F110 proposal (Open items include document currency and Local Currency)

Hi All,
I have a vendor for which there are 20 open items, out of which there are credit memo's as well as vendor invoices. Vendor is a Newzealand vendor.
Invoices details are given below:
1) some of the credit memo's have Amount in NZD and the corresponding Amount in LC (Local currency, in our case USD)
2) some of the credit memo's have Amount in USD only.
3) some of the Invoices have Amount in NZD and the corresponding Amount in LC (Local currency, in our case USD)
4) some of the Invoices have Amount in USD only.
When user ran a F110 proposal for this vendor and we are trying to pay in USD, all the open items went into exceptions.
In the proposal the amount for the document, it gives the amount which are in NZD (Or the document currency amount).
Please let me know how to proceed without having these invoices into exceptions and to pay these invoices in USD.
Thanks
Rajanikanth

we have cancelled all the documents and re-entered in USD and paid in USD.
Thanks
Rajanikanth

Similar Messages

  • SEM -BCS Trasaction currency and Local Currency

    SAPGURUS
    I have one issue , When the users are doing Half yearly BCS they see  that for one company code for one item period values Local currency is diifeernt from
    Transaction currency .
    My question is why this Transaction currency is different from local currecny.
    How to rectify this .
    Are they  missing any exchnage rate conversion .
    Thanks in Advance .
    are they  missing any exchnage rate conversion .

    Hi Dan Sullivan
    Thanks for the quick reply .
    One more question .
    I see in the BCS  T Curency as Euro and Local currency as Euro .
    but the period values localy currency is different from Transaction currency .
    I think the values should be the same if both T Currecny and Local Currency is same .
    I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
    I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
    I would like to know what would be the cause for the above .
    Thanks in Advance .
    Ravindrareddy.P.

  • In Journal can i specify the Foreign currency  and local currency amount?

    In Journal Entry can i specify the Foreign currency amount and local currency amount?
    I tried the following code it is working fine using DIAPI.
    Here the Local currency and the System currency is SGD. And the Journal is for USD.
    oJnl.Lines.FCDebit = 120.10
    oJnl.Lines.FCCredit = 0
    oJnl.Lines.FCCurrency = "USD"
    oJnl.Lines.Debit = 120.10
    oJnl.Lines.Credit = 0
    oJnl.Lines.Add()
    oJnl.Lines.FCDebit = 0
    oJnl.Lines.FCCredit = 120.10
    oJnl.Lines.FCCurrency = "USD"
    oJnl.Lines.Debit = 0
    oJnl.Lines.Credit = 120.10
    oJnl.Add()
    But, the above way of doing is not working if i pass this Journal through B1.
    B1 is not allowing to change the local currency amount, Local currency amount is automatically calculated based on the FC amount and the Exchange rate.
    So Can i use the DIAPI to do this? is this right to do?

    Solved.
    In Journal Entry window, please kindly go to Form Settings/Document/
    Table tab page/ Convert Amounts According to Rate upon Exit:
    Clear the checkboxes 'From LC Field' & 'From FC Field', then the Local
    currency amount will not be automatically calculated based on the FC
    amount and the Exchange rate.

  • How to show both SC and Local Currency in PLD at Amount place?

    Hi sir,
    I want to show both System Currency and Local Currency in PLD at the Amount Place.
    And amount in Words also.
    When i preview my PLD Report than it show the both SC and LC in Words.
    So,plz help me sir.!

    Hello jyotasna ,
    Docuement total always in one currency depend on selected Customer or Vendor and if you want to in two currency then you should make UDF(User Define Field) for other currency.
    also make FMS for calculation in this UDF .
    If you want to amount in word in PLD then you should use ,select option Amount in  words
    for this configuration  you should need workaroud.
    Thanks
    Manvendra Singh Niranjan

  • Actual Costing - CKME update in group and local currency - split

    Hi Experts,
    We are using Actual Costing and running CKMLCP and CKME to update our standard price, in local currency and in group currency.
    The result it is one PR accounting document, with group currency and local currency booked in it.
    Now, we have this requeriment where they want to have 1 PR document with local currency booked and $0 group currency and another PR document with local currency as $0 and Group Currency booked.
    It is like doing MR21 and not doing automatic translation into foreign currency, that is what we want.
    So, the question is, Is there a way of archiving this in a simple way?
    Thanks for your comments!
    Enrique

    Hi Enrique,
    The final step in CKMLCP enters future prices for all materials based on the actual prices of the period.
    You could Use CKMPRPN the 'maintenance of future prices' with it's rule based approach to change the data before activating with CKME.
    You could
    1. delete the group currency future prices (CKMPRPN)
    2. release the new standard prices in company code currency (CKME)
    3. create future prices in group currency by adopting the (previous month's) V-price as future price (CKMPRPN)
    4. release the new standard prices in group code currency (CKME)
    I am not sure if you could  also distinguish the validity dates between both currencies with CKMPRPN. If yes, that might be better than deleting and rebuilding the price.You could change the date for one currency into the future, use CKME, change the date back and use CKME again.
    A disadvantage of the procedure would be that you will not release the cost component split from CKMLCP. In step 4 only the new price will be released and the split will be created from the former split. In step 2 the original split from CKMLCP will be activated.
    best regards,
                 Udo

  • Standard Report for Payment Proposal:Open Items

    Hi all
    Is there any standard report for to display Payment Proposal:Open Items?
    I know we can see them in F110 but I am wondering if there's other related report.
    Thanks in advance.
    az

    Hi,
    Check following report. it may help you
    S_P99_41000099 - Payment List
    Regards,
    Jigar

  • Transfer Open Items to Intercompany Customer and Vendor (Account payable)

    Hi,
    I'd like to know the transaction to Transfer Open Items to Intercompany Customer and Vendor.
    Thanks a lot!

    you need to have the intercompany settings in place and if they are there then you can youse all SAP transactions for your entry, Use F-02 or FB50 with the cross company compnay code as input for the 2nd line item.
    reard points if useful.
    sarma

  • F110 Auto payment with Check in foreign currency and Doc currency is LC

    Hi Guru,
    When I try to use auto payment for document currency in local currency, while check is foreign currency, it always in the expception list, could you advice how to handle this scenario. thanks.

    Hi
    From the log you mentioned check for the following things:
    In FBZP -bank determinationin Ranking order---Pymt-C with currency USD and rank order 1 and housebank has been mentioned.
    In bank accounts in the dialogue module below ranking order the entries are made for bank account for the above.
    and in available amounts make the suficient amount available for this bank
    Also Check whether the Payment method C and the housebank details are mentioned in Vendor master record.
    Regards
    Aravind
    Assign points if useful

  • I bought a macbook pro as an open item in best buy and it doesn't come with garage ban, iMovie, iphoto, numbers, etc. what can I do?

    I bought a macbook pro as an open item in best buy and it doesn't come with garage ban, iMovie, iphoto, numbers, etc. what can I do?

    it wouldnt come with numbers, only iphoto, imovie, and garageband.  Have you tried this?
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.

  • Doc. currency vs local currency diff in parked document

    Hi Team,
    i was parked a document with document currency USD, but the local currency is CAD.
    when i opened the parked document, document in USD currency showing debit and credits are matching woth zero balance, but when i clicked on local currency the document is showing 0.03 difference.
    any suggestions(i used 4.5 version)
    thanks,
    Ravi

    Hi, Ravi:
    In F-63, there is a checkbox "Only transfer amnts in document curr. invoice", it is used as followings:
    If we sets this indicator it translates the doc. currency into local currency at the time of parked document.
    If we not set this indicator it translates the doc. currency into local currency when posting of document.
    Eg: We are parking a document with doc. currency in USD @40
    the next day we are posted that document then it is @42-
    the system takes the exchange rate from the header which was specified in the parked document @40- only.
    If we not set this indicator it will take at the time of posting of document @42-
    Hope it will help.
    Best Regards, Lawrence

  • Update the Payment Currency and Invoice Currency for all suppliers

    Dears;
    I have a requirement to update the Invoice Currency and Payment Currency for the all defined suppliers in Oracle Apps R12.
    Any help regards this?
    Regards;

    Dear Mohammad;
    Thanks for reply; I checked the suggested document. But nothing mentioned about suppliers setup or modifications.
    I'm looking for something like Oracle Interface to do this requirement.
    Regards;

  • Difference between stock currency and material currency

    Hi all,
    I have noticed there is difference in Stock currency and Material currency in MB5L(List of stock overview).  Both stock vaue should tally every month.  But it is showing difference for the last month.
    Could anybody help me how to find out this difference,  I have checked the MR21 already, But there is no price difference.
    Any suggestions????????
    Tx,
    Veena

    Hello,
    Transfer posting may involve or not involve the physical goods transfer.  In the system you might do transfer posting from quality to unrestricted, or from one store location to another.
    In transfer posting you remove and or replace materials from storage in one storage location and place them in another storage location.
    That transction code you use for transfer posting MB1B with following movement types may be used
    301, 303,305,311,411,309.
    301 is Stock Transfer Between Plants in One Step
    303 & 305 : Stock Transfer Between Plants in Two Steps
    In stock transfer, it always involves physical movement of goods, like transfer between plants under same company code or different company codes.
    Following types are possible with STO's
    Stock Transport Order Without Delivery
    Stock Transport Order with Delivery via Shipping
    Stock Transport Order with Delivery and Billing Document/Invoice
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
    Please go through attach SAP document
    BR,
    Tushar

  • Difference in between account currency and functional currency

    Hi Sap Experts,
    What is the difference in between account currency and functional currency.
    In which table account currency and functional currency will be stored.
    Regards,
    Rajprabhakar
    Moderator: Please, avoid asking basic questions

    A Payer is the individual or company who settles the invoices foa a service or for delivered goods.
    Whereas the account group determines:
    Which screens and fields are necessary for entering master data
    Whether you can or must make an entry in these fields
    How master record numbers are assigned (externally by you or internally by the system) and the number range from which they are assigned
    Which partner functions are valid
    Whether the business partner is a one-time customer or one-time vendor.
    Reward if useful.
    Amruta

  • Testing conversion between reference and local currency...

    Hi,
    I am working on exchange rate configuration. If we define exchange Ref currency in the table for defining exchange rate type, SAP says that if we are using multiple currencies then we need not feed translation rates between each and every
    currency but just between reference currency and foreign currencies.
    I am using 3 foreign currencies (X1,X2,X3) and one local or reference (BMD) currency.
    I have defined the translation rates between (X1 -> BMD, X2 -> BMD, X3 -> BMD). Now I want to test if translation between X1 and X2 takes place
    correctly or not. How can I test this ? How can I prototype this in afunction module ?
    Regards,
    Rajesh.

    Hi,
    Use the FM:
    <b>READ_EXCHANGE_RATE</b> Retrieve exchange rate on a particular date
    Hope this helps.
    Reward if helpful.
    Regards,
    Sipra

  • Foreign and Local currency balance difference in GL

    Dear All,
    I have a GL for Bank in which entries are posted manually through F-02. GL is maintained on company code currency (Say INR). The transactions posted are in foreign currency  (ex USD).
    when we check the balance of the account in FBL3N it is showing FC balance as zero and Local currency balance as 100 INR.
    The above situation is due to the following
    Received Amount 100 USD @ 40 = 4000 INR (manually posted JV)
    Credited amount 100 USD @ 39 = 3900 INR (Manually posted through JV).
    As both the activity is done through JV the system dint prompt for exchange rate difference account. So no my question is:
    1. In this scenario, is there any why the system can automatically post entry to exchange rate difference Or posting Manual JV is the only way out.
    2. What is the use of Tcode F.05. What it actually does.
    Thanks for your valuable time.
    Please let me know if you need any additional details
    Regards
    Naveen

    Hi
    Since you do not have any parallel currency, The balance of 100 INR in Local Currency is correct.  There is no need to write it off.
    My understanding is that the transactions are as below.
    Transaction    Doc Curr   Doc Curr Amt      Loc Curr     Loc Curr Amt
    1                     USD            100.00                 INR                4000.00
    2                     USD           -100.00                 INR              -3900.00
    Balance                                0.00                                          100.00  
    You have a Bank Account which is maintained in INR. 
    In first transaction, you have a receipt of 100$ and bank has applied a rate of 1USD = 40 INR.  So the balance is 4000 INR. 
    Then you have made a payment of 100$  and bank has applied a rate of 1USD = 39 INR.  So you still have 100 INR. 
    That is not a gain or loos.  It is valid balance.
    Thanks
    Prasad
    Edited by: Prasad Neelisetty on Dec 23, 2009 8:35 PM
    Edited by: Prasad Neelisetty on Dec 23, 2009 8:36 PM

Maybe you are looking for