to another company code and start doing trasaction there.
    This is the only solution as per my knowledge.
    Uttam

  • Automatic creation of Company Code and Sales Area Data for Customer Master

    Hi,
    We have a organisation structure setup with multiple company codes and sales areas.
    A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
    Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
    I'm reluctant to use BDC's because of performance. We are in a Retail environment.
    Thanks in advance
    Craig

    The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
    The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

  • Extend Customer to Different Company code?

    Hi.
    How to extend Customer to Different Company code?
    ie, Cust1 is created with ABC company code, now i want to extend the same with XYZ company code.
    in same client.
    Reg,
    Antaa21

    Hi,
    In T.Code XD01 - Select relevant account group and enter new company code.
    Under reference option enter the existing customer number and sales org details click on continue button enter name and address details remaining information will be copied from existing customer and save.
    Thanks,
    Padmaja

  • Transfer asset from one company code and to another company code

    Hi Guru
    we have one issue in transfering of asset from one company code to another company code by tocde ABT1N as we get the error transaction type cannot be used for activity retmet from interco.transfer w/o rev to affil.co message no aapo176
    any appropriate method to do transfer and what is the settings we should take care for this
    kind regards
    sunitha
    Edited by: sunitha reddy on Sep 1, 2010 2:22 PM

    Hi Sunitha,
    You should also check the following customizing settings in case of AAPO176 in ABT1N:
    It could be that your transaction type that is mentioned in your error code AAPO176 cannot be used for 'Acquisition from intercompany transfer'.
    In this case check the default transaction types your customizing in Asset Accounting - Transactions - Specify Default Transaction Types.        
    Check if the same default transaction type for 'Acquisition from INTERcompany transfer' is also used for 'Acquisition from INTRAcompany transfer'.
    If not, then this is possibly the reason for the error AAPO176.       
    The transaction types for 'Acquisition from intercompany transfer' AND 'Acquisition from intracompany transfer' should be same as the standard transaction type 158 (please also review SAP note 196012). Both transaction types must be customized the same if you use your own customized transaction types...if one is different than the other, that would also be a reason for AAPO176 to be triggered.                                                                               
    I hope this information helps in addition.
    Kind regards,
    Brigitte

  • Creating Asset in one Company Code and transferring it into multiple ccodes

    Hi ,
    We want to create a asset in one company code and then want to transfer it to multiple company codes based on %.
    eg: Asset XYZ in Ccode 100 for $10000
      transferring it to multiple company codes 100  20%
                                                                  200  50%
                                                                  300 30%  
    At present we are using AS01 and then using ABT1N multiple times. Is there an alternative way for doing it.
    Best Regards,
    Venkatram

    You can also create a custom program which takes your excel file with all the new asset numbers in new company code and the partial amount and process t-code ABT1N in batch.. if your partial transfer list is huge. If you have few assets than manual approach is better.

  • Sales using plan from another company code

    Hello Gurus,
        will you please provide some detail about customizing " inter-company sales processing", mainly about how to get plant from another company code?
    thanks very much!

    Hi
    explaining you in brief, the basic requirments for intercompany sales is,
    Both the company codes should belong to the same company
    The material should be existing in both the company codes
    Configuration Settings :
    1. The material should be extended to the Ordering company and while extending the plant and storage location should be maintained same(that of Delivering)
    2. An Internal Customer should be created in the Delivering Company Code. Use the Delivering Company code and ordering sales area.
    3. In the path IMG - Sales and Distribution - Billing - Intercomapny Billing -
        1. Define Order types for Intercompany Billing - where you have to assign the Billing type IV to the sales Order types.
        2. Assign Organisational units by plant - where you have to assign the Delivering plant to the ordering sales area
       3.Define Internal Customer number by Sales Organisation - where you have to assign the Internal Customer number to the ordering sales organisation
    In addition to this you have to define the plant as the Delivering Plant by maintaining the assignment of plant to Sales Organisation and Distribution Channel (of Ordering in enterprise structure)
    Now you can create an order and in that you have to change the plant manually and save.
    Thanks,
    Ravi

  • Extend vendors to a new company code

    Hi,
    We are creating a new company code and I want  to know whether there is any standard transcation code to  mass create the vendors master from  the existing company code to the new company code without any BDC or LSMW.
    Thanks,
    SS

    Hi,
    Go to transaction XK99. Here you can extend vendors from one company code to another with below steps:-
    1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
    2. Their will be 2 tab. select the check for DO not change for existing data.
    3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
    4. Bottem of this tab you have to mention the FROM company code.
    5. Press F8 and save.
    With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
    Regards,
    Gaurav

  • Collection strategy: one customer in multiple company codes

    Hi,
    we look into CM at the moment and have the following requirement:
    There is one customer who has business with different companies (company codes).
    the collection for these kind of customer should be based on the customer across all companies and not within each.
    If customer ZZZ is in company code 1000, 2000 and 3000 and it would be necessary to have only one collection specialist on this customer across all companies.
    How would you do this?
    Thanks  + Regards
    Hein

    Hi,
    You can create a new collection segment containing all the required company codes and assign that segment to the customer profile to be used for this customer.  This would enable you to assign the same specialist and same collection strategy.  In your process receivables you will get the consolidated data for this customer.  However when you process it, you will get individual detailed receivable due for individual company codes.
    Regards,
    Ravi

  • Change Company Code and Sales Organization

    I have a group of records numbering about ~1K records that are in the wrong Company Code and Sales Organization. I can identifiy this group and put them in a flat file but they have account numbers that are not linear, by which I mean they aren't account numbers 1 to 1000. WITHOUT creating new customer mater records, how can I simply change the Company Code and Sales Organization code for these records? I've looked at the XD99 transaction but that seems to be limited to a range of accounts?

    Hi Mark
    It is not possible to change the Company Code and Sales Organisation of an Existing Customer.
    The only option is that you can Extend the same Customer to New Co. Code and Sales Org. by using XD01. You may use old customer as reference. Once you create the new Customer Master you may block the Old Customer master initially and later on Delete them or Archive them.
    Regards
    Amitesh Anand

  • Steps to define company code and its dependent entries for mm,pm

    Hi Experts,
    kindly share that how to define company code and its dependent assignments for PM & MM module

    Dear Hitendra
    Company code, Contolling area, Profit Center are Financials related fields and are mapped under FI Enterprise structure as its Org unit. Plant (Logistics Plant) is defined in MM. Related modules like PP, PM, SD extend this logistics plant in their repsective modules as Production Planning Plant, Production Plant, Maintenance Planning Plant, Maintenance Plant, Sales Plant etc.
    Company code is never defined in any logistics moudle , its in Financials where it is defined. It is then assigned to the Plant in logistics thru which the company code gets populated easily in respective modules.In contolling end, its controlling area that talks.
    IMG-->SAP Customizing Implementation Guide->Enterprise Structure-->Definition-->Financial Accounting-->Edit, Copy, Delete, Check Company Code
    This is a very broad upper level details for your query. Please search the SCN in relevant spaces for more information.
    Award points if the above explanation was useful...
    KR
    Murad Ahmed.

Maybe you are looking for