Extension to convert your code to the phAKT
Is there a tool that let me convert the sites made in phakt
to PHPMySQL Servermodel?
I have many sites in phakt and I can not use the new
dreamweaver.
Is there a tool that let me convert the sites made in phakt
to PHPMySQL Servermodel?
I have many sites in phakt and I can not use the new
dreamweaver.
Similar Messages
-
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Can you transfer movies from your DVD to the ipod?
Simple question. And if yes, how?
The short answer is: get a third-party converter program, convert your DVDs, add the converted files to your iTunes library, then sync to your iPod as usual.
I use the Cucu soft video suite, and have been very happy with it. Costs forty bucks (though you can get the standalone DVD converter for thirty), but it's easy to use, converts quickly and offers many user-controllable settings. There are many other retail products available, as well as lots of freeware and shareware options. Videora and Handbrake are two that I've seen mentioned here many times. -
Can i write some code in the Debugger
Dear,
Can we write some code at the time of debugging.
For ex. In Production my code is c = a + b.
now i want c = a - b.
<Modified subject line>
Moderator Message: Please use more descriptive subject lines in future.
Edited by: Suhas Saha on Nov 17, 2011 12:27 PMHi Anuj,
First, even I would like to stress the point mentioned above by Suhas. No matter how critical the issue is & even if you have these rights in Production, do NOT change the values in Production system. NOT RECOMMENDED AT ALL.
About your question of activating from the debugger:
The De-bugger only opens the source code in a New Window. Till you execute the existing code or activate it from the ABAP EDITOR, your code remains the same. As you are in Production you will have to trnasport the changes after activating the code with the changes.
Regards,
Pranav. -
Can you convert your desktop site plan into the phone & tablet version w/o re-creating the pages?
Can you convert your desktop site plan into the phone & tablet version without re-creating the landing pages? This seems too extensive to have to re-design each page?
Cwsnell,
On your nav bar there is a shorcut to other pages.
The most effecient way I have found to do this from the phone layout,
click on the page icon shown above
type in the name of the page (and select the desktop version as indicated by the icon of the monitor)
select all on that page (CTRL A / Command A) and copy (CTRL C / Command C)
revert back to the phone layout page and paste (CTRL V / Command V)
then resize, delete what you dont need, make any other edits and your done!
There is not a way to copy a page entirely over. The mobile version should have less information and less imagery to enable fast load times.
-SiteSpot -
I have taken the cfdump for tmpqry and it shows all data for
the range ( No error at this step ) . But when we exceute this
dbquery we get below mentioned error .
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
senerio:
I am using createobject to create a reference for component
and call MDArraySort function in the cfc and getting this error .
'The system has attempted to use an undefined value, which
usually indicates a programming error, either in your code or some
system code.
Null pointer is undefined.... '
i am using this code in a cfc file.
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
var tmpqry = Querynew(arguments.colNames);
var qRow = QueryAddRow(tmpqry, Arraylen(arguments.colArray)
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
sIndexinSensorIDs = colArray[qRowIndex]["SENSOR"]&"##";
Temp_readin_code =
colArray[qRowIndex]["READING_CODE"]&"##";
QuerySetCell(tmpqry, 'SENSOR', sIndexinSensorIDs,
qRowIndex);
QuerySetCell(tmpqry,
'TYPE',javacast('String',colArray[qRowIndex]["TYPE"]), qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(colArray[qRowIndex]["TIMESTAMP2"]), qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',javacast('String',colArray[qRowIndex]["ORDER_BY_PARAM"]),
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',Temp_readin_code ,
qRowIndex);
QuerySetCell(tmpqry,
'READING',javacast('String',colArray[qRowIndex]["READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',javacast('String',colArray[qRowIndex]["PK_READING"]),
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',javacast('String',colArray[qRowIndex]["ALARM_STATUS"]),
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
javacast('String',colArray[qRowIndex]["DURATION"]), qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',javacast('String',colArray[qRowIndex]["DESCRIPTION"]),
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
It is working fine for some date range and and getting above
mentioned error in sone situation .Hi All ,
Thank you for your support ,
Finally i have fix the issue using some changes in my
function in cfc .
<cffunction name="MDArraySort" Returntype="query"
access="public" >
<cfargument name="colArray" type="array"
required="true">
<cfargument name="colNames" type="string"
required="true">
<cfargument name="colSort" type="string"
required="true">
<cfargument name="sensorIDs" type="string"
required="true">
<cfscript>
//Declare variable collection used in function as local
--->
var tmpqry =
Querynew(arguments.colNames,"CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_DATE,CF_SQL_VARCHAR,CF_ SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR,CF_SQL_VARCHAR");
var qRow = QueryAddRow(tmpqry,
Arraylen(arguments.colArray));
</cfscript>
<cfloop from="1" to="#Arraylen(arguments.colArray)#"
index="qRowIndex">
<cfscript>
// Populate the query table
QuerySetCell(tmpqry, 'SENSOR',
colArray[qRowIndex]["SENSOR"], qRowIndex);
QuerySetCell(tmpqry,
'TYPE',arguments.colArray[qRowIndex]["TYPE"], qRowIndex);
QuerySetCell(tmpqry, 'TIMESTAMP2',
LSParseDateTime(arguments.colArray[qRowIndex]["TIMESTAMP2"]),
qRowIndex);
QuerySetCell(tmpqry,
'ORDER_BY_PARAM',arguments.colArray[qRowIndex]["ORDER_BY_PARAM"],
qRowIndex);
QuerySetCell(tmpqry, 'READING_CODE',
colArray[qRowIndex]["READING_CODE"] , qRowIndex);
QuerySetCell(tmpqry,
'READING',arguments.colArray[qRowIndex]["READING"], qRowIndex);
QuerySetCell(tmpqry,
'PK_READING',arguments.colArray[qRowIndex]["PK_READING"],
qRowIndex);
QuerySetCell(tmpqry,
'ALARM_STATUS',arguments.colArray[qRowIndex]["ALARM_STATUS"],
qRowIndex);
QuerySetCell(tmpqry, 'DURATION',
arguments.colArray[qRowIndex]["DURATION"], qRowIndex);
QuerySetCell(tmpqry,
'DESCRIPTION',arguments.colArray[qRowIndex]["DESCRIPTION"],
qRowIndex);
</cfscript>
</cfloop>
<cfquery name="qry" dbtype="query" >
SELECT *
FROM tmpqry
ORDER BY #arguments.colSort# ASC
</cfquery>
<cfreturn qry >
</cffunction>
Rajesh
SCMS
India -
How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!
It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.
-
I am trying to use Itunes to move my data from my iphone 4s that was backed up on my Macbook Pro. I keep getting an error code backing up from ITunes to new Iphone 5s:iTunes could not back up the iPhone “Karen’s iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be backed up. On the Iphone it keeps telling me to add another network. I have put our home network on the Iphone. When I put the passcode in the phone does not give me enough time to put my Apple ID password in and it shuts off. Help!
<Email Edited by Host>FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
How do you strip the "boilerplate" in your code?
Thanks to the help I've gotten here I'm actually starting to get the hang of this application so let me start by saying THANK YOU!
My question: Is there some way to strip all the boilerplate text in my code... you know the information that comes by default in a template? I know it's probably not necessary but I want my work to be as clean as possible.William Vondracek wrote:
I'm on a Mac if that makes a difference.
Yes, it does make a difference. I have just tested downloading it in Safari and Firefox on a MacBook Pro.
Safari, in Apple's infuriating way of thinking it knows best, automatically appends .xml to the filename. Firefox does not.
Even when I removed the .xml in Finder, Dreamweaver still couldn't open it, because Mac OS X again decided it knew better than me. Instead of actually removing the .xml extension, it simply hid it!
I needed to select the file in Finder and press Cmd-I to open Get Info, delete the .xml there, and deselect the option to hide the filename extension. Then it worked.
The file doesn't need to be saved in any particular location, but it must have the .dwr filename extension.
I'll add a note to the instructions on my site. Thanks for alerting me to this problem. -
having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online even if it wil be shipped within u.s. only?
To buy in for delivery in Qatar, you should be starting from the Apple Qatar site:
http://www.apple.com/qa/
Do you have an Apple-ID? if you do, then you should not have to enter your Address again, and may be able to sidestep the US Zip Code issue. -
I downloaded the new IOS 7 and it asked for a pass code to unlock it when it finished, however, I haven't used a pass code in so long, I don't remember what it is! I have tried all I have ever used and still no luck. Now my phone is disabled and I can't use my new operating system! Very disappointed!
Try to connect to a computer with your paired iphone, the run iTunes and Run Restore iPhone
-
Exist an easy way to convert base64 code in XML files into the original image file on forms
I've made a form in lifecycle that will be distributed by email as a pdf, and submitted back to me as an XML file and then that data imported into the pdf form template to view the data. Issue is I have an "attach image" field on the form and in XML it gets written to a base64 encoded format. Is there convenient way to extract this code from the XML file so that I would have a workable jpeg image file that I can save and open in other apps? Thank you in advance! -Robert Tampa
I tried to make John Brinkman's sample working in reverse.
This script will grab an image field's value and produce an attachment (png-file), which then can be saved to the hard drive.
//Get Base64 data of the image field
var b64Data = ImageField1.value.image.value;
//Convert to a read stream
var ReadStream = util.streamFromString(b64Data);
//Decode from Base64
var DecodedStream = Net.streamDecode(ReadStream, "base64");
//Attach an empty image file
event.target.createDataObject("MyExportImage.png", "", "image/png");
//Update attached image file with stream data
event.target.setDataObjectContents("MyExportImage.png", DecodedStream);
//Show attachment pane
event.target.viewState = {overViewMode:7};
This works so far, but the produced images are always cutted off.
No idea what's the reason for this behavior. -
Iphone has a message on it that said iphone is disable connect to itune. i try but it said that you must unlock your phone. but the iphone will not let me bring up the keypad so i can put the code in to unlock it, it has the message iphone disable connect to itune. what can i do?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery... -
What is the easiest method to convert your Outlook Mail from MS Office 2011 for Mac, into Apple Mail?
As best I can see from googling it, there is NO easy direct way with Apple's builtin tools. If you Google it you will find that many software companies are selling Apps specifically designed for this purpose. Good luck.
Hope this helps -
I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.
Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it
Maybe you are looking for
-
I don't know who the previous owner is or how to contact them because I can't see their email address. I spent $200 and just want my phone to work. Is there any way apple can help?
-
Can I change original source files in the project?
I have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequenc
-
Downgrade firmware of 4.2.1 2G Ipod Touch to 4.1?
I have an Ipod touch 2G on 4.2.1 firmware. How can I downgrade it to 4.1 firmware? I don't care if its legit or not, just as long as it works.
-
Monitoring nexus 5K using DCNM (linux platform)
Hi guys, since some time i installed on a linux server. (the server is shared with Netapp onCommand / DFM). nothing to say about installation and discovery of the nexus switches. they i read the manual to understand how to collect performance data...
-
Hi everybody this is physical standby ,i want to know one thing is that what is right purpose of this physical standby database, because i want to check that ,is the changes are made in primary database making the changes in standby database ? the st