F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

Hi,
I am a little confused. Today I installed windows 7 64-bit on my acer 9423wsmi notebook. I installed my hp f4280 via a usb cable. It prints and scans. Now I try to install my wireless kit (came with the printer) which worked fine an vista 32-bit sp1. I looked up every driver etc. on hp.com and found the install guide for windows 7. Everything went as described and printing works even without the pc adapter. You might say what is the problem. Well I noticed the wireless (copy) isn't listed under "devices and printers". I found this a bit strange. I tried to install a printer via the windows wizard. But using the network option gives me the shared copy. And using a the usb02 virtual port to which the printer is connect yields the same result: a fully working printer but nowhere to be found in "devices and printers". I searched the internet for a solution but my search results get cluttered with support for the installation.
My questions:
Is this normal on this system with these settings?
Is there a way to let the printer appear in "devices and printers"?
Kind Regards
Carnelain

Hi Flash,
I still haven't fixed the problem. I assume you found this installation guide. If I follow this I still can't see the printer in "device and printers". But when I open a document (notepad, word) I can see the printer listed in the printer dialog. So I am able to print. Printer properties are a bit hard to reach but it works. I am still hoping some wizz kid from hp to come up with a solution . Keep me posted if you know something more.
Carnelain

Similar Messages

My iphone 5 is not showing in my devices and wont sync with my mac

I have a new iphone 5 it is up and working but when plugged into my mac doesn't show up in devices and will not sync

The iPhone 5 with iOS 6.x requires iTunes 10.7 or higher. iTunes 11.0.1 is the current version of iTunes. If you have an earlier version of iTunes you'll need to update iTunes before you can sync.
The latest versions of iTunes requires OSX 10.6.8 (Snow Leopard) or later on your Mac. If you are running a version of OSX prior to 10.6.8 you'll need to update the OSX first.

I have installed succesfully a PCI cards seen by windows but it does not appears in the device and interfaces tools of the Measurement and automation manager?

Cannot install new objects in device and interface to use the ni-imaq library and to take image from my camera.

Which PCI card did you install? The PCI-8252 and PXI-8252 will not appear in MAX. Does your card appear in the Windows Device Manager?

My Apple TV does not show up under devices, and more.

Okay, firstly, I am relatively new to Apple ptoducts. I was recently purchased an Apple TV and a 27 inch iMac by my lady. And yes, I realize how amazng she is. She bought me these gifts to ensure that the last two and the next 4 months go by smoothly. I was struck by a car while it was doing 65+ mph, than struck again by the same car, than ran over and jumped off of. Yeah.... So needless to say I have severe brain damage, lost memory, a leg that is now 52% titanium and worse, I can not use my right arm.... for now, it may recover with the next two years. so, I tell you this for a little "guilt" but mostly to excuse the formatting of this email. It was typed entirely on my iMac and entirely using one hand, and not my primary hand at that.
I am not new to iTunes, I had a few purchases before this issue. Between those purchases and my Apple TV "FUN" I have amassed quite a few: Seasons of TV and Movies.
1:   When I log in to my Apple TV, I can see all of the purchases that I made using both the Apple TV and those that I made previously using iTunes on my Windows based PC. All is well. They are organized by type and sorted perfectly. That plus they stream quicky and completely.
2:   When I turn on my iMac and start iTunes, I do not see my TV seasons or Movies under the "Library" section on the left side of my iTunes screen. I see the options, they are simply empty. I see no content listed within them.
3:   I can however select the "Purchased" option under the "Store" section on the left hand side of the screen. Once inside that options area, I can click on "Download Previous Purchases" in the lower right hand corner of the screen. From there I can see all of my purchased TV and Movies, including those that I had previously purchased on my old windows PC and those purchased recently on my Apple TV set. That and I can download them and make them available to my iMac version of iTunes.
5:   I am unable to see my Apple TV listed under the "Devices" section. I also do not see the "Devices" section at all, however I assume that is because it is currently emty.
QUESTIONS:
A:   Can you stream data such as TV seasons or Moies while using iTunes on an iMac. Similar to the way that you stream them from your iTunes purchase histor while viewing them on an Apple TV? Or do I need to download them inorder to view them?
B:   Is Apple TV shown under connected devices while it is connected to the Wi-Fi netwok? I can see my Iphone under devices when I connect it with a cable to my iMac. So I know that my devices section is working. I simply fear that my Appl TV is not showing up brcause of existing issues.
NOTES:
A:   All of my devices are updated with the latest available drivers.
B:   My Apple TV, iMac and iPad all work on the same Wi-Fi network. That and they are all connected to the same iTunes account.
C.   My lady is using a different login for the iMac. Her iTunes is setup but is not usng my iTunes account, it is using her account and has access to her DATA. When I log in to the iMac, my iTunes is working and is different from the iTunes that is operating under her username.
Ok Guys..and Gals please help me out. The thing is, none of this is truly effecting me in a substantial manor. I can see my purchase history, I can download parts of it to my iMac via iTunes, and my Apple TV is smoooooooth. I mainly need clarification on the questions that I asked. Can I stream using the iMac, should I see my Apple TV under devices, and why do I not see my DATA under the library section of iTunes?
THANK YOU for you time. Remember, I am relatively new to Apple as a product. And I fricking LOVE it.
When I was in my accident, my arm, my leg, my skull, my brain, my clothing, my key chain and my wallet, were all destroyed. But my iPhone survived. I have records both police and medical to prove this. The one way I had to have any initial memory of my friends and family was in that phone. I still have that phone, I always will. So Apple if you need an awesome commercial for your iPhone, Vince has got your back!!!

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

Hey there longislandmacca,
It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cannot print wirelessly from Windows 7 (64 bit) laptop to Officejet 6000 Wireless (E609n)

The printer is a HP Officejet 6000 Wireless (E609n) and is connected via usb to a Windows 7 (64 bit) desktop and the laptop has Windows 7 (64 bit) loaded.
No changes were made that I'm aware of other than the usual Windows updates.
Server is offline is displayed next to the printer icon on the laptop when printing is attempted.
The wireless network test report shows no problems.
I have rebooted the desktop and printer with no success.
The laptop used to print wirelessly without a problem.

I am not sure the Officejet 6000 can have both the wireless and USB ports active at the same time. You could try disconnecting for the USB cable and then power cycling the printer and trying to connect wirelessly. If you have the desktop connected to a router that also provices wireless capability you could connect the desktop with the network connection.
One other thing you might consider is sharing the printer on your network from the desktop computer. Next on the laptop computer do the following: go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then select HP (not Hewlett-Packard) for the manufacturer and select the appropriate HP Officejet 6000 series model.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp officejet 4500 prints but does not appear in devices and printers in Windows 7

My wireless hp officejet 4500g prints fine wirelessly but it does not appear in Control Panel Devices and Printers in Windows 7. Do I have to go through all that uninstall and reinstall. I've used Window 7 Troubleshooting Printer check and all was fine.. Thanks for any help

Hi,
If the printer successfully print, it do exists within Devices and Printers..
Windows 7 may merge several devices into a single icon, right clicking a merged icon will let you then choose the specific device as you may see in the following screenshot as a sample:
Check any existing printer icon and locate the one your printer combined with..
If none of the printers does not list the 4500 printer make sure to right click the Computer icon within the Devices category, I notiice the printer sometimes merged within the computer as well, then you will see any printer options (e.g. Printer Properties, Printing Preferences within the computer menu.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When I went to bed I had 3,000 song and multiple playlists. This morning I have ~30 songs and no playlists. What could have happened to my songs playlists? I run iTunes on a Windows 7 64-bit machine. HELP! (oh, and the Songs are not in recycle bin)

When I went to bed I had 3,000 song and multiple playlists. This morning I have ~30 songs and no playlists. What could have happened to my songs playlists? I run iTunes on a Windows 7 64-bit machine. HELP! (oh, and the Songs are not in recycle bin)
My wife's ipod nano was plugged into the machine overnight.
When she went running with it, there were no songs on it. She checked the computer and was horrified to see that the playlists had disappeared and most of the songs had disappeared.
QUESTIONS:
1. What could it be?
2. How can I fix it?

Hi, there alot of us suffering from this phernomonon but there is a forum topic about is already.
https://discussions.apple.com/message/16767377#16767377
Come check it out.
Hope this works out for all of us.

Windows 8 64-bit not working on iTunes

Every time I try to update my iTunes it fully downloads but when I try to install it says that its not compatible with my computer. I have Windows 8 64-bit and I download the 64-bit Windows version. Does anybody know why it doesn't work?

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

if you're trying to convert pdf files to word files, you want acrobat pro or acrobat standard, Buying guide | Adobe Acrobat XI Standard
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Home Sharing Windows 8 64 Bit - Not working

Home Sharing on itune 11.0.2 stopped working. I enabled Home Sharing and I don't see shared Folder on iTunes.
Os : Windows 8 64-bit
ANy thoughts.
TIA

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

I can see my wireless printer in devices, but can't get it to print

I have a new MacBook Air and cannot get it to print to my existing wireless printer. I can see it in Devices and Printers, but it just cycles on "Connecting to Printer" then times out.

Hello there sjbrosjbro,
It sounds like you are not able to print to your printer because it keeps timing out when you try. I would use the troubleshooting steps from the following article to help you get that printer going again. It may be something as simple as re adding the printer if you've already restarted both the printer and the computer already:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling

Windows 7 devices and printers not showing

The ultimate fix was when MS Support advised be to go to services.msc and start Bluetooth services (and set it to automatic) -- I did, rebooted and the Windows 7 Pro Devices and Printers once again showed up!
Not sure why Bluetooh services would cause my Device and Printers window to open blank (and seemingly keep looking for icons to populate the screen), but I am sure the code fix will be in a fuute windows update.
There was no other place to put this so, I figured that this possible solution will help other early adopters of Win7

NOT SOLVED THE PROBLEM IS BACK perhaps worst: I know it is a lot to read but if you have time please read carefully so we can get to the bottom of this problem.
Tried everything suggested from Bluetooth service to Windows in-place upgrade. Please help!
Most interesting is it is showing same or very similar problem on multiple Windows computers in HOME network and HOME Group. Not on all of them. so here is some background (it may show that some other people with the same problem may
have same setup): 8x Windows PC - Vista, W7 and W8.1, plus Macs, iOS, Linux, Android devices and 2 wired network printers - Brother MFC9120CN and HP Officejet 6500. Now PCs with trouble (1 W7 Ultimate, 1 Vista Pro and 2x W8.1 - Vista and W7 had this
problem before W8 came along but not regularly) have these in common and I believe are source of trouble. All have installed QuickBooks 2011, all needed to print to QB PDF creator by Nuance, that does not work and causes QB app not responding. All
are setup with same printers. So you would say " there you go!! QB 2011!" well not so quick. Removed it from 2 of the PCs no change in the issue.
What I'm experiencing now. W8.1, can not add remove Printers error > Print Spooler not running! I go to services etc. Print Spooler is Auto and running! I restart it or put on Manual it shows running but Add printer no go again. W7 machine - Devices Printers
won't open (EVER!) besides that if I try to Right click any file / folder Windows Explorer Not Responding error. On this W7 is unusual there is A printer (Epson) being installed on other network that I go occasionally, both W8 sort of inherited
the printer that doe not physically exist on their network group. And can not be removed or when I was lucky enough and had W8 Devices and Printers OK I removed it and it came back after while. Also on W8 there are multiple printers showing of same
model but can not be removed are not active. I mean printers I have on the network. And one more thing right now none of the active printers is default! And I can't make it default. Right click menu does not offer it! see attached. sorry not allowed attach
just trust me.
Please, please Microsoft God (and smart people around the world) help.

F4280 wireless printing windows 7 64-bit, not showing printer in "devices and printers"

Similar Messages

Maybe you are looking for