Extract PO Requisitions when PO gets created

Hi,
We have a generic extractor to extract data from EBAN table (PO Requisitions). However our generic extractor has delta set on ERDAT field which is changed date of PO requistion. However when a PO gets created from the requisition from R/3 the PO requisition changed on date field i.e. ERDAT doesnt get a new timestamp.
So we are not able to extract delta's from EBAN table when PO gets created off the requisition.
Is there any way I can set delta on a different field of the EBAN table or is there some standard extractor which can do the same?
Thanks

we cannot create a generic extractor on EBAN table. There are few currency and unit fields, that refer to some other table.so Its better to createa view and proceed.
For creating a view u can check with ABAPer on EBAN, it should be only Database view other views are not supported in Generic extraction
After creating the view, go to generic extraction (RS02) and create Generic data source and save it.Replicate in BW side, then create DSO(ODS) then create Transformation between Datasource and DSO.
Note: Generic extraction give after images. So its not recommended directly to the cube because there is no overwirte option in the cube.

Similar Messages

Purchase Requisition Is Being Getting Created In APO But not being publishe

On doing, SNP Location Heuristics on one of our item, purchase requisition is being getting created in APO (We are able to see the same in RRP3) but the same is not being getting published in ECC. On doing CCR of the said location - product combination, it is showing Error u201C182u201D. We have checked the following parameters :-
Item is an APO Item i.e. X0.
It is having a proper Purchasing Group.
As This be a purchase item. So, it is having a valid single Purchase Info Record.
Item Has Not Been Blocked At Any Level.
Vendor From Whom This Item is being getting procured is also open (Not Blocked).
Please suggest what else to be checked and what else can be the reason for non-flowing of purchase requisition from APO to ECC.
Thanks & Best Regards,
Sanjeev Chugh

Hi Sanjeev,
Please check change pointers if any and send them to ECC. Check the order in the planning book whether it has picked the same source for which there is a Purchase info record. If these all are fine then You send them to ECC from the CCR then check the log in ECC through CFG1 tcode.
Regards,
Kishore k Reddy

Assign roles automatically when user gets created

Hello,
I want to know if there is a way to assign basic roles to all the users in the system when they get created in the back end as well in the portal.
Thanks in advance.

Hi Rahul,
There is no such way to assign automatically basic role to all users. You can go for tool sugested by Alex.
And also you can check one solution if this works for you that we have used in Past and proposed by business. In that if the Basic role is like end user role and needed for all portal users. Then you can create on Template users (Type dialog) . Then you can create the new users by copying the template user.

Auto Script which creates SAP Account when AD gets created.

Hello Experts - Requirement is "Create SAP User account automatically when AD account gets created", can I acheive this through ECATT scripts?
If this is possible, idea is to create an ECATT script and schedule it to run every night to find all new users on AD and create their account on SAP and lock their accounts.
Do you think this can be acheived thru ECATT's?
If not ECATT, is there any way out to acheive my objective. We are planning to reduce overhead for SAP User admins, I was thinking on following steps:
1) New User request for AD
2) After approval create AD account
3) Design a scrip, which will look for all new users on AD and will create & lock them on SAP (Nightly Job or something)
Your thoughts?
Your suggestions are much appreciated.
Thanks.

Hi Martin,
I have a customer with 16 million users in SU01. They don't use IdM and don't need it either at the moment.
I have another customer with 700 users and they are implementing IdM because it makes sense. They need it to reduce complexity.
There are no IdM license costs, unless you provision non-SAP systems.
You can skip GRC by using a well designed concept for report RSUSR008_009_NEW if it meets your requirements - particularly the number of systems. It does however have it's limits (per ABAP client) and is not user friendly at first. Also no nice pie-charts for managers, etc.
Emergency User Access comes in many shapes and sizes... SAP declined a development suggestion from me to improve the "FireFighter" tool so I developed it on my own for my customers using BAPIs and they are happy. The main requiremenent not fullfilled is that the user context changes so that you loose access to HR data, queries, variants, workflow items, purchase orders, etc. The FireFighter users also become obvious targets of attacks and the application users (dialog) need authority to change the FireFighter's passwords to use the application - which means that they can use RFC to do the same without using the FireFighter transactions / logs / etc.
Regarding other IdMs, I have experience with some, but documented here on SDN is only the password syncronization problems which Novell suffers from. These "problems" are intentional - or better said --> their own fault for using "hacks"...
If you search for "Novell" you will find them.
Cheers,
Julius

Automatic AD account creation when user gets created in OIM

Dear All,
Currently in my OIM version 9.1.0.2, AD account creation is request based. Manager has to raise a request to create an AD account for the user.
Now we want to leave this process for AD account creation. Requirement is to create the AD account without any approval process.
Or I can say create an AD account for the user as soon as user gets created in OIM.
Please suggest.
Manohar

Hi GP,
I am able to follow the steps mentioned for creating membership rule and access policy.
Account get created whenever used is added to new group 'createadaccountautomatically'.
However a small trouble here.
Initially resource status goes to ready. I need to select Misallocation attribute in the request form manually. This might be happening because in present request based approval Manager provides the is_location.
How should I overcome this limitation? I mean what change to make so that is_location gets changed automatically.
Please suggest on this.
Manohar

Assign default content type to any library automactially when site get created or people add the library

we are on on premise environment, and we have a requirement that when people create a site or a sub site or even when they add a new document library , we want to ensure our custom content type is assigned as default content type to this library.
the question is that is there any non-full trust solution, i know we probably can do it via feature stapling, or custom site template stuff. but they are NOT considered as we want PLA compliance

Hi,
As I understand, you would like to asscoiate a custom content type to a library when the library is created.
With OOB option, you could try add this content type to an existing library, and save library as template. Then the library template should appear in Your Apps page, that is to say, users can directly create document library based on this template.
As I tested, new document library created based on this template contains custom content type by default.
With programatically methods, please refer to the similar threads below:
https://social.technet.microsoft.com/Forums/en-US/ec9e243b-ea4c-4a46-8780-75a3a5659164/mysite-add-content-type-to-document-library-by-default?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/en-US/e58eb107-daa5-4a51-a139-dca2b1cf8591/set-default-content-type-for-document-libraries-on-a-custom-site-template?forum=sharepointdevelopmentprevious
Regards,Please
remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

User exit/BADI to change the Accntg doc which gets created during Billing

I am trying to do the following . Is this possible ?
When a delivery related billing document is created an accounting document is created in the background , I want to modify the line items in the accounting document, Just before posting the accounting document.
I am using exit EXIT_SAPLV60B_008 as suggested but I don't see the accounting line items in any of the internal tables in this exit.
My accounting document when it gets created looks like this. And I want to modify one of these lines before the document is posted.
Thanks in advance.
Regards,
Ankur Bhandari
1 01 32517 Jaaaa 3,700.83 USD
2 50 3100000 MERCHANDISE SALES 3,199.96- USD
3 40 3100000 MERCHANDISE SALES 160.00 USD
4 50 3200000 DELIVERY INCOME 132.00- USD
5 50 3200000 DELIVERY INCOME 10.00- USD
6 50 2170156 SALES TAX COLLECTED 198.87- USD
7 50 3400000 WARRANTY INCOME 320.00- USD
8 15 32517 Jaaaa 3,700.83- USD
9 40 1117217 RECV. VISA/MCARD Sto 3,700.83 USD
Any answers on how can I delete line 1 8 and 9 and add another line which balances the amount ?
Need to do this just before the accounting document gets generated.
Is this possible ?

Hi Ajay,
I just want throw a light on your issue.
There are couple of other user-exits also available here.
Just check the required data is available or not?
EXIT_SAPLV60B_001              User Exit AC Interface (Header Line)
EXIT_SAPLV60B_002              User Exit AC Interface (Customer Line)
EXIT_SAPLV60B_003              User Exit RW Interface (Cost)
EXIT_SAPLV60B_004              User Exit AC Interface (GL Account Item)
EXIT_SAPLV60B_005              User Exit AC Interface (Accruals)
EXIT_SAPLV60B_006              User Exit AC Interface (Tax Line)
EXIT_SAPLV60B_007              User Exit AC Interface (Customer Line)
EXIT_SAPLV60B_008              User Exit AC Interface Transfer Tables
EXIT_SAPLV60B_010              User Exit Item Table for the Customer Lines
Thanks,
Ramakrishna

Where and when does requisition id gets created when creating from MSS?

My requirement is to have a custom logic on how to assign recruiters to a new requisition which is beeing created from MSS. Once i fill out the form and send the form i get a ref nr for process. What i need is the requisition id as i want to create those recruiters in table HRP5131.
So my question is: when and where is the requisition id beeing created?
Any help will be appreciated.
Thanks

Hi Nahman,
Check the following nodes
SPRO--> Integration with other my sap.com components --> Business packages / Functional packages --> MSS (my SAP ERP) --> recruitement --> Define attributes for request scenario
Select the recruiter logic type. You have an option to use custom logic also using a BADI. other than this there are 3 more options provided by standard sap.
Hope this info helps. Let me know if u require further help on this
Thanks
G Raj

When trying to creat a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem...

Question
When trying to create a desktop icon, it does not go to the URL.....instead I get 'script' and not a website......the script has http//etc but I am not directed to the website......I previously had IE 8 (on Vista).....is that the problem?I do not have any installed plugins....at least none that I know of.....remember I am a new user......Basically, the desktop icon is not going directly to the Mozilla FF to get me to the web site I need to go to.....FF works when I use the Mozilla FF icon.....just not the icons I create.....THANKS!!! I have also tried reinstalling FF and get the same results.....HELP!!!

The address beginning with file:/// denotes a saved file (local file). The file may not be present. You can try dragging the site icon of this page on the left edge of the location (Address) bar and release it on the desktop. Please try opening it. If it still shows an error it could be a problem with the system's zone permissions. You can try setting each zone in the Windows Control Panel or IE > '''Internet Options''' > '''Security''' tab to '''Default Level'''.

I create my apple id from my boyfriend macbook and its says that I have to review my itunes information , when I get to the credit card number info etc. Its keep asking me for that I dont have any credit card and I dont want to put any , what should I do?

I create my apple id from my boyfriend macbook and its says that I have to review my itunes information , when I get to the credit card number info etc. Its keep asking me for that I dont have any credit card and I dont want to put any , what should I do?

You cannot use that ID without a credit card. You did not create your account correctly. There is very specific way in which you must create your account if you do not want to use a credit card. If you don't have a credit card, you will have to start all over again.
1. You will have to sign out of that ID before you can create a new one. Settings>iTunes & App Store>Apple ID>Sign out.
2. You cannot use the email address that you used for the first ID that you created. You will need to use another email address now
3. You have to download a free app in order to start the new Apple ID process.
Read this before proceeding.
http://support.apple.com/kb/HT2534

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

I get this error when trying to create a ringtone - iTunes could not connec

I get this error when trying to create a ringtone:
"iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
But I CAN connect - if I click on the iTunes Store, it connects right away.
I want to make a ringtone from a song that I purchased, but all I get is the same error message.
iTunes 9.2.2, Ireland iTunes Store.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

User Exit IDOC creation - When purchase order gets created

Hi All,
The requirement is whenever user creates a Purchase Order in the current SAP system an IDOC needs to get created and be sent to another SAP system where a Sales Order will be created.
Can anybody suggest the correct User exit/enhancement at the time of Purchase order creation which could be used ?
Also the function modules for creating the IDOCs within the user-exit.
Thanks for your help.

Hi Meghna,
Your requirement is SAP standard function which means you don't have to use any user exit.
What you need to do is configure output control, then when a PO saved, a idoc will send to vendor automaticly.
Here is a step brief
1. configure output type in NACE
2. Add condition record in NACE
3. Setup partner profile in WE20
if you need detailed doc, give me your email, I can send you.
Regards,
Brown

Raise an event when an idoc invoice (INVOIC02) gets created in error

Hi All,
Im trying to generate an email message from an output invoice when processed incorrectly.
I created a subtype of IDOCINVOIC, updated the linkage table using swe2 but the events are not raised when I go to re-issue my invoice output.
I know its possible to raise these events in idoc invoice exit ZXEDFU02 but the status is not created at this stage.
Is it possible to raise an event when an idoc invoice gets created in error?
King Regards
Ann

@CoolDadTX -That's because I've written com servers in the past using VB.net, however they were not registered with the Running object table.
What I'm trying to do in this case is have an application that will be started by the user, and then they will start another application written in .Net to connect to that first application. The reason for this is that we have an application
written in an old version of smalltalk that doesn't seem to support getObject but can create an IUknown, and we already have base classes to attach to COM objects written in .Net. As this new application needs to be started first it can't be tightly
coupled to the legacy application, so we are trying to register the new application and then connect a Dotnet Client that is being started through a COM Interface from the legacy application. I know it's convoluted but we need to keep the legacy
application alive for a bit longer while we rewrite it as an add-in for the new application.
The article that you linked to has been very helpful on the server side, but do you have any ideas as to how I can connect the sink on the client side in C#?

Extract PO Requisitions when PO gets created

Similar Messages

Maybe you are looking for