Can't Figure This Out....Need Help.

I am attempting to add a line score from a minor league
baseball team to a website of mine (it's an actual "in progrss"
line score that updates itself). It looks like it uses a feed of
somesort with a page refresher, but I can not identify what it is
from looking at the source code.
The format I really want looks like this website:
http://web.minorleaguebaseball.com/clubs/ip_index.jsp?sid=milb&cid=t525
However, I would be more than happy to get something that
looks like the line score from this website (on the right above the
standings):
http://www.clippersbaseball.com/
Any insight would be appreciated. Thanks in advance.
MC

you might want to explain what your problem is in the title
of your post. a lot of people don't even look at ones that say
something like "need help" without any explanation of what the
actual problem is.
that being said, from what i can tell from the code of those
pages, it looks they created some kind of database or something for
those stats thingies. which means it's probably not something that
you can just copy and implement on your own site. you might have to
create your own database.
but maybe someone else will have some ideas. again, you might
want to repost or change the name of this thread, if that's
possible. i doubt you'll get many more responses to this
one.

Similar Messages

In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

The switch is in the upper right of the viewer.

My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

Thanks so much Meg. Unfortunately, iTunes is the program I use to perform syncing. I don't really have other outside options. It is also the location of the backup I would use to restore my phone, and my only way to reclaim important data. I am concerned that, since the last backup occurred when the "other" bar was only moderately huge (around 29G I think), that a backup would replicate the problem back onto my phone.
My contacts, etc. are all in address book and the calendar app on my Mac. As far as I know, iTunes is the way to get them back, but iTunes is where the problem is.
Any thoughts on this?

How can I figure this out?

Very simple function, but as a beginner, it's still difficult for me.
my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box Center

I just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.

Can't figure this out- cable connection vs wifi connection

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

Can't figure this out: locating a MBP on the same wifi network

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

WHY!!!!! I can't figure this out

Why my girlfriend is getting the message that her "remote IP address is invalid" I can't seem to understand or figure this out...

They should turn off Internet Sharing in System Preferences > Sharing if it is On
Are either of you running Internet Sharing? If so, turn it off.
They should not be letting Parallels connect using the Mac's IP if they run Parallels.
Do either of you use Parallels Desktop or VMWare Fusion to run windows on you Mac? If so, turn off their access to the internet in their settings or preferences.
They should not be connected to the Router via wireless (Airport card) and Wired (Ethernet) at the same time.
Are either of you connected to both Ethernet port and Airport wireless at the same time. If so, disable one of the network configurations. Either unplug the cable or turn Airport off.
They should not have two DHCP servers in a modem and router on their LAN.
How are your router and modem configured. If they are both distributing IP addresses, then you need to either set your router to bridge mode or set the modem to assign just one IP address. I don't know what hardware you have, so I can't begin to tell you how to configure either. Unless it is an Airport Base Station, most modems and routers are configured through a Web interface. Airport Utility will let you configure the Airport Base Station.

Cant figure this out! Help needed!

Hi,
Ok I need some clearing up and some help. This is a program that generates receipts for an art supply store which sells three items: a brush set; a set of oil paints; and a can of oil canvas primer. The program is able to process multiple orders. For each order placed, calculate the order and print a receipt itemizing each item @ cost, the tax, the Environmental Levy, and the total cost.
The cost of the items are:
1- Brush Set: $8.00
2- Set of Oil Paints: $40.00
3- Oil Canvas Primer: $18.75
4- Taxes: 14%
5-Environmental Levy: 2% on all oil based products (including the paint set and primer). Levy calculated on product cost only (i.e. calculate without tax).
The program should also keep track of the total numbers of each item ordered. Using these values, the user can, at any time, generate a receipt summarizing all orders placed up to that point. When the user enters the sentinel to quit the program, calculate and print one final receipt summarizing all of the orders that were placed. You should also calculate and print some receipt statistics: the average cost of the receipts and the smallest and largest receipts (in terms of cost).
Your program will make use of 2 static methods (in addition to the main() method): toCurrency() and createReceipt().
Ok the deal is that I have the input loops set up fine they all work, except for Total because nothing shows up! I dont know what to do for the output nor the calculations and where or what methods I have to use and how to call them up into Main. This is what I have so far...I added in comments to guide myself but I cant figure it out...Please help thanks
import javax.swing.*;
import java.text.NumberFormat;
class Store{
public static void main(String[]args){
String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store! \nEnter the following selections: \nOrder\nTotal\nQuit");
String header,numBrush,numOil,numCan;
while(!input.equalsIgnoreCase("quit"))
          if(input.equalsIgnoreCase("order"))
                    numBrush = JOptionPane.showInputDialog(null,"Enter the Amount of Brushes:");
                    double brush = Double.parseDouble(numBrush);
                    numOil = JOptionPane.showInputDialog(null,"Enter the Amount of Oil Paint:");
                    double paint = Double.parseDouble(numOil);
                    numCan = JOptionPane.showInputDialog(null,"Enter the Amount of Canvas Primer:");
                    double canvas = Double.parseDouble(numCan);
     else if(input.equalsIgnoreCase("total")){
          //calculate the reciept
          //call the method createReciept
     else
          System.out.println("Sorry wrong input! Try again!");
          input = JOptionPane.showInputDialog(null,"\nEnter the following selections: \nOrder\nTotal\nQuit");
     }//end while loop
//calculate and print final reciept
//call up createReciept() method
//display average cost and smallest and largest order
     }//end main
public static String toCurrency(double value) {
NumberFormat num =NumberFormat.getCurrencyInstance();
String str = num.format(value);
return str;
public static double createReceipt(String header, double numOfBrushSets, double numOfOilPaints, double numOfPrimers){
/*This method will generate a receipt in System.out.println
This method has 4 parameters: a String header that describes the order being calculated
(e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
Calculate the cost each item, the tax, the environmental levy (2% only on oil based products), and the total receipt cost.
Use toCurrency() to format all currency values to 2 decimal places. Finally, createReceipt()
should return the total cost to the calling method where it will be used to update the receipt statistics. */
numOfBrushSets=8.00;
numOfOilPaints=40.00;
numOfPrimers=18.75;
double total=numOfBrushSets+numOfOilPaints+numOfPrimers;
double tax;
tax=total*0.15;
System.out.println("Welcome to the Store");
System.out.println(" You have purchased this many brush sets:"+numOfBrushSets);
System.out.println(" You have purchased this many paint buckets:"+numOfOilPaints);
System.out.println(" You have purchased this many canvas primer sets:"+numOfPrimers);
return tax;
}

import java.text.NumberFormat;
import javax.swing.*;
public class StoreRx {
    public static void main(String[]args) {
        String input = JOptionPane.showInputDialog(null,"Welcome to the Arts Store!" +
                          "\nEnter the following selections: \nOrder\nQuit");
        // create some variables to remember things as we go
        int totalBrushes = 0;
        int totalPaint   = 0;
        int totalPrimer = 0;
        double totalReceipts = 0;
        double smallestReceipt = Double.MAX_VALUE;
        double largestReceipt = Double.MIN_VALUE;
        int count = 0;
        while(!input.equalsIgnoreCase("quit")) {
            if(input.equalsIgnoreCase("order")) {
                String numBrush = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Brushes:");
                int brush = Integer.parseInt(numBrush);
                String numOil = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Oil Paint:");
                int paint = Integer.parseInt(numOil);
                String numCan = JOptionPane.showInputDialog(null,
                                 "Enter the Amount of Canvas Primer:");
                int canvas = Integer.parseInt(numCan);
                double total = createReceipt(brush, paint, canvas);
                if(total < smallestReceipt)
                    smallestReceipt = total;
                if(total > largestReceipt)
                    largestReceipt = total;
                totalBrushes += brush;
                totalPaint    += paint;
                totalPrimer   += canvas;
                totalReceipts += total;
                count++;
            else
                System.out.println("Sorry wrong input! Try again!");
            input = JOptionPane.showInputDialog(null,
                        "\nEnter the following selections: \nOrder\nQuit");
        }//end while loop
        // "quit" brings us here
        System.out.println("Welcome to the Store");
        System.out.println(" You have purchased this many brush sets: " +
                             totalBrushes);
        System.out.println(" You have purchased this many paint buckets: " +
                             totalPaint);
        System.out.println(" You have purchased this many canvas primer sets: " +
                             totalPrimer);
        //display average cost and smallest and largest order
        double average = totalReceipts/count;
        System.out.println("smallestReceipt = " + toCurrency(smallestReceipt) + "\n" +
                           "largestReceipt = " + toCurrency(largestReceipt) + "\n" +
                           "average receipt = " + toCurrency(average));
    }//end main
    public static String toCurrency(double value) {
        NumberFormat num = NumberFormat.getCurrencyInstance();
        String str = num.format(value);
        return str;
     * This method will generate a receipt in System.out.println
     * This method has 4 parameters: a String header that describes the order being
     * calculated (e.g. "Receipt Number 1", "Total of 10 Receipts", etc.) and 3 int
     * parameters for the number of Brush Sets, Oil Paints, and Oil Canvas Primers.
     * Calculate the cost each item, the tax, the environmental levy (2% only on oil
     * based products), and the total receipt cost. Use toCurrency() to format all
     * currency values to 2 decimal places. Finally, createReceipt()
     * should return the total cost to the calling method where it will be used to
     * update the receipt statistics.
    public static double createReceipt(int brushes, int paints, int primers) {
        double priceOfBrushSets = 8.00;
        double priceOfOilPaints = 40.00;
        double priceOfPrimers   = 18.75;
        double taxRate = 0.14;
        double environLevy = 0.02;
        double subTotal = brushes * priceOfBrushSets +
                          paints * priceOfOilPaints +
                          primers * priceOfPrimers;
        double total = subTotal * (1.0 + taxRate + environLevy);
        return total;
}

I can't figure this out for some reason.

I want to use a template in DVD studio pro and have the button text fade in at a certain point and have it be highlitghed when it is selected. It seems like it should be a simple thing but I can't figure out how to do it.
Thank You
Vincent LeGrow

You would need to animate the background then bring the overlay in (fade in fade outs as part of movie.)
Take a look here for how to do it (this example uses some items from DVD SP templates but would work otherwise, you can skip down to step 8 or so)
http://www.dvdstepbystep.com/ira/

HT201364 wow - can't figure this out -

I can't figure out how to tell what operating system I'm using and in the downloads it tells me to download OS X Mavericks and then it gives me a system error Very frustrated

You can find out what OS you are using by clicking on the apple icon in the top left corner of your screen and clicking about this mac. you can then use the version number to find out what operating system you are using.
Version 10.5 Leopard
Version 10.6 Snow Leopard
Version 10.7 Lion
Version 10.8 Mountain lion
Version 10.9 Mavericks

HT2368 Hello, I have MacBook Late 2008 (Unibody). And I can't install this firmware, need help. Thanks

Hello,
I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
Need your help.
Thanks

Also, according the the 1.4 update page here: http://support.apple.com/kb/DL974
It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
Anyways, again, I don't think we need it.

Can anyone figure this out??

I recently installed Windows Vista Service Pack 1 on to my laptop. After the install I can't open itunes. Now, I uninstalled service pack 1 and uninstalled Quicktime and iTunes. Now, after downloading the newest version of iTunes...it seems I have a directory problem.
The error msg reads: An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\Installer Cache\QuickTime 7.50.61.0
It was also saying the same thing about iTunes directory. I talked to people from apple and microsoft...nobody has an answer. I need help!
Thanks in Advance,
Adam

Try increasing the permissions that you have on those folders. See the post at the bottom of the page here:
http://discussion.autodesk.com/thread.jspa?messageID=5802941

HT201274 How do I erase all content and settings on my ipod touch when I don't have my password or the original computer? I can't figure this out and it is frustrating me. I need to completely reset my ipod touch. I think it is in dfu mode now

How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer? This is very frustrating and I think I have it in the DFU mode. I can't seem to figure out how to completely restore this ipod touch. Please help.

Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode

I still can't figure this out...Help!

Wow, my head hurts from trying to get Qmaster up and running...all the wasted hours! Anyways,
I have a DP 2.5GHz G5 and a DP 1.25GHz G4...the G5 has FCS installed (5.1.4), G4 only has Qmaster related items installed and both computers running 10.4.8 networked via ethernet through (100mbs hub) the G5 in Qmaster sys pref set to "services and cluster controller", G4 set to "services only' and both only have the source "Compressor" used - both shared and managed checked (I don't have Shake, so I un-checked those).
In QAdmin, I have my cluster "G5 Cluster" which contains both the G4 and G5. When I export from FCP using compressor option, only G5 runs...(I am chossing the "G5 Cluster" in the drop down menu in Compressor)... If I export from FCP using self contained QT movie, then run Compressor (from G5) and try and compressor that movie, only the G4 runs. I can not get both computers to run simultaneously on the same job. I have "Job Segmenting" checked in the Inspector in Compressor
I have scoured the disscussions looking for answers and it seems that exporting from FCP using Compressor only uses the machine(s) that have FCP installed on it...is this correct?
I have also read that maybe I need to install Compressor on my G4 (according to the manual I don't) but do I?
Maybe it is not even worth it...if someone out there doesn't think it is (in my case) please don't hesitate to say so...because at this point I am about to give up on Qmaster. Thanks in advance.
Dave

HI dave,, yes very strange indeed.
My first port of call is usually to lock at the:
• QMASTER console logs. Use /applications/utilities/console.app .. look closely and there will be something of interest in there for you, particularly the ~/..logs/QMASTER..
• also look in there also for compressor.
I have some mention of this (as do many smilar posts) in a post I did some time back at:
http://discussions.apple.com/thread.jspa?threadID=951536&tstart=0
I found the log helpful to resolve may of these funny things in QMASTER.
Sounds like a resource "unavailable" issue.. such as one servioce node cannot access the resoures it needs.
If this is tha case and (you dont have an SSAFS like XSAN), then make sure you have all the resources (inputs, outputs etc) MOUNTED and available to the G5 and the G4 (over NFS - your 100baseT or pt/pt 1GbE).
Oh and inparocula the compressor option "DONT COPY from SOURCE" or what ever it is.. som make sur all the OBJECTS are available to each machone. Check the GROUPS if you have to in the finder (get info +i) for deatios and permissions.. maybe this could be an issue too.. bit it doesn't sound like if you have alternatively runnign form compressor then our of FCP...
MY initial guess is that QMASTER has a look around and the resources if needs for that machine (either of your two hosts) are not there on that machne where it wont run.
Also check out the detail in the BATCH MONTOR. It would likely have a softerror in the display saying that something didn't fire up.
Anyway. if you find somthing interetsing in the QMSTER log, feel free to post it.
good luck

HT201304 I just can't figure this out . how can I do a restriction on my ipad help me please

And I cannot get rid of games the once that being downloaded help please

You can set restrictions via Settings > General > Restrictions e.g. hide Safari, iTunes, music or films/TV programmes via their age rating. If you are having problem doing that then what exactly are you trying to do and what happens when you try to do it ?
To delete an app, press and hold any of the apps on your iPad's homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the apps shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

Can't Figure This Out....Need Help.

Similar Messages

Maybe you are looking for