Extra pixel of space

Good afternoon all,
Im working on a new design which Im having a bit of problem
with an extra
pixel of space showing between the bottom of the main images
and the white
bottom border. This is only happening in IE (7) so far, it
doesnt do it in
FF.
Ive been searching for the answer for a while, but I give up
- does anyone
have the time to look for me and see if they can shed some
light.
Thankyou for your help
Fiona

Thanks for your help Murray and Josie, I really appreciate
your time.
I removed the extra spacing in the code, but alas, it stays
the same.
Ill keep searching and see if anything comes to light,
otherewise, Ill have
to rethink how Ive done the layout, as the owners of this
site are picky,
picky, picky and probably using IE7.
I think Ill try adding the white border to the bottom of the
middle section
instead of top of bottom section and see if that works.
Regards
Fiona
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Try changing this -
>
> <div id="changeframe"><img
> src="
http://www.fionahayward.com/delavega/images/home/grid.jpg"
> width="578" height="455" />
>
> </div>
>
> </div>
>
> </div>
>
>
> to this -
>
> <div id="changeframe"><img
> src="
http://www.fionahayward.com/delavega/images/home/grid.jpg"
> width="578" height="455" />
> </div>
> </div>
> </div>
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Fiona" <[email protected]> wrote in message
> news:[email protected]...
>> ooops, how silly....
>>
>>
http://www.fionahayward.com/delavega/index.html
>>
>> Sorry,
>> Fiona
>>
>> "josie1one" <[email protected]> wrote
in message
>> news:[email protected]...
>>> >look for me
>>>
>>> <searching> where? (o:
>>>
>>> --
>>> Jo
>>>
>>>
>>> "Fiona" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Good afternoon all,
>>>>
>>>> Im working on a new design which Im having a
bit of problem with an
>>>> extra pixel of space showing between the
bottom of the main images and
>>>> the white bottom border. This is only
happening in IE (7) so far, it
>>>> doesnt do it in FF.
>>>>
>>>> Ive been searching for the answer for a
while, but I give up - does
>>>> anyone have the time to look for me and see
if they can shed some
>>>> light.
>>>>
>>>> Thankyou for your help
>>>>
>>>> Fiona
>>>>
>>>
>>>
>>
>>
>

Similar Messages

How can I cancel my order for extra ICloud storage space?

How can I cancel my order for extra ICloud storage space?
I don't need it afterall...

Call Apple. 1-800-My-Apple

Extra Pixel Between TabBar and ViewStack

I have a TabBar inside an HBox, becuase I want to disply other things to the left and right of the TabBar. I'm stacking the HBox over a ViewStack buy putting both in a VBox, and setting the VBox "verticalGap" to "0". It almost works as expected, but I get an extra pixel of "HBox" showing through between the TabBar and the ViewStack. I've tried setting borders and padding to 0, but to no avail.
Any help on how to get rid of the extra pixel, or info on where it's even coming from, would be much apprerciated.
The folloing tiny application demonstrates the problem (I know it's ugly;   it's supposed to be so that it clearly demonstrates the problem):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
    <mx:Style>
        TabBar.testTabBarStyle{backgroundColor: #FFCC00; tabStyleName: tabBarTab;}
        .tabBarTab{fillColors: #FF0000, #0000FF;}
    </mx:Style>
    <mx:VBox x="10" y="10" width="343" height="200" verticalGap="0" backgroundColor="#FF0096">
        <mx:HBox width="100%">
            <mx:Label text="Stuff Above TabBar/ViewStack Control"/>
        </mx:HBox>
        <mx:HBox width="100%" backgroundColor="#00FF00" borderThickness="0" paddingBottom="0">
            <mx:Label text="Stuff Left"/>
            <mx:TabBar width="75%" dataProvider="viewstack1" styleName="testTabBarStyle" paddingBottom="0"/>
            <mx:Label text="Stuff Right"/>
        </mx:HBox>
        <mx:ViewStack id="viewstack1" width="100%" height="80%" backgroundColor="#FFCC00">
            <mx:Canvas label="Tab1" width="100%" height="100%">
                <mx:Label text="Veiw1 - Annoying green pixel above --^"/>
            </mx:Canvas>
            <mx:Canvas label="Tab2" width="100%" height="100%">
                <mx:Label text="Veiw2 - Annoying green pixel above --^"/>
            </mx:Canvas>
            <mx:Canvas label="Tab3" width="100%" height="100%">
                <mx:Label text="Veiw3 - Annoying green pixel above --^"/>
            </mx:Canvas>
        </mx:ViewStack>
        <mx:HBox width="100%">
            <mx:Label text="Stuff Below TabBar/ViewStack Control"/>
        </mx:HBox>
    </mx:VBox>
</mx:Application>

Hi Aman,
I don't think that will resolve the issue and also for the bottom we need to specify an integer which is in pixels we should not specify string ..none.
The issue will be resolved simply by setting the VBox vertigalGap to negative value...vertigalGap="-2"
Thanks,
Bhasker

Rendering to .mp4 in CS3. Prem adds an extra pixel to output

Hi everyone.
Has anyone else had the same problem I'm getting?
When I render out my file from CS3, Prem has added an extra pixel to my file.
My settings:
H.264 Compresser
PAL
853x 682
Frame Rate- 15
Square Pixels
Progressive
Baseline
Level 3.1
1 Pass VBR
Target bitrate - 0.5
Max Bitrate - 1
Under Multiplexer I have .mp4 selected not .gpp(although I tested .gpp but still got that pesky extra pixel)
So basically my outputted file is 854x682
I know my frame size is odd, but it is very specific for the project and cannot be altered for various reasons so please don't tell me I need to be altering my frame size, as I can't. Also the the orignal footage is a mix of screen captures and graphics.
Thanks in advance.

This is a dilemma. You are in the same position as when you tell your computer to only use 0 and 0.6 and forget about the binary system (0 and 1). It is pretty hard to change the fundamentals and intrinsic logic that is built in every computer. One has to give and my bet is that you need to give.

How to remove the extra or blank space from RTF Template

Hi All,
Try to remove the extra space from xml template.
Here I have attached the .xml file with .rdf, here the issue is when you load the data we will get 2 page output but when I am trying to add any column or extra space in the last page of this template the output getting 4 pages with lot of blank space. Could you please guide me to solve this issue.
Could you please let me know how to do the attachement in this forum as I am new to this community.
Regards,
Sushant

Can you drop in a mail with RTF, xml data to [email protected], I will help you on the issue.

Cost of extra personal web space

What is the cost of extra personal web space

From the main screen for the webspace, on the right hand side click "Manage My Personal Web Site". Then click on "Add More Personal Web Space". That will bring you to this screen.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How can I get extra [SATA] storage space, the cheapest way?

Hello everybody,
I've an Asus M2N68-AM Plus Motherboard in a HTPC with all SATA connectors occupied. What can you guys come up with as the cheapest way to add more extra storage space [via SATA]?
1. Change Mobo?
2. Switch HD's?
3. Any controller board?
4. Other?
Note: The main idea is to maintain the existing HD's, cause I don't want to keep them unused or to loose money by selling.
Regards.

Does that mobo have an eSata connector on the back panel?
If yes, buy a regular Sata drive and an enclosure (with a fan!) that has eSata as well as, or instead of USB... and just connect it that way
Or buy a ready made eSata drive/enclosure

Help! Extra one line space in text file???

halo, i am doing a program to download a created text file into pc... the download program is just retrieve records from database and write it into a text file... then i will pass that created text file name to another program, then it will prompt out the window message dialog box to allow user to save or to open the text file....
now i want to know what will cause one extra line at the top of the downloaded text file??
Here is my coding, assume the file name is file1...
response.setContentType("text");
response.setHeader("Content-Disposition","attachment;filename=" + file2);
int Read1;                              FileInputStream stream1 = null;                    try {                                   File f = new File("c:/mysql/data/mrs/download/" + file2);
     stream1 = new FileInputStream(f);               while ((Read1 = stream1.read()) != -1){               out.write(Read1);                         }//end while                              out.flush();                              }//end try</p>                                                                 finally {</p>                              if (stream1 == null){
     stream1.close();
     }//end if</p>
     }//end finally</p>

                                     response.setContentType("application/text");
                                     response.setHeader("Content-Disposition","attachment; filename=\"" +fileName);
                                     response.setContentLength((int)file.length());
                                     OutputStream outputStream = response.getOutputStream();
                                     FileInputStream stream = new FileInputStream(file);
                                     BufferedInputStream bufferedInputStream = new BufferedInputStream(stream);
                                     InputStream inputStream = new BufferedInputStream(bufferedInputStream);
                                     int count;
                                     byte buf[] = new byte[4096];
                                     while ((count = inputStream.read(buf)) > -1)
                                          outputStream.write(buf, 0, count);
                                     inputStream.close();
                                     outputStream.close();

In itunes music the file size is less and in the iPhone it occupies en extra 1gb of space

in itunes music library the file size is 2.02 GB. But after i transfer those song to iPhone the file size in iPhone is shown as 3.3 GB

Where are you getting the file size of your music lib? Are you looking at a playlist view by chance? The iPhone size in likely including things like videos and album content that takes more space.

Why did it add an extra pixel to my jpg?

I recently designed some ads in Indesign CS6 which I then exported to jpg format. When I sent them to the publishing house they could not be uploaded onto their system because the size was not correct although in indesign the size of the document was the correct pixel size.
In opening them in Photoshop CC I could see a single pixle had been added to the width and this was stopping it from going through the publishing houses online system.
Has this happened to anyone else before? Is it a common export problem or is this something I did wrong and maybe should have expected it to happen?
Just want to know if I need to be checking every file in photoshop in the future!

When you exported to JPEG did you select the "Export Selection" or the "Export Page" option?
What I do with InDesign for web images is I export to PDF first.
Then I open that in Photoshop - you can elect the size of the image to crop to and the resolution.
Then save from there.
I have never liked InDesigns export of jpegs, they come out horrible in my opinion.

No longer needing extra 20GB of space (iCloud). How to cancel order and payments?

I ordered and paid for an additional 20GB of space (iCloud) per month.
How do I cancel the order now that I no longer need?

See the "Downgrade your iCloud storage plan" section of iCloud storage upgrades and downgrades - Apple Support

Publish to HTML - extra pixels

Hi,
I've published a Captivate 2 as a SWF with export HTML option
enabled and when I run it at 1024 x 768 resolution with Fullscreen
option I get an additional 15 pixels at the top between the
Captivate slides and the IE browser titlebar and 10 pixels to the
left of the start of the IE window to where the Captivate slide
starts.
Is there any way I get rid of this waste of screen rela
estate, i.e., can I "justify the playback area to the top and left
of the IE browser window?
Thanks, Diane

Hello and welcome!
I think you should be able to use an old <DIV> trick
for this to line up all the way to the left and to the very top if
you want... just substitute my movie (swf names) for your own. I
hope this works for you!

Printing PDF from IE with Adobe Reader - extra white space at top of page

I searched the forums far and wide but did not find this question or information to answer it. If it's out there, I'd be much obliged if you'd point me in the right direction.
A user of the web app for which I do tech support just called to say that starting today, whenever he opened a PDF from our app (in IE), the PDF looks fine on screen but when he prints the PDF, every page has extra blank/white space inserted at the top, which cuts off the bottom inch or two of each page.
No other users have called with this complaint, and if changes to our app or an automatic background Adobe Reader or IE update caused this problem, I would have heard from many users. I have a sneaking suspicion I have heard about this from other users, but since troubleshooting their IE or Adobe isn't exactly my job, I don't know if I did any more than advise them to talk to their tech support people.
I can't recreate his problem (read: it works fine for me), but I'd like to help him. Can anyone think of a reason why this might be happening?
Thanks in advance.

What I know: He's using Adobe Reader X. I do not know if it's the most recent version. The problem only exists with PDFs from our web app; he's not having trouble with other sites or with other PDFs.
I do not have a copy of the PDF; I can't give you the copy I downloaded when I logged into his account because there is proprietary confidential information on it, but everything worked fine for me and he's the only user with this complaint, so I believe it's related to his PC or printer, not to our app or to Adobe per se.
I sent him email asking for more information, but I do not know what printer he's using. I don't even know what version of Windows he's running.
Based on some info from Adobe, I suggested he make sure he's using the most recent version (10.1.2), try 'print as image" to see if that's any more successful, and make sure his printer drivers are up to date.
Given the nature of tech support, if he solves the problem or finds a workaround he's happy with, I may never hear from him again to know. I just wanted to know if this was a known issue and what recommended resolutions for it might be. Having not found anything on the web at large, I figured the Adobe forums would be a good place to ask.
Thanks for the time you took to answer.

How do I remove extra space between paragraphs

I'm writing a research paper, and between paragraphs an extra line of space is added. My professor isn't happy about this. Help me eliminate the space.

The default after paragraph spacing in Pages is 12 points. With a 12 point font, this puts a whole line-worth of space after each paragraph return. It is very easy to change this in the text inspector.
If you don't want to have to remember to change it each time you open a new blank word processing document, create your own template. Open the blank template & set up your document with the line spacing, margins, headers, etc. as you'd like. Redefine all of the paragraph & character styles to have your desired font. You can set default wrap for any object as well as many other settings. Insert a table, click in it & choose the font, size, color, etc. you want in the fonts panel or format bar. You can do similar changes to inserted objects & text boxes. While you're at it resize the box if you want, set the amount of extra space in the wrap inspector, etc. Delete each text box, object & table after you've set them.
Now, save this document as a template & select that template as default in preferences. If you decide to make any changes to the template down the road, just Save As Template again with the same name & replace the previous version. All of your new documents will have these settings for inserted objects, images & tables. Unfortunately, the settings won't apply to any other templates or "foreign" documents you open with Pages.

Please help: Extra Line Space after bolded word

I am in the process of editing a book manuscript in MS Word 2010, and there is an annoying problem that I cannot solve. I have tampered with all the line spacing options, but I'm at a loss.
When I bold a word, it introduces an extra little line space before the proceeding line. When I unbold the word, the space goes away. Has anyone encountered a similar issue? And is there an easy fix?
Thanks very much,
Jon

Are you saying that the line spacing changes when you apply bold formatting? Try a different font. Or you could specify a fixed value for line spacing (choose the "Exactly" option in the Paragraph dialog box).
Stefan Blom, Microsoft Word MVP

Extra pixel of space

Similar Messages

Maybe you are looking for