External number range for equipment number

Hi All,
How to maintain external number range for equipment number?( t-code IE01)
Thanks in advance,
Soumyendu

Dear ,
Go to...
spro -
pm/cs -
master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
Regards,
Ishwar

Similar Messages

Any FM for create an external number range for equipment number ????

Hi all,
Any FM for create an external number range for equipment number??????
thanks & regards
indu.

Hi
you can use below FM to get number range
   CALL FUNCTION 'NUMBER_GET_NEXT'
    EXPORTING
      nr_range_nr                   = 'Z1'
     object                        = 'ZTEST'
     object                        = 'ZFIREC'
     quantity                      = '1'
     subobject                     = p_compcd
     toyear                        = p_fisc
   IMPORTING
     number                        = v_seqno.
thanks & regards,
bhupal.

Define Number Range for Reference Number

Hi all,
I am trying to maintain Different Number ranges for Loans in ESS.
Once i maintain Define Number Range for Reference Number in Loans ESS and trying to raise a new loan from ESS is till see that the ref number is still displayed 0 while raising the New Loan.
No From Number To Number
10
I maintained range for number range number 10.
Pls suggest me on this.
The above scenario works for claims but not for Loans
Regards
Vijay

Solved my self...!

Alphanumeric Number Range For Serial Number

Hi Friends
How can i use alpha-numeric number range for serial numbers.I am using serial number profile For GR Process
Regards
Vivek

Hi,
You may check link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/3c/abc157413911d1893d0000e8323c4f/frameset.htm
Ramesh

Number Range for MIRO number

Hi , We are using Park and Post functionality for invoice verification.
The number range (Logistics ) defined for RD (Post invoice ) and RS (Cancel Invoice) is 01.
The Number intervals defined for number range 01 are
Number Year From TO Current number
Range
01 9999 5105600101 5105699999 5105603042
But surprizingly when we do MIR7 (Park document ) , current number gets increased by 10 , instead of single.
For example , earlier the current number here (in spro) was 5105603030. I created a MIR7 document, the number given to me in MIR7 was 5105603029 and system didn't change current number in spro.
I created the another document , the number given to me in MIR7 was 5105603030 and system didn;t change the current number in SPRO this time also.
BUT WHEN I CREATED a another document in MIR7 , number given to me was 5105603031 but current number (in SPRO) was changed to 5105603040.
I am not sure , why it is changing CURRENT number with interval of 10 ??
Need yr help
Regards
Shrey

hi,
Please check the custumized settings for MIR7, may be u have given in reverse order and the interval between two documents may be 10. please go through the accounting document number ranges.
Thanks & Regards
Swathi

The external number range for Equipment master

Dear Experts,
My client has requirement to use KKS code as Equipment number as they want to create Notification and Maintenance order using the KKS code.
For example 10H, 10BEB, 20BHB04, 10LBG10AA001, 10HLA13AA001A, 10ETG10AN001-E etc.
All these KKS codes has different character length hence it's not fit in any number range.
can anyone suggest the external number range that I can use for above requirement?
Thanks.

Parag,
I have checked again. It is working correctly. Remember that the following setting the check box below the column A should be empty. This allows Alphanumeric characters in the numbers.
SPRO Path to above setting
My Equipment category of External Numbers is 'A'.
KJogeswaraRao

Alphnumeric External Number range for Equipment category

Hi,
Is there any other option that I can restrict length of external alpha numeric number range except that exit IEQM0003? This exit only applicable or restrict when you save the equipment.
Requirement is like external number range should be like AAA-000 to ZZZ-999. System must not allowed any other equipment number which is out of this range. ( must be 7 character)
As far as my understanding , system use string comparison once you use alphanumeric number range and you can create equipment with 18 char length except special character if above range is maintained.
Please correct me if i am wrong and suggest.
Thanks
Anish Ahya

Hi Zenith,
Its not available in Standard SAP, please use the user exit and tell the ABAPER to check the Equipment numbering (count) before entering into Creation screen. In IE01,entering equipment Number, Category and date after completion of this activity when we enter continue icon there u can put a condition to check the length of equipment number. I implemented that user exit and i got the result. its working fine. User Exit: IEQM0003.
regards
Jalu

Number range for serial Number in production order

Hi all,
I want to use the Serial Number in production Order ... It should be generated automatically ... when i try this system creating the serial number from 1.....i want the number to start from 2000000 , How to configure this number range ....
Please advise me ...
Regards,
kumar

Dear
Following steps are required in Serial Number Management :
1. OIS2 or Go to path SPRO > Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > Serial Number Management > Define Serial Number Profiles. There enter "2" in Stkck column for your serial profile.
2.SPRO->SAP Customizing Implementation Guide->Plant Maintenance and Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories->Define Number Ranges
3. IQ01 Create Serial Number
4. MM02 You need to add the above created Serial Number Profile in the Material Master ion the work scheduling view .
5. CO02 Assigning the Serial Number through Production Order,
Also Serial Number can be created automatically by clicking on u201CCreate Serial Number Automaticallyu201D , Release the Order
6. MB31 Do the GR for the above created Production Order and Check in MMBE for serial Numbers
Try and check
Regards
JH
Edited by: Jiaul Haque on Nov 22, 2010 7:43 AM

Different Number Range for Batch number in MIGO

Hi Techies,
I have a requirement to assign the internal range number to Batch Number as K120101701 for CHARG field in MIGO. Where K1 is the Storage location, 2010 is year, 17 is current date 01 is the serial Number. Next day the number range should be K120101801, 18 is next day's date. How can I achieve this?
Thanks & Regards,
Muralikrishna P
Edited by: muralipsharma on Nov 17, 2010 5:35 PM
Moderator Message: Do not dump your specifications here for others to do your work. Try on your own first.
Edited by: kishan P on Nov 18, 2010 11:31 AM

just check with following code . it will give all badi and user exit in the transaction . in selection screen u have to pass tcode and package
<<copy-paste from http://naveenvishal.wordpress.com/2009/07/05/user-exits-and-badi-list-for-a-t-code/ or some other location>>
Moderator Message: DO NOT copy-paste other people's work without giving them due credit. If you continue this, you user-id will have to be deleted.
Edited by: kishan P on Nov 18, 2010 11:36 AM

External Number Rane for Equipment using Serialization

Hi All,
I have following requirement.
I need to give the external number range to equipment, at the same time this equipment is serialized. How can it be achieved?
Description: Materials are purchased and at the time of GR material is serialized. I dont want to use the internal number range for equipment, so I am not using equipment number range creation at the time of GR.
Also I can't use the change serial number & activate equipment funcationality. ie. IQ02. (Beacuse here again internal number range for equipment is used)
Sundar

Hi Pete,
I can use the external number range at the GR/GI if material serial number and equiment numbers are synchronus.
But in our case both serial number and equipment number are different.
How can I achieve external number range for equipment for the material and serial number which are already in store. I have to activate the equipement view after the GR for same serial number....OR.....I have to create the equipment seperatly with external number range with same serial number which is available in store.
Sundar

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Number range for trans./event type WA in year 2010 does not exist

Dear Sir,
when i used t-code mb1c to initiate the stock, it occured this error message 'Number range for trans./event type WA in year 2010 does not exist'. i've used t-codes(OBMT,FBN1,OBH2), but it still doesn't work. can you tell me how to solve this problem, please? thanks! the detail error messages as below:
Number range for trans./event type WA in year 2010 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2010 for the transaction/event type WA.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
Material documents
Reservations?

Follow the below instruction as specified in note 370236.
Maintain the number range intervals in Transaction OMBT or in Transaction SNUM. For every interval of the previous year, there should exist an interval with a year specification that is larger than or equal to the current year.Then assign the interval to a number range group.
The attached analysis report 'ZNRIVCHECK' carries out the following check:
If the year and the document type are entered, the report checks whether an interval exists for the document type and for the year.
If the year is entered or the year and the number range object are entered, the program checks whether the intervals of the previous years exist for all of the year-dependent objects in the specified year.Check whether intervals are needed for all entries of the results list and whether the interval was assigned to the number range groups.
thanks
G. Lakshmipathi

External number range in equipment

Hello!
I want to create a number range in equipment which contains letters, numbers, symbols.
For example equipment numbers like:
A125D-6
1-DSDV
tHANK YOU!

Hi, if you pres F1 help in OEIN it is written:
"External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
Allowed: 000001 to 999999
AAAAAA to ZZZZZZ
Not allowed: AAAAAA to 999999
So it looks like either leters or numbers but not both.
However you can ask also in Plant Maintenance forum
Best Regards, Peter

External number range for measuring point

Hi experts,
How to assign external number range for measuring point ?
Regards
Shashi

I have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
SAP documentation as follows:
Create Number Ranges for Measuring Points
In this step you define number ranges for measuring points.
Notes
As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
Jim
Edited by: JamesPetrie on Feb 28, 2012 2:45 PM

External Alphanumeric Number Range for Internal Orders

Hello,
I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
Any help will be appreciated.
Thanks.

how many do you need?
Just one, that covers all?
a0000000 - zzzzzzzz

External number range for equipment number

Similar Messages

Maybe you are looking for