Extract data from ECC to Oracle using Data Services 4.0

How to extract data from ecc6.0 Business content extractors  to oracle using sap bo data services 4.0

Are you trying to use the SAP BW Business Content to extract data out of ECC and load into Oracle tables with Data Services? If that's the case, then you cannot do that. The SAP BW Business Content was developed to only be used in conjunction with SAP BW. When using Data Services to access the extractors in ECC, it has to have an SAP BW InfoPackage associated with it to execute. In this architecture, Data Services is only a pass through from ECC to BW and allows the ability to do some transformations of data prior to loading into the EDW layer (staging tables basically) on SAP BW.
To connect ECC to Oracle, you're going to have to have all of the SAP BusinessObjects supplied Function Modules loaded onto ECC, along with a non-dialog logon account that has the ability to pass dynamic ABAP programs, generate the programs and schedule them. Depending on how you want to process the output, you may also have to have the ability to write to files on the ECC application servers and have an FTP account created on the application servers that can GET flat files and potentially DELETE them (you're going to need to delete periodically, otherwise your jobs will crash when the file space allocation has been consumed).

Similar Messages

  • Can we download employee data from ECC to CRM using standard middleware?

    HI,
    Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
    Thanks,
    Regards,
    PV

    Standard replication for employee to CRM is using ALE.
    BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
    However send this information using ALE is not difficult. Why don't you wan to use ALE?
    Regards,
    Lyda

  • I am extracting the data from ECC To bw .but Data Loading taking long tim

    Hi All,
                     i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last   6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
    Thanks ,
    chandu

    Hi,
    There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
    1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
    You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''.  Also give '*' to user name.
    Job name:  REQ_XXXXXX
    User Name: *
    Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
    2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
    3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
    At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
    Let me know if you still have questions.
    Assigning points is the only way of saying thanks in SDN.
    Thanks,
    Kumar.

  • How to load data from sysbase to oracle using sysbase odbc drivers??

    Hi ,
    I am trying to create an interface from sysbase to oracle, using LKM sql to orcle and IKM SQL control append, IKM SQL incremental append,CKM oracle . when we are running the interface we are getting below error
    com.sunopsis.sql.SnpsMissingParametersException: Missing parameter: C1_WORKGROUP_ID
    SQL: insert into ODIUSER.C$_0AGENTLOGINLOGOUT (      C1_WORKGROUP_ID,      C2_USER_ID,      C3_CREATEDT,      C4_UPDATEDT,      C5_REASONID,      C6_LOGOUTDT,      C7_LOGINDT,      C8_SERVICE_ID ) values (      :C1_WORKGROUP_ID,      :C2_USER_ID,      :C3_CREATEDT,      :C4_UPDATEDT,      :C5_REASONID,      :C6_LOGOUTDT,      :C7_LOGINDT,      :C8_SERVICE_ID )
         at com.sunopsis.sql.SnpsQuery.completeHostVariable(SnpsQuery.java:439)
         at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java:1926)
         at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java:122)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3034)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java:729)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2815)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:619)

    Hi all,
    Can any one help me in doing interface from sysbase to oracle??

  • SEND PR data from ECC to SRM using PI

    Hi PI Guru's
    Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
    If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
    Can we use ABAP proxys or IDOCs.
    Any help would be greatly appreciated.
    Rgds
    Nikki

    decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
    chirag

  • Problem in migrating huge data from mysql to oracle using OMWB.

    I'm using OMWB to migrate my mysql db to oracle db.Mysql db contains some 43 tables and all of them were copied to oracle db except a table "as_db" which contains some 503 mb of data.The table contains 3 columns and two of them were integer type and one is of medium blob.While migrating i'm not getting any error.After migrating i opened the table in the oracle.The table alone created but there were no datas.But all other table contains data.
    Then i generated the ctl file usiing SQL*loader for that particular table alone and tried to execute but it also fails by giving the Column size exceeds for blob.
    How i handle this issue?
    Thanks in Advance,
    Jai.M

    Looks like you may have to save you blobs out as files and load them individually thru the sqlldr process. I know this has normally been done thru raw to blob
    What way is your blob data being saved out in the extract data file.
    Barry

  • Exporting Text data from PHP to Oracle CLOB data (Carriage return - issue)

    This is my original text content in PHP - Data type - Longtext
    SECTION - 1
    This a test description.This a test description.
    This a test description.This a test description.
    This a test description. This a test description.I exported the above content from PHP as a SQL script file (insert into.. ) - export.sql [ insert into table_name (id, text_content) values (1, '') ]
    while exporting data from PHP table into export file.. it replaced the "Carriage return" with "\r\n\r\n" in the insert statement for text_content column
    When I run this INSERT statement in Oracle (for longtext, I have created a CLOB column in Oracle), the following text_content data is inserted into CLOB column in Oracle.
    SECTION - 2
    This a test description.This a test description.\r\n\r\nThis a test description.This a
    test description.\r\n\r\nThis a test description.This a test description.Now I have created a item named P1_TEXT_CONTENT of type TEXTAREA and try to fetch the CLOB data into this page item.
    BUT textarea displays the entire content including "\r\n\r\n" as mentioned in SECTION - 2
    I want to display the content in textarea (item - P1_TEXT_CONTENT) without "\r\n\r\n" same as the original content with "Carriage return" as mentioned in SECTION - 1
    What are the options we have?
    Thanks,
    Deepak

    DeepakJ wrote:
    I want to display the content in textarea (item - P1_TEXT_CONTENT) without "\r\n\r\n" same as the original content with "Carriage return" as mentioned in SECTION - 1
    What are the options we have?Run an update on the Oracle table following the inserts to replace the escaped CR/LFs with real ones:
    update foo
    set clob_column = replace(clob_column, '\r\n', chr(13) || chr(10));You might want to experiment to see which characters are actually necessary. As an OS X/Linux user I'd probably just use a single LF chr(10).

  • Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

    Hello,
    We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
    1.Should we go for customization of services completely,so that it would fulfil our requirement.
    2.Are there  standard Enterprise Services exists which would we give us data in range(all records).
    If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
    Thanks & Regards,
    Divya.

    Hi Vaibhav,
    Let me tell you the objective in detail.
    Objective.
    To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
    This will consist of following major components:
    OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
    Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
    Enterprise services is an SAP utility to communicate with SAP.
    AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
    Fusion middleware is being used to develop application interfaces following AIA standards.
    Tasks at stake:
    Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
    Technical work of developing middleware using Oracle Fusion
    From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest  consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
    Thanks & Regards,
    Divya.

  • Modify vendor number when replicating vendor master data from ECC to SRM

    Hi,
    Is there a way  to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
    Does anyone have documentation on the user exit, how do I use it??
    Thanks and Regards'
    David

    Hi David,
    Please go through the link below:
    [Enhancement SAPMF02K Vendor Master Data  - question about LIFNR;
    Regards
    Anirban

  • Transfer z-table data from ECC to CRM via Middleware

    Hi,
    I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
    André

    Hi,
    The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
    Replication of Z table from CRM to R/3 - No mBDoc Created
    Regards,
    Susanta

  • How to transfer data from ECC to CRM via IDocs (Clfmas01),

    Hi all,
    how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.    
    Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
    Edited by: khaja fareed on Jan 11, 2010 12:44 PM

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

  • How to get data from ECC --- Sales Order,Delivery,Transfer Order & Invoice

    Hi,
    Good day.
    I'm ABAPer and I need to get Sales Order,Delivery,Transfer Order & Invoice data from ECC.  The said data will be displayed in the custom form that I need to create.  How exactly do i get the said data above? 
    Can I get them in the tables avaialable in GTS? Where?
    Or do I get the data directly in ECC? How?
    Thank you very much!
    Best regards.
    Brando

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

  • Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)

    Hello Forum,
    I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
    In CRM MARA table do not exist.
    I need help in transferring data from ECC to CRM using R3AC1 .
    This transaction is not in ECC but it is in CRM.
    Thanks & Regards
    Lovleen

    Hello Lovleen,
    In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
    THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
    Thnx.

  • Extracting data from ECC tables in BODS

    Hello all,
    I'm trying to extract data from ECC tables. I have created a data store and imported the necessary tables(FAGLFLEXT) that i will be using.  I have used the table in a job as a source and tried to execute the job but i was only able to extract 28 records from the extractor when there are many more records present in the table and  also when i view the data in BODS i can only see 28 records.
    Plz help me in resolving this. How to extract the whole data?
    Thanks in advance.

    The table layouts can be found in the [documentation for EPMA|http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip] . If this doesn't work, there are other options to export hierarchies to text files. You can use life cycle management or the [EPMA File Generator|http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].
    Kyle Goodfriend
    http://www.in2hyperion.com
    Please make sure you assign your post as answered when an appropriate answer is provided (or helpful when applicable) so others benefit.

  • Unable to extract the data from ECC 6.0 to PSA

    Hello,
    I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
    When i try to load Full Load into PSA , I'm getting following error message
    Error Message: "DataSource 2LIS_11_VAHDR must be activated"
    Actually the data source already active , I look at the datasource using T-code LBWE it is active.
    In BI  on datasource(2LIS_11_VAHDR) when i right click selected "Manage"  system is giving throughing below error message
    "Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
    If anybody faced this error message please advise what i'm doing wrong?
    Advance thanks

    ECC 6.0 side
    Delete the setup tables
    Fill the data into setup tables
    Schedule the job
    I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
    BI7.0(Service Pack 15)
    Replicate the datasource in Production in Backgroud
    Migrate Datasource 3.5 to 7.0 in Development
    I did't migrate 3.5 to 7.0 in Production it's not allowing
    When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
    I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
    Thanks

Maybe you are looking for