Extproc32 recompile. maybe. need help.
I have 64bit Oracle 10.2 linux.
I need to use extproc32 to run some external procs compiled as 32bit.
When I try to run extproc32, the program complains that libagtsh.so is 64bit.
I looked at my LD_LIBRARY_PATH and they are pointing to the right location.
However, I did a string extproc32 | grep lib and found this:
==============
Unix> strings extproc32 | grep lib
/lib/ld-linux.so.2
libagtsh.so
libpthread.so.0
libclntsh.so.10.1
libdl.so.2
libm.so.6
libnsl.so.1
libc.so.6
__libc_start_main
/home/oracle/oracle/product/10.2.0/db_1/lib
===============
It's the last line that concerns me. db_1/lib is the 64bit. The last line should have the value:
/home/oracle/oracle/product/10.2.0/db_1/lib32
I believe this is my problem. That look right?
So, I look at my $ORACLE_HOME/install/make.log to see if there's any other clues. And I find the following:
gcc -m32 -o /home/oracle/oracle/product/10.2.0/db_1/rdbms/lib/extproc32 -L/home/oracle/oracle/product/10.2.0/db_1/rdbms/lib32/ -L/home/oracle/oracle/product/10.2.0/db_1/lib32/ -L/home/oracle/oracle/product/10.2.0/db_1/lib32/stubs/ /home/oracle/oracle/product/10.2.0/db_1/rdbms/lib32/hormc.o /home/oracle/oracle/product/10.2.0/db_1/rdbms/lib32/defopt.o /home/oracle/oracle/product/10.2.0/db_1/rdbms/lib32/homts.o -lagtsh -lpls10 -lplp10 -lpthread -lclntsh -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 /home/oracle/oracle/product/10.2.0/db_1/lib32/libgeneric10.a `cat /home/oracle/oracle/product/10.2.0/db_1/lib32/sysliblist` -Wl,-rpath,/home/oracle/oracle/product/10.2.0/db_1/lib -lm `cat /home/oracle/oracle/product/10.2.0/db_1/lib32/sysliblist` -ldl -lm -L/home/oracle/oracle/product/10.2.0/db_1/lib -lvsn10
Can I just cut and past this command with the appropriate changes to the library paths? Even then, how do I know there aren't other 32 bit versions of programs that need to be changed?
I'd like to use the Oracle Universal Installer to fix this (If this is indeed the problem), but I'm not sure which thing to re-install. There's plenty of sub menus to choose from and navigating through them is a pain. Would anyone here know which component to pick?
thanks.
Hi user554561
Yes try this it should be working if not please give us the errors given from the command.
thanks
Similar Messages
-
HT201413 Complicated (maybe) need help!
I got a new iPod nano 7th generation, and I can't update the software to the device itself and don't know how to check what kind of connection I need, like where to go and what to look for. I had an iPod a few years ago and my new one won't sync to the music I already have. I had to create a new apple account on here since the old account's ID was an old e-mail that is no longer in use and that I can't get into the old apple account because I forgot all of the security questions.
Will I have to restore everything or do something that will erase the music I already have? I'm very confused and any help would be much appreciated.
I have the newest iTunes update already, and iTunes shows the device I have plugged in.Not sure what you are asking at all.
"don't know how to check what kind of connection I need,"
Connection for what?
No idea what you are trying to accomplish -
Need Help with Formula using SQL maybe
I need help! I work with Crystal reports XI and usually manage just fine with the Formula editor but his one I think will require some SQL and I am not good at that.
We are running SQL 2000 I think (Enterprise Manager 8.0) Our sales people schedule activities and enter notes for customer accounts. Each is stored in a separate table. I need to find activities that are scheduled 240 days into the future and show the most recent note that goes with the account for which that activity is scheduled.
The two tables, Activities and History, share the an accountID field in common that links them to the correct customer account. I want to look at dates in the Startdate.Activities field more than 240 days in the future and show the most recent note from the History table where the accountid's match. I figure my query will contain a join on AccountID.Activities and AccountID.History used with Max(completedate.History) but I do not understand how to word it.
I would like to perform all this in crystal if possible. I humbly request your help.
MemberyYou SQL would look something like this...
SELECT
a.AccountID,
a.BlahBlahBlah, -- Any other fields you want from the Activities table
h.LastComment
FROM Activities AS a
LEFT OUTER JOIN History AS h ON a.AccountID = h.AccountID
WHERE (a.ActivityDate BETWEEN GetDate() AND DateAdd(dd, 240, GetDate()))
AND h.HistoryID IN (
SELECT MAX(HistoryID)
FROM History
GROUP BY AccountID)
This method assumes that the History table has a HistoryID that increments up automatically each time a new comment is added... So a comment made today would always have a higher HistoryID that one made yesterday.
If I'm wrong and there is no HistoryID or the HistoryID doesn't increment in a chronological fashion, it can still be done but the code is a bit more complex.
HTH,
Jason -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
I need help switching back to iPhoto
In February of this year I switched from iPhoto to Aperture for very specific reasons. My laptop's hard drive was running out of space, as it was housing my photo library that was quickly approaching 25,000 photos and pushing about 30 Gigabytes, and I wanted to take advantage of Aperture's ability to store photo masters on an external drive.
So why switch back? When I described why I had switched and my experiences doing so back in February I had said that I ran into many problems all of which I was able to solve save two:
"The two things I have yet to solve, which are rather large things: 1) Spotlight can no longer find my photos since switching to [edit: from] iPhoto. I am really not sure where to start with fixing this so I think I’m just going to have to ask someone. 2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'. When I try to access the keywords that are “below” iPhoto Aperture freezes. Perhaps I have too many keywords (I do have an awful lot). I’m not sure how to solve this one yet either. Maybe there is a raw .plist file that I can manually edit (and I am willing to do so)." -- Me.
After using Aperture for the past 3+ months I've yet to resolve either of these issues. Recently there was an update to Aperture from Apple that, according to the documentation for the update, was supposed to help resolve my second issue with having too many keywords for Aperture to handle - but it hasn't helped much. So since switching to Aperture I've not tagged more than maybe fifty photos, which is discouraging because I know that once I switch back to iPhoto I'm going to be busy tagging photos again.
So I suppose you could say I'm switching back for two main reasons. First, I want it to be much easier to tag my photos since that is probably the single most important thing to me and the experience with iPhoto and Keyword Manager ( http://www.bullstorm.se/KeywordManager.php ) is far superior to that of using keywords in Aperture. Second, I want my photos to start showing up in Spotlight searches again. I'm more than willing to deal with the caveat, albeit a rather large one, that I won't have my photos with me wherever I go anywhere but that they'll forever reside on my firewire drive.
What I need help with...
When I open iPhoto I see all of the previews for the photos that I had the day I switched to Aperture. However, the originals have been moved by Aperture onto my firewire drive - so when I click on each photo all I get is a ( ! ) symbol. The previews still reference a file that does not exist yet the iPhoto database still retains all of the relevant metadata (date/time, keywords, comments, etc) that I had worked so hard to put into iPhoto. I need to retain this information and somehow get the originals back into place so that iPhoto sees them again.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be. 2) Move the entire library to my external firewire drive. 3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
Since I have Aperture store my photos by date - importing only the images that I've imported into Aperture should be a piece of cake. I do not need to retain any metadata from Aperture since I've only tagged a few photos in Aperture and all of the other information I may need should be on the original file (like date taken, etc.). I know I'm going to lose a lot of edits that I've done like cropping, rotating, color balancing, red-eye reduction, etc. but I'm more than willing to lose all of that if it means that I can pick up where I left off and get back into the swing of things in iPhoto.
I've Googled like crazy and haven't found someone doing exactly what I'm trying to accomplish so any help with my current situation is greatly appreciated. I've also posted this on my blog http://cdevroe.com/notes/back-to-iphoto/cvdevroe
2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'.
Bear with me, my terminology may not be right. I'm heading in the opposite direction, and one of the advantages i see to Aperture is that I've got the same advantages in Keyword management as I have with KM in iPhoto.
Have you tried re-organising them using the control bar: Below the thumbs there's a drop down menu, by default it shows Photo Descriptors. Click on it and Select 'Edit Buttons'. You can merrily re-organise your Keywords in this window, and even have your changes reflected in live in the HUD.
As to the Spotlight searching, I'm afraid someone else will need to help on that one. Personally - and it's a regular on the iPhoto forums - I've never had much luck getting Spotlight to search within iPhoto for keywords, apart, of course, from using the search window in the iPhoto Window. I suspect a system-based search of iPhoto keywords is simply not possible.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be.
That will work, but they'll need to be exactly as they were.
2) Move the entire library to my external firewire drive.
Easily done, after you've copied it over launch iPhoto holding down the option (or alt) key and choose 'Locate'. Navigate to the new location and that''ll be your default iPhoto Library Folder thereafter.
3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
That should work too.
But the key is, can you return the iPhoto Library Folder exactly as it was, otherwise you'll need to create and populate a new library - and that will inevitable mean losing your keywords in iPhoto too.
FWIW, I need to keep iPhoto going for others in the household who are daunted by Aperture. My solution is a referenced library pointing towards the iPhoto Library Folder / Originals folder.
Regards
TD -
Need Help Putting Together a rMBP so I Have Everything I Need...
Hello-
I am having trouble getting the right kind of help from "Chat Now" on apple.com and calling in to get my questions/needs taken care of so that when I get the rMBP I will be sure I wil have what I need to go right online and teach the online courses. I even went to the local apple store and woked with a couple sames guys there, but they were not clear in a couple situations on what I would need with the different options the rMBP gives. so I am truning to the great apple forum for additional help. this might be too much to ask even for tis forum, but if I can learn a little at a time, maybe I can gradually gain the knowledge I need to have a complete and functioning home office for my personal computing needs and my needs as an online teacher at a university back East. My technical knowledge is not the best, so as far as the rMBP goes, a big problem for me is that I do not have the knowledge to make sure I order everything I need with the changes a new rMBP will bring to my current setup (which is just a basic MBP using a wireless router and a USB cable for the printer that I just connect when I need to print). I realizee my current set up on my desk is not the most advanced, but I would need a pro to come to my office and help me get the best set-up for what I am curently using. It seems that the agents I chat with and/or talk to on the phone are aslo lacking in knowledge to help me put together a rMBP that will be ready to fully use and have with the order all that I need so that I do not have to order additional items in a mad rush to be ready for the courses I am teaching online. I have read several articles about the rMBP so that I cold have some knowledge about what I will need but as I said my techie knowledge is lacking. I am looking at the 15" rMBP with all of the full upgrades that the configure option allows one to get. I am not clear if I do run into trouble with my wi fi and have to use my ethernet cable what I will need to do this. I also have programs that are older that I am guesing I will need to install using a DVD player. I would like to hook up the printer I have or a new Canon printer and use it wirelessly, but for now I will most likely be using it with a USB cable. I am not clear on the thunderbolt technology and if I should get any of these cables for any of the connections. I also would like to get a great speaker system and will need to hook that up, but I am not clear on the best way to do this. I have been wanting an iMac, but I am not sure what is a good slection to get and how to connect it to the rMBP or one of the other 2 older MBPs I currently have.
If somebody could list for me what I would need to have a complete rMBP that will allow me to do these hookups and connections and explain what would be the best way to complete the various connections so that I have all that I will need to get up and running, I would really appreciate it. Because I do not have any USB 3.0 cables or cables for various additional connections, I would need help/suggestions in this area. I realize this is hard to do not seeing my office, but since I will be starting new with the purchase of the new rMBP and hopefully an iMac (and a new Canon printer and new set of great sounding speakers) getting some advice on what I should order for the various connections would be a hugh help. Part of the problem is with the rMBP and not having used one of these in the past. I know some of the differences with this machine like the lack of an internal SuperDrive and the new ports, but I do not know what cables I will need that will utilize the newer technology this machine and an imac will bring to my office.
Any suggestions are greatly appreciated, even if you do not give me specific answers, but an idea, for example, of what I might need to connect the speaker system (knowing the best way the new speaker system shold be connected to the rMBP and/or the iMac. I am not even clear if I do want to use the iMac with the rMBP for teaching with a larger display what I will need to connect the imac to the rMBP. is this done by an HDMI cable and if so is there a specific type or example you could mention that is on apple.com?There are many differences with the new rMBP. There are ports that I am not sure what I would use them for. Even the ethernet cable I use now to get the internet will not work with the rMBP. I thought there would be some additional help on here. as far as configuring the rMBP there are just a few options but the differences between an older MBP and the new rMBP is great. No need to reply I will turn off email notifications. I gave as much information as I did because in the past I was told to give more information.
-
I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?
No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that. -
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b -
I need help with an older MacBookPro version 10.5.8
It was made in 2006...I recently bought it thru Craigslist and I need to figure out why the built in camera is not able to turn on.I tried alot of different things already as suggested ,like clicking on the IChat icon but even the IChat is not responding...I keep getting IChat quit unexpectedly message each time....Please help anyone I need other suggestions.Theres also no photo booth icon in the dock or when I searched,so Iam assuming the previous owner deleted it maybe....I need help on this.
<Email Edited By Host>Hi,
This is the Messages Beta forum, about the app that can only be installed on Lion.
Anyhow.
Trouble Shooting an iSight
Basically follow the steps and then do a SMC/PMU reset
8:24 PM Friday; March 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
on my ipod, how can i unredeem an itunes gift card because i had to do these security questions i forgot the answers to. I NEED HELP!!!!!!!!
Maybe:
How to manage unused iTunes Gift Card and Gift Certificate balances
Have you tried this to try to reset the security questions.
See Kappy's previous discussion.
HT5312 How to recover security...: Apple Support Communities
Contact iTunes by:
Contact iTunes -
My apple id doesnt work (it wont let me log in) i need help
The main reason i need to log into my apple id is because i bought a $50 itunes giftcard that i wanted to buy music with. The problem with this is that when i went to go buy music on itunes, it told me i needed to verify my account by answering my security questions. I didnt remember my answers so i went on apple's website to log in and get my answers through my recovery email. This is the start of the problem. The email that showed up was a yahoo account, but it didnt show the full address which didnt help at all. I didnt recieve the email, so i decided maybe changing my other backup emails would change the recovery email which i now realize didnt do anything. I looked up help because i was really frustrated i couldnt use the giftcard until i resolved this issue, and i read maybe changing my main email to a backup one would help for whatver reason. And i did that, and when i went to verify it it said that the email was no longer associated with the account. I tried logging back in and it said either my email or my password was incorrect, and i have officially given up by now. I tried the iforgot and used my first and last name and current email and it said nothing was found. So i made another apple id with the same username and password thinking maybe the money would transfer over but it didnt. I changed the email now so that i could use my original email to get the account back, but when i try logging in with the old account nothing happens. im really frustrated and need help fixing this issue i know this is a big mess but hopefully someone can help me out haha.
*i really want this account saved because i am not spending another $50 on an itunes giftcard.Probably not, just tell them you can't use the account and follow along.
-
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
RSI Issue: Need help on IBM/Lenovo external keyboards w Trackpoint? Pic
Need help on IBM/Lenovo external keyboards w Trackpoint? Pic
I started my journey with Thinkpads on a T42, then T43.. then T61, X61T, R61 & T410 (bought for 2 cousins & they love it), W510 (dads new laptop). I may be a much recent convert but I swear by them now.
MAJOR ISSUE: Recently started feeling RSI (Repetitive Stress) & Carpal Tunnel symptoms (already doing stretches.. adjusted the desk.. & finding new adjustable LCD stand) since I am not using the Thinkpad directly... but using it docked with an External keyboard. Lot of Mousing as well. I'd like to go back to Thinkpad FEEL... or atleast have keyboard with a pointing device so my hands dont have to keep moving back n forth.
So, it would be great it some of my fellow T4x/T6x/X6x 'ers would guide me a bit on this... share their first hand experience, or what they've seen on these keyboards and feel free to point me to reliable sources of information.
Currently this would greatly be use with T61 - Adv Mini Dock - 30" XHD3000 LCD as shown in my signature below.
Anyone who has used or know something about one of these Thinkpad related keyboard (ideally both of these to give a comparative response).
Which of the following have you used?
How was the experience?
(Maybe point me to thread with peoples experiences)
If you've used several, which one do you prefer / recommend? Why?
At the moment I have a "slim" BTC 6200C desktop keyboard. It has laptop like scissor keyswitches, so I like it the slim notebook like profile.
The way I have positioned my 30" LCD I'd like to be able to keep the keyboard on my lap at times while on my chair and maybe on the desk at times.
ThinkPad Full-Size UltraNav USB Keyboard
The keyboard and trackpad of the IBM Lenovo Thinkplus USB Keyboard with Ultranav:
ThinkPad Travel UltraNav USB Keyboard
The travel version of the above:
Newer:
ThinkPad USB Keyboard with TrackPoint
A 2009 replacement for the previous one but not the full keyboard nor wireless:
Thinkpads:
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP
Dell:
Inspiron 9300: 17"WUXGA/NVidiaGeForce6800/2.2PM/2G/XP (old)I had the same issue - had to go to voice command for a few weeks (sucked) wore wrist gards to keep things netural.
Everything went away when I changed to a USB keyboard with the Ultra nav (I use the track point and disable the pad).
I've been working like that for 6+ years now... no issues.
(as a side note, sleeping with wrist guards on helped heal me the fastest. I had neoprine, with a metal plate in them - from a local drug store) -
My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)
-
Can't Figure This Out....Need Help.
I am attempting to add a line score from a minor league
baseball team to a website of mine (it's an actual "in progrss"
line score that updates itself). It looks like it uses a feed of
somesort with a page refresher, but I can not identify what it is
from looking at the source code.
The format I really want looks like this website:
http://web.minorleaguebaseball.com/clubs/ip_index.jsp?sid=milb&cid=t525
However, I would be more than happy to get something that
looks like the line score from this website (on the right above the
standings):
http://www.clippersbaseball.com/
Any insight would be appreciated. Thanks in advance.
MCyou might want to explain what your problem is in the title
of your post. a lot of people don't even look at ones that say
something like "need help" without any explanation of what the
actual problem is.
that being said, from what i can tell from the code of those
pages, it looks they created some kind of database or something for
those stats thingies. which means it's probably not something that
you can just copy and implement on your own site. you might have to
create your own database.
but maybe someone else will have some ideas. again, you might
want to repost or change the name of this thread, if that's
possible. i doubt you'll get many more responses to this
one. -
Need help with my addressbook program
hi,
i need help with my program here. this one should works as:
- saves user input into a txt file
- displays name of the saved person on the jlist whenever i run the program
- displays info about the person when clicked via textboxes given by reading the txt file where the user inputs are
- should scroll when the list exceeds the listbox
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import javax.swing.JList;
import java.awt.event.ActionListener;
import java.io.*;
import javax.swing.event.*;
import java.io.FilterInputStream;
public class AddressList extends JPanel implements ActionListener
JTextField txt1 = new JTextField();
JTextField txt2 = new JTextField();
JTextField txt3 = new JTextField();
DefaultListModel mdl = new DefaultListModel();
JList list = new JList();
JScrollPane listScroller = new JScrollPane(list);
ListSelectionModel listSelectionModel;
File fob = new File("Address3.txt");
String name;
char[] chars;
public void ListDisplay()
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
if(fob.exists())
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '*')
mdl.addElement(name);
list.setModel(mdl);
if(chars[0] == '#')
continue;
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
public AddressList()
this.setLayout(null);
listSelectionModel = list.getSelectionModel();
listSelectionModel.addListSelectionListener(new ListInfo());
list.setBounds(10,40,330,270);
listScroller.setBounds(320,40,20,100);
add(list);
add(listScroller);
JLabel lbl4 = new JLabel("Name: ");
lbl4.setBounds(400,10,80,30);
add(lbl4);
JLabel lbl5 = new JLabel("Cellphone #: ");
lbl5.setBounds(400,50,80,30);
add(lbl5);
JLabel lbl6 = new JLabel("Address: ");
lbl6.setBounds(400,90,80,30);
add(lbl6);
JLabel lbl7 = new JLabel("List ");
lbl7.setBounds(10,10,100,30);
add(lbl7);
txt1.setBounds(480,10,200,30);
add(txt1);
txt2.setBounds(480,50,200,30);
add(txt2);
txt3.setBounds(480,90,200,30);
add(txt3);
JButton btn1 = new JButton("Add");
btn1.setBounds(480,130,100,30);
btn1.addActionListener(this);
btn1.setActionCommand("Add");
add(btn1);
JButton btn2 = new JButton("Save");
btn2.setBounds(480,170,100,30);
btn2.addActionListener(this);
btn2.setActionCommand("Save");
add(btn2);
JButton btn3 = new JButton("Cancel");
btn3.setBounds(480,210,100,30);
btn3.addActionListener(this);
btn3.setActionCommand("Cancel");
add(btn3);
JButton btn4 = new JButton("Close");
btn4.setBounds(480,250,100,30);
btn4.addActionListener(this);
btn4.setActionCommand("Close");
add(btn4);
public static void main(String[]args)
JFrame frm = new JFrame("Address List");
AddressList panel = new AddressList();
frm.getContentPane().add(panel,"Center");
frm.setSize(700,350);
frm.setVisible(true);
panel.ListDisplay();
public void actionPerformed(ActionEvent e)
String cmd;
cmd = e.getActionCommand();
if(cmd.equals("Add"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Save"))
mdl.addElement(txt1.getText());
list.setModel(mdl);
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
rand.seek(fob.length());
rand.writeBytes("* " + txt1.getText());
rand.writeBytes("\r\n" + "# " + txt2.getText());
rand.writeBytes("\r\n" + "# " + txt3.getText() + "\r\n");
else
System.out.println("No such file..");
txt1.setText("");
txt2.setText("");
txt3.setText("");
catch(IOException a)
System.out.println(a.getMessage());
else if(cmd.equals("Cancel"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Close"))
System.exit(0);
class ListInfo implements ListSelectionListener
public void valueChanged(ListSelectionEvent e)
ListSelectionModel lsm = (ListSelectionModel)e.getSource();
int minIndex = lsm.getMinSelectionIndex();
int maxIndex = lsm.getMaxSelectionIndex();
try //*this one should display the info of the person whenever i click the person's name at the list box via textbox.. but i cant seem to get it right since it always display the info of the first person inputed.. i tried to get the program to display them whenever it reads lines with * on them....
File fob = new File("Address3.txt");
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
for(int i = minIndex; i<=maxIndex; i++)
if(lsm.isSelectedIndex(i))
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '#')
continue;
if(chars[0] == '*')
txt1.setText(rand.readLine());
txt2.setText(rand.readLine());
txt3.setText(rand.readLine());
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
}the only problem now is about how it should display the right info about the person whenever i click its name on the list.. something about file reading or something, i just cant figure it out.
and also about how to make it scroll once it exceeds the list.. i cant make it work, maybe something about wrong declaration..
thanks in advance..
Edited by: syder on Mar 14, 2008 2:26 AMLike said before, do one thing at a time. At startup, something like:
//put all the content in a list
ArrayList<String> lines = new ArrayList<String>();
while(String line=rand.readLine()!=null) {
lines.add(line);
}If you follow the good advice to create a class to encapsulate the entries, you could populate a list of such entries like this:
static final int ENTRY_SIZE = 3;//you have 3 fields now, better to have a constant if that changes
ArrayList<Entry> entries = new ArrayList<Entry>();
for(int i=0; i<lines.size(); i+=ENTRY_SIZE) {
Entry entry = new Entry(lines.get(i), lines.get(i+1), lines.get(i+2);
entries.add(newEntry);
}You could also do both of the above in one run, but I think you will understand better what's happening if you do one thing at a time.
If you don't want to put the entries in an encapsulating class, you can still access this without looping:
int listStartIdx = <desired_entry_index>*ENTRY_SIZE;
String att1 = lines.get(listStartIdx).substring(1);
String att2 = lines.get(listStartIdx+1).substring(1);
String att3 = lines.get(listStartIdx+2).substring(1);
Maybe you are looking for
-
Changes done on playlist on iPhone doesn't sync to itunes
I can create a playlist on the iPhone4 (latest iOS) and it syncs the new playlist to itunes but any new songs added to the playlist are deleted by itunes everytime i sync it but if i add the same song to the playlist on itunes it syncs perfectly to t
-
Folder created, yet new bookmarks are not shown the folder as available
I created a folder which has several bookmarks in it. However, new bookmarks are not given this folder as an option for saving.
-
Corrupting files when 2 premiere stations accessing the same file
I'm working on a Shared Unity RAID system in a post house. When 2 Premiere stations are accessing the same clip, the clip temporarily corrupts, and i get the "Unsupported format or damaged file" error. The file returns to normal one one machine is us
-
Oracle Reports jax-ws webservice on https port shows soap address on http
- there is a Oracle Reports jax-ws webservice - it is working fine on http port - but on https port the wsdl show the soap address location still on http . Shouldnt it be https port ? Is there anything end user / webservice developer can do to fix th
-
Error: method extraHandlePCFinally(javax.servlet.jsp.PageContext, boolean)
I have the same error, im using jdeveloper 10g(9.05.2)