FaceTime expired device certificate work around

I'm looking for a work around for FaceTime expired device certificate.I have iPad 2nd Gen and an iPod 4th Gen both have IOS 5 that use Google Map. If I upgrade my IOS, Google Maps will be uninstalled. Looking at the Apple forums the only way to fix this is to upgrade my IOS, this is not going to happen. it is stating to look like Android might be a better solution. Any help would be great.
If only Apply and Google could get along.
Thanks

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Similar Messages

  • Work-around to "unknown device" problem

    I found a work-around to the "unknown device" problem, a pain to do, but much less painful than any alternatives I've found so far.
    In my case, I can connect my Ipod one time. After I eject it, if I reconnect, I get the Unknown Device error. That's where this work-around comes in.
    There is an INF file (a Windows hardware configuration file) in the Windows\INF directory that has a name that will be specific to your computer. Once you determine that file, you need to re-install it. Re-installing it allows the Ipod to be recognized the next time it is connected. These are the steps:
    1) Determine the file name on your computer. You only need to do this one time, and then remember the name. Using Regedit, navigate to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-44455354 0000}. Then do an Edit / Find for "ipod" without the quotes, making sure that "Data" is checked and "Match whole string only" is not checked. It should find "Apple iPod USB Driver" in the "DriverDesc" value in one of the sub-keys. There will be another value called "InfPath". The data for that is the file name for the INF file on your computer. On my computer it is oem51.inf. It will be something like that on yours.
    2) In Windows Explorer, go to C:\Windows\Inf and find that file. In addition to "oem??.inf", there will be an "oem??.pnf" (same numbers), which is a binary version of the .inf file. Delete that file, or rename it if you prefer. If it exists, step 3 will not work.
    3) Right click on the .inf file and select Install. The computer will chug for a few seconds. The .pnf file should reappear and, more importantly, your iPod should now be able to connect one time. At least it does for me.
    I hope that Apple puts out a fix for this problem sometime soon. Meanwhile, doing steps 2 and 3 every time I want to connect is annoying, but bearable.

    I would like to apologize for posting this message. I promise that it did work and did seem to be the solution at the time I posted it, but it helps me no longer. My Ipod was recognized several consecutive times after I posted this with no work-around, but then it became an unknown device again, and there it stays, seemingly forever.
    I am a highly skilled and experienced Windows system programmer, and this has me stumped. I apologize for any time that my message may have wasted for others. I have also tried every other solution that has been posted here and elsewhere, and none work.
    I would recommend that Apple pay me a lot of money to find and fix this problem. Short of that, they should pay someone else to fix it. To have this many fatal problems for so many people should be considered unacceptable. Until a fix is available, I shall just be happy that I got as much onto my Ipod as I did before it became unavailable.

  • I gave my granddaughter a mini.  She says she can only text message to other IOS devices.  Is this true?  If so, is there a work around app?

    I gave my granddaughter a mini as a gift.  She says she cannot text message to non Apple users.  Is this true?  If so, is there a work around app?

    With the imessage app that is pre installed on the device it only works with idevices. But there are many free apps for texting. For example text free is a great one.

  • FaceTime stopped working around 12th April 2014.

    I have an iphone 4 iOS 7.0.3 and FaceTime stopped working around 12th April 2014. This is the same for other members of my family (using another iphone 4, an iphone 4s and an iPad). As soon as FaceTime connects it drops the call immediately. Does anyone else have this issue?

    Read through this Apple article on how to correct this problem.
    http://support.apple.com/kb/TS5419

  • Work around for scanner on epson wp 4530 all in one device after Maverick update

    Epson technical staff helped me find the solution to find the scnning function from my 4530 all in one device.  Using "image cpature" command in "spotlight", find scanner in "shared" apps, then use the scanner function from there. 
    Before Maverick update, the scanner button light up in the 4530 device and I can scan from the window with the device.  Now I have to work around to get the job done.  Apple or Epson need to develop a new driver to recover this funtion.
    KL

    There's no need to use Spotlight for Image Capture.
    Launch Image Capture located in your Applications folder.
    Connect the scanner to your Mac whether Wi-Fi or USB.
    Click the very small black box bottom left side of the Image Capture window.
    You'll see this pop up menu:   Connecting this (device) opens:
    You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
    If you need help with the Image Capture software, click Help from the Image Capture menu bar.
    Mac Basics: Using a scanner

  • I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

    My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

    I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
    However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
    Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
    It also had no internet issues and none of the problems others have complained about in other threads.
    unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
    Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

  • Is there a work around to use two Apple IDs across and iPhone and a MB Pro?

    iPhone 5 and Macbook Pro Retina late 2013.  iOS 8.1 and Yosemite. 
    It's a company iPhone and a personal MBP.  Phone has an Apple ID associated with company credit card and MBP personal Apple ID with personal credit card.
    There is a cross platform issue as you cannot use two Apple IDs in Facetime and Messages.  Therefore my iPhone and MBP do not interoperate correctly, for example, a text message in messages on the iPhone will not appear in Messages on the MBP.  Similar situation for FaceTime.  When you try to enter the second email associated with the second Apple ID on either platform you get "cannot verify because email is already in use".
    Any work arounds?
    This is something Apple should have really anticipated as iPhones become more widespread in corporate use.

    Thank you for your continued interest and research on my behalf on this situation. I was on the phone with Apple support (at no charge) for over an hour yesterday. Becasue I have what they cal a "vintage computer"(7 1/2 years old), there are some additional issues.  We thought it was solved at teh end of the phone call but aparently it was not. I am going to call them now and see what else can be done. I will keep you posted.
    Thanks again.

  • Is there a work around to connect an archos 80 g9 to a-digital editions?

    My tablet is not listed in the supported devices list for adobe digital editions - but I am hoping there is some work-around/app that will enable me to read content vial ADE from our local library.
    Works fine with a different tablet that my wife has - but the ADE software somehow does not "see" the archos 80 g9 even though the PC has correctly identified it and loaded drivers etc.
    Gratefull for any tips...?

    My tablet is not listed in the supported devices list for adobe digital editions - but I am hoping there is some work-around/app that will enable me to read content vial ADE from our local library.
    Works fine with a different tablet that my wife has - but the ADE software somehow does not "see" the archos 80 g9 even though the PC has correctly identified it and loaded drivers etc.
    Gratefull for any tips...?

  • Syncing of Apps and a Work Around I Thought Of

    (this is an excerpt from a previous thread which was not answered - if you could kindly help me out with this and offer your expertise it would be greatly appreciated. Thanks!!)
    Hi All,
    I know this will be quite a change of tone from what you've been getting so far here in this thread, but I want to start of by saying thank you, for all the help and guidance you have been and are giving us. I greatly appreciate it.
    I have a question on apps folder structure upon restoring from backup. I will share with you the chronology of events, what I understand, what I hope to achieve and what ways I think this can be achieved. By sharing with you my whole thought process, I hope to get your critique and correction if at any part I have misconstrued the logic. Thanks in advance again.
    I have 2 iPhone and 2 iPads. When I bought my first iPad (brand new) I plugged it into iTunes and did a restore from my iPhone 4G backup. I believe I selected "Sync Apps" (though I can't confirm now cause I formatted my computer already) because all my iPhone apps were synced to my iPad - which is great. Q1 --> Because I restored from my iPhone 4G backup which presumably had "Sync Apps" checked, I believe my first iPad's iTunes syncing options also had "Sync Apps" checked as well - reason is that all the "Music", "Movies" and "Photos" options were also transferred over. Am I correct? Thanks
    So for the rest of the post, I will assume the iTunes setting for my 1st iPad was set to "Sync Apps" (until you correct me otherwise).
    My computer was running a bit crappy --> Windows, I know haha, so I formatted it. I did not save my backup file to an external harddrive and then put it back into the %appdata% iTunes Mobile Sync folder. Therefore after formatting, I plugged my iPad into the new computer and did a backup. Because (if I remember correctly, - (Q2) please correct me if I am wrong) it sensed my iPad as connect to a previous iTunes it asked me if I wanted to disconnect from the previous iTunes and sync to this one cause I do know that we can only sync to one iTunes at a time. I had to re-configure all my "Music, "Movies" and "Photo" settings again as this was a new iTunes configuration - which I do understand. Q3 - if I have a new iTunes because I formatted my computer, but I ported over the old backup file and restored my iPad from there, would it still be considered a new iTunes link and thus I have to configure everything again? I don't think so cause the backup contains all the settings; what I think will happen is that I will just be asked if I want to disconnect from the old iTunes and connect to the new one, and all my settings will be restored from the backup.
    So I synced my "Music", "Movies", "Photos" and also "Info" and "Podcasts" (I don't use "TV Shows") and got it all set up. Only thing I didn't tick was the apps - perhaps cause I didn't take the time to understand it previously owing to the fact that I didn't need to then ha, but now I do!! So after everything was synced, I did a backup. After reading your thread, and the link you gave, I understood that I have to transfer purchases from my iPad because my iTunes had no apps - as it is a "new iTunes". So I transferred my purchases.
    Next I joined my 2nd iPad (second hand iPad) and did a "Restore" (If you are experiencing problems with you iPad, you can restore its original settings by clicking Restore.) to wipe out apps etc that the previous owner had. Q4 - what is the difference betwixt the "Restore" in iTunes below "Check for Update" and the iPad's "Settings" --> "General" --> "Reset" --> "Erase All Content and Settings"? I believe (with some experiments ha) the "Restore" in the iTunes will give me a "brand new" iPad but I don't know what is the difference betwixt that and "Erase All Content and Settings".
    I then restored from the backup of my 1st iPad. But remember just now I mentioned that I did not tick the "Sync Apps" in my 1st iPad's settings? So after the restore was done, I had all my "Music", "Movies" and "Photos" + "Podcasts", "Info", everything but my "Apps" --> because I didn't tick "Sync Apps" in my backup. So my 2nd iPad had everything but "Apps".
    Now I need to rectify that and create a mirror of my 1st iPad. I don't jailbreak my iOS devices and all my Apps are bona fide purchases with my hard earned money . Here is the solution I thought of and the single problem I face.
    Solution: On my 2nd iPad, click Sync Apps, select all the apps I want in my iPad, and then click Apply. Then I restore the backup of my 1st iPad. That restores all my app data and very importantly, my folder structure (cause when we have a lot of apps and we organise it all into folders, re-putting them back into folders can be quite time consuming; quite the antithesis of computing in the first place).
    This truly give me a mirror image of my 1st iPad (please kindly correct me if I am wrong). The only problem is that, the Sync Apps is still not ticked. Q5 - Is there any benefits of my ticking "Sync Apps" vis a vis doing it this work around method? (Update: I thought of something - "Sync Apps" would allow all the apps on my iPad to be automatically synced to my iTunes but for my work around, I need to think of all the apps I want on my iPad and tick them. If it is for example 50 out of 50 apps, it's simple. But if it's 50 apps out of 150 apps in my iTunes then it would be a big headache. Any other benefits / costs?) My "File Sharing" is still working ok - in the sense I can still transfer data to my apps without having it synced (thankfully it is not sync dependent - but please once again correct me if I am wrong).
    The reason why I do this work around method is because if I were to click "Sync Apps", it would get all my apps into my iPad but it would destroy all my folder structures. Q6 - however if I do this "Sync Apps", when the apps are transferred to my iPad I would have all the app data on my iPad already right? Because I postulate it work on a n-tier abstraction separating data from the app. I think this is true because previously I restored from backup and had some apps missing, but when I downloaded the app all the data was "magically" there.
    Q7 - is there any way to maintain apps folder structures when I am syncing to a new iTunes instead of the work around I have thought of?
    Q8 - and last question haha. My iPad has 10 3rd party apps now for example. If I backup now, it would backup the app data of all 10 apps (3rd party apps - notation left out for simplicity sake moving forward). However if I deleted 2 apps from these 10 apps, then if I backup the 8 apps, would it mean that the backup no longer stores the 2 deleted apps's app data? I think that would be the case but I would just like to confirm.
    Thank you for reading my very long post and I really appreciate all your help, Allan and all others. Looking forward to your advice, guidance and response!! Thank you once again!!!
    P.S. does iTunes lag quite a bit in Windows (if you are a Windows user)? For me it's not the quickest programme around; can get quite laggy sometimes, on my newly formatted and empty 64 bit 4GB Dual Core 2.4 GHz HP TX2 and Acer computer as well

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • The Ipod cannot sync - disk cannot be read from or written to - Work around

    I have been having the same problem and have talked to Apple support several times. It seems like the major problem is with Windows xp media center edition. They got back to me today with not a solution, but a work around. It seems to be working so far. If you are running media center edition open device manager and expand universal serial bus controlers by clicking on the + sign (with the itouch not connected) If you see "standard enhanced pci to usb host controller...right click on it and choose disable. Close device manager and reconnect your itouch to the computer. The sync will be much slower but it seems to be working for now. I spoke to a level 2 product specialist, and he was very helpful in giving me this "work around". He promises to get back to me with a fix asap. In that event I'll post the fix here.
    Thanks,

    Yes yes this worked for me too! ***?
    I have Windows Media Center as well. I have tried EVERYTHING and I mean EVERYTHING including reinstalling my OS. I have spent all of yesterday and all of today not to mention much time over the last few months trying to get it to work better. Not since getting my iPod have I ever been able to get everything to sync. Restores simply resulted in movies that previously worked not working and ones that didn't start to work. Oh and this is my third individual one. Seriously this works, but is a pain because now a single movie takes about 20 minutes or so to copy. Lame. Well I am going to call Apple tech support and mention this to them and also put something into feedback. It is ******** that people have to jump through so many hoops to get this to work. Apple is lucky this isn't my sister or my girlfriend. Anybody who doesn't have much experience with computers would be lost.
    Thanks though! Same here, you saved my life as I was seriously ready to throw this out the window, as much as I love it! :O
    Apple, please do something about this.

  • The Skinny on IMAP vs POP Email and work arounds

         It took me a while to figure out email so I figured I'd share what I've learned so far.  Do feel free to reply with more useful tips for us all if anyone has some.
    First email accounts are either IMAP or POP and the first step was figuring out the difference:
    IMAP
       Mirror of the server
    What is done one place is done everywhere because you are looking at the server.
           Advantage: can access email from multiple devices/locations
           Disadvantage: May have to mark as read individually when adding to a new device
    POP
       Independent of the server
    What is done one place stays that place because you have moved it from the server.
            Advantage: once it's delivered the mail can be viewed offline
            Disadvantage: where ever it is delivered once, the other divices do no have access to the mail
    Think of the server as a huge mailbox as big as a room!
       IMAP
    With IMAP the mail stays in the mailbox until you delete it permenently,
        but once it is deleted it has moved out of the main part of the huge mailbox into the trash can in the room of the huge mailbox (the trash folder settings decide when the trash gets taken out and deleted permenently) when deleted permenently it is no longer in the trash can in the huge mailbox it has been taken out the the dump.
    If you read it then it's like opening the mail but leaving it in the huge mailbox.
    If you move it to another folder then it's like moving it to the desk in the room but still in the mailbox.
       POP
    With POP the mail is taken out of the mailbox and moved to the computer (in the other room)
    Once you request/download your mail it is taken off of the server and whatever is done with the mail the server no longer has access to it
    If you read it (or move it to a folder) it is the same thing as Mom taking the mail out of the huge mailbox and putting it in the car, if Dad checks the mailbox the mail may have been delivered by Dad is not going to find it because it is no longer in the mailbox it is with Mom in the car.
    Here a link that helped me figure it out:
    http://www.office.mvps.org/glossary/pop_imap.html
    So after you decide wether you want to use IMAP or POP which email carrier is which?
    Microsoft Exchange is IMAP
    MobileMe is IMAP
    Yahoo! mail is IMAP
    Hotmail is IMAP
    Gmail is IMAP can be set up as POP
         see here for that:  https://discussions.apple.com/message/8149520#8149520
    ~Most web-based email is IMAP (if it is designed to be accessed via the web by ANY computer it's likely IMAP)
         settings for incomming/outgoing servers:   http://www.emailaddressmanager.com/tips/mail-settings.html
    AOL is POP can be set up as IMAP (origanally intended to be used with only one computer via the ISP)
          see here for that: http://email.about.com/od/aoltips/qt/Access_an_AOL_Email_Account_with_any_POP_IM AP_Email_Program.htm
    Comcast is POP
    Qwest is POP
    Earthlink is POP
    ~Most ISP (internet service providers) email from a cable/internet company of a business specific email is a POP account
    Use this chart HT1277 ( http://support.apple.com/kb/HT1277 ) for contacting your service provider or IT department to acquire the proper settings for your email account!
    Finally, as promised, work around for your email:
        If you only have access to a POP email account and it won't work on your iPhone or want it to act like an IMAP account, then follow these steps~
    1)   Get a free IMAP email account (using Gmail for this example)
    2)  Sign in to your Gmail account
    3)  Click the gear icon in the upper-right
    4)  Select Gmail settings
    5)  Select the Accounts and Import tab
    6)  Under Send mail as, click Add another email address
    7)  In the 'Email address' field, Enter your name and alternate email address (ie the POP address)
    8)  Choose use Gmail's servers to send your mail
    9)  Click Next Step>>
    10) Click Send Verification
                 (Gmail will send a verification message to your alternate email address to confirm that you own it)
    11) Open your other account and click the link in the message Gmail sent
    12) Add your new Gmail account to your iphone
    You will be able to send, receive, reply, forward, delete, and manage folders of your other address through your Gmail address on your phone and it will appear to the recipients as though it came from your other address.

    Allan, I have run into questions in this area recently since I got my iPhone. I have a long time Charter ISP POP email account which I've accessed with Apple Mail. This has worked fine. I also have a Yahoo web based account which I've also used separately.
    Now when I set up my Yahoo account on my iPhone it worked great. But when I set up the Charter account it resulted in an IMAP account with incoming and outgoing servers being mobile.charter.net. Charter website implies that all email accounts on all mobile devices must be set up like this. My question is whether I can, or should, try to set up the account manually as a POP on my iPhone so it will behave similarly to the Charter POP account in my iMac?
    I've run into some conflicts after using my iPhone to access my Charter email. My inbox on my desktop iMac in Apple Mail will give me the message that another client is accessing the email account when I try to get new mail soon after my iPhone has been accessing the Charter account. I've wondered whether this is a conflict between IMAP and POP?
    Confusing. Thanks.
    Steve M.

  • New Q-10 User - Complaints -- Looking for Work-Arounds

    BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work.  And without this feature, I sense it impacts use of the device in many ways.
    Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB.  Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
    Upon set-up, all Outlook contacts did not interface to the BB.
    When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar.  This causes false availability highlighted on Outlook.
    Replying to email and accepting calendar invites on the BB do not show an indication of response/acceptance on Outlook.  This is very confusing, as I have to personally recall what I’ve replied to on the BB before filing on Outlook.
    I'm guessing I will have more difficulties...but these are major inefficient issues for me. If anyone has "work around solutions" here, please let me know.

    Hello scottjones92660;
    Welcome to the forums and thank you for your question.
    In response to your inquiries I have included the following response for your perusal;
    “BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work.  And without this feature, I sense it impacts use of the device in many ways.”
    The BlackBerry 10 devices utilize ActiveSync to communicate\sync with end user mailboxes. Although the BlackBerry Enterprise Service 10 does provide security to devices and will setup and separate a Work Perimeter in addition to the Personal Perimeter, devices can also be activated strictly to ActiveSync only.
    “Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB.  Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
    Upon set-up, all Outlook contacts did not interface to the BB.”
    I am unsure as to your question as it seems contradictory to your above statement. You state the Q-10 does not have a feature to prevent two-way synchronization of mail, which is typical of ActiveSync activated devices. You go on to say that this is inefficient as you have to go through mail on the mail client and on the device.
    The device is utilizing ActiveSync synchronization, as such what is deleted on device or mail client, will sync with the other. If this is not the case and what is deleted on the device or mail client is not syncing, it is possible you may have an incomplete activation. This may also allude to the issue that all contacts from the mailbox Contact Parent Folder did not sync to the device.
    “When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar.  This causes false availability highlighted on Outlook.”
    When a device is activated on the BlackBerry Enterprise Service 10, the device calendar can be accessed from the Personal Perimeter as well as the Work Perimeter.
    The Free\Busy feature with ActiveSync is availability starts in version 14.0 With Microsoft Exchange Server 2010.
    If calendar invites are sent to and accepted by the corporate email account on a device that is activated on a BlackBerry Enterprise Service 10, they will be visible on both Perimeters.
    The following is a link to the BlackBerry Enterprise Service 10 guides and documentation and Microsoft ActiveSync;
    BlackBerry Enterprise Server 10
    Microsoft ActiveSync FAQ;
    Let us know if you have any further questions regarding this specific request.
    MAD-VIKING

  • In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

    In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

    Nic, for me the iTunes window looks like this, when I connect my iPad 3:
    I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
    Click the "Apps" tab in the "Devices" pane.
    Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
    Then do I click "GarageBand" to select the documents in the right panel.
    Which part is different for you? Perhaps you could post a screenshot?
    Regards
    Léonie

  • IPhone not sending POP mail?  Here's a work-around.

    Like some other people out there, I haven't been able to get the Mail App on the iPhone to talk nice to my POP email host's server. It receives mail just fine, but will not send. I've tried all the fixes I could find suggested out there, and had several back-and-forths with my server host's tech support, and then spent (literally) two hours with an upper level Apple tech trying to get the device and server working together . . . to no avail.
    Until such time as my server opens up a new hole and allows easier access . . . or until Apple figures out some way to penetrate the pinpricks that are already there . . . I've come up with a reasonably good work-around that might be helpful for some of the others out there who are having similar issues.
    It's a little convoluted, but it's easy to do, and there's no hacking/tinkering . . . so just follow it step-by-step.
    1. Create a Gmail Account. Ultimately, you'll be sending your regular POP account mail through their server . . . so you'll need a Gmail Account.
    2. Once that's created, there's an option to: "Use Gmail to send from your other email addresses" . . . and we're gonna get that set up now. To do that, log into your Gmail Account. Then go to Settings (at the top-right of screen). Then go to Accounts (the second Tab over). Then, where it says: "Send Mail As:", click on the option to "Add another email address". That'll open up another box that let's you fill in the name and email address of an alternative email account. Put your primary POP email account information here.
    3. Gmail will then take you through a brief verification process, to determine if, indeed, you actually have access to the POP email account that you're trying to "spoof". Just follow the instructions.
    4. Now, let's fix our iPhone's settings so that our POP account can use Gmail's Outgoing SMTP mail server. Go to your Mail Settings, and select your POP account (assuming you've already got one created that has the Incoming mail part working just fine). Scroll down to your Outgoing Mail Server settings, and either turn off your delinquent primary server and add a new server with the settings I'm about to give you. Or, what I did was, just change your primary server info to the following:
    5. Here's the server settings that will work:
    Host Name: smtp.gmail.com
    User Name: use your full gmail email address
    Password: use your gmail password
    Use SSL: Turned On
    Authentication: Password
    Server Port: 587
    6. Now, you should be able to send mail from your POP account through the Mail App on the iPhone, using Gmail's SMPT server as a proxy. You can already use the AT&T outgoing server settings in this same way, actually . . . but only when you're on the AT&T network (Edge or 3G) . . . not when you're on a Wi-Fi network.
    Truth is, this trick would work even if we didn't do Step #2 and Step #3 . . . but then the email that we sent from the iPhone would have our Gmail Account information in the headers of our sent email, rather than our POP accounts reply-to information. Following Steps #2 and #3 make it appear as though the mail was still sent from our primary POP account.
    Hope that's useful for someone else out there, that's been knocking their head against a wall trying to get their mail up and running. I'll post this on a few forums.
    All the best --
    D

    I don't get any pop-ups anywhere nor any menus (if there are supposed to be some). The code is rather messy, also, with all those on-the-fly definitions for styles and endlessly long JavaScript actions. Quite possible that the links override one another. Not to ruin your day, but I'd definitely start from scratch with an empty page and a clean style sheet for the various elements. IMO that's the only way to get this working properly.
    Mylenium

  • Work around "cannot copy to disk.....cannot be read from or written to.

    While copying large files(movies or large amounts of music)to the iPod touch the error message" disk cannot be read from or written to" appears. Here is a work around for the failure.
    1. Run the latest version of iTunes and connect the iPod. Perform the following after the failure (allow one failure to occur and repeat this after each occurence) This is only good for one movie or one large grouping of music files. Eject the iPod and allow 30 seconds after the plug is pulled before reattaching the plug to the iPod. Once the summary window appears you are ready to start.
    2. In the movie tab behind the summary remove SYNC Movies check from the box.
    In the Music tab remove the SYNC Music check from the box.
    3. On the summary tab uncheck "manually manage music" in the options section. It will ask if you are sure, choose OK. Click "Apply" in the bottom right corner. Allow the iPod to try to SYNC... a message will appear explaining that there is not enough disk space, choose "OK".
    4. Check "manually manage music" in the options section. Click "Apply" in the bottom right corner.
    5. Drag and drop the selection of music or the movie over to the iPod icon on the left side of the screen under "Devices". The transfer should start and the progress graphic will start in the upper status window.
    ***I have only been able to move/ copy one movie at a time and one large music selection. When attempting the second transfer the error message returns and you have to start the process over. I tryed restoring, updating iTunes, different cables, updating XP, different USB ports, countless system restarts and threatening to smash it if it didn't work. I spoke with APPLE Tech support and they are aware of the problem and should be attempting to correct it. My iPod is @ its default settings. I have had no problems with single music files transfering but I have had it fail on as little as three in a group. Good Luck and I hope this helps.

    Here is some more info on this issue. I've been having the same problem - I've tried disconnecting all other USB devices, making sure to plug into the back-side USB 2.0 port, I even went and bought a PCI card 2-port USB hub and tried that, but could never sync movies or multiple songs (usually less than 50 songs). Today, I was able to transfer 2 movies and a TV show and about 100 songs and the one thing that was different was that I was doing a video conversion in the background with FFMPEG (taking up about 90% CPU), so iTunes only had about 10% CPU while doing the sync.
    Unfortunately, as I started typing this message, a third movie transfer just failed with the "cannot copy to disk..." read/write error. Oh well, just thought I'd get the info out, as this is an exteremely frustrating issue, and hopefully the more info we have we'll eventually be able to figure it out.

Maybe you are looking for