Factory calendar Generic Extractor

Hello everybody,
I was wondering if there is a generic extractor for the Factory calendar in R/3 (SCAL transaction).
Thanks in advance.

Hi Alberto,
go to RSA1 > Source Systems (your R/3) > right click > Transfer Global Settings >> than you can update among other things like currencies, the factory calendar.
Hope this helps.
Greets,
Sarah

Similar Messages

Generic extractor is not reading delta

Hi !
I have a generic extractor with delta queue, for a Z view.
The delta is on 'ZLOAD_DATE' field / calendar day /safety interval upper limit = 1 / new status for changed records
In BI the init with data is ok.
In ECC the delta queue (RSA7) show as actual status: 03 June 2010
then, I add 3 new records
ZMAT    ZLOAD_DATE
x            01 June 2010
x            02 June 2010
x            03 June 2010
But when I run again the delta load in BI, dont load any records.. (0 records readed)
> What is wrong?
Thanks in advance!

Hi Prem
The new record were created after the init (the same day), but specify manually in the ZLOAD_DATE several dates (diferent from the real load date, today)
1 - If I load records today and after run a delta, can I see they in BI or I need wait until tomorrow?
2 - if the upper limit is regarding the actual date, which is the meaning of specify a delta key field?
3 - if I want a delta with the same behaivour than standard delta, do I need add the field timestamp to the table, and change the extractor?
Thanks for your support!

Difference between Planning Calendar and Factory Calendar

Hi,
Can anyone clarify me how Planning Calendar is different from Factory Calendar?. When do we maintain Planning Calendar?. Does we need to follow any steps in configuring Factory Calendar?. Please explain in detail. Thanks for ur support.

AS,
Can anyone clarify me how Planning Calendar is different from Factory Calendar?. When do we maintain Planning Calendar?. Does we need to follow any steps in configuring Factory Calendar?
I guess you must have overlooked the rules of engagement. It is customary in these forums for questioners to first perform basic research before posting any questions.
First, search in the forums (search box in the upper right of this page).
Next, check online help. This help is generic. For instance,
Planning Calendar
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d25ea44af11d182b40000e829fbfe/frameset.htm
Factory Calendar
http://help.sap.com/saphelp_erp60/helpdata/en/2a/fa00c2493111d182b70000e829fbfe/frameset.htm
Next search in one of the standard online search engines (such as Google).
If you have performed all of these tasks, and studied all of the online help that is supplied for free by SAP, then consider posting a question to these forums.
If you are unwilling or unable to perform such research, then you should probably engage a consultant to assist you.
Best Regards & Good luck,
DB49

Factory Calendar issue in creation of Sales Order/ Delivery Order

Hi all,
There is one issue. Our user is not able to create Sales Order/ delivery order as he is getting the below error message u201CDate 2010-12-27 lies after the end of Factory calendar F1u201D. But when I checked the plant in customization, the Factory calendar assigned is u201CKRu201D and not u201CF1u201D. So I donu2019t understand why this error message is appearing. But when I checked Factory calendar u201CF1u201D, it was valid only up to 2010 and there are special rules also set. Only few days in the year are working days. Factory Calendar u201CF1u201D description says u201CKOR customers billed on the 25th of every monthu201D
Please advice.
Regards,
Brijesh

Dear
If F1 is the correct calander , then goto OP03-Calander Maintenece -select the Holoiday Caleneder and extende the Valaidity till 2020 and also Select the Factory Calander do the same till 2020 .Now Goback to main screen of OP03-Plant asisngement -re-assing the same F1 calaneder .
Secondly check the factory calender of the plant in OX10.Then in SPRO > enterprise structure >Definition > logistic execution>define shipping point .Select you shipping point and assgin the proper factory calender
.Goto OVX5 , choose your sales organization, click on details, Detailed information tab - Sales Org Calendar (maintain your factory calendar here not Sale Org Calander )
.Check in VOV8, use the "Propose delivery date" and "Lead time in Days" options to default today's date as the requested delivery date.
Refer : Public holiday dates issue
Regards
JH

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

Creation of generic extractor in CRM

Hi Experts,
I want to create generic extractor in CRM.
In R/3 we can use table like VBAK,VBAP..etc while creating Generic extracor.But I am not able to find tables for transactions like Activities,Opportunities ...etc in CRM.
Pls let me know how to find tables in CRM.
Regards
Vishal.

Hi Vishal,
The orders tables in CRM are CRMD_ORDERADM_H (header) and CRMD_ORDERADM_I (item-level).
For other tables, usually they begin with CRMD_*. They're related to document informations, like for example: CRMD_PARTNER for partners, CRMD_ORGMAN for document organizational data, and so on....
Kind regards,

Delta fo Generic extractor using function module

Hi,
I am using the following function module for generic extractor but its always showing me extraction error.Could anyone please suggest to resolve the issue.
Thanks in advance fo rsuggestion.
FUNCTION Z_BW_SALESDATA_EXTRACT_CHNG2.
""Local interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*"     VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*"     VALUE(I_PRIVATE_MODE) OPTIONAL
*"     VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_DATA OPTIONAL
*"      E_T_SOURCE_STRUCTURE_NAME OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
The input parameter I_DATAPAKID is not supported yet !
Example: InfoSource containing TADIR objects
TABLES: VBFA,VBRK,tadir.
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
user defined variables.
DATA : X_UPDMODE(1) Type c,        " Update Type
        X_LastUpdate Like Sy-Datum. " Last Update Date
         X_LastUpdate TYPE RODELTAID. " Last Update Date   "TCS_KAP
Select ranges
RANGES: L_R_VBELN   FOR VBAK-VBELN,
          L_R_AUDAT   FOR VBAK-AUDAT.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
    IF NOT g_flag_interface_initialized IS INITIAL.
      IF 1 = 2. MESSAGE e008(r3). ENDIF.
      log_write 'E'                    "message type
                'R3'                   "message class
                '008'                  "message number
                ' '                    "message variable 1
                ' '.                   "message variable 2
      RAISE error_passed_to_mess_handler.
      ENDIF.
Check InfoSource validity
    CASE i_isource.
      WHEN 'Z_BW_SDDATA_CREATEON'.
      WHEN 'Y'.
      WHEN 'Z'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_isource            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
Check for supported update mode
   CASE i_updmode.
     WHEN 'F'.
     WHEN OTHERS.
       IF 1 = 2. MESSAGE e011(r3). ENDIF.
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '011'                "message number
                 i_updmode            "message variable 1
                 ' '.                 "message variable 2
       RAISE error_passed_to_mess_handler.
   ENDCASE.
Check for obligatory selection criteria
   READ TABLE i_t_select INTO l_s_select WITH KEY fieldnm = 'VBELN'.
   IF sy-subrc <> 0.
     IF 1 = 2. MESSAGE e010(r3). ENDIF.
     log_write 'E'                    "message type
               'R3'                   "message class
               '010'                  "message number
               'PGMID'                "message variable 1
               ' '.                   "message variable 2
     RAISE error_passed_to_mess_handler.
   ENDIF.
   APPEND LINES OF i_t_select TO g_t_select.
Fill parameter buffer for data extraction calls
    g_s_interface-requnr    = i_requnr.
    g_s_interface-isource   = i_isource.
    g_s_interface-maxsize   = i_maxsize.
    g_s_interface-initflag = i_initflag.
    g_s_interface-updmode   = i_updmode.
    g_s_interface-datapakid = i_datapakid.
    g_flag_interface_initialized = sbiwa_c_flag_on.
Store Update mode in static variable...
   X_UPDMODE = I_UPDMODE.
    Select Single DELTAID
           Into   X_LastUpdate
           From   ROOSGENDLM
           Where OLTPSOURCE = 'Z_BW_SDDATA_CREATEON'.
    If X_LastUpdate Is Initial.
      X_LastUpdate = '19800101'. " The oldest..., this should not happen
    Endif.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO g_t_segfields.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
X_UPDMODE = I_UPDMODE.
First data package -> OPEN CURSOR
    IF g_counter_datapakid = 0.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'VBELN'.
        MOVE-CORRESPONDING l_s_select TO L_R_VBELN.
        APPEND L_R_VBELN.
      ENDLOOP.
      LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'AUDAT'.
        MOVE-CORRESPONDING l_s_select TO L_R_AUDAT.
        APPEND L_R_AUDAT.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
*added by Yogesh
      DELETE FROM ZBWSALEDATA.
*ended by Yogesh
      l_maxsize = g_s_interface-maxsize.
Check for supported update mode
      CASE X_UPDMODE.
        WHEN 'F' Or 'I'. " Full or Init
**get sales orders
          SELECT *
                       INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
                       FROM VBAK AS K
                       INNER JOIN VBAP AS P
                             ON PVBELN = KVBELN
                       WHERE K~VBELN IN L_R_VBELN
                       AND   K~AUDAT IN L_R_AUDAT
                       AND   K~VBTYP = 'C'.
          IF I_SALESDATA[] IS NOT INITIAL.
            PERFORM F_GET_DATA.                   "get data
            PERFORM F_DEL_VATCOND.                "delete vat conditions
            PERFORM F_GET_TAR_COSTUNIT.           "get tariff cost unit
            PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
            PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
            PERFORM F_INSERT_DB_ZBWSALEDATA.      "insert into table ZBWSALESDATA
           LOOP AT I_SALESDATA WHERE NETPR = 0.
             MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
             APPEND I_SALESDATA_FIN.
           ENDLOOP.
           SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
           DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
                                           COMPARING VBELN POSNR
                                                     KSCHL.
           INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
          ENDIF.
        WHEN 'D'. " Delta
          SELECT *
                         INTO CORRESPONDING FIELDS OF TABLE I_SALESDATA
                         FROM VBAK AS K
                         INNER JOIN VBAP AS P
                               ON PVBELN = KVBELN
                        WHERE K~ERDAT >= X_LastUpdate
                         WHERE K~ERDAT >= X_LastUpdate+0(8)          "TCS_KAP
                         AND   K~VBTYP = 'C'.
          IF I_SALESDATA[] IS NOT INITIAL.
            PERFORM F_GET_DATA.                   "get data
            PERFORM F_DEL_VATCOND.                "delete vat conditions
            PERFORM F_GET_TAR_COSTUNIT.           "get tariff cost unit
            PERFORM F_GET_NETVAL TABLES IT_VBDPA1. "get net val of the item
            PERFORM F_GET_SALESDATA.
*write perform with name F_INSERT_DB_ZBWSALEDATA.
            PERFORM F_INSERT_DB_ZBWSALEDATA.      "insert into table ZBWSALESDATA
           LOOP AT I_SALESDATA WHERE NETPR = 0.
             MOVE-CORRESPONDING I_SALESDATA TO I_SALESDATA_FIN.
             APPEND I_SALESDATA_FIN.
           ENDLOOP.
           SORT I_SALESDATA_FIN BY VBELN POSNR KSCHL.
           DELETE ADJACENT DUPLICATES FROM I_SALESDATA_FIN
                                           COMPARING VBELN POSNR
                                                     KSCHL.
           INSERT ZBWSALEDATA FROM TABLE I_SALESDATA_FIN.
          ENDIF.
        WHEN OTHERS.
          IF 1 = 2. MESSAGE E011(R3). ENDIF.
          LOG_WRITE 'E' "message type
          'R3' "message class
          '011' "message number
          I_UPDMODE "message variable 1
          ' '. "message variable 2
          RAISE ERROR_PASSED_TO_MESS_HANDLER.
      ENDCASE.
**end get sales orders
      OPEN CURSOR WITH HOLD g_cursor FOR
      SELECT (g_t_fields) FROM ZBWSALEDATA.
     WHERE pgmid IN l_r_pgmid AND
                                    object IN l_r_object.
    ENDIF.                             "First data package ?
Fetch records into interface table. There are two different options:
- fixed interface table structure for fixed InfoSources have to be
named E_T_'Name of assigned source structure in table ROIS'.
- for generating applications like LIS and CO-PA, the generic table
E_T_DATA has to be used.
Only one of these interface types should be implemented in one API !
    FETCH NEXT CURSOR g_cursor
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE l_maxsize.
    IF sy-subrc <> 0.
      CLOSE CURSOR g_cursor.
      RAISE no_more_data.
    ENDIF.
    g_counter_datapakid = g_counter_datapakid + 1.
ENDIF.              "Initialization mode or data extraction ?
Best regards,
Yogesh

Dear Yogesh,
Try to debug the code by putting a break point at select statement...is the FM Syntactically correct ??
Check the Select statements..if all fields are not required avoid using Select * , and use always for all entries rather than JOINS..
Note : For Joins you have to specify the Fields in the Select...Dont use Select * ....
Hope it helps..
Thanks,
Krish

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

Working day to factory calendar date

Hello Experts,
I wish to get the factory calendar date, specific to a factory calendar, based on a working day.
Basically, if i pass say 4, then i want to get the date for the 4th working day based on a specific factory calendar.
Can someone throw some light on possible function module that i can use in BW ?
Thanks

That's what I was giving you, you give the working day and the factory calendar and you get the date, or you can use this function and you can do it the other way:
(Unless I'm completely missing your point here...)
    CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
    CORRECT_OPTION                     = '+'
    DATE                               = G_WORKAREA3-CREATEDON
    FACTORY_CALENDAR_ID                = L_S_PLANT-FACTCAL_ID
IMPORTING
*   DATE                               =
   FACTORYDATE                        = L_FCDATE
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    CORRECT_OPTION_INVALID             = 2
    DATE_AFTER_RANGE                   = 3
    DATE_BEFORE_RANGE                  = 4
    DATE_INVALID                       = 5
    FACTORY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
ENDIF.

Problem in creating a Generic Extractor on a custom 'Z' table

This is regarding an earlier question I posted in sdn today. I am trying to create a generic extractor on a custom 'Z' table and iam getting the following message.
Invalid extract structure template YBW_Z3PVR of DataSource YCNA_3PVAR_RPT
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure Z3PVR. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Please advise. how do i solve this?

Hi there,
Is your Z* table working? It must be add check field for quantity field and currency field.
Hope this helps.

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Error while creating Generic Extractor via Function Module

Hello Guys
I have created a Generic Extractor through a Function Module. I took the Standard FM: RSAX_BIW_GET_DATA_SIMPLE, gave it a new name and activated it. I made a few changes in it, like giving my structure name for E_T_DATA and giving the list of tables, from where I need to get the data. Then I created the datasource in RSO2 by giving this function module and the extract structure.
The DS was created properly, but when I check in RSA3 for records, its giving me an error: ---> <b>The extraction program does not support object YCNA_INVY_TRNS</b>
What do i do now? Can someone please tell me, what changes I need to make in the standard FM to suit my requirements??
Thanks.

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

How to find out the Factory Calendar ID used by an Organization

Hi Experts,
I want to know Factory Calendar ID used by an Organization.
Which table store the Factory Calendar information for an organization.
Is there any function module to get the Factory calendar of an organization.
Please help me ASAP.
Point will be rewarded for helpful answers.
Thanks in advance
Kulvendra Kumar

Hi
chk the view v_001p_m
there u can find ur org nization so there u wull find the calender assigned to them.

SNP Planned order not following resource bucket capacity/factory calendar

Hi gurus,
SCM 5.0
I am running SNP heuristics for a product and expecting planned orders for it. It has corresponding production data structure and multimixed resource. The resource has an assignd factory calendar and SNP bucket capacity. The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays. Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource. APO does not schedule on holidays consistent with bucket capactiy. This is true until...
We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday. The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change. However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday. Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
Any ideas on this? looks like a bug.

Hi Edgar,
Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
Since this is a mutlimix resource , it can also be checked if in PPDS planned order can be created on the day.
The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
regards
Datta

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

Factory calendar Generic Extractor

Similar Messages

Maybe you are looking for