F-58 check print program

Dear Exports,
Where we can assign program for check print for transaction F-58, or where we can see the program assignment for transaction F-58.,
Can we assign same print program for F-58 and F110?
regards
babu..

Hi Surendra,
You can assign the same program for both F-58 and F110
You assign the Check printing program in FBZP> Payment Methods in Country( Double click the country and payment Method combination and add Payment program in Payment medium Program at the bottom.
And you assign the forms for cheque also in FBZP>Paying Company Codes.
Regards,
SAPFICO

Similar Messages

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How to print Signature stored in a flash drive on to check print program?

Hi,
I have a check print program template and have the following requirement. I need to print the signature image which is stored in a flash drive that will be inserted in to the check printer (HP laserjet 4250 series). The vendor sent the escape sequence to activate the signatue image. I'm familiar with how to print images stored in $OA_MEDIA area but not in a flash drive.
Has anyone done this before? If you did, could you please let me know how and where to put the escape sequence the vendor sent on the .rtf document to activate the signature image while the check print program is run (Format Payment Instructions - in rel 12) ?
Message was edited by:
user586895

Hi,
This is an interesting problem, and not something I have considered before. I do not know of an exact solution, but as your printer is on a network, theoretically it will have an IP address. When your flash drive is inserted into the printer I would assume that is is treated like any other drive in a PC, so you would be able to use a URL to get to it.
Using a dummy image and a URL to the printer flash drive you should be able to pick up the image.
Not entirely sure if this would work, but it may be food for thought, and help you along the way.
Regards,
Cj

Check print program prints an extra page...

Hello Experts,
I have a dillema here wherein I cannot customize the standard check print program RFFOUS_C. When I check
the spool, it always prints an extra page even though the prior page does not overflow. I also do not
have any explicit NEW-PAGE or related code.
Have you guys encountered this?

Hi,
1. Go to SM37 and check the Job log, is there any other program is triggering.You need to check the FBZP, for is there any other form is configured.
2.In the selection-screen you need to make sample printouts as zero.
Regards,

Check printing program

Hi Experts
Does any body provide me a program of check printing.
As i dont wanna to creat it again.
Thanks
Abhi.

Hello,
There are number of check printing programs available.
Go to SA38
Put RFFO*
You will get number of check printing programs available in the system.
If they are not suitable then you can copy them and modify to your requirements.
Regards,
Ravi

Format Payments check printing program completes in warning APP-FND-00500:

Hi All,
I'm in process of converting Oracle Payables check printing from reports 6i to XML publisher.
I created template, data definition and changed the output for concurrent program to XML.
I tried printing check and 'Format Payments (Evergreen)' concurrent program completed with warning.
Log file has following error.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. An error occurred while AOL tried to spawn the print process
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. An error occurred while AOL tried to spawn the print process.
Any one there has any idea what this error is for.
Thanks
pallavi

This could have something to do with the fact that your printer is not set up correctly. Can you run a plain text (OReports) file output to the same printer? If not, then the printer is not set up in FND correctly. If you can ...
Remeber that unless you have a more modern printer that can handle PDF documents natively then XMLPs PDF is going to need to be converted to PS or PCL. I would suggest you investigate the PASTA printer driver and get that set up. It provides the ability to call a program pdf2ps for instance, to convert the PDF to PS. There is a bunch of info on metalink
Tim

[Urgent] How to print Line items Twice in Check Printing ??

Hi Experts,
We have got a requirement of printing the vendor invoice info(Line Items) above and below the actual check.
Eg.
Page 1
1-8 Line Items
Voided Check
1-8 Line Items
Page 2
9-16 Line Items
Voided Check
9-16 Line Items
Page 3 ..... (last Page)
17-20 Line Items
Actual Check
17-20 Line Items
Now, All the things are printing fine except dual printing of the Line items at the below of Check.
Please help me..... i am using Check print program RFFOUS_C.
If anyone can has done something like this before than please send me the code for it.
If someone requires more clarification, please ask me.
Regards,
Abhishek

Hi Abhishek,
we have done check printing here. but can u pl tell me why is the line item required to be printed below the check also??
u must have observed that in the check sapscript ( F110_PRENUM_CHCK), the main window is situated above the check window.. n the line items are coming within the main window...since the line items are dynamic data( not fixed), u have to create a window below the check n that has to be a MAIN window again for it to display multiple data.. so wen ur last page is getting called ( u need to find that out that wen is the last page getting called ), u can insert a write_form for this new main window along with the other write_form( for the earlier main window).
it can get very complex though as i dont know if this will certainly work...
is the requirement reaaly to print the line items below the check or anything else will do?? as it wud greatly reduce ur headache...

Oracle XML to HSBC XML mapping for R12 AP Check Printing

Hi,
Our environment is Oracle APPS R12.
We need to send an electronic payment information to HSBC bank. So this will be generated 'like' a check from the payments process, but for payment types of WIRE, ACH, etc...and the output is an XML file in a format specified by the bank HSBC. We need to send an XML file to HSBC per their spec. The data that needs to go in this file is the same payment information that Oracle already provides in the standard check printing. We need to take that data and turn it into XML matching the HSBC spec (hence the XML to XML mapping).
I am not sure how to get the source for standard check printing prog. Any idea of how to do Oracle XML- HSBC XML Mapping? Any help is really appreciated.
Thanks
Valli

Review this note, you will get source of check printing program
R12: Master Troubleshooting Guide for Oracle Payables Check Printing issues (Doc ID 1353280.1)
thanks

Third Party Printing Software recommendations for Oracle R12 AP Check printing

We currently use Formscape for check printing in Oracle 11i. upgrade to R12 , Oracle AP checks are PDF and we are looking for alternatives for third party tools.
Any recommendations are appreciated.

Review this note, you will get source of check printing program
R12: Master Troubleshooting Guide for Oracle Payables Check Printing issues (Doc ID 1353280.1)
thanks

Check Printing - PDF displays fine, Printer prints PS Code

We are using XML Publisher 5.6.2 to build the check printing program.
The template is working fine and we are able to see the checks with
MICR thru the request output ( as PDF ).
Now, we need to print these checks directly to the printer and as per
the metalink note 338990.1, we installed PASTA and XPDF. The output
is now converted to PS and also sent to the printer.
However, the printer prints the PS code instead of interpreting the
PS and printing the check output.
The printer has been setup on unix (AIX 5.3) as a PS printer, however
even if we try the command line lp -dchkprint1 testXML.ps, the code
is printed and not the document.
Can anyone pls provide some insight into either printer setup or any
additional steps required other than PASTA / XPDF and printer setups.
Thanks & Regards,
Nishant Killedar

Hello
try to reset printing system
goto printer and fax system pref
then hold "alt" key and click "minus" button to reset printing system
then try to reinstall xerox driver but driver seem to be a little bit out of date only for 10.6
File Download: Driver Installer Package for Mac 10.6
Filename Phaser8550_EN.dmg
Date Sep 21, 2009
Size 13.2 MB
Apple Installer Package for the Phaser 8550 supporting Mac 10.6. ""
after install BE sure to update your system apple may have produce a printer driver for this model
Pierre

Print Check-Copy (Non-Negotiable) after every check print

We are implementing Std. R12.0.6 AP Check Printing.
I've designed standard BI Publisher RTF to print the Check and Check-Copy without any issue.
My RTF Template has Check design on first page and Check-Copy (Non-Negotiable) on second page of RTF. Std. Conc. Prog. Payment program FORMAT PAYMENT INSTRUCTIONS automaticlly will be printnig the Checks after paying the Vendor, there my RTF is being used for printing through PDF.
Issue is Both Check & Copy are by default getting printed from Tray#3. But the requirement is Check to be selected from Tray#2 and its Check-Copy should be selected from Tray#3.
Note: output PDF is NOT considering the Print setups made in RTF.
My question is:
(1) How can we Print Checks from (Check Stock) Tray#2 and Checks those Copies (which are Non-Negotiable) from
Tray#3

Hi,
Check printing is a different scenario in Oracle, since the concurrent program is launched as a part of the payment process.
If the concurrent program is submitted manually then we could have manipulated it by wrapping in a different program and then calling two different concurrent programs having its output from two different trays, but in check printing scenario we don't have a work around.
By modifying the seeded code you should be able to achieve this: [Non recommended solution]
     1. Create a wrapper program [call seeded check printing program (program 1) then a custom program (program 2), program 2 will print the non negotiable document ]
     2. In the seeded code modify the concurrent program call to your wrapper program call.
NOTE: EVERY TIME WHEN A PATCH IS APPLIED TO AP OR IBY modules, care should be take to reflect the custom change.
Hope it helps, Thanks!
Please find some useful references in this regards:
     How To Set The Printer Tray When Sending Concurrent Output To Printer [ID 740539.1]
     How to Specify a Printer Paper Tray With Pasta [ID 241086.1]
     How to Use Hewlett-Packard Printers with Multiple Paper Trays When Printing Requests. [ID 147712.1]
     What are the Common PCL5 Printer Commands for HP Laser jet Printers [ID 135990.1]
     How To Setup Custom Pasta A4 Print Styles And Drivers [ID 763274.1]
Regards,
Yuvaraj

Standard SMARTFORM for Check Printing/ Payment Advice

Hi All,
I have one important question...
Standard Script Check Print Program = RFFOUS_C
Standart Script Layout Name = F110_PRENUM_CHCK
& F110_D_AVIS
We have to modify it as per client requirment.
But I want to know the Standard SMARTFORM & Standard Smartform driver Program for CHECH printing & payment advice ?????????????
Is there no Smartform for check printing or if exist then please guide me?????????????????

hi umesh,
1)anyone can help me,while extending idoc,i added one segment to idoc by extending debmas.that segment has two fields.while populating data to idoc,i am getting problem like VSV0001.exit is not allowing me to write the code.
plz anyone can help me on this issue.if you did't understand this problem plz tell me how to extend the idoc.more concentration on while populating the data in to idoc.like which function module i have to use.in customer master idoc.debmas.i am new to this environment.plz help me.like complet work till completion of task.
2)and my next assignment is in smartforms.plz let me know .i was created the screen.according to that screen.i have to make print program.plz tell me how to give the text elements.
like we have given in scripts, page window and then F9 to give the text elements.and make the program.like that any one can tell me clearly.how to make the complete smartforms programs.
plz this requirement is very very urgent,plz could you send it for my [email protected]
advance thanks for your help.
thansk&regards,
radhiks.

Confimr check printing

Hi team
i am trying to simulate check process.
i processed payment in F110. and clicked printout tab and gave print.
however nothing came out from printer.
not sure if it got printed. when i go to FCHX to extract check, it says no matching data.
i need to check how to see if a check was printed. ther shoudl be soemthing rt? we cannot go on reprinting already printed check......coudln't find though, so seeking help. tcode and / or table name would be helpful.
regards
Kavana

Hi,
Go to transaction FCH2 and check whether the check present for the F110 payment document.
If not, then it means no check created for F110 payment. Then you need to check:-
(1) Whether a suitable Check printing program is assigned to the payment method in FBZP
(2) The variant setting in the printout tab of the F110.
(3) Whether the printer setting is correct to trigger the check from F110 to your printer. You can take the help of BASIS team for it.
Regards,
Gaurav

Check printing using smartform

Hi All ,
I have urgent requirement that to convert standard check
printing program to our custmized check printing program using smartform .
Please suggest the way , how we can do that?
Regards
Mohit Bansal

Hi,
For Creating custom check printing you need to do following steps.
1. Create Custom page format using SPAD.
2. Created smartform layout using custom page format.

Explain flow of standard cheque print program

Hi All,
Can anybody explain the flow of standard cheque print program RFFOUS_C.
The standard cheque print program will use Z form layout to print cheque and remittance advice.I have to add few form routines for RFFOUS_C. Also explain the functions of below mentioned form routines.
Form routines:
FM_CHQ_AMT
Move protective u201C*u201D from field REGUD-SWNES and load value into AMOUNT_CHEQUE.
FM_REMOVE_STAR
Move protective u201C*u201D from field REGUD-SWNES and load value into AMOUNT_FIXED.
Append the currency to the end of the value in AMOUNT_FIXED (if Currency = ZAR u2013 append the value R)
FM_CHQ_AMT_WORDS
u2022 Remove extra spaces from the amount in words
u2022 If currency = ZAR insert the word RANDS after the Rands amount else insert the value in field REGUD-WAERS
u2022 Combine Rands value and the cents value with the text -AND- (i.e. Rands value u2013AND- cents value)
u2022 End the cents value with the text CENTS
u2022 End the amount in words with the text u201C-ONLYu201D.
u2022 If the amount text is longer than 52 characters split the text into two lines (line 1 (AMOUNT_WORD_1) may hold 52 characters and line 2 (AMOUNT_WORD_2) may hold 62 characters u2013 maximum capacity for writing cheques).
u2022 Overlay any spaces with the character u201C|u201D

International Payment Medium - Check (with check management)
Description
This program prints prenumbered check forms or non-prenumbered checks whose number is to be assigned from a predefined number range, and links the check number to SAP payment document number or the check number to the settlement result.
In addition to the checks, you can print their payment advice notes and payment summaries in one program run.
Requirements
Check lots
The checks which are ready for printing are divided up into lots. The user can freely define the criteria by which lots are formed (for example, location of check storage, accounting clerk or printer). The check numbers of a lot must be consecutive.
A lot is assigned to the checks to be printed via a parameter whose number you define via the corresponding check lot management in the system.
After entering the lot number, the print program independently searches for the first free check number (even if this is in the next lot rather than in the lot specified).
Payment Program Configuration
The parameters that control the way in which the payment medium programs function are configured in Customizing. For more information on configuring the payment program, refer to the Implementation Guide.
1. Here you need to make specifications for the paying company code. To do this, select the relevant paying company code by choosing Paying Company Codes ->.
If payment advices are to be printed, define a SAPscript payment advice form for use with all company code payment methods. You will find the form F110_D_AVIS as an example in the standard system.
You need to create and enter text modules in which the texts for the header, footer, signature and sender are stored. These modules can be included in the forms when they are used. To do this, choose Sender Details, from where you can also branch into text maintenance by selecting the modules. The names of the text can be defined by the user, for example F_0001_HEADER for the letter header in company code 0001.
2. Here you need to allocate the name of the payment medium program RFFOUS_C to the payment method to avoid incorrect payment media being issued with another program by mistake.
Furthermore, you can enter a short name (or 'print dataset', for example LIST1S) which makes it easier to find the generated forms in the print manager.
To do this, first choose Payment methods in country, then select the country of your paying company code and the payment method you require, and then maintain the data necessary for printing the form.
3. Here you need to make company code specifications for the payment method. To do this, choose Payment Methods In Company Code, then select the paying company code and the payment method. In this menu maintain the following data by choosing Form data or Payment Advice Control:
The SAPscript form for payment media (F110_PRENUM_CHCK in the standard system).
The issuer data.
Sorting the correspondence.
Sorting the line items.
The number of note to payee lines on the form and the payment advice note output in accordance with the specified number of lines
If you specify as many as required note to payee lines on the form then Payment Advice Output According to Number of Lines controls whether in addition a payment advice is always created or not.
Note: The issuer details are used on the payment medium for city and signature in the standard system:
Line 1 Name 1 of issuer
Line 2 Name 2 of issuer
Line 3 Blank
Line 4 City.
Setting up and changing the SAPscript forms (layout sets)
The following describes the layout of the SAPscript forms in brief. If the forms available in the standard system are sufficient for your requirements, you can skip this part of the documentation.
You can find further information on forms and the SAPscript editor in the guides on styles and form maintenance and word-processing in the SAPscript editor: Select the menu path Help -> SAP Library.
1. When setting up SAPscript forms (layout sets), symbols are included in the text; these are then replaced by actual values when the payment medium programs are run. The fields which can be used for this are defined in the Repository and contained in the following structures:
REGUH Settlement data from the payment program
REGUP Edited invoice items from the payment program
REGUD Formatted data for printing the forms
SPELL Amounts and digits in words.
FSABE Data on accounting clerk.
Note that check forms can be issued in foreign currency only if the currency key is also printed on them. If forms are only to be filled out for local currency checks (on which no space is defined for the currency key) then you should remove the symbol for the currency key &REGUD-WAERS& from the check window. The program then prevents you from printing foreign currency checks.
2. If you want the document long text for an accounting invoice document to be printed on the payment advice form, you must make the following enhancement in element "Long text for invoice document" (specially designed for this purpose):
/: DEFINE &TXT& := '&REGUP-BUKRS()&&REGUP-BELNR(RF0)&&REGUP-GJAHR&'
/: INCLUDE &TXT& OBJECT BELEG ID xyz
The text ID that you must enter for this text (xyz) is defined in the configuration menu and can be read from there. In the standard system, text ID 0003 is predefined for the payment advice information.
Periodic processing
Before the payment medium programs can be started, the payment program run must have been successfully completed. Check the status of the payment run, or schedule the payment medium programs by specifying one or more variants.
Note: If you want to use th 'Payment document update' option, the payment documents must be updated between the time of the payment program run and the time of the payment medium program run.
Output
Forms and lists
Printout files are created per company code and house bank. These can either be printed via the print manager or immediately. Depending on the parameter you select, you can print out one or more of the following:
Payment medium
Payment advice notes (if the information cannot be sent via EDI)
Payment summary
Error log
The number of output files is specified in the flow trace; this makes finding and allocating them within the print manager easier.
Note: If the program was started online, then you reach the print manager from the list by selecting one of the output files displayed.
Payment Advice Notes
In addition to being able to print payment advice notes, you can also send these via EDI, fax or email.
1. To send a business partner a payment advice note via EDI, you need to select the indicator Payment advice note per EDI and maintain the partner agreement on screen "Payment Transactions Accounting" in the master record.
Using an external converter, the IDoc created by the program can be converted into the EDI format you require (REMADV for example) and then sent.
2. To send a business partner a payment advice note by fax or email, you must use the process interface 00002040 (Business Transaction Events) to define the selection of the message type (printout, fax or email). Before you can do this, however, you must have carried out the necessary technical (Basis) settings for faxing or sending emails.
Process interface 00002050 can also be used to change or configure the print parameters and the parameters for optical archiving for payment advice notes.
Check management
You can access information about the issued checks via check management, line item display for sub-ledger or bank accounts, or invoice and payment document display. A check register list can also be created for the respective payment run. Errors occurring during check number and document number allocation can also be rectified using check management. You can find check management within Accounts Receivable or Accounts Payable, both parts of Financial Accounting, as well as under the "Environment" menu option in the payment program.
For more information on check management, esp. about detailed solutions to possible error situations, refer to the FI Accounts Payable manual under Help->R/3 Library.
Error messages and error log
Termination of processing
You can find out the reason why processing was terminated (for example, production run not yet carried out, form does not exist or is not active) by looking at the error message or the related long text.
Internal SAPscript error
Check the layout of the forms. It must fulfil the above-mentioned conditions. You cannot, for example, create a bank transfer with the check print program, since bank transfers and checks have a completely different layout structure.
Error log
If errors which do not terminate the payment medium program occur when creating the output, the system lists them in the error log. If such a log is created, you must look it over because only you can decide whether the payment medium or payment advices are useless due to the errors the system finds, and decide whether they must be recreated after the errors have been rectified.
During background processing, the system outputs the error log twice, in the flow trace for the job and in a printout file. The flow trace contains information on how to rectify the errors (from the error message long texts).
You can display the long text online by choosing the error log from the list of generated output files and then the error message in question.
Close the thread once your question is answered.
Rgds,
SaiRam

F-58 check print program

Similar Messages

Maybe you are looking for