SEND PR data from ECC to SRM using PI

Hi PI Guru's
Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
Can we use ABAP proxys or IDOCs.
Any help would be greatly appreciated.
Rgds
Nikki

decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
chirag

Similar Messages

Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

Transfer Data from ECC to SRM

Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.

Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
   DESTINATION 'XXX'
   IMPORTING
     I_REF_GUID    =
     I_BAPIMODE    =
     I_PARK        =
     I_SAVE        =
     I_TESTRUN     =
     I_HEADER      = I_HEADER ?
     IT_ATTACH     =
     IT_DYN_ATTR   =
     IT_CONDITIONS =
    EXPORTING
      E_HEADER      = E_HEADER ?
      ET_ATTACH     =
      ET_DYN_ATTR   =
      ET_CONDITIONS =
    TABLES
       I_ITEM        =
       I_PARTNER     =
       I_LONGTEXT    =
       I_SDLN        =
       I_ORGDATA     =
       I_HCF         =
       I_ICF         =
       I_TOL         =
       I_WEIGHT      =
       IT_EXCHRATE   =
       E_ITEM        =
       E_PARTNER     =
       E_LONGTEXT    =
       E_SDLN        =
       E_ORGDATA     =
       E_HCF         =
       E_ICF         =

Can we download employee data from ECC to CRM using standard middleware?

HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PV

Standard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda

Extract data from ECC to Oracle using Data Services 4.0

How to extract data from ecc6.0 Business content extractors to oracle using sap bo data services 4.0

Are you trying to use the SAP BW Business Content to extract data out of ECC and load into Oracle tables with Data Services? If that's the case, then you cannot do that. The SAP BW Business Content was developed to only be used in conjunction with SAP BW. When using Data Services to access the extractors in ECC, it has to have an SAP BW InfoPackage associated with it to execute. In this architecture, Data Services is only a pass through from ECC to BW and allows the ability to do some transformations of data prior to loading into the EDW layer (staging tables basically) on SAP BW.
To connect ECC to Oracle, you're going to have to have all of the SAP BusinessObjects supplied Function Modules loaded onto ECC, along with a non-dialog logon account that has the ability to pass dynamic ABAP programs, generate the programs and schedule them. Depending on how you want to process the output, you may also have to have the ability to write to files on the ECC application servers and have an FTP account created on the application servers that can GET flat files and potentially DELETE them (you're going to need to delete periodically, otherwise your jobs will crash when the file space allocation has been consumed).

Regarding Address Field while replicating data from ECC to SRM

Hi Forum,
I have a few qauestions regarding the mandatory fields that must be maintaned in ECC before replicating data to SRM..
1)Why is the address data (one we see in PA20 by selecting Addresses for the user) i.e. city and pincode required vefore replication.
2)Is there a way by which it can be defaulted so that we dont have to maintain it for each and every user?
Regards,
Anubhav

Hello,
Try if this helps.
SAP Note : Note 550055 - EBP/CRM: New integration for business partner : Section g:
Addresses: If addresses are required to generate correct business partners of the organizational unit role (in SRM, for example), the HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If it is mandatory for each business partner of the organizational unit role to have an address, but the relevant organizational units do not always have a separate address, you can define a standard address. Create a separate business partner for storing the standard address. The number of this business partner, which is used as a container, is stored in the HRALX/OADBP switch (formerly BUPA/ADRBP).
Thanks
Ashutosh

Integrating Data From ECC to CRM

Hi Experts,
My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
Problem: to map the data from ecc to CRM , I am supposed to call this RFC Fm ( existed in CRM side) from ECC using RFC Destination.
to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
Thanks & Regards.
Naga Priyanka. T
Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde

Delivery address replication from ECC to SRM

Hello All
We are onboarding a punch-out vendor in SRM. The Vendor said that they won't read the delivery address sent by us in the PO output, but would rather pre-store all the delivery addresses and their codes.
The code would be auto read & this way they can ship immediately with just 1 day lead time.
We are using classic scenario and noticed that when the PO is created in the backend, it always creates a new address number each time , even for the same address.
We are mulling about a process where the Ship to address would be created in ECC and replicated to SRM , with the same number as ECC.
So my question is :
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Thanks
Kedar

Hi Kedar,
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
Ans : You can create delivery address in SRM from ECC by creating a Report and Utilizing RFC function module to read address
data from ECC and creating the same in SRM through FM BBP_BUPA_ADDRESS_ADD [i hope the FM is correct as i do not have the system now].
I dont know of any standard interface though ....
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Ans : Does not look possible to be .. since there are amny type of addresses in the system all uses the same internal number range. You can utilize some of unused field in delivery address to store the address number of ECC system like Building code , Street_suppl 3 etc ...
However i suggest do not make things complex and keep it simple.
Cheers
Iftekhar Alam

Replication of hierarchical levels labels from ECC to SRM

Hi Gurus!
I am working on SRM 5.0 in Classic scenario and ECC 6.
We are trying to replicate data from ECC to SRM in order to retrieve the same organisational structure as the one existing in ECC in SRM.
We succeed in replicating hierarchical levels from ECC to SRM, indeed we retrieve data of infotype 0001 employee subgroup in table HRP5581-PERSK. But we did not retrieve labels of those subgroups?
Have we missed to customize a filter in tx BD64 in ECC? Or the problem is just that data replication does not send hierarchical levels labels from ECC to SRM?
Please help!!
Thanks a lot.
Regards,
Morgane Chevallier

Hello all!!
Any idea on the subject??
Please help!
Regards,
morgane

Transfer z-table data from ECC to CRM via Middleware

Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
André

Hi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta

Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)

Hello Forum,
I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
In CRM MARA table do not exist.
I need help in transferring data from ECC to CRM using R3AC1 .
This transaction is not in ECC but it is in CRM.
Thanks & Regards
Lovleen

Hello Lovleen,
In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
Thnx.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Vendor Sync Job not updating all vendors from ECC to SRM

The vendors are updated from ECC to SRM by batch job
Z_SUP_BAT_VENDORSYNC (object BBP_VENDOR_SYNC).
This job is missing updation of some vendors from ECC to SRM.
Its happening on and of.We are updating these leftout vendors manually by TCODE BBPUPDVD and new left out vendors by BBPGETVD.
We have concluded that information in these vendors is replicated from
ECC to SRM GUI but it is not reflecting in SRM portal.
Reasons looks like when vendor data(Incoterms/Payment terms) is replicated from ECC to SRM an
addition row is created in vendor data in SRM which does have this information(Tcode ;BBPMAININT).
Though the information is present in second row in vendor data tab of vendor information when executed using TCODE BBPMAININT but Vendor information in portal is picked from 1st row and does not appear when try to shop.
Can anyone suggest how to resolve this?

Hi Harleen,
The problem is because of the inconsistency in the tables BBPM_BUT_FRG0060 and BBPM_BUT_FRG0061.
From table BUT000 take the partner guid for the problematic vendor.
Enter the partner guid as input to the table BBPM_BUT_FRG0060 . check the number of available rows.
Now check the table BBPM_BUT_FRG0061 with the partner guid. check the number of rows.
You must see the inconsistent number of records in these 2 tables for the partner, like 1 row in BBPM_BUT_FRG0060 and 2 rows in BBPM_BUT_FRG0061.
Delete the invalid row in the table BBPM_BUT_FRG0061. That should resolve the problem you are facing.
Regards,
Sapna

Mandatory fields to replicate vendor from ECC to SRM

Hi all,
I created a vendor in ECC with all mandatory fields. But when I tried to replicate the vendors to SRM from ECC, I am getting errors like mandatory fields are missing. Can you please tell me what are the mandatory fields in SRM when we replicate vendors from ECC to SRM. Its Urgent.
Regards,
Balaji.S

Hi Balaji,
When you create Vendors properly in ECC it should not give such an error. You have to maintain basic data, Accounting data and purchasing data. Rest all are optional.
For replicating vendors from R/3 to SRM you should have a Vendor root org / group in SRM. BBPGETVD is used to replicate vendors to SRM by mentioning the logical system and Vendor Group ID.
Hope this makes you clear. Please explain the error clearly for further help.
Award points for helpful answers.
Rgds,
Teja

SEND PR data from ECC to SRM using PI

Similar Messages

Maybe you are looking for