EXTRA INFORMATION IN HRSS (AFTER APPROVAL FROM THE APPROVING AUTHORITY)

Gurus,
We have defined Employee Cash advance request in Extra Information in HRSS and the same we are using in HRSS.
One employee first time for the cash advance, HRSS forms show only option to add. After request from the employee, it is approved and paid by quick pay or regular pay to the employee.
When second time employee select employee cash advance request from the menu. cash advance form show the eixsiting entry and three options Add Update and delete it. As per my understanding when one previous request have been apprpved and paid through quick pay or regular payroll run, it should not be available for edit or delete.
What do u say and if their any solution available for this.
Pls help.

Hi ,
Fallow Below Steps it will work for you.
Step 1: Select Advanced Table right click and create Detail Region for Advanced Table.(detail)
Step 2: Create Message Component Layout under Detail Section.(DetailRN)
Step 3: Add Item(extra information item) under DetailRN and set Proper View Instance and View Attribute.
Below Is structure How component look.
TableRN(Advanced Table)
col1
col2
AdvancedTable Components
   detail
     DetailRN
         col3 (Extra Information)
         col4 (Extra Information)
Let me know for any issue.
Thanks,
Dilip

Similar Messages

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

SQL Server 2005 Database Mail - Mail configuration information could not be read from the database.

I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log Database Mail (Database Mail Log)
Log ID 152
Process ID 7684
Last Modified 3/14/2013 6:49:58 PM
Last Modified By SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log
Database Mail (Database Mail Log)
Log ID
152
Process ID
7684
Last Modified
3/14/2013 6:49:58 PM
Last Modified By
SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession
dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)

My playlist didn't show up on new laptop after copying from the old laptop

What can I do when my playlists didn't show up on new laptop after copying from the old one?

abombaci wrote:
I just simply copy only the whole iTunes music folder to my external hard drive, that's it and it goes good. That way if you just copy the whole iTunes folder it also carries along with it all it's subfolders. If subfolders aren't carried over you may end up with a library with missing album arwork. Album artwork, iTunes media folder, itunes previous libraries, itunes XML folders etc., etc. You get the picture.
Yes.
This is much better way than changing the media folder location.
Keep everything in the same iTunes folder.
However, when I do it this simple way as compared to the Apple way it doesn't save my play counts or ratings.
Since it is exactly the same library, everything should be the same.
Then just go to external drive click on iTunes folder and then in iTunes add folder to library and all your songs load up. This isn't moving the library but just backing it up.
You don't need to add anything.
Hold Option and launch iTunes.
Select Choose library... and select the iTunes folder you copied to the external.
You can delete then /Music/iTunes/ folder as this same folder was copied to the external and this is now your iTunes library.
You can also do this top make a backup of the iTunes library (thoug you should be making a backup (Time Machine or some other backup program) of yoru entire computer.

HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3 Any solutions?

Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

Greetings.
I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint. This is typically due to incorrect DNS or firewall configuration. The Office 365 tenant is currently configured to use the following URL for Autodiscover
queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
Any help would be greatly appreciated.
Hello World.

Hello,
If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
http://support.microsoft.com/kb/2626696
Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
Additional blog for your reference.
http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
Cara Chen
TechNet Community Support

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Hey ronniefai,
Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
Viewing the Print Summary
You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
Note: Print Center is available only while printing is in progress.
via AirPrint Basics
http://support.apple.com/kb/HT4356
If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
Thanks,
Matt M.

How to keep your email on the server after deleting from the phone?

how to keep your email on the server after deleting from the phone?

If this is a POP mail account:
Settings > Mail.... > Your account > Advanced > Delete from server > Never.
However, this will risk re-downloading as new mail
IMAC accounts mirror what's on the phone in the server, so deleting from the inbox on the phone will either send it to the trans folder on the server or leave it in the inbox but marked as deleted (depending on the server)
Settings > Mail.... > your account > Advanced > Deleted Mailbox > On My iPhone Trash

Hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

Here you are "the strange draft logos"...

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried g

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.

K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

APINV return back to the previous approver in the Approval sequence

Dear All
Some Invoice's return back to the previous approver in the Approval sequence although the previous approver has approved it. Issue has come abruptly No modifications or changes has been taken place. The Approver sequence has been already completed but the sequence is starting again in the Approval Hierarchy.
Workflow is getting completed if it is approved by workflow admin.
Regards
Arifuddin
Edited by: user11309801 on Oct 30, 2011 4:59 AM

The usual suspect is some vacation rule. If that is not the case, you might be hitting an issue with workflow/AME and would need to research on Metalink.

Extra Information in HRSS approval process

Dear Members
We are using HRSS for approvals and approvals have been managed through Approval Management Engine. All is working fine.
Now we want to include extra information (EIT) in our approval process. Can u please advise me which attribute to be used for this purpose in AME and which dynamic query to be used for getting necessay information or which work flow process will work for it.
Please help me.
Regards

In which attribute i need to define. Please guide me. If any reference documents is available, pls give any idea.
Regards

Lack of information when ordering a phone from the store

I recently became eligible for an upgrade on my phone so I went to the store to get an iphone 4s. I should have called the stores before since none of them had the iphone in stock. I figured I could just order the phone at the store instead of going all the way home to order it on my computer. I went through the order with one of their representatives. Once it was done, I given a receipt and told the phone would arrive in two days.
I went online once I got home and noticed that the order status had not been updated on my recent order (I was sent the order confirmation via email). There was just a blank space next to the tracking number. I assumed that I had checked the order status too soon and that they would have a tracking number posted the next day. NOPE! Luckily, I went to My Verizon account to see if their was any information there and noticed that there was a red notice at the top of my page saying that I needed to approve the terms and conditions contract before my order would ship. I was never told by the representative that I needed to have this approved. If I hadnt happened to check my verizon page when I did then I may have not figured out what was going wrong with my order.
I was also confused about the terms and conditions stating that I was going to be charged the $350 early termination fee. As I said, I had become elibible for an upgrade one day prior to seeing this notice so an early termination fee should not have applied. I ended up calling Verizons customer service to get some answers. I found out that the phrasing on the website is horrible and that they were not charging me the early termination fee for my most recent purchase. The costomer service representative informed me that in addition to setting up a new two-year contact for the iphone 4s, I needed to approve the terms and conditions stating that if I need to get a new device after receiving my iphone that I will be charged the $350. That was not well communicated at all on verizons approval page.
The whole process was extremely frustrating. I hope this helps anyone else that has similar problems.
Here is a way that Verizon can remedy this problem:
Change the information on their order status page. Instead of having a blank space next to the tracking number, they should provide customers with a little feedback. Maybe provide customers of the actual status of their order. If Verizon needs more information before placing an order, such as approval of the terms and conditions, then it should say something such as "contact customer service" or "terms and conditions needs approval before shipment". If they have received the order but haven't shipped it yet then that should be helpful feedback too.

God morning meowpants39,
Thank you for providing your feedback on the iPhone 4S order process. Please accept my apologies on the lack of communication about the terms and condition prior to leaving the store. May I ask did you receive your new iPhone 4S yet? If not then I will be happy to check the status of your order. If you have your confirmation number then you can check the status using the link posted below.
http://www.verizonwireless.com/b2c/orderstatus/OrderStatusForm
If you do not have your confirmation number or if you haven't received your tracking number then please send me a private message with your full name, mobile number, and a brief description of the issue on the iPhone 4S. I can contact you and provide you with the status of your order.
Thank you for allowing me the opportunity to assist you today...

How To Save Modified Fields After query From The Database

I Have This Customer Information Form That's Sort of an Ordering Forms , I Made It By LiveCycle v9.0
And I Want To be able to search for Specific Record and Modify it and Save It Again to The DataBase
I believe That We All Saw The (( Data Connected Forms Presentation )) For Pual Guerette
At One Part Of The Presentation (Minute 0:26:00 specifically) When He Try To Search A Specific Record In the Database
And He Got all this annoying Messages Then The Record what He looking Shows up ; He Said That We No Longer able to Modify The Record After We Doing the Search
My First Question Is Why ???
Is there anyway After I got that Specific Record I Want from the Database I Can make my modification on it and update it Back in the DB.
OR i Have to Browse the whole DB looking for it Specially that I got this (ID Auto Increasment Number field Issue) Which leads me to ;
My Second Qustion;
Why I Can't just connect ''The Form Order Number'' to an Auto Increasment Number field in the DB
Obviously i can't, So Can I do Anything to achieve this goal ??
I Believe that we can Find some scripting to make that Happen
I Will Be So Grateful If There Is Any Helpful Answer
FYI: I'm Not Java Expert So If There Is any Coding That's Can be Helpful Please POST ALL OF IT if you can ,,,,

Hi,
The information there is excellent and I would strongly recommend it.
I don't have any public database examples and I am not inclined to spend time preparing an example if you are not prepared to read up on the methods.
Stefan's site is the only link I have for databases.
Good luck,
Niall

EXTRA INFORMATION IN HRSS (AFTER APPROVAL FROM THE APPROVING AUTHORITY)

Similar Messages

Maybe you are looking for