Extranet Management menu is not available in SAP JAm enterprise edition

We have enterprise edition, but I do not see the Extranet Management Munu in the Admin Section

In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
https://support.successfactors.com
Thank you.

Similar Messages

How to create (or invite) new users in SAP JAM Enterprise edition?

Our client has just purchased SAP Jam Enterprise as they want to integrate it with SAP Cloud for Customers (collaboration on service ticket resolution across departments).
I have just logged in with the administrator account to what appears to be a SuccessFactors homepage. I can see how to get to Jam or to the Admin console. But there is no obvious way of creating new users so we can start running demos with the client.
The JAM administrator guide does not seem to explain how to do that ???
Does anybody have a quick tutorial on this topic?
Cheers

Hi Thierry,
there are two guides which help you through the basic steps:
At http://service.sap.com/rds-cfc-erp you can find a guide which describes the basic steps to configure SuccessFactors Platform including user management as a base. The document is part of a ZIP available in service market place and is called "Setting up SAP Jam for Integration with other SAP Solutions".
Please be aware that this guide just covers the minimum steps. For a complete introduction we strongly recommend to register for the SAP Jam Academy and SuccessFactors Academy course available for partners.
In addition there is the INTEGRATION: SAP Cloud for Customer + SAP Jam Guide available in servcice market place describing the actual configuraiton steps required for Jam/C4C integration: https://websmp206.sap-ag.de/~sapidb/012002523100002165402015E/1502_Config_CRM_HCI_COD.pdf
Hope this helps,
Ingo

Menu option not available in SAP GUI transaction in Portal

Hi all,
When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
How can we enable the menu option in Transaction iview in Portal?
Plz find the attaches screen shot of error.

Hi Chandra,
Can you try the same senario with broswer compatible mode?
Because these function will be over ride the style sheet.
Thanks
Patrick

Crystal Report menu-item not visible on SAP menu of client

SAP 2007A SP:00 PL:38
Crystal Report 2008 (on start menu)
Crystal Report 2.0.0.6
1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
2. Installed Crystal Report on one of the clients and it works fine in same way.
3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5 run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
b) However, in Add-on Manager, Crystal Report does not show at all.
c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
d) OS is Microsoft XP.
How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
Thanks, Ajay Audich

Hi,
1) On Add-Remove Programs on the client, I see the following:
Crystal Reports 2008 Runtime
Crystal Reports Basic 2008 for SAP Business One
Microsoft.NET Framework 1
Microsoft.NET Framework 2.0 Service Pack 2
Microsoft.NET Framework 3.0 Service Pack 2
Microsoft.NET Framework 3.5 SP1
SAP Business One Crystal Reports 2.0.0.6
2) The settings are:
Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
User Preferences Tab-User RT-Preference is set to Default.
On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
3) The user RT on the client is a super-user.
Thanks.

"Always Available off line" menu item not available for user on computer where another does see it. This is on Active Directory Computer

I have a lap top that I want to add files via Always available off line.
When I logon and right click on a folder share I can see the menu item all was available offline. When the user logs on this option is not available. I have turned the feature on and off, rebooted, I have deleted the cache folder but I cannot
see how to get this menu item to show up. It's odd that it shows up for one user but not another on the same computer. I have searched the web and tried the above things and others but cannot seem to resolve this problem. It seems pretty
common and their. This computer is on a domain.
thanks.

Hi,
So as we edited the group policy settings in the default domain policy, the menu item is now available?
And as we are in a domain environment and the settings is configured under the default domain policy, how the domain users behave different from each other? Which someone could see and the other not？
Could we please generate a
GPO report to take a check?
And regarding group policy issue, it is recommended to seek help in the group policy forum, experts there may share some insights:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Best regards
Michael Shao
TechNet Community Support

Site Manager Menu option not there

I watched the BC gurus tutorial and looked at online docs. There is no Site Manage> Menu option in the manage area for this site. It makes it impossible to add or modify menus. The Content Holder gives no options to create specifically a menu.
This has to be easy or it is really a bad change. It is easier to develop in DW than BC. That is not good.
I'm the admin and logged in as admin.

IF you are a paid partner and set up an account you get everything out the box and you should see menu under the site manager like any other. If you are using a creative cloud site these are ONLY webbasic so you wont see anything other then the real basics.
Like Sanjit has said, if you do not feel this should be the case on that site, contact support.

Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available

                   Dear Support,
                   I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
                    Any help would be really appreciated.
                    Best Regards,
                    Roberto López.

Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto.

OM_Concurrent manager menu is not appearning in Responsibility

Hi Oracle Gurus,
I have created responsibility for Orader management and given Menu as ONT_SUPER_USER for running concurrent programs but most of concurrent programs has not been assigned to this user group.
If I check vision operations responsibility "Order management, Vision operations(USA) menu is ADS_OM_SUPERMENU but same menu is not appearing in UAT/ CRP instances, we are finding very difficult to get concurrent programs.
If anyone know how to get ADS_OM_SUPERMENU assignment to get the menu in list of values, please advise the setups, step to be followed.
Responses are highly appreciated.

I have created responsibility for Orader management and given Menu as ONT_SUPER_USER for running concurrent programs but most of concurrent programs has not been assigned to this user group.What do you mean by user group? Did you mean to say Request Group?
If I check vision operations responsibility "Order management, Vision operations(USA) menu is ADS_OM_SUPERMENU but same menu is not appearing in UAT/ CRP instances, we are finding very difficult to get concurrent programs.Please verify the Request Group instead of the menu as the menu shows what forms/functions you can run from the responsibility but not the concurrent programs.
If anyone know how to get ADS_OM_SUPERMENU assignment to get the menu in list of values, please advise the setups, step to be followed.
Responses are highly appreciated.If you want to transfer the menu, then use FNDLOAD or create it manually.
How To Download a Parent Menu and Submenus [ID 369421.1]
Tips About FNDLOAD [ID 735338.1]
Replicating Custom Menu [ID 839879.1]
Thanks,
Hussein

Reports Menu is not available in Websheet Application

Hi All,
I have installed APEX 4.2 in oracle 11g database 11.2.0.1.0 using Embedded pl/sql gateway method.
But When i am trying to create Reports in Websheet application, there is no menu name like reports.
Please help me to create reports in Websheet application.

In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
https://support.successfactors.com
Thank you.

OSS note 1135038 not available on SAP service marketplace

Hi,
I am unable to get OSS note 1135038 from SAP service marketplace. When I try to open it I get the message 'The requested SAP Note is either in reworking or is released internally only'.
Can somebody help?
Regards
Rajaram

Did you get this note number today by searching in SAP support portal?
It is either abandoned, or applies to one customer (only the customer is able to see it), or SAP is maintaining it and you should wait. Open a message if you have an express need, or if this note is in rework status since many days.

Corporate Finance Management - Extractor R3 not available

Dear All,
I am trying to install CFM business content on BW.
All element are available on the BW side.
But unfortunately the R3 extractor for this area are not available.
Do you know how to activate extractor on the R3 side ?
Thanks

Hi roberto,
I've check R3 status i've got this
PI release 2004_1_470 level 2
EA-FINSERV release 200 level 2
Is my finance version ok ?
With business contents R3 extractor are their always available ?
Many thanks,

Hp 3653 driver not present in windows 7 enterprise edition.. Not available on HP site also.Where?

Need to locate HP driver for HP inkjet printer 3653 for windows 7 64-bit enterprise edition. HP site does not have one. The OS on my laptop does not have one. Appreciate if HP can make this available. thx.

I have a similar problem. There does not seem to be a way to get the Windows 7 driver for my network connected HP laser Printer. HP seems to have the driver, but the software you are supposed to download won't let you install it because the printer is not installed on the Windows 7 machine, but on another computer on the network. Windows 7 won't install the printer without the driver. Catch 22.

Folders not available in SAP Business workplace(SBWP)

Hi,
When i click on any of the folder in SAP Business workplace,the folders are getting disappeared and i am getting the message "Folder inbox no longer available".
Please let me know if any one you have faced the same problem.
Regards,
Kumar

Hi,
I have already refferd this Note,but this doesn't solved my problem.
Please let me know if there is any workaround for this issue.

No color management option is not available in photoshop cs5 mac

Currently have CS5 for Mac; upgraded to Mavericks and now the "no color management option" in the print dialog box is not selectable. Any help with this please advise.

If we're looking at the same thing that's greyed out (the Color Mode setting for an Epson printer), to make that active you have to first choose Color Matching, which is in the same menu that Printer Settings is on, and then choose Epson Color Controls. But on my Mac, Color Mode is already set to "Off (No Color Management)" even though it's grayed out.
If it says "Off (No Color Management)" in the printer driver and at the same time Photoshop is set to "Photoshop Manages Colors" and the correct printer profile is selected in Photoshop, you should be fine.
It's important to note that the only purpose for the Adobe Color Printer Utility is to bypass OS color management in order to print targets for printer profiling, not to print actual images. If you're trying to print an image, you shouldn't be using the Color Print Utility. The utility won't add back a No Color Management option to Photoshop itself, because that option has been permanently removed.

Help menu items not available Logic Pro 9

I think this problem occured after upgrading to Mavericks. When I use the help menu in LogicPro9 and click on the most relevant keywords that I have typed I am presented with a dialog that indicates: "The selected topic is currently unavailable. The topic you were trying to view could not be found."
I think this may be related to Spotlight not being indexed properly. After having problems re-indexing Spotlight I finally realised that in order for Spotlight to re-index correctly I had to add my permanently installed SD card to the Spotlight Privacy eclusion list. Instead of Spotlight taking 5+ hours to re-index a fast SSD it now did it in about 10mins.
I am now confident Spotlight has re-indexed successfully.
But the help menu items are still "unavailable"
OSX 10.9.1
MacBookPro Mid 2012
Logic Pro 9.1.8

I'm still putting this question out there to anyone who can help solve this problem. After trashing the Logic Pro9 App from the Finder>Applications I visited the Mac App Store and under the Purchases icon I re-installed Logic Pro9.
The Help menu is still returning:
"The topic you were trying to view could not be found." when clicking on the suggested returned results in relation to my search keywords.
I know there are better resources out there but I find it handy to use the help menu instead of reaching for a book or website/weblink.
Eventually I will switch to Logic Pro X but as Lennar Digital is still finalising their 64Bit version release of Sylenth (popular soft synth) I will wait until that is completed later in the year.

Extranet Management menu is not available in SAP JAm enterprise edition

Similar Messages

Maybe you are looking for