Extensions Are Not Installed and Then Shown Again

Hi,
I am updating Jdeveloper 11.1.1.1.4 and there are 4 extensions that are not installed and show again every time:
Repository Harverster
AIA Service Constructor
AIA Composite Application Framework 2.4
Fusion Developer Guide update
The problem is much more in that this kind of issue with updates was in Jdeveloper since its beginning, than is the immediate need for this 4 extensions. Is there a reliable way to manage this issues? Why One should rely on a software with so basic and persistent problems?
Thanks in Advance
Fabio D'Alfonso
http://www.fabiodalfonso.com

Hi Fabio,
I'm sorry to hear that you're having troubles with these extensions. After looking at each of the extensions, it appears that they are being installed, but they are not placing a jar file into the /jdev/extensions folder which is what JDeveloper is looking for in order to determine if they are up to date or not.
I've filed a bug against each of the extensions.
This is not an issue with the larger IDE itself, or even the functionality of these 4 extensions actually. It's a bug in how these extensions are being packaged by their development team.
Thanks for pointing out the issue. We'll get it take care of as quickly as possible.
--jb                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Similar Messages

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • Extensions are not installing: Error code 1

    I have just installed Adobe Exchange panel, but can not install any extension. I get this error on Photoshop: “Installation failed with error code: 1. The zxp installer has been copied to your documents folder”. If I try to install from that folder on My Documents, Adobe Extension manager reports "The extension is not valid. Extension won't install” (I'm translating from Spanish).
    I have tried "free" and "Creative Cloud suscribers" extensions with no luck, from the Adobe Exchange panel and just by launching the extension packs: nothing works.
    My Extension manager version: 6.0.5.9 (Adobe Extension Manager CS6)
    OS: Windows 7, 64 bits (service pack 1)

    I can't install this extension with my account at present. Please generate log files using the steps below:
    1. Open Finder.
    2. Navigate to "Applications/Utilities".
    3. Double click "Terminal.app" to launch it.
    4. In the Terminal window, input the following command (including double quotation mark) then press "return" key.
        cd "/Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app/Contents/MacOS"
    5. Input the following command then press "return" key.
        sudo touch ExManLog.YES
    6. When being prompted, input the password of administrator user then press "return" key. A file named "ExManLog.YES" should have been created in this folder.
    7. Try to install extension.
    8. After installation failure, exit Extension Manager.
    9. Get log files from "/Users/<UserName>/Library/Application Support/Adobe/Extension Manager CS6/". Note that the folder "/Users/<UserName>/Library/" is hidden by default. You can open Finder, press "option" key when click menu item "Go"->"Library" to go into this folder.

  • Extensions are not installing properly...

    I am running Windows 7, 64 bit, Dreamweaver CS6 with latest updates, and for the life of me, can not get a single extension (thats right, none, zip, nada, nothing) installed an useable.
    I have run a few diagnostics, including complete reinstalls, clearing of cache, ensuring removal of all located Dreamweaver user configuration files, and still no luck.
    The extensions install with no error, but nothing shows in the menus.
    It looks like all the right files are coppied to the correct locations, but when the startup scripts are run to complete the process, nothing appears to happen, the scripts get deleted, and I am left with no change to the menu options.
    Any assistance would be greatly appreciated....
    Thanks in advance..

    Thanks for the responses guys.
    @Hans-g
    Yes, I am installing the extesnions correctly... The extensions have been checked and confirmed compatible with CS6, I have the latest verson of Dreamweaver CS6 Cloud (Includeding Extension Manager CS6), and all updates. Java is up to data, and so is windows. (Even reduced the security profile of Java for a test install to make sure.)
    @ Nacy O,
    Yes. UAC is completely disabled, and I have tried running as administrator, for the initial install, the upgrade to the latest versions, and the extension installs. I have also disabled antivirus, firewalls, and any other locally installed software that has the potential to get in the way, and many that dont for good measure.
    The install of the extensions succeeds, as in I can see the extension files in the dreamweaver configuration folder location, including the scripts to initialise them on startup of dreamweaver. However, when the startup scripts run, nothing else seems to happen... and the initialisation scripts simply disappear.

  • Photoshop CC indicates that support files necessary for operation are not installed, and to reinstall.

    However, I do not have the installer app (only the uninstaller). Anyone know what I should do?

    Go to the Creative Cloud desktop app, uninstall and then re-install.
    Benjamin

  • TS1368 My apps store apps are not installing the option comes again and again cannot connect to iTunes Store

    I Want to installed apps from apps store but their is come an option cannot connect to iTunes Store ??????what I do please remove this problem please

    Try:
    Can't connect to the iTunes Store
    This previous discussion:
    App Store Updates (but only Updates)...: Apple Support Communities

  • Updates are not installing and lost the cloud app

    I cannot download anything - says downloading, but I get nothing.  my cloud disappeared yesterday.  today I cannot save any files in InDesignCC  HELP.

    1) Uninstall Creative Cloud
    2) Go to Free Creative Cloud | Download Adobe Creative Cloud free trial and install again.
    3) Restart your computer after the installation and the problem will be fixed.
    I was on a phone couple minute ago with a tech support from Adobe and by doing those steps the problem was fixed.

  • Upgrade to Windows Server 2008 installation fails (reports Services to uninstall but they are not installed)

    I am upgrading a Windows Server 2003 to 2008.
    When I run the install it completes the Compability check and reports that Sharepoint Services and WSUS are installed. They are not installed and are not running Services either. I have attempted to remove Registry keys for these but this does not resolve
    my issue.
    Control Panel, Add/Remove does not report these as installed either. 
    How do I get the 2008 install to continue and ignore these OR how do I "truly" get these "uninstalled" if there is nothing I can do to find out what is reporting that they are installed?

    SBS 2003 does contain these feature by default. Is this a small business server OS?  If so I'd try them over here.
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sbsserver&filter=alltypes&sort=lastpostdesc
     This one may also help.
    Transition from Small Business Server to Standard Windows Server
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

    '"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
    I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
    Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
    Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

    It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
    Lion is also affected but not as badly.
    7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
    Obviously that is not a solution for a later Gen5 TC.
    Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
    If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
    I prefer the very short lease but response has been mixed.
    Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
    And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

  • Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

    I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
    It happens both with MS Project 2010 and 2013 on a Windows 7 desktop. 
    I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode. 
    Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
    all other Office programs work seamlessly. 
    I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug. 
    I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem. 

    This issue was originally reported with MS Project 2007 and keeps popping up since.
    A quick Google search provides more than 200K pages of results of this issue:
    https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
    And 193K results on Bing:
    http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
    Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
    stopped attempting to configure itself, everything came back to normal and the available space became available again.)
    Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them. 
    Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
    they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
    Also, I am not running a SQL server, or any server, this is an installation on a local machine. 

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

    After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
    == This happened ==
    Every time Firefox opened
    == Upgrading to newer Firefox version (3.6.8)

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

    Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
    Word, and powerpoint application are working fine.  
    Environment :  Windows 7 64-bit, MS Office 2013 64-bit
    Steps to recreate
    (i)  Create new user account and add to any group ( do not log on using this
     account)
      (ii)  runas /user:<new user account>  <fullpath>\excel.exe
       it will ask password so enter on command prompt
    (iii)  open any excel document  and click File->Print
      (iv)  verify result  (it is failing) it pop ups below error
     Error:`Microsoft Excel
     No printers are installed. To install a printer click the File tab, and then click
     Print. Click No Printers Installed, and then click Add Printer. Follow the
     instructions in the Add Printer dialog box.                                                                                                               

    Sorry for late reply i was not at work
    I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
     Probably excel behaves differently from other office applications.
     Probably it is a bug in excel
    Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
    It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

  • I have tried installing Livetype 3 times and the Effects are not installed.

    I have tried installing Livetype 3 times and the Effects are not installed. The animated text behaviors are not available. What might I be doing wrong?

    I have tried installing Livetype 3 times and the
    Effects are not installed. The animated text
    behaviors are not available. What might I be doing
    wrong?
    I have the exact same problem! I sent the discs into my local Apple Center so they could check the discs. A month later I get them back by mail and an e-mail that says "there is no problem with the discs, therefore it must be a problem with you system". Not very helpful, and it took forever before they got time to check the discs. Pretty ****** off by now...
    EDIT: It is probably worth mentioning that I get an error when installing LiveType 1B at about 4% of installing, that says "there were errors installing, please try again". I am installing the LiveType content on my LaCie 250GB USB external hard drive, although I have already tried installing the content on the built in hard drive as well..
    Message was edited by: NitRam Den Gale

  • I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

    I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

    Apple Application Support was not found. Apple Application Support is required to run iTunes.  Please uninstall iTunes,  then install iTunes again.  Error 2 (Windows error 2).
    Many thanks. That issue will be causing the iTuneshelper error message too.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for

  • Itunes 10.6 and 10.7 crash after installing icloud control panel

    I recently upgraded itunes 10.6 to 10.7 on my windows home server 2011 computer and also installed iCloud control panel 2.0.  After the upgrade itunes crashes within a few seconds of starting.  I can see the status bar saying that itunes is accessing

  • Addtional Attribute - cFolder PDX

    Hi All, In SPRO -cFolders- Seetings for cFolders Import and Export- Specify Field mapping profile for PDX package Import /Epxort, while trying to create Additioanl attribute in XML Profile for BOM, its throwing an ABAP dump while saving this.. The er

  • IPad keyboard question.

    can I force my ipad keyboard to open? I run a program that requires an 'enter' command, in a non 'type-defined' area of the page. Many thanks for your help in advance.

  • Configure Email on X86 !!!

    All, I am trying to cofigure my Verizon email account that has POP and SMTP server with X86. Please let me know how can I configure it ? Thanks again and hope to hear from someone. I know the POP3 server and SMTP server addresses. Thanks again. From

  • Laptop does not start after windows 8 update

    hi every one 2 days ago my hp-15 notebook got 2 windows 8 updates. The 2nd one failed and after 1 hr i removed the battery to put it out of it's misery. now, when i push the start button only the wifi-lichts go on for about 30 sec and then the system