F4 selection screen layout - WAD 7
Hi guys,
We have a simple selection screen over a variable and we have a couple of questions regarding the layout of the selection screen.
1. Can we change the default to "Search" instead of "All"?
2. When we scroll down in the list the width of the columns changes according to the data, is there a way to determine the column width?
Regards
Shlomi
Hello Shlomi Weiss,
Unfortunatelly this is not possible to change. This is working by design.
Thanks for the compreention.
Diego Ferrary
Similar Messages
-
How to design selection screen with WAD 3.x Web Items
Hi Guruu2019s,
I have a requirement where I need to design a selection screen by using WAD 3.x web items. In the selection screen we have to include the Query Description - in the left corner of the selection screen, Name of Sales Person u2013 left side of the screen, Date from and Date to u2013 right side of the selection screen, User ID and User Name u2013 on the top right of the selection screen etc., after this on the bottom of the selection screen I have to include the pushbutton RUN REPORT.
After filling all the above parameters and click on Run Report it has to trigger another URL link which contains consolidated Sales CRM Report.
Could any one suggest me and provide me the idea on developing the selection screen with WAD 3.x Web items and is there any other interface to trigger the other URL link when I click on Run Report.
Regards
Venkatno replies. Closing the incident
-
How to get Selection Screen in WAD?
Hi Experts,
I have designed a WAD where when executed, the selection screen does not come. It goes straight to the report.
I have used a table for the Data Providers.
What settings I have to make for the selection screen to pop out?
Kindly guide me.
With kind regards,
Shreeem.Hi,
Have a look at below thread,
Display of the selection screen in WAD
Hope this helps.
Regards,
Mani -
How to force selection screen in WAD Report
Hi Gurus,
How do we force a variable selection screen in WAD Report. We are in SP 10.
Thanks
SyedHi Karthik,
Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
Should I reinstall my front end. We are in SP10.
Appreciate your response. -
Change order variable in selection screen of WAD
Hi,
I created a wad with 2 queries.
Selection screen of Query A :
Year
Month
Site
Customer
Activity
Selection screen of Query B :
Year
Site
Customer
I checked the [MELT_VARIABLES] in the WAD because Year, Site and Customer are in both queries
Unfortunately, the result in my wad is :
Year
Site
Customer
Month
Activity
But i would like to have :
Year
Month
Site
Customer
Activity
How could i do it ?
Thanks in advance@Rakesh,
I'm using WAD 7.0
@Edward,
Yes, i know it's possible to change the ordre in Query Designer.
It's why i set the sequence in Query A and Query B as i showed in my initial post.
Unfortunately, it seems than in WAD the sequence is changed.
First, it show the variable that exist in both queries ( in my case : Year, Site and Customer )
then the variable that exist only in query A ( Month, Activity )
then the variable that exist only in query B ( Nothing )
I wish to change this behavior.
Thanks,
David -
i have a requirement where i have to customize the layout dynamically in the report output.the layout should be changed as per the selection screen field entry.is this possible?
Hi,
Check this one, How it is changing dynamically
TABLES : mara,marc.
************************Selection screen fields******************************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_meth1 RADIOBUTTON GROUP g1 USER-COMMAND g1,
p_meth2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK matnr
WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_matnr FOR marc-matnr MODIF ID m1.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_werks FOR marc-werks MODIF ID m1 .
SELECTION-SCREEN END OF BLOCK matnr.
SELECTION-SCREEN BEGIN OF BLOCK file WITH FRAME TITLE text-003.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_fpath TYPE ibipparms-path MODIF ID m2 LOWER CASE.
SELECTION-SCREEN END OF BLOCK file.
SELECTION-SCREEN BEGIN OF BLOCK date WITH FRAME TITLE text-004.
SELECTION-SCREEN SKIP 1.
PARAMETERS : p_date TYPE datuv. "CCT51576.
SELECTION-SCREEN END OF BLOCK date.
***********************Screen Validation*********************************************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CASE screen-group1.
WHEN 'M1'.
IF p_meth1 <> 'X'.
screen-active = 1.
ENDIF.
IF p_meth2 = 'X'.
screen-active = 0.
ENDIF.
WHEN 'M2'.
IF p_meth2 = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
IF p_meth1 = 'X'.
screen-active = 0.
ENDIF.
ENDCASE.
MODIFY SCREEN.
ENDLOOP. -
Selection Screen Layout.
Hi,
I need to layout a selection screen like the one below:
RadioButton1
Parameter1
Select-Option1
RadioButton2
RadioButton3
Items (Parameter1 and Select-Option1) should be disabled when RadioButton1 is not selected.
I cant quite figure out how i would insert (Parameter1 and Select-Option1) between RadioButton1 and 2. I dont want to waste precious time to do research for this, so I opted to ask the experts(you..).
Thanks,
FrankHi
*& Report ZNNR_SAMPLE22
REPORT ZNNR_SAMPLE22 NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
MATNR LIKE MARA-MATNR,
WERKS LIKE MARC-WERKS,
PSTAT LIKE MARC-PSTAT,
EKGRP LIKE MARC-EKGRP,
END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
EBELN LIKE EKKO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
WERKS LIKE EKPO-WERKS,
LGORT LIKE EKPO-LGORT,
END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
******END OF SELECTION SCREEN DESIGN****************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF R3 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
execute this one -
Change default value (200) of Max No of Hits for selection screen in WAD
How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely RewardedDear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind -
Query regarding selection screen layout
i want to knw how to put a blank line / how to skip a line in selection screen...
like
in Block 1
Presentn filepath
Application filepath
(1 line skipped)
Log filepath
end of block 1Hi ,
use <b>SELECTION-SCREEN SKIP 2</b>. statement.If u want to skip two lines .
check this code.
selection-screen begin of block B1 with frame title text-d01.
selection-screen SKIP 3.
parameters : p_lifnr type lifnr.
parameters : p_kunnr type kunnr.
parameters : p_count(2) type n.
selection-screen SKIP 3.
selection-screen end of block B1.
regards
reena -
Hi,
I have 5 data providers( queries) in the web query. They have same selection criteria in which one of the variables is mandatory. when I execute the web query the same selection criteria( variables) are getting displayed 5 times.
How can I do this. Point will be awarded to the valid answer.
regards,
Bill
Edited by: Bill Bryan on May 20, 2008 3:32 PMDear Bill,
You can use the Filter Webitem and in the Behaviour LINKED_DATA_PROVIDER_REF_LIST , for this parameter specify all the data providers , this will allow only one time Input and will apply to all queries.
Hope this helps!!!
Cheers!!
Sri -
Display selection screen values in WAD
Hi all,
I would like to display the values of the selection screen in my report. I can't find which WAD object I can used to do that.
It will be a reminder for the user of what he have filled in the selection screen.
(WAD version 2004s support package 11)
Regards,
Anthony.
Message was edited by:
COADIC AnthonyAnthony,
Inn 3.5 we use a web item called Text Elements and define in it whether we will display Filters - Variables or General elements.
There must be an equivalent in 2004.
Regards
Gill -
SAP Query selection screen issues after ECC upgrade
Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh SHi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran -
Edit variable selection screen
Hi,
I want to edit the variable selection screen in WAD 7.0 (change width of colums).
Can anyone give me the template-name?
MichelAs quoted from http://sapfans.com/forums/viewtopic.php?f=16&t=221261
saw this thread on SDN: SAP Business Explorer (SAP BEx)
Question:
Hi,
Most of our BW reports use one Web Template. When the variable screen pops up, the header shows "Variables for Ad Hoc Report" instead of the name of the report that were are executing from the role folder.
Does anybody know how can I get the title of the report to show instead of "Variables for Ad Hoc Report"?
Thanks for your help!
Helena
Answer from SAP Employee Heike Guder:
Hi Helena,
sorry, but this is only possible with modification in class cl_rsr_www_variable_screen method FILL_OPEN_FORM(no customizing for this)
Heike
If you are really into it you might want to start diggin in that class and if do - please let us know the result of it.
Cheers,
Skibum -
Unable to save the ALV layout variant and display of selection screen on F4
Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = ws_extract1-report
i_callback_user_command = ws_user_command
is_layout = ws_layout
it_fieldcat = wt_fieldcat
it_sort = wt_sort
i_save = 'A'
is_variant = ws_variant2
it_events = wt_events[]
TABLES
t_outtab = wt_edition.
* Call ALV editor in grid mode
ELSE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = ws_extract1-report
i_callback_user_command = ws_user_command
it_fieldcat = wt_fieldcat
it_sort = wt_sort
i_save = 'A'
is_variant = ws_variant2
it_events = wt_events[]
TABLES
t_outtab = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh -
How to dispay report with layout option in selection screen?
Hi all,
I have designed a report which also has a list box in the selection screen for the type of saved layout that users have saved. I want the report to be displayed in the layout that the user has entered.
Eg: if user chooses \RP from the listbox in the selection screen; then the layout format for \RP should be displayed as output of the report.Can anyone tell me how to do this?Thanks in Advance.Hi ,
parameters:p_vari type disvariant.
data: v_save type c.
v_save = 'A'.
data:i_variant type disvariant.
write the code in the At selection screen on value request p_vari.use the FM reuse_alv_variant_f4.
then in the at selection screen check weather the selected variant is existed by using the FM reuse_alv_variant_existance
and in the main GRID FM pass the variant internal table.
or check BALV* in the Se38 for examples
Regards,
Bharani,
Maybe you are looking for
-
Manipulating C++ Objects in Java Through JNI
Hi, I have some existing C++ classes objects that I would like to access through Java methods. However, if I use a java method to create an instance of a C++ object, and then I want to edit the state of that C++ object through java, how do I referenc
-
Add row to tabular form pagination problem when sorted
Hi, I have a problem with a tabular form that has various sortable columns. If the user tries to add a row when the sort order is set to something where possibly the nulls are appearing first in the list, then the user cannot enter any data (since th
-
Calling a sub screen in MODULE user_command_9000 INPUT
HI, PROCESS BEFORE OUTPUT. MODULE STATUS_9000. CALL SUBSCREEN subscreen_9220 INCLUDING sy-repid '9220'. CALL SUBSCREEN subscreen_9240 INCLUDING sy-repid '9240'. PROCESS AFTER INPUT. CALL SUBSCREEN subscreen_9220. MODULE USER_COMMAND_9000. Inside MODU
-
N80 Bluetooth GPS Problems ???
Navicore have a Symbian series 3 version of their navigation software available unfotunately they do NOT support the N80, their official reply to me : 'It has been unfortunately identified that there are some problems in the Bluetooth connection betw
-
Moving files from one partition to another
I originally posted this in the Mountain Lion section, but maybe this is where I should have tried first. I have a song in the iTunes library of the Snow Leopard side of my Hard Drive. It plays well. However, I want to move it to the Mountain Lion s