External Appointment - no decline message

Hello
I have the following situation:
User (GroupWise) send an appointment to an external System (Exchange). If the external User decline/accept the appointment, the Exchange Server send back an Decline/Accept Message to the Sender. But the user who have send the appointment, never receives the decline/accept message.
When i look at the GWIA logs, i can see the decline/accept message from the exchange system, but this message never goes to the inbox of the user.
I checked severall settings in GroupWise Client and GWIA, but i cannot find the right one. DSN is enabled.
System:
OS: OES2SP3
GroupWise System: 2012 SP2 Build 108211
GroupWiswe Client: 2012 SP2 Build 110465
Chris

In article <[email protected]>, Chfritsche wrote:
> I have the same problem with a groupwise test system. the test system is
> on the same version/build as the productive system.
> could it be a bug ?
>
Certainly does, especially after looking at that work around. Might be
worth opening an SR on this to prod things along in getting it fixed
properly. If possible, see about getting the bug number as I can't find
any that apply.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php?userid=75037
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

Decline message in some foreign languages default to german

Groupwise 2014 Clients set to Swedish or Danish have a feature where an appointment being declined by a recipient results in the decline message coming back in german and not in the language the client is using.
Please note that other messages all seem to be in the correct language. Below is a decline message received to a Groupwise Client using Swedish as only language.
"XXX hat folgende Nachricht abgelehnt: test; (5. Dez 2014 12:30) CET"
Further testing has shown that if the decline message comes in shortly after startup of the Groupwise Client, it appears in swedish, but wait a few minutes and subsequent declines come in in german.
We proceeded to uninstall the Groupwise client and re-install this time including Swedish and English languages, and this time around the decline again was swedish right after Groupwise client startup and after a while it went to be english. So adding English as a client language fixed the "german" feature, which is better but still isn't quite right
Anybody has a fix for this - or have seen similar behaviour ?
Or are we heading straight for a SR ticket ?
KR/Bjrn

Am 05.12.2014 09:36, schrieb bkelsen:
>
> Groupwise 2014 Clients set to Swedish or Danish have a feature where an
> appointment being declined by a recipient results in the decline message
> coming back in german and not in the language the client is using.
>
> Please note that other messages all seem to be in the correct language.
> Below is a decline message received to a Groupwise Client using Swedish
> as only language.
>
> "XXX hat folgende Nachricht abgelehnt: test; (5. Dez 2014 12:30) CET"
>
> Further testing has shown that if the decline message comes in shortly
> after startup of the Groupwise Client, it appears in swedish, but wait a
> few minutes and subsequent declines come in in german.
>
> We proceeded to uninstall the Groupwise client and re-install this time
> including Swedish and English languages, and this time around the
> decline again was swedish right after Groupwise client startup and after
> a while it went to be english. So adding English as a client language
> fixed the "german" feature, which is better but still isn't quite right
>
>
> Anybody has a fix for this - or have seen similar behaviour ?
>
> Or are we heading straight for a SR ticket ?
Being german, I say go for the SR.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Dears iTunes gives me the Payment method declined message and i bought Gift card 25$ and not work because i am in kuwait store and can not change store to USA. i try Master and visa and gift card what i can try else also i can not update free applicati

Dears
iTunes gives me the Payment method declined message and i bought Gift card 25$ and not work because i am in kuwait store and can not change store to USA. i try Master and visa and gift card what i can try else also i can not update free application. my iPhone now useless.
please help me ASAPi have to buy some application urgently.

Whether you are trying to use a Credit Card or Redeem a Gift Card... My understanding is that you have to be within the US to use the US Store and have a valid US Billing Address.

Trying to install Windows7 on osx Lion using USB or External superdrive but the message i get is "NON DISK SYSTEM"

Trying to install Windows7 on osx Lion using USB or External superdrive but the message i get is "NON DISK SYSTEM"
i also tried rEFIt but...the same....i tried using bootcamp to create a bootable usb stick but i lost this option after i upgraded BOOTCAMP to 5.0.4

Trying to install Windows7 on osx Lion using USB or External superdrive but the message i get is "NON DISK SYSTEM"
i also tried rEFIt but...the same....i tried using bootcamp to create a bootable usb stick but i lost this option after i upgraded BOOTCAMP to 5.0.4

Exchange 2010 calendar meetings - allows meeting to be sent then sends decline message

We updated from Exchange 2003 to 2010 last year and are still trying to figure out how to make the resource rooms work properly. In 2003, if you tried to schedule a meeting and the room was not available, it would not let you send the request.
2010 does and then sends back a decline message. Can this be changed to be like 2003?

Is there not a way to have Outlook reject the meeting before sending it (like exchange 2003 did)? I know you can see this in scheduling assistant but not all users use that unfortunately....they just type in the names and send. Before
in Exchange 2003, it would check availability before sending and NOT send the meeting at all if the room was not available. That is what I would like to get back to.
Nope. Not possible in Exchange 2010 or 2013 using the built-in Exchange Calendar Asst features. Direct-booking is not recommended and Outlook 2010 and above do not allow it by default.
That is by design, allowing the server to manage and handle the meeting request logic.
The reason being is that there is now built-in delegate moderation, in-policy and out of policy requirements etc... The resource mailbox has no way of knowing if the meeting request meets or fails the requirements without receiving it first.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Body of Accept/Decline messages from resource room mailboxes blank when viewed with Outlook 2010 or 2013.

I stumbled across a funny little problem yesterday after a rash of users calling wanting to know why rooms were declining their meeting requests..
The rooms were declining for perfectly legitimate reasons.. Conflicts or no end date but the accept/decline reply messages the rooms were sending out had no details in the message body when viewed from Outlook 2010 or 2013.
If message preview is enabled in Outlook 2013 you can read a few lines of the body in the inbox view but it's still blank when you open the message.
Reading pane is also blank.
Opening the message from OWA or my phone shows the complete message body.
Very odd. It reminds me of the bug in Exchange 2013 CU2 where meeting invites to external users were sent blank unless they were sent as iCalendar.
Maybe this will resolve itself when I load SP1 in a few weeks.
Any one else seeing this?
We are running 2013 CU 3

Hi Scott,
I have tested in my Exchange 2013 CU1 environment and I can reproduce your issue in Outlook online mode. Please check whether the problematic users are using Outlook Online mode in Outlook 2010 and Outlook 2013.
The issue doesn’t happen in OWA and Outlook Cached mode. Therefore, I recommend users can change their Outlook client to Cached mode as a workaround. To do it, we can:
Open Outlook, click File > Account Settings > Account Settings. Double-click the account, check Use Cached Exchange Mode > Next and finish it. Restart Outlook to use it in cached mode.
Thanks,
Winnie Liang
TechNet Community Support

Moving iTunes files to external hard drive -- error message

Trying to copy iTunes files from iBook G4 to a nearly empty 320 GB FreeAgent Pro external hard drive. When I attempt to consolidate the files, I receive an error message saying "there is not enough room on external hard drive to copy files". I have a very small internal hard drive on the laptop and not very much music so the message doesn't make sense to me.
The external hard drive appears in Finder, and says the format is "Mac OS Extended (Journaled)".
Any tips on where to go from here? I'm about out of room on the laptop and desperately need to move files to an external hard drive to free up space.
Thanks,
Brendan

If you follow the steps in this article, it should work.
Just delete everything from your exHD and start over.
http://support.apple.com/kb/HT1364
Also - naming your exHD a letter far down in the alphabet is a good idea.
E: F: and G: are frequently used by other USB devices, and if your exHD letter changes, you'll get all the ! marks again.
So name it K: or Q: or W:, something another USB is unlikely to use.

External definitions import into Message mapping

Hi,
I have a DTD message in external definitions to be imported into the message mapping. But I am not able to choose the object in the mapping editor. It does not allow even if the message is a valid WSDL. The only time it allows to import into the message editor is when its an XSD.I am not sure why the external definitions in DTD or WSDL formats are not able to be imported or am I missing something??
-Ken

Hi,
A conversion of the downloaded cXML DTD into XSD by using XMLSPY yields 3 XSD files. Using the initial XSD(which has the major fields) yields the same error(i.e cannot create messages or valid WSDL) in external definitions.
I also tried using one of the standard xml's from the cXML site and the funny part was XMLSPY validated them without errors and while importing them directly into the mapping editor, XI throws an error "XML NOT WELL FORMED". Its so weird.
Also is there a possibility to write a script to manipulate the payload message after passing through the adapters? For eg : Creating a script which will delete a valid tag in payload before it reaches the 3rd party. ...By adding the DOCTYPE in the prolog, the message would look like this :
"<?xml...utf-8>
<!DOCTYPE......'Cxml.org'>
<?xml.....utf-8>
<start tag></start tag>
Therefore some kind of a script that would remove the second <?xml tag on line 3>..
This is just a round about thinking
Any ideas..

Problem in Create Appointment and instant messaging.

Hi All,
When i send a mail through creat appointment using RTC. DAte and time which the user gets in his mail are different then what i have mentioned in create appointment mail.
Is there any way to change the instant messening layout. I want to increase the size of message box.
Thanks in advance
Sarang

Hi Prabhakar,
When i check the availability of any person actually it is showing the status as busy defaultly, although we have not mention it anywhere. i want to change the status from busy to available. What i need to know is where can i change the status .
Thanx ....
Sarang

External monitor "No Signal" message

MacBookPro mid 2010 with 250GB solid state drive. W80183G9AGZ
Two problems, they may be related
Randomly for some time the computer restarts with the message “Your computer has restarted because of a problem”
This generates a crash report which I always send to Apple.
(Unfortunately this computer does not support Apple Hardware Test nor Apple Diagnostics).
Today the computer will not send a signal to the external monitor, ( a Samsung TV).
I have carried out the following fault finding.
DVI-HDMI cable plugged and unplugged several times in different order before and after -
Restart
Shutdown and then Restart
Reset PRAM
Reset SMC
The same when using a VGA cable.
With HDMI there is a “No Signal” message, with VGA the screen just stays black.
Both HDMI and VGA previously worked flawlessly.
Checked that the GPUs are switching correctly from the integrated Intel HD graphics to the NVIDEA GForce 330M. Previously, as soon as this happened, the external monitor desktop image would appear immediately.
The presence of the external monitor is not being sensed, in “Displays” in System preferences no second display options are present.
Questions
Is the video problem definitely the NVIDEA GPU or could it be the computer crashing problem just getting worse?
Is it possible to replace the NVIDEA GPU if it is faulty?
Although the problem seems to be the same with both HDMI and VGA could it still be a problem with the HDMI cable?

same results:
Screen 0: minimum 320 x 200, current 1366 x 1024, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1366x768 60.2*+
1024x768 85.0 75.0 70.1 60.0
1024x768i 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0 72.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
640x350 70.1
external monitor becomes a copy of LVDS1(according to xrandr) but monitor's screen is still black.

External HD shows intialize message even when it was working

Hi There,
I have 250GB external HD which I bought around 6-7 months back. I was using it till last month. I haven't used it since then for around 30 days and today I wanted to use, I get a message that the HD is not "in readable" format for MAC OS X and asks me to initialize.
When clicked on initialize and used "Erase" option from disk utility it does not zero out data for long time. It never reduced the time remaining to zero out data from14hrs and never updated the progress bar.
Can someone suggest me what could be wrong here?
Thanks,
Brilty

yeah i tried... looks like the HD has gone bad. I gotta get it checked from a service center.

Card details on debit card declined message. Used card many times before please help

I've made many purchases before on this card only all of a sudden istore and the app store are refusing it. Every time I try to download an app it says there is a billing problem with a previous purchase please update your information. Every time I do it says your payment method was declined please enter another payment method. But I've been using this payment method for over a month and half now, so whys it doing this now. Please help, I've tried changing my password, I've tried re entering all the information, but nothing's working. I can't even update my apps because of it.

If your card isn't being accepted, there is a reason it is being declined. Maybe you made a small typo with the address you entered, maybe an abbreviation is off, but something is causing your credit card company to deny the charge. These types of online vendors automatically send the details you entered to your bank's computer system, so even tiny differences like entering "St." instead of "St" are enough to cause problems. If that isn't the problem, you'll need to sort it out with your bank.
The message about your previous purchase means that iTunes was never able to receive payment for an order on your account. If your card keeps gettng declined, you might need to pay for that order with a different credit card or an iTunes gift card before you can buy anything else. You should probably email iTunes Store support to see if they can look over your account and locate the source of the problem is.

Ical is sending decline messages for accepted invites

When I get a calendar invite and accept it, all seems well, until I get an email back from the person inviting me asking why I accepted and then proceeded to decline the invite. I don't know what is happening. Can anyone help?

I've read this article regarding problems of Japanese users and decided to post it here instead of making n+1st separate topic:
http://docs.info.apple.com/article.html?artnum=301986
I have a similar problem, but with Russian characters. When I add attendees to my event in iCal and send them invitations, some of them (MS Windows/Outlook 2003 users) see garbage in the e-mail they recieve. The Sender field contains garbage where my name should be, and then goes the e-mail address of mine which looks normal.
It happens because the message sent with Mac OS X Mail is being encoded in Unicode while MS Outlook expects cp1251 (Windows) encoding, so my name taken from 'My card' entry in Mac Address Book is shown wrong.
How do I change default encoding to cp1251? I tried doing (according to the instructions in the articel for Japanese users):
# defaults read com.apple.mail
but it said there is no such domain, and listing of domains gives:
# defaults domains
blued, com.apple.Bluetooth, com.apple.HIToolbox, com.apple.driver.AppleHIDMouse, com.apple.symbolichotkeys
OK, I just temporarily changed my name by retyping it in transliteration, so that there are no Russian characters.
The message received by MS Outlook looks fine then, but the answers sent back to me aren't processed by iCal properly! It shows that a reply is received but doesn't updates the status - agreed, declined, tentative.
What do I do with that? Are there any additional actions my colleagues can take? Any additional software? Anything?!

Time Machine - external hard drive "full" message

I have 300GB of memory on my laptop (which isn't all used by any means) so bought a 1TB external hard drive for my Time machine back ups. I back up infrequently and have done it about 5 or 6 times. The last time it said "full". How can I have filled it up? Do i have to delete a load of stuff from the external to be able to keep backing up?

See #C4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

Terms and conditions repeated accept/decline messages

Everytime I open iTunes (the last several weeks), I'm asked to accept T&C again and again. I have to re-establish sync from iPhone to PC.
This is mostly annoying, and I'm concerned sync isn't working correctly. Any help out there on this issue? I see others are having it too.
Thanks!

Same problem on iphone5 iOS7. The "Send by Email" button doesn't work. No where to accept terms. Made me scroll through 54 pages of corporate trash to show me it doesn't work. Id like to see an extra page in the terms that agrees to pay me back for time wasted.

External Appointment - no decline message

Similar Messages

Maybe you are looking for