F4 button on ALV post upgrade SAP_BASIS 7 package SAPKB70030

Hi all,
we have a problem with the F4 button on ALV ( on WD Abap ).
After upgrade package, we don't display the F4 button, but if push F4 it's works fine.
Please Provided me required information.
Waiting for Replay.
Thanks & Regard
Dan

Even with upgrade I was still having problem, so what I did was...
I created new new interactive form.
I deleted old interactive form from the layout and recreated one.
When I went to adobe design form, I just imported old form (it automatically retained all settings)
and saved it and activiated it... and It worked.
It wasn't the best solution, but since I only had one interactive form, it didn't take that long to do it (probably total of 10 minutes.)

Similar Messages

EJB references post upgrade from 8.1 to 10.3

Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
          <ejb>content.jar</ejb>
     </module>
     <module>
          <ejb>content_repo.jar</ejb>
     </module>
     <module>
          <ejb>netuix.jar</ejb>
     </module>
     <module>
          <ejb>p13n_ejb.jar</ejb>
     </module>
     <module>
          <ejb>prefs.jar</ejb>
     </module>
     <module>
          <ejb>wps.jar</ejb>
     </module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.

Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal

Push Button On ALV

I have done coding for G/L interface . This report displays an ALV at the end after performnig validations on each record uploaded from a flat file. Once all records are checked , the ALV requires a PUSH BUTTON that when triggered will post the records.
My query is, how shud i add a push button in the ALV in the title bar.

Hi,
You have to copy the standard pf status to a new one.
For this go to the ALV screen and take the menu System -> Status. (I do not access to the system now) then look for the standard pf status. Copy this to Z range and then add your new button.
Even you can do in this method
Create a GUI status.
Go to GUI Status->Application toolbar.
THen add the button by giving
Function text
Icon name
Icon text
Info. text
Fastpath
Then in PBO of the screen,
Just give in a module
set pf_status 'ZSTATUS'.
Here is an example for your question
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
i_structure_name = 'QMEL'
TABLES
t_outtab = i_qmel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'TEST'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
WHEN 'BUTTON'. "Double Click line Item
call transaction 'MM01'.
endcase.
endform.
To Click on the you have to do in the following way
i_callback_user_command = 'USER_COMMAND'
form user_command using i_ucomm like sy-ucomm
is_selfield type slis_selfield.
case i_ucomm.
when 'XXXX'. "XXXX is the function code for new button
endcase.
endform.
For More info please refer the below links
Please refer the following
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D38170%26messageID%3D368851
http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
Regards,
Chandru

PUSH BUTTON IN ALV

Hi all,
To add a push button in alv, I have copie the pf-status 'Standard' to my program, named 'Zstandard' ,and added button to the status.
and added parameters in ALV function like:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = repname
      i_callback_pf_status_set = 'SET_PF_STATUS'
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
DATA: wa_extab TYPE slis_extab.
wa_extab-fcode = '&OAD'.
APPEND wa_extab TO rt_extab.
wa_extab-fcode = '&AVE'.
APPEND wa_extab TO rt_extab.
SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab .
ENDFORM. "Set_pf_status
But still I am not able to display the pf-status.
can anybody tell me step bu step procedure to add push button in ALV.
thanks,
sudheer

>
sudheer kumar wrote:
> Hi all,
>
> To add a push button in alv, I have copie the pf-status 'Standard' to my program, named 'Zstandard' ,and added button to the status.
>
> and added parameters in ALV function like:
>   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
>     EXPORTING
>       i_callback_program       = repname
>       i_callback_pf_status_set = 'SET_PF_STATUS'
>
> FORM set_pf_status USING rt_extab TYPE slis_t_extab.
>   DATA: wa_extab TYPE slis_extab.
>   wa_extab-fcode = '&OAD'.
>   APPEND wa_extab TO rt_extab.
>   wa_extab-fcode = '&AVE'.
>   APPEND wa_extab TO rt_extab.
>   SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab .
> ENDFORM. "Set_pf_status
>
> But still I am not able to display the pf-status.
>
> can anybody tell me step bu step procedure to add push button in ALV.
>
> thanks,
> sudheer
hi sudheer can u post the complete code may be u have not passed the form name to the events table or events table to the function module check it

Information button in ALV report

Information button in ALV report is not working. any suggestion

I have copied standard tool bar from standard program.During debugging, I have found that function code is defferent. Then I changed function code according to that.

ASU-process POST Upgrade Step on SQL database

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

Upgrade step ASU-process post upgrade step

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory
Error handling of task group execution                                Optional
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Convert customizing for warehouse funds ctr scenarios     Optional
Various problems classification commitment items (class type     Obligatory
Unauthorized error messages udring fiscal year change/reassi     Obligatory
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory
Non-7bit-ASCII character used for BCS key figures             Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory
Customer specific BSEG-fields not transferred                  Optional
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional
Converting Short Texts                                                         Obligatory
Migrating Data                                                                         Optional     4.7
Activating SAP ECC Extensions                                          Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PM

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

Control User Specific button in ALV report

Hi,
Can anybody please suggest me how to control "USER SPECIFIC" button in ALV report layout using authorization object. I mean if you can tell me which authorization object is responsible to control the "USER SPECIFIC" button.

additional info to what Lakshmi already said:-
normally the restrictions for saving layouts/display variants are done at 2 levels:
1) The developer of an ALV list first predetermines the authorization in the 'i_save' parameter within the code.
I_SAVE = ' '     -
layouts cannot be saved
I_SAVE = 'A'   -
user-specific and cross-user layouts can be saved
I_SAVE = 'X'   --- cross-user layouts can be saved
I_SAVE = 'U' --- user-specific layouts can be saved
2) The second level comes to us restriciting the S_ALV_LAYO which gives access to users to save global layouts if I_SAVE for that particular transaction is A or X.
for example, a report has I_SAVE= 'A', which means
it will allow to save User-specific layouts without any restrictions.
and if user has S_ALV_LAYO then he can save both User-Specific and Global Layouts(variants).
it would be better to keep this object separate.

Hide Change Layout Button in ALV report o/p for MB52 Tcode

Hi,
Is it possible to Hide Change Layout Button in ALV output for Report MB52 using authoriztaion.
We have created a layout in which we are hiding some coloumns which the user should not see.
But if the change layout button is active then the user can add those coloumns to output.
Is this possible through authorizations. I want to avoid doing any chnages to the std sap program.
Thanks & Regards,
Fawaz

Check the object S_ALV_LAYO

Button in ALV Report

Hi All,
I want to know how to create a button in alv report .
Please respond to my query.
Thanks and Regards,
Aman

hi aman,
u can try this example:
where i have a created a button:
*& Report Z_GURU_ALV_EVENT01                                          *
report z_guru_alv_event01                      .
tables: mara, makt.
type-pools slis.
data: begin of imara occurs 0,
        matnr like mara-matnr,
        ernam like mara-ernam,
        ersda like mara-ersda,
      end of imara.
data: begin of imakt occurs 0,
        matnr like mara-matnr,
        spras like makt-spras,
        maktx like makt-maktx,
      end of imakt.
data: ffc type slis_t_fieldcat_alv,
      ievents type slis_t_event with header line,
      iievent type slis_t_event with header line.
select-options: s_matnr for mara-matnr.
initialization.
call function 'REUSE_ALV_EVENTS_GET'
exporting
   i_list_type           = 0
importing
   et_events             = ievents[]
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table ievents with key name = slis_ev_top_of_page.
ievents-form = 'TOPP'.
modify ievents transporting form where name = slis_ev_top_of_page.
clear ievents.
read table ievents with key name = slis_ev_user_command.
ievents-form = 'USR_COM'.
modify ievents transporting form where name = slis_ev_user_command.
clear ievents.
read table ievents with key name = slis_ev_pf_status_set.
ievents-form = 'PFSTAT'.
modify ievents transporting form where name = slis_ev_pf_status_set.
clear ievents.
call function 'REUSE_ALV_EVENTS_GET'
exporting
   i_list_type           = 0
importing
   et_events             = iievent[]
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table iievent with key name = slis_ev_pf_status_set.
iievent-form = 'PFSTAT'.
modify iievent transporting form where name = slis_ev_pf_status_set.
clear iievent.
read table iievent with key name = slis_ev_user_command.
iievent-form = 'USERCOM'.
modify iievent transporting form where name = slis_ev_user_command.
clear iievent.
start-of-selection.
select matnr ernam ersda from mara into table imara where matnr
in s_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMARA'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
   i_callback_top_of_page            = 'ALV_BACKGROUND'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   i_callback_html_end_of_list       = 'ALV_BACKGROUND'
I_STRUCTURE_NAME                  =
   i_background_id                   = 'ALV_BACKGROUND'
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ffc
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = ievents[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imara
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
form topp.
data: it_top type slis_t_listheader,"having s , h ,a
       wa type slis_listheader.
      IT_SPEC TYPE SLIS_T_SPECIALCOL_ALV,
      WA1 TYPE SLIS_SPECIALCOL_ALV.
wa-typ = 'H'.
wa-info = 'RELIANCE GLOBAL SERVICES' .
append wa to it_top.
clear wa.
wa-typ = 'S'.wa-key = 'NO:23'.
wa-info = 'TRIPLICANE HIGH ROAD'.
append wa to it_top.
clear wa.
wa-typ = 'S'.
wa-info = 'TRIPLICANE'.
append wa to it_top.
clear wa.
wa-typ = 'A'.
wa-info = 'sample'.
append wa to it_top.
clear wa.
call function 'REUSE_ALV_COMMENTARY_WRITE'
   exporting
     it_list_commentary       = it_top
    i_logo                   = 'ENJOYSAP_LOGO'
   I_END_OF_LIST_GRID       =
   I_ALV_FORM               =
endform.
form usr_com using r_ucomm type sy-ucomm r_selfield type slis_selfield.
case r_ucomm.
when 'CANC'.
leave to screen 0.
endcase.
data: ff type slis_t_fieldcat_alv.
data: v_vbeln(18) type n.
v_vbeln = r_selfield-value.
select matnr spras maktx
from makt into table imakt
up to 10 rows
where matnr = v_vbeln.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMAKT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ff
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ff
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = iievent[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imakt
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. "USR_COM
form pfstat using extab type slis_t_extab.
set pf-status 'STD' excluding extab.
endform. " pfstat
form usercom using rucom type sy-ucomm rselfield type slis_selfield.
case rucom.
when 'CANC'.
leave to screen 0.
endcase.
data: ffc type slis_t_fieldcat_alv,
      v_matnr(18) type n.
v_matnr = rselfield-value.
select matnr ernam ersda from mara into table imara
where matnr = v_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
   i_program_name               = sy-repid
   i_internal_tabname           = 'IMARA'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
   i_inclname                   = sy-repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
changing
    ct_fieldcat                  = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = ffc
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   it_events                         = iievent[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
tables
    t_outtab                          = imara
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.

Push button in alv report

Dear Experts,
         How to add pushbutton in alv report.....
*& Report ZTT_TEST_ALV
REPORT ZTT_TEST_ALV.
*data declarations
type-pools : SLIS.
* data : BEGIN OF wa_kna1,
*                kunnr type kunnr,
*                name1 type name1,
*         end of wa_kna1,
* it_kna1 like tABLE OF wa_kna1.
data : begin of wa_mara,
matnr type matnr,
end of wa_mara,
it_mara like table of wa_mara.
data : it_fcat type slis_t_fieldcat_alv,
         wa_fcat like line of it_fcat.
*selection screen
SELECTION-SCREEN begin of block k with frame title text-001.
* select-OPTIONS : s_kunnr for wa_kna1-kunnr.
     select-OPTIONS : s_matnr for wa_mara-matnr.
SELECTION-SCREEN end of block k.
*select auery
*SELECT kunnr name1 INTO table it_kna1 from kna1 where kunnr in s_kunnr.
select matnr into table it_mara from mara where matnr in s_matnr.
*for displaying fieldcatalog
PERFORM fcat using '1' 'MATNR' 'material Number' 'C410' '20'.
* PERFORM fcat using '2' 'NAME1' 'Customer Name' 'C410' '36'.
*for displaying output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
*   I_CALLBACK_PROGRAM                = ' '
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
*   I_CALLBACK_USER_COMMAND           = ' '
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = 'Report for Customer Details'
*   I_GRID_SETTINGS                   =
*   IS_LAYOUT                         =
   IT_FIELDCAT                       = it_fcat[]
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          = it_mara.
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
* EXPORTING
****   I_INTERFACE_CHECK              = ' '
****   I_CALLBACK_PROGRAM             =
****   I_CALLBACK_PF_STATUS_SET       = ' '
****   I_CALLBACK_USER_COMMAND        = ' '
****   IS_LAYOUT                      =
*   IT_FIELDCAT                    = it_fcat
****   IT_EXCLUDING                   =
****   IT_SPECIAL_GROUPS              =
****   IT_SORT                        =
****   IT_FILTER                      =
****   IS_SEL_HIDE                    =
****   I_SCREEN_START_COLUMN          = 0
****   I_SCREEN_START_LINE            = 0
****   I_SCREEN_END_COLUMN            = 0
****   I_SCREEN_END_LINE              = 0
****   I_DEFAULT                      = 'X'
****   I_SAVE                         = ' '
****   IS_VARIANT                     =
****   IT_EVENTS                      =
****   IT_EVENT_EXIT                  =
***    i_tabname_header               =
***    i_tabname_item                 =
****   I_STRUCTURE_NAME_HEADER        =
****   I_STRUCTURE_NAME_ITEM          =
***    is_keyinfo                     =
****   IS_PRINT                       =
****   IS_REPREP_ID                   =
****   I_BYPASSING_BUFFER             =
****   I_BUFFER_ACTIVE                =
****   IR_SALV_HIERSEQ_ADAPTER        =
****   IT_EXCEPT_QINFO                =
****   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
**** IMPORTING
****   E_EXIT_CAUSED_BY_CALLER        =
****   ES_EXIT_CAUSED_BY_USER         =
* tables
**    t_outtab_header                = it_
*    t_outtab_item                  = it_kna1.
**** EXCEPTIONS
****   PROGRAM_ERROR                  = 1
****   OTHERS                         = 2
***IF sy-subrc <> 0.
**** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
****         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
***ENDIF.
*&      Form FCAT
*       text
*      -->P_0052   text
*      -->P_0053   text
*      -->P_0054   text
form FCAT using    fp_col_pos
                    fp_fieldname
                    fp_seltext_m
                    fp_emphasize
                    fp_outputlen..
wa_fcat-col_pos = fp_col_pos.
wa_fcat-fieldname = fp_fieldname.
wa_fcat-seltext_m = fp_seltext_m.
wa_fcat-emphasize = fp_emphasize.
wa_fcat-outputlen = fp_outputlen.
append wa_fcat to it_fcat.
clear : wa_fcat.
endform.                    " FCAT
FORM SET_PF_STATUS                                         .
SET PF-STATUS 'ZNEWSTATUS' .
"Copy of 'STANDARD' pf_status from fgroup SALV
endform.
i need one push button in alv output display.
Thanks and Regards,
Thirukumaran. R

HI THIRU TRY FOLLOWING CODES:
*& Report ZSAMPLE
REPORT ZSAMPLE.
TABLES:MARA.
TYPE-POOLS: SLIS.
TYPES:BEGIN OF TY_ITAB,
      MATNR LIKE MARA-MATNR,
      ERSDA LIKE MARA-ERSDA,
      END OF TY_ITAB.
DATA:ITAB TYPE STANDARD TABLE OF TY_ITAB WITH HEADER LINE.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV,
          WA_FCAT TYPE SLIS_FIELDCAT_ALV,
          LAYOUT TYPE SLIS_LAYOUT_ALV,
          WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:P_MATNR TYPE MARA-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM FIELDCAT.
LAYOUT-ZEBRA = 'X'.
PERFORM OUTPUT.
*&      Form PF_STATUS
      text
     -->RT_EXTAB   text
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'BUTT'.
ENDFORM.                    "PF_STATUS
*&      Form PUSH_BUTT1
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM GET USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'GET'.
      IF SY-SUBRC EQ 0.
        CALL TRANSACTION 'SE11'.
      ELSE.
      ENDIF.
    WHEN 'EXIT' OR 'CANCEL' .
      LEAVE PROGRAM.
ENDCASE.
ENDFORM.                                                    "PUSH_BUTT1
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FCAT-SELTEXT_L = 'Select'.
WA_FCAT-COL_POS = '1'.
WA_FCAT-FIELDNAME = 'CHECK'.
WA_FCAT-CHECKBOX = 'X'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '4'.
WA_FCAT-INPUT(1) = 'X'.
WA_FCAT-EDIT_MASK(1) = 'X'.
WA_FCAT-EDIT(1) = 'X'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Material Number'.
WA_FCAT-COL_POS = '2'.
WA_FCAT-FIELDNAME = 'MATNR'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '18'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
WA_FCAT-SELTEXT_L = 'Date'.
WA_FCAT-COL_POS = '3'.
WA_FCAT-FIELDNAME = 'ERSDA'.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-OUTPUTLEN = '8'.
APPEND WA_FCAT TO FCAT.
CLEAR WA_FCAT.
ENDFORM.                    " FIELDCAT
*&      Form OUTPUT
      text
--> p1        text
<-- p2        text
FORM OUTPUT .
SELECT MATNR ERSDA FROM MARA
    INTO TABLE ITAB
    WHERE MATNR EQ P_MATNR.
IF SY-SUBRC EQ 0.
    PERFORM GRID.
ELSE.
    MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
ENDFORM.                    " OUTPUT
*&      Form GRID
      text
--> p1        text
<-- p2        text
FORM GRID .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_CALLBACK_PROGRAM              = SY-REPID
   I_CALLBACK_PF_STATUS_SET        = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND         = 'GET'
   IS_LAYOUT                         = LAYOUT
     IT_FIELDCAT                     = FCAT
   I_DEFAULT                         = 'X'
    TABLES
      T_OUTTAB                          = ITAB.
ENDFORM.                    " GRID
REGARDS,
SAKTHIVEL.VT

Add on custom button to ALV toolbar in std tcode ME51N, ME52N and ME53N.

Hi All,
I have the requirement to add on the custom button to ALV toolbar in ITEM OVERVIEW for standard transaction ME51N, ME52N and ME53N. Does anyone know what enhancement point or user exit i should apply and how i can add on the custom button?
Thanks.

There are no user exits or badi's for COOIS. You may have to make copy of the PPIO_ENTRY to ZPPIO_ENTRY including all the varians without changing their names like copy SAP&COOIS to SAP&COOIS. Create a T-Code ZCOOIS and replace COOIS in variant SAP&COOIS to ZCOOIS not in the name of the variant but in the field "Check Authorization for".
The PF-Status is found in the include LCOISOUTPUTF16 which is located in the function group COISOUTPUT you may have to copy that too. Finally you need to copy SAPLCOISOUTPUT with its GUI status GENERAL and add your custom button there.

How to give push button in alv report output

hi,
my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
regards,
siva kumar

have a look at this thread, also has a sample report at the end from Uwe Schieferstein.
[button on alv list|How to add and program a pushbutton on ALV grid line;
seems not to work try this:
How to add and program a pushbutton on ALV grid line
Edited by: Micky Oestreich on May 15, 2008 10:20 PM

Add buttons in ALV Report output

Dear Friends,
I am developing one ALV report in PP moule for calculating Shelf Life. The output is coming properly in ALV.
But my additional requirement is ADD coustomise buttons in ALV Reports.
Please give me an idea how can I insert buttons in my alv report?
Thanks & Regards
Vasu

Hi vasu,
consider the code given below.
      FORM F4200_PF_STATUS_SET                                      *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
The PF status is an exact copy of the PF status 'STANDARD' of program
SAPLSALV but with command 'CHNG' added to it.
SET PF-STATUS 'ZSOM_STANDARD' EXCLUDING i_extab.
ENDFORM.
*&      Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'.            " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'.            " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'.            " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'.            " Information.
APPEND ws_fcode TO i_extab.
ENDFORM.                    " f4210_exclude_fcodes
*&      Form f4300_user_command
FORM f4300_user_command USING ucomm LIKE sy-ucomm
                                         selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.                              "Double Click line Item
      READ TABLE i_data INDEX selfield-tabindex.
      IF i_data-qmnum NE space.
        SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
        CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
        CLEAR ucomm.
      ENDIF.
    WHEN 'CHNG'.                          " Change Notification Icon
      READ TABLE i_data INDEX selfield-tabindex.
      IF i_data-qmnum NE space.
        SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
        CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
      CLEAR ucomm.
      ENDIF.
ENDCASE.
CLEAR ucomm.
ENDFORM.                    " f4300_user_command
EXPLANATION
In this program, first we created a PF status (ZSOM_STANDARD), which was an exact copy of STANDARD of program SAPLSALV through transaction SE41 (Menu Painter). Then we added another button to it,with a new fcode called CHNG. After this this we set this PF status instead of STANADRD.
We initialize a third event USER_COMMAND and associate a form with it. In this form we can capture the function codes and write any functionality under it. If we write functionality for an existing fcode, then this gets precedence over the default functionality that might be associated with it.
In this example, we capture a standard fcode &IC1 that is nothing but double clicking a line of the report. We are capturing the notification number of that line and calling transaction IW52 with it. We are also doing the same when a user clicks on the new Change Notification button.
When the user clicks the Back button in IW52, it comes back to the report.
Please reward for the same.
Message was edited by: Prakhar Saxena

F4 button on ALV post upgrade SAP_BASIS 7 package SAPKB70030

Similar Messages

Maybe you are looking for