External Hard Drive and System

This is my computer spec's, I have updated to 10.5.3 from 10.3.9 and all is working perfectly except photoshop.
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.1)
Processor Speed: 1.25 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.2f1
Serial Number: G84**ZQJB
I am buying this firewire external drive, can I put my 10.3.9 system on the drive so that I can use photoshop 7.0 again?
"LaCie 301825U d2 Quadra 500 GB eSATA/FireWire800/FireWire400/USB 2.0 External Hard Disk"
Thank you much for any suggestions or help.
Margit in Minnesota
<post edited by host>

I am buying this firewire external drive, can I put my 10.3.9 system on the drive so that I can use photoshop 7.0 again?
Yes.
(32593)

Similar Messages

  • HT204414 does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

    does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

    I have the system Library on a second internal drive and it is syncing with iCloud with no problems. Also the Media Browser it seeing it there.
    Only make sure, your external drive is directly connected and correctly formatted MacOS Extended (Journaled).

  • How do I back up my itunes to an external hard drive and restore from same if necessary

    How do I back up my entire itunes to an external hard drive and restore from same if necessary.
    Thanks

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

  • I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

    I have an IMac with an external hard drive set up as  a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

    Open System Preference > Time Machine
    Click Options....
    Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
    Allan

  • Can i make (for example) 3 partitions on my external Hard Drive, and make different formatations for each, so i can share files of one of them in a pc and mac?

    Hello ...
    My name is Rui, i'm from Portugal ... (so please be patiente with my english, it can get a bit confusing)
    so... first of all ... i have to say ... i'm still a pc user ... i don't have a Mac ... yet ... they are sold out right now in the shops near me ... i am waitting for them to arrive so i can pick up mine ... (i wish in a couple of days i will be entering the Mac world ....) ... i'll be picking the "entery" iMac model, the 21,5'', i5 with 500gb hard disk ... well .. i know it's the cheapest one (i hope it is a good machine tho) ... but it's my entering Mac world too (my only apple products till know were the ipod ...) ... one of my concerns are being the 500gb hard drive ... that for my pc experience is a little bit short ... that makes me a little scared (but paying 300e for the next model to have a 1tb disk, it's not a good option for me right now) ...
    so..
    I've been reading a lot about iMac's ans OS X so i can get familiar with this all new world ...
    and i couldn't get any answer for some of my doubts... so i decided to ask you Mac Users ..
    My idea is to have an external HD to store files (and not to fill the 500gb of the iMac) ... and i am wondering if it would be possible to make this ...
    - make three partitions on the external Hard Drive and
    - the first be formatted in Mac OS extended (journaled) mode
    - the second on fat 32 - so i can store and share files with a mac or pc
    - third be reserved for  Time Machine
    i wonder would that be possible... or would make sort of incompabilities ... would it work all well ?
    hummm ...
    I hope someone can help me with this ...
    ... if it is a silly question ... sorry ... but please remember, i've never had a Mac computer (i'm waiting for my 1st iMac to be available on store) ... so a lot of things are "flying" in my head right now ...
    ... and of course .. sorry for my english ... i hope you all understood me ...
    thanks (obrigado) a lot for your patience...
    Rui from Portugal

    Hi! Dwagner, once again ...
    I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
    ... "i can do it, i can do it" eheeh
    i'm in that period that a new question appears at almost every mouse click ... lol
    so ... can you help me (once again) ..
    you said you had your hard drive with this settings...
    "You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
    You can partition for Windows (NTFS) - readable by only Windows
    OR - you can format with ex-FAT and this is read/write capable for both operating systems."
    how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
    i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
    once again Obrigado (Thank You)
    Rui from Portugal

  • Move PC iTunes library to external hard drive and consolidate with iMac

    Hi, I have a PC that I'm not using much. I have a ton of iTunes music files on it so I went through the process of copying these files to my networked external hard drive. I have my iMac connected wirelessly to this same hard drive. I went into the System Preferences on the iMac to tell it where it could find the new library and I pointed it to the iTunes folder but there is not an iTunes Media folder like many of the articles state, like this one: http://support.apple.com/kb/HT1449
    Do I need to create an iTunes Media folder? Note this is an iTunes Library that was on a PC, moved to a networked external hard drive and will be used on my new iMac.
    Thanks.

    kneedragger101 wrote:
    Note this is an iTunes Library that was on a PC
    you might want to read these articles: one and two.
    why not move your media files using _*Home Sharing*_ ?

  • External hard drives and Error Code -36

    Just wanted to know if anyone knows what this error code means. I tried copying a bunch of video files about 600-700 mb to my USB external hard drive, and this error message popped up and said the disk could not be read or written to. I contacted the manufacturer of the hard drive and they said it was not a manufacturing fault, but an issue regarding the operating system.
    Does anyone know why this might be? And also, does anyone know of anyway to get around it?
    Thanks.

    You can try DiskWarrior to repair the directory. If DW can't do it, you'll need to re-format the drive. I'd also suggest a zero out erase.
    Steps for zeroing the drive Disk Utility:
    1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
    2. Once started up from CD or DVD, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)

    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3. Choose the entire disk (top icon).
    4. Choose erase tab.
    5. Click on "Security Options"
    6. Choose "write zeros".
    7. Erase
    This will take a bit of time because the computer is physically writing zeros to each block.

  • How to move huge HD video files between external hard drives and defrag ext drive?

    I have huge high definition video files on a 2TB external hard drive (and its clone).  The external hard drive is maxed out.  I would like to move many of the video files to a new 3TB external hard drive (G-drive, and a clone) and leave a sub-group of video files (1+ TB) on the original external hard drive (and its clone).  
    I am copying files from original external drive ("ext drive A") to new external drive ("ext drive B") via Carbon Copy Cloner (selecting iMovie event by event that I want to transfer). Just a note: I do not know how to partition or make bootable drives, I see suggestions with these steps in them.
    My questions:
    1.)  I assume this transfer of files will create extreme fragmentation on drive A.  Should I reformat/re-initialize ext drive A after moving the files I want?  If so, how best to do this?  Do I use "Erase" within Disk Utilities?  Do I need to do anything else before transfering files back onto ext drive A from its clone?
    2.) Do I also need to defrag if I reformat ext drive A? Do I defrag instead of or in addition to reformating?  If so, how to do this? I've read on these forums so many warnings and heard too many stories of this going awry.  Which 3rd party software to use? 
    Thank you in advance for any suggestions, tips, advice.  This whole process makes me SO nervous.

    Here is a very good writeup on de-fragging in the OS environment that I borrowed
    From Klaus1:
    Defragmentation in OS X:
    http://support.apple.com/kb/HT1375  which states:
    You probably won't need to optimize at all if you use Mac OS X. Here's why:
    Hard disk capacity is generally much greater now than a few years ago. With more free space available, the file system doesn't need to fill up every "nook and cranny." Mac OS Extended formatting (HFS Plus) avoids reusing space from deleted files as much as possible, to avoid prematurely filling small areas of recently-freed space.
    Mac OS X 10.2 and later includes delayed allocation for Mac OS X Extended-formatted volumes. This allows a number of small allocations to be combined into a single large allocation in one area of the disk.
    Fragmentation was often caused by continually appending data to existing files, especially with resource forks. With faster hard drives and better caching, as well as the new application packaging format, many applications simply rewrite the entire file each time. Mac OS X 10.3 onwards can also automatically defragment such slow-growing files. This process is sometimes known as "Hot-File-Adaptive-Clustering."
    Aggressive read-ahead and write-behind caching means that minor fragmentation has less effect on perceived system performance.
    Whilst 'defragging' OS X is rarely necessary, Rod Hagen has produced this excellent analysis of the situation which is worth reading:
    Most users, as long as they leave plenty of free space available , and don't work regularly in situations where very large files are written and rewritten, are unlikely to notice the effects of fragmentation on either their files or on the drives free space much.
    As the drive fills the situations becomes progressively more significant, however.
    Some people will tell you that "OSX defrags your files anyway". This is only partly true. It defrags files that are less than 20 MB in size. It doesn't defrag larger files and it doesn't defrag the free space on the drive. In fact the method it uses to defrag the smaller files actually increases the extent of free space fragmentation. Eventually, in fact, once the largest free space fragments are down to less than 20 MB (not uncommon on a drive that has , say only 10% free space left) it begins to give up trying to defrag altogether. Despite this, the system copes very well without defragging as long as you have plenty of room.
    Again, this doesn't matter much when the drive is half empty or better, but it does when it gets fullish, and it does especially when it gets fullish if you are regularly dealing with large files , like video or serious audio stuff.
    If you look through this discussion board you will see quite a few complaints from people who find that their drive gets "slow". Often you will see that say that "still have 10 or 20 gigs free" or the like. On modern large drives by this stage they are usually in fact down to the point where the internal defragmentation routines can no longer operate , where their drives are working like navvies to keep up with finding space for any larger files, together with room for "scratch files", virtual memory, directories etc etc etc. Such users are operating in a zone where they put a lot more stress on their drives as a result, often start complaining of increased "heat", etc etc. Most obviously, though, the computer slows down to a speed not much better than that of molasses. Eventually the directories and other related files may collapse altogether and they find themselves with a next to unrecoverable disk problems.
    By this time, of course, defragging itself has already become just about impossible. The amount of work required to shift the data into contiguous blocks is immense, puts additional stress on the drive, takes forever, etc etc. The extent of fragmentation of free space at this stage can be simply staggering, and any large files you subsequently write are likely to be divided into many , many tens of thousands of fragments scattered across the drive. Not only this, but things like the "extents files", which record where all the bits are located, will begin to grow astronomically as a result, putting even more pressure on your already stressed drive, and increasing the risk of major failures.
    Ultimately this adds up to a situation where you can identify maybe three "phases" of mac life when it comes to the need for defragmentation.
    In the "first phase" (with your drive less than half full), it doesn't matter much at all - probably not enough to even make it worth doing.
    In the "second phase" (between , say 50% free space and 20% free space remaining) it becomes progressively more useful, but , depending on the use you put your computer to you won't see much difference at the higher levels of free space unless you are serious video buff who needs to keep their drives operating as efficiently and fast as possible - chances are they will be using fast external drives over FW800 or eSata to compliment their internal HD anyway.
    At the lower end though (when boot drives get down around the 20% mark on , say, a 250 or 500 Gig drive) I certainly begin to see an impact on performance and stability when working with large image files, mapping software, and the like, especially those which rely on the use of their own "scratch" files, and especially in situations where I am using multiple applications simultaneously, if I haven't defragmented the drive for a while. For me, defragmenting (I use iDefrag too - it is the only third party app I trust for this after seeing people with problems using TechToolPro and Drive Genius for such things) gives a substantial performance boost in this sort of situation and improves operational stability. I usually try to get in first these days and defrag more regularly (about once a month) when the drive is down to 30% free space or lower.
    Between 20% and 10% free space is a bit of a "doubtful region". Most people will still be able to defrag successfully in this sort of area, though the time taken and the risks associated increase as the free space declines. My own advice to people in this sort of area is that they start choosing their new , bigger HD, because they obviously are going to need one very soon, and try to "clear the decks" so that they maintain that 20% free buffer until they do. Defragging regularly (perhaps even once a fortnight) will actually benefit them substantially during this "phase", but maybe doing so will lull them into a false sense of security and keep them from seriously recognising that they need to be moving to a bigger HD!
    Once they are down to that last ten per cent of free space, though, they are treading on glass. Free space fragmentation at least will already be a serious issue on their computers but if they try to defrag with a utility without first making substantially more space available then they may find it runs into problems or is so slow that they give up half way through and do the damage themselves, especially if they are using one of the less "forgiving" utilities!
    In this case I think the best way to proceed is to clone the internal drive to a larger external with SuperDuper, replace the internal drive with a larger one and then clone back to it. No-one down to the last ten percent of their drive really has enough room to move. Defragging it will certainly speed it up, and may even save them from major problems briefly, but we all know that before too long they are going to be in the same situation again. Better to deal with the matter properly and replace the drive with something more akin to their real needs once this point is reached. Heck, big HDs are as cheap as chips these days! It is mad to struggle on with sluggish performance, instability, and the possible risk of losing the lot, in such a situation.

  • I spent hrs fixing my iTunes since I did the update and it wiped out everything! I have put all of my iTunes on my external hard drive and it works but I got a new computer.  I installed iTunes on the new computer but now the folders on my ehd are empty!

    I am having a very hard time.  First I finally got all of my music back into iTunes and then moved them all to my external hard drive.  I set up iTunes to automatically put and get music from the external hard drive and whenever I open the drive al of the music is there.  Now, I bought a new computer and went ahead and got iTunes all set up then tried to add folder to import from the external hard drive but all the music folders are empty!  They show the names of the artists and the albums but there is nothing inside.  Please help!!

    If you've just moved the drive between systems then see Repair security permissions for iTunes for Windows just in case that reveals the missing files. Apply to a single album folder first as a test. Otherwise, if you've not done too much with the drive since things went missing, an undelete tool might recover the lost media. FreeRecover looks promising... Select the drive, use the options to get file paths and check file integrity, then, presumably, you can restore anything that has been deleted that looks recoverable. Backup to another drive when you're done.
    tt2

  • I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fi hiw do I get iMac to do it

    I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible

    To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere

  • HT1751 I copied my old itunes library from my pc on to a external hard drive and put it on my laptop. How do i merge it with my current itunes account on my laptop?

    I copied my old itunes account on my pc to an external hard drive and put it on my laptop. How do i merge my old itunes with my current account on my laptop?
    Thanks

    Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • Can I connect an externa hard drive and access files from 2 or more computers wirelessly?

    Is there a way to connect an external hard drive to my linksys modem and access the files wirelessly by 2 or more computers?
    I have a wireless G wrt54G modem working on windows XP a desktop and laptop on my home system. I have a WD “my book” external hard drive with a usb interface. My modem does not have a USB interface.
    At work I also have 4 laptops  using XP and vista and looking to have them all access an external hard drive and printers. I have not selected a hard drive for the work system.
    If yes can I add 2 or more printers and print form all connected computers?
    If yes, is it possible to access the files of the external hard drive (home system) via the internet?
    Thanks in advance for all your help

    First, your WRT54G is a router, not a modem. Different function.
    Yes, you can  "connect an external hard drive... and access the files wirelessly by 2 or more computers," just not that external hard drive. You need one that supports network attachment, with an ethernet connection.
    And you can print to printers from various computer, again if the printers are made to support that.
    The answer to your last question is maybe. Oh, it's definitely possible, but may require learning about static IP addresses, dynamic DNS, firewalls, port forwarding, file sharing...

  • Installing OS X on external hard drive, and installing from external HD

    my ibook's optical drive does not work, and the hard drive in my computer is completely empty. can i use another mac to install OS X on my external hard drive, and then install the OS from the external hard drive back to my ibook?

    There are a few fairly good clone utilities available; although I use a
    donationware (runs uninhibited direct from download online) by Mike
    Bombich named Carbon Copy Cloner, with a good amount of inform-
    ation available at the home and download pages for reference; users
    have had good use of Super Duper, CloneX, to do backups & clones.
    Other utilities, such as the Disk Utility in your system install/boot disc
    can be used to move a bootable archive of your system between disks.
    Drive Genius (a retail software product) is said to be able to utilize
    clones, but I have no experience in that product; although I do own it.
    I like Carbon Copy Cloner, and test my clone's ability to run the Mac
    before attempting to zero-reformat the machine's internal hard drive, etc.
    A simple search of Mac sites (I use google.com/mac) can bring up
    discussions specific to these third-party tools. The home page of
    Mike Bombich's Carbon Copy Cloner is worth a detailed look into.
    OS specific versions are available. http://www.bombich.com/software/ccc.html

  • Run itunes off external hard drive and keep settings

    I have an imac which has my consolidated music library on it. I also have a macbook which i use while traveling. My itunes is about 130 gigs, which is fine on my imac, but too big for my macbook. in the past what i have done is just put everything on my 80 gig ipod, and then do the manual setting in itunes so that, if i get new music while traveling, i can put it on the ipod. anyway, that ipod was stolen and now i have a nano. So what i want to do is somehow copy my itunes from my imac onto an external hard drive, and then run itunes off that from my macbook. the point being to have my whole music collection there. The problem is that i cant seem to keep all my ratings, play counts and settings and stuff, the macbook doesnt recognize the setting file when its on the hard drive. Is there a way to do this? I tried changing the iTunes music folder location to the folder on the hard drive, but that did not make the songs appear in itunes on the macbook.
    In addition, what id like to be able to do is, when i come back, copy the itunes from the external back onto my imac with all the new ratings, play counts, and music.
    Message was edited by: poil66

    See this article, iTunes for Mac: Moving your iTunes Music folder, http://support.apple.com/kb/HT1449
    "If you just want to move all those music and media files to another hard drive on your system, here's a way to make the move while retaining all your playlists, ratings, and play history."

  • How do I save just my photos to an external hard drive and still access them in iphoto

    I have a lot of photos that take up space on my hard drive. It is now full and I need to continue to use them but i need to load new photo also. How do i save the old photos onto an external hard drive and then still access them in iphoto?

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

Maybe you are looking for