Different Number Range for Batch number in MIGO

Hi Techies,
I have a requirement to assign the internal range number to Batch Number as K120101701 for CHARG field in MIGO. Where K1 is the Storage location, 2010 is year, 17 is current date 01 is the serial Number.  Next day the number range should be K120101801, 18 is next day's date. How can I achieve this? 
Thanks & Regards,
Muralikrishna P
Edited by: muralipsharma on Nov 17, 2010 5:35 PM
Moderator Message: Do not dump your specifications here for others to do your work. Try on your own first.
Edited by: kishan P on Nov 18, 2010 11:31 AM

just check with following code . it will give all badi and user exit in the transaction . in selection screen u have to pass tcode and package
<<copy-paste from http://naveenvishal.wordpress.com/2009/07/05/user-exits-and-badi-list-for-a-t-code/ or some other location>>
Moderator Message: DO NOT copy-paste other people's work without giving them due credit. If you continue this, you user-id will have to be deleted.
Edited by: kishan P on Nov 18, 2010 11:36 AM

Similar Messages

  • Number range for Batch - urgent help

    Dear Champs,
    We need to have internal number range for batches for one plant and external number range for other plant. How & Where to assign number range for plants ?
    Kindly suggest
    Thanks
    Rajesh

    Mr Rajesh
    You can maintain num range internal and external independently with out any customization or development if you run batch management PLANT level.
    Where plant level batch mgmt., the batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data
    And you can define independent number range for each plant.
    If planned at client level need to customize using the userexits avaliable.
    Message was edited by:
            Pavan Kodali

  • Define Number Range for Reference Number

    Hi all,
    I am trying to maintain Different Number ranges for Loans in ESS.
    Once i maintain Define Number Range for Reference Number in Loans ESS and trying to raise a new loan from ESS is till see that the ref number is still displayed 0 while raising the New Loan.
    No        From Number       To Number
    10       
    I maintained range for number range number 10.
    Pls suggest me on this.
    The above scenario works for claims but not for Loans
    Regards
    Vijay

    Solved my self...!

  • Any FM for create an external number range for equipment number ????

    Hi all,
    Any FM for create an external number range for equipment number??????
    thanks & regards
    indu.

    Hi
    you can use below FM to get number range
       CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = 'Z1'
         object                        = 'ZTEST'
         object                        = 'ZFIREC'
         quantity                      = '1'
         subobject                     = p_compcd
         toyear                        = p_fisc
       IMPORTING
         number                        = v_seqno.
    thanks & regards,
    bhupal.

  • External number range for equipment number

    Hi All,
              How to maintain external number range for equipment number?( t-code IE01)
    Thanks in advance,
    Soumyendu

    Dear ,
    Go to...
    spro -
    pm/cs -
    master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
    Regards,
    Ishwar

  • Alphanumeric Number Range For Serial Number

    Hi Friends
    How can i use alpha-numeric number range for serial numbers.I am using serial number profile For  GR Process
    Regards
    Vivek

    Hi,
    You may check link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/3c/abc157413911d1893d0000e8323c4f/frameset.htm
    Ramesh

  • Number Range for MIRO number

    Hi , We are using Park and Post functionality for invoice verification.
    The number range (Logistics ) defined for RD (Post invoice ) and RS (Cancel Invoice) is 01.
    The Number intervals defined for number range 01 are
    Number    Year         From                         TO                           Current number
    Range
    01     9999     5105600101     5105699999     5105603042
    But surprizingly when we do MIR7 (Park document ) , current number gets increased by 10 , instead of single.
    For example , earlier the current number here (in spro) was 5105603030. I created a MIR7 document, the number given to me in MIR7 was 5105603029 and system didn't change current number in spro.
    I created the another document , the number given to me in MIR7 was 5105603030 and system didn;t change the current number in SPRO this time also.
    BUT WHEN I CREATED a another document in MIR7 , number given to me was 5105603031 but current number (in SPRO) was changed to 5105603040.
    I am not sure , why it is changing CURRENT number with interval of 10 ??
    Need yr help
    Regards
    Shrey

    hi,
    Please check the custumized settings for MIR7, may be u have given in reverse order and the interval between two documents may be 10. please go through the accounting document number ranges.
    Thanks & Regards
    Swathi

  • NUMBER RANGE for batches

    Hello friends,
    My client requirement is he wants to give his own batch number range  alphanumeric for materials like AF86811.
    Where do I customize for this.?
    What are steps I have to do?
    Please clarify my doubt.
    regards,
    Sekhar_functional consultant.

    Discuss with your ABAP consultant and check whether you could use user exits to meet your requirement: userexit_number_range in the program MV45AFZZ

  • Number range for serial Number in production order

    Hi all,
                I want to use the Serial Number in production Order ... It should be generated automatically ... when i try this system creating the serial number from 1.....i want the number to start from 2000000 , How to configure this number range ....
    Please advise me ...
    Regards,
    kumar

    Dear
    Following steps are required in Serial Number Management :
    1. OIS2 or Go to path SPRO > Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > Serial Number Management > Define Serial Number Profiles. There enter "2" in Stkck column for your serial profile.
    2.SPRO->SAP Customizing Implementation Guide->Plant Maintenance and Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories->Define Number Ranges
    3. IQ01 Create Serial Number
    4. MM02 You need to add the above created Serial Number Profile in the Material Master ion the work scheduling view .
    5. CO02 Assigning the Serial Number through Production Order,
    Also Serial Number can be created automatically by clicking on u201CCreate Serial Number Automaticallyu201D , Release the Order
    6. MB31 Do the GR for the above created Production Order and Check in MMBE for serial Numbers
    Try and check
    Regards
    JH
    Edited by: Jiaul Haque on Nov 22, 2010 7:43 AM

  • MIGO -Number range for trans./event type WE in year 2012 does not exist

    Hi  to all
    i got one erro while  going do MIGO , error is  
    Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is  WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
    Error Details :
    Number range for trans./event type WE in yar 2012 does not exist
    Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
    Procedure
    Contact your system administrator.
    If you are authorized to do so, do you want to check the number ranges for the
    u2022     Material documents
    u2022     Reservations?
    Thanks in Advance
    Rajesh

    Hi Tej,
    Even I am getting the same error
    "number range for trans./event type WE in year 2014 does not exist"
    I have maintained the below number range in tcode OMBT,
    Am I missing anything?? Please help!!

  • Number range for trans./event type WA in year 2010 does not exist

    Dear Sir,
    when i used t-code mb1c to initiate the stock, it occured this error message 'Number range for trans./event type WA in year 2010 does not exist'. i've used t-codes(OBMT,FBN1,OBH2), but it still doesn't work. can you tell me how to solve this problem, please?  thanks! the detail error messages as below:
    Number range for trans./event type WA in year 2010 does not exist
    Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2010 for the transaction/event type WA.
    Procedure
    Contact your system administrator.
    If you are authorized to do so, do you want to check the number ranges for the
    Material documents
    Reservations?

    Follow the below instruction as specified in note 370236.
    Maintain the number range intervals in Transaction OMBT or in Transaction SNUM.  For every interval of the previous year, there should exist an interval with a year specification that is larger than or equal to the current year.Then assign the interval to a number range group.
    The attached analysis report 'ZNRIVCHECK' carries out the following check:
    If the year and the document type are entered, the report checks whether an interval exists for the document type and for the year.
    If the year is entered or the year and the number range object are entered, the program checks whether the intervals of the previous years exist for all of the year-dependent objects in the specified year.Check whether intervals are needed for all entries of the results list and whether the interval was assigned to the number range groups.
    thanks
    G. Lakshmipathi

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

  • How can I setup different number range for each company code?

    Dear GURU,
         Is it possible to setup different number range for material document by company code? If yes, what should i do.
         Thank you in advance.
    Thammarit

    Hi,
    you maintain the number assignment for the following documents:
    material documents
    physical inventory documents
    The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
    The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
    Caution: Change in the Fiscal Year
    If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
    Example:
    Interval for 1995: 4900000000 to 4999999999 status: 4900451234
    Interval for 1996: 4900000000 to 4999999999 status: 4900000000
    If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
    In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
    Physical inventory documents
    Number range interval from 0100000000 to 0199999999
    This group contains the following transaction/event types:
    - IB Physical inventory documents
    - ID Physical inventory documents for counts and differences
    without reference
    - IN Physical inventory documents for recounts
    - IZ Physical inventory documents for count without reference
    - WV Physical inventory documents for difference postings in the WM System
    Material documents for goods movements and inventory differences
    Number range interval from 4900000000 to 4999999999
    This group contains the following transaction/event types:
    - WA Goods issues, transfer postings, other goods receipts
    - WH Goods movements for handling units (HU)
    - WI Material documents for inventory adjustment postings
    - WL Goods issues for delivery documents (SD)
    - WQ Goods movements for usage decisions (QM)
    - WR Goods movements for completion confirmations (PP)
    - WS Goods movements for run schedule headers (PP)
    - WZ Documents for batch status changes
    Material documents for goods receipts
    Number range interval from 5000000000 to 5999999999
    This group contains the following transaction/event types:
    - WE Goods receipts for purchase orders
    - WF Goods receipts for production orders
    - WO Subsequent adjustment of subcontract orders
    - WW Subsequent adjustment of active ingredient materials
    Inventory sampling numbers
    Number range interval from 0200000000 to 0299999999
    This group contains the transaction/event type SI.
    SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
    Note
    For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
    Actions
    Check whether you can use the predefined groups and number intervals.
    If you want to change any groups, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select the transaction/event type that you want to re-allocate.
    c) Place the cursor on the new group and choose Edit -> Assign element group).
    d) Save your settings.
    If you want to define new groups, proceed as follows:
    a) Select Group -> Maintain.
    b) Then select Group -> Insert.
    c) Enter a text for the number range group.
    d) Maintain the number interval for this number range group.
    e) Allocate the transaction/event types to the number range groups (see step 2).
    If you want to maintain new number range intervals for an existing group, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select a group and choose Interval -> Maintain.
    c) Choose Edit -> Insert year.
    d) Maintain the number interval for the new fiscal year.
    If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
    Note on transport
    You transport number range objects as follows:
    In the initial screen, choose Interval -> Transport.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    Thanks and regards
    Rajesh

  • Same number range for two different series groups?

    Dear all,
    There are two scenarios
    1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
    2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
    But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case)  as per excise legal requirement
    Ie running number is for series group 20 is 300016
    For the above deemed exp case (second scenario)it should pickup 300017
    And again when they do under bond case(first scenario), it should pick up 300018 like that
    Is it possible to maintain the same number range for two different series groups(20 and 30)?
    Even if you maintain the same number range for 30, as per running number range of 20
    Will the system update simultaneously the same number range for 20 and 30 series groups?
    Please suggest the way.

    With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
    Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
    Regards,
    Aroop

  • Different Number range for different objects

    HI Gurus
    Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
    Your early Advise will be appreciated.
    Thanks
    Chandra

    Hi Chandra,
    SM31 -> T77IV : 01S -> Number Range Maintenance.
    (or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
    For the subgroups
    01C (plan variant 01, Object type C) Job
    01O (plan variant 01, Object type O) Org unit
    01S (plan variant 01, Object type S) Position
    Define the following number ranges respectively.
    (EX 60000000 69999999)
    (EX 70000000 79999999)
    (EX 80000000 89999999)
    Regards,
    Dilek

Maybe you are looking for