External w3d file not loading once in the server

Hi,
i have my director file that loads external files in w3d
format, but they are not loading once i upload them in the server,
they load on my local computer, but they stop loading once in
the server,
I have done some research, and I found out that there have to
be some 'correct mime types' you can read this thread here:
http://director-online.com/forums/read.php?3,19629
my question is: How do I change these mime types in the
server? or what should i do to make my w3d files load?

Hi,
First check your extension names it most be ".w3d" and not
".W3D" or ".w3D". Second your shockwave 3d files must to be on a
folder called "dswMedia" for security reasons on the server. Any
external file you need for your movie online most to be there.
At last, before you send any command to your loaded .w3d file
inside your movie be shure to check it´s member estate, if you
tray to do something with it and isn´t ready this generate
problems or simply does nothing halting your movie.
Have a nice day.

Similar Messages

  • XML file not loading in FF from server

    I've created a web page that loads an external XML file and
    then uses javascript code to parse the file for requested
    information. I know it's not the best way to do this, but I'm
    trying to get this working before I move on to "better" methods.
    When I run the page using the "Preview/Debug in browser"
    funtionality of DW everything works great both in IE and FF. But
    when I load the page to the server and then load the page in a
    browser, it works in IE but not in FF. It looks as though FF is
    just not loading the XML file. I can't figure out why the page
    would work if launched from DW, but not work if the page is loaded
    on the server and then run from there, and only in FF.
    The code I'm using to load the XML file is supposed to be
    cross-browser compatible. I've seen many versions like from various
    sources, so it should be OK. I'm pretty new to all of this so I'm
    hoping that I'm just missing something simple. Does anyone have any
    idea why this is behaving this way?
    Thanks for any help.

    so, in frame 1 of your fla before you execute that cross-domain load method, use:
    System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
    where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="all"/>
    </cross-domain-policy>
    and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
      <allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
    </cross-domain-policy>

  • External javascript file not loaded

    Hi I am beginner with jquery ; I am following through with a tutorial;
    I have javascript file called default.aspx.js in the Scripts folder
    /// <reference path="jquery-1.4.1-vsdoc.js" />
    $(function() {
    $("div").click(function() {
    alert('');
    my webform is:
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="javascriptweb.WebForm1" %>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title></title>
    <script src="Scripts/jquery-2.0.3.min.js" type="text/javascript"></script>
    <script src="Scripts/default.aspx.js" type="text/javascript"></script>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    Div #1
    </div>
    <div>
    Div #2
    </div>
    </form>
    </body>
    </html>
    nothing happens when I click the div;
    i also tried to make the javascript file just call alert upon  documnet ready but it did not work either
    any help will be most appreciated;
    i am using  google chrome 

    Hi,
    Thank you for posting in the MSDN forum.
    I’m afraid that it is not the correct forum for this issue, since this forum is to discuss the VS testing issue.
    Happy to see this issue has been resolved. For further research,
    I suggest that you can consult your issue on ASP.NET forum: http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

    Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

    Hi
    Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
    WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
    I don't think there is any solution to this AT ALL.
    When You format a hard disk.
    • Select Partitions
    • Under the graphic representation to the left there is an Alternative button
    Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
    No other possibilities.
    Yours Bengt W

  • I am getting a photoshop error could not load photoshop because the preferences file was invalid and cln't load actions because of an unexpected end of file encountered.

    I am getting a photoshop error could not load photoshop because the preferences file was invalid and cln't load actions because of an unexpected end of file encountered.

    Are you trying to open Photoshop directly, or open it by double clicking on a Photoshop document, like a PSD file?  If the former, then you might need to reinstall.  Resetting Preferences would be the firs step, but I am not sure if that will work if Photoshop is not opening in the first place.
    Try doing so anyway.  Hold down Shift Alt Ctrl (Shift Opt Cmd) while opening Photoshop. OK the message to delete Preferences.
    If you get the unexpected end of file error while trying to open Photoshop via a PSD document, then there is more than a good chance that that file is toast.
    If still stuck, we need to know Operating System, and Photoshop version.

  • Safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

    safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

    the webkit2webprocess.exe has something to do with the sound. Safari works fine for me, except for the occasional time when the webkit2webprocess.exe crashes. Sometimes it crashes Safari altogether but sometimes it just reloads all the tabs I have opened. Either way, it's a huge pain. I hope they fix it with an update soon.

  • External swf file not using URLRequest

    Good morning guys.
    You can load an external swf file not using URLRequest? Since embed html code is setted as <param value="never" name="allowscriptaccess"/>
    I have this problem and I need to load a swf skin
    thank you

    are you loading a swf (done during runtime) or importing one (done during authortime)?
    in either case, the allowscriptaccess parameter of the external swf (that your loading or importing) is irrelevant.  allowscriptaccess is assigned in the main (loading or importing) swf's embedding html page and is used to control html/js access of the main and loaded swfs.
    if you trust the swf you're loading, you can change allowscriptacess to always.  if you're importing a swf, none of its actionscript will execute anyway so it doesn't matter whether its trusted or not.

  • Trouble getting QuickTime to run on Windows 7. Error 46: Could not load or find the Quick Time Active X control.

    Trouble getting QuickTime to run on Windows 7.Installation seems to finish successfully. When can try to open it I get the following error message:
    Error 46: Could not load or find the Quick Time Active X control.  I have reinstalled QuickTime and itunes several times but with no luck. Any suggestions?

    Hi Pedro d,
    Yes but no! I have tried everything step by step several times. Researching Error 46 on the web is scary business!! The gangsters are out in force on this one, begging to take your money! From a couple of trusted sites I have been able to make this much clear at least for Vista users, I'm using Windows 7 but I think they relate:
    "Since the issue causing the Error 46 is that QuickTime registry entries don't have the correct permissions set, the repair is to go and reset all the incorrect permissions. However, this is a long and tedious process. The SubInACL tool from Microsoft (see the link in Resources) can change the permissions as a batch. The batch is defined by a CMD file that lists all of the registry keys to be changed. Once SubInACL is installed on your computer, move the CMD file with all the registry changes into the same folder, typically C:\Program Files\Windows Resource Kits\Tools. Right-click the CMD file, choose "Properties," check "Run this Program in Compatibility Mode" and select "Windows Vista (Service Pack 2)" from the drop-down menu. Click "OK." Do the same for SubInACL. When you're done, double-click on the CMD file and it will run. Your error should be gone."
    I don't have the expertise to do this, do you? I wish that Apple or someone would take the bull by the horns and fix this because what I've read their are a lot of people having this problem. Any thoughts on this matter would be greatly appreciated.
    Kindly,
    pappy01545

  • External Drive Files Not Showing Up on Mac but files do shows Up on PC

    External Drive Files Not Showing Up on Mac but files do shows Up on PC
    i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

    yes. i did.
    ...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

  • Xml file not loading from different server

    Hi,
    I have a simple flash banner that is pulling a number from an xml file on a different server. When it gets to the frame where the number should be it just says "transferring data from eckul.com" and will not actually pull in the number. Unfortunately I can't put the files on the same servers. Any help would be much appreciated, below are the links and the xml code I'm using followed by the action script. Cheers
    http://www.sainters.net/newsletters/2010/flash_test_membership2.html
    http://www.eckul.com/number.xml
    <?xml version="1.0"?>
    <inventors>
        <person>
            <name>892</name>
            </inventors>
    function loadXML(loaded) {
    if (loaded) {
    _root.inventor = this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
    _root.comments = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
    name_txt.text = _root.inventor;
    comment_txt.text = _root.comments;
    } else {
      trace("file not loaded!");
    xmlData = new XML();
    xmlData.ignoreWhite = true;
    xmlData.onLoad = loadXML;
    xmlData.load("http://www.eckul.com/number.xml");

    so, in frame 1 of your fla before you execute that cross-domain load method, use:
    System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
    where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="all"/>
    </cross-domain-policy>
    and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
      <allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
    </cross-domain-policy>

  • HT4623 I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store and Safari keeps crashing

    I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
    Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?

    Libellen wrote:
    I updated my Iphone 5s with IOS 7.0.5
    The Update would not have Installed if it was not suitable for your Device.
    Libellen wrote:
    ...  anyhowe the phone is now totaly "dead" and will not turn on
    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Troubles with xmp files not loading...

    I'm having troubles with xmp files not loading with images but are present in the image folders. does anyone know why this is happening and if there is a way to fix this. Also when trying to load the xmp individually they are grayed out and unable to load. I have tried this on different machines (Macs) and still no luck. Any help would be greatly appreciated in this issue.

    > The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
    Aww, yuck!! That's a real drag...
    When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
    So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
    I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
    Guess I won't be using DNG any more..
    Thanks for the help Kees :-)
    Russell

  • In version 31.2.0 have error in console " Error: Please do not load stuff in the multimessage browser directly" is this causing poor performance?

    Windows 8.1
    Error message at startup
    Timestamp: 26/11/2014 21:33:29
    Error: Please do not load stuff in the multimessage browser directly, use the SummaryFrameManager instead.
    Source File: resource://gre/modules/summaryFrameManager.js
    Line: 85
    What does this mean?

    If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced.  You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
    Ciao.

  • SWF files not loading onto page in Catalyst output.

    Hello,
    This is a new one that I have not yet seen.  I have a large assortment of SWF files set up in Scroll Panes and they are not loading up when I check the project using Firefox or Safari.  The site is here:
    www.electronic-lifestyle.com
    Go into any page linked from the top row and then hit a sub page.  When you see a scroll bar come up on the right side of the film strip yet nothing inside the film strip you will see the issue.
    This is really serious and could screw up my entire project so any advice would be really helpful.  I need to figure out why the SWF files are not loading in on the browser with the files from the server when they work just fine using the local deploy files.  Everything works just fine from the machine but when I try to get it to download from the server nothing.
    All of the SWF files are built in Flash CS5 using AS3 and contain some simple links and commands.  Some of the SWF files are coming up just fine, it is just the latest batch of files I have uploaded that are giving me the problem, but only off the server.  The same files work just fine in local mode.
    Thanks in advance,
    Brett

    Chris,
    This is not an apples to apples comparison but I think it will Illustrate the differences.  This is a sample of code from Catalyst that works:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Group xmlns:s="library://ns.adobe.com/flex/spark" xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:fclib="com.adobe.flashcatalyst.components.*" xmlns:d="http://ns.adobe.com/fxg/2008/dt">
        <fx:Script>
            <![CDATA[
                protected function mac_btn_clickHandler():void
                    navigateToURL( new URLRequest( encodeURI("http://www.mcintoshlabs.com")), "_blank");
                protected function integra_btn_clickHandler():void
                    navigateToURL( new URLRequest( encodeURI("http://www.integrahometheaters.com")), "_blank");
            ]]>
        </fx:Script>
        <fclib:SWFController loadForCompatibility="true" source="assets/images/ElectronicMain2c.swf" x="0"/>
        <s:Button skinClass="components.Button1" x="0" y="1328" d:userLabel="Mac_btn" click="mac_btn_clickHandler()"/>
        <s:Button skinClass="components.Button1" label="Button" x="0" y="1768" d:userLabel="Integra_btn" click="integra_btn_clickHandler()"/>
    </s:Group>
    This is an example of the AS3 code that was confounding the SWF load on the example I gave:
    button_1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage);
    function fl_ClickToGoToWebPage(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.mcintoshlabs.com"), "_blank");
    button_2.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage_2);
    function fl_ClickToGoToWebPage_2(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.integrahometheater.com/"), "_blank");
    Now these are from the same page, the first of which is online right now here:
    www.electronic-lifestyle.com/AS/Main.html
    This particular code is used on the Electronics page.  When I look at the two side by side it seems there are some syntax differences but I do not know enough about AS3 to tell what the important differences are.
    Thanks for looking,
    Brett

  • Imported Jar file not loaded at run time ORA-105100

    Oracle 9iDS forms Version 9.0.2.9.0
    Oracle 9iAS Release 2
    I have imported java classes from a jar file into my form. I have it working in client server. Added the entries to the classpath in the default.env and system environment variable for development of the form and for execution.
    Moved the jar file, form and testing html to the application server. Modified the classpath in the default.env file. Tested the form. Got the ORA-105100 error. MetaLink note 261650.1 states that error frm-40735 When-Button-Pressed triger raised exception ORA-105100 if calling a java function from a jar file. Cause: Jar file not loaded at run time. Solution: add in your default.env CLASSPATH parameter your jar file including the whole directory of the jar file location. That has been done and the OC4J has been restarted. Still get error.
    Oracle support has not been able to give me much help as of yet. Does anyone have any further ideas, or documentation that I can read to help get this working?
    Thanks in advance for any assistance that is offered.

    Hey people any clues?

Maybe you are looking for