Fail to contact HTTPS/SSL p2 repositories
I'm trying to add a custom HTTPS/SSL url repository to install from it an get. The repo is fine and can be installed otherwise. [You can only use links to eclipse.org sites while you have fewer than 5 messages. Therefore the link lacks the protocol https://]
ERROR: org.eclipse.equinox.p2.transport.ecf code=1002 Unable to read repository at bndtools.ci.cloudbees.com/job/bndtools.master/lastSuccessfulBuild/artifact/build/generated/p2/content.xml.
javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.ssl.Alerts.getSSLException(Unknown Source)
at sun.security.ssl.SSLSocketImpl.fatal(Unknown Source)
at sun.security.ssl.SSLSocketImpl.fatal(Unknown Source)
at sun.security.ssl.SSLSocketImpl.handleException(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at org.apache.http.conn.ssl.SSLSocketFactory.createLayeredSocket(SSLSocketFactory.java:554)
at org.apache.http.conn.ssl.SSLSocketFactory.createLayeredSocket(SSLSocketFactory.java:435)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.updateSecureConnection(DefaultClientConnectionOperator.java:216)
at org.apache.http.impl.conn.ManagedClientConnectionImpl.layerProtocol(ManagedClientConnectionImpl.java:394)
at org.apache.http.impl.client.DefaultRequestDirector.establishRoute(DefaultRequestDirector.java:814)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:615)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:446)
at org.apache.http.impl.client.AbstractHttpClient.doExecute(AbstractHttpClient.java:863)
at org.apache.http.impl.client.CloseableHttpClient.execute(CloseableHttpClient.java:82)
at org.eclipse.ecf.provider.filetransfer.httpclient4.HttpClientFileSystemBrowser.runRequest(HttpClientFileSystemBrowser.java:259)
at org.eclipse.ecf.provider.filetransfer.browse.AbstractFileSystemBrowser$DirectoryJob.run(AbstractFileSystemBrowser.java:69)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Am 30.06.2015 um 15:11 schrieb Peter Kirschner:
> I'm trying to add a custom HTTPS/SSL url repository to install from it an get. The repo is fine and can be installed
> otherwise. [You can only use links to eclipse.org sites while you have fewer than 5 messages. Therefore the link lacks
> the protocol https://]
And you've double-checked that that repository can be correctly loaded/used through p2's normal UI?
Similar Messages
-
DFS Replication failed to contact Domain Controller.....
I have seen this error since the inception of this stand alone AD PDC instance of Windows server 2012 R2 Essentials. I understand that Essentials does not support other Domain Controllers ; Member servers ; or trust between Domains of any kind. I also
understand that DSF Replication is a service that replicates files between other servers and other domain servers that Essentials dose not want to talk to.
So my question is why am I seeing this DFSR error 1202 in my event log, if Essentials does not support communication to other servers and domain servers? Maybe a better question is why does Essentials even try to implement this
service? Do I even need to try to resolve this issue or should I just disable it and move on?
Contents of Error:
Log Name: DFS Replication
Source: DFSR
Date: 2/6/2014 1:57:57 PM
Event ID: 1202
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Hxxx2.xxxxxxxxxxxxx.local
Description:
The DFS Replication service failed to contact domain controller to access configuration information. Replication is stopped. The service will try again during the next configuration polling cycle, which will occur in 60 minutes. This event can be caused
by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="DFSR" />
<EventID Qualifiers="49152">1202</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-06T19:57:57.000000000Z" />
<EventRecordID>194</EventRecordID>
<Channel>DFS Replication</Channel>
<Computer>Hxxx2.Hxxxxxxxxxxxxx.local</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>60</Data>
<Data>160</Data>
<Data>One or more arguments are not correct.</Data>
</EventData>
</Event>Hi,
Did you mean that you did not configure a DFS server in the new DC but you get the DFSR error 1202 in your event log? Then the issue is not related to the existing SBS domain.
Please try to turn off the Windows Firewall to check if it causes the issue. You could also refer to the articles below to troubleshoot the issue:
Newly Promoted Win2K8 DC is not advertising as Domain Controller.
http://blogs.technet.com/b/niraj_kumar/archive/2009/04/23/newly-promoted-win2k8-dc-is-not-advertising-as-domain-controller.aspx
Restrictions for Unauthenticated RPC Clients: The group policy that punches your domain in the face
https://blogs.technet.com/b/askds/archive/2011/04/08/restrictions-for-unauthenticated-rpc-clients-the-group-policy-that-punches-your-domain-in-the-face.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
i have a problem in buying zynga poker chips, every time i try to buy chips they tell me contacts itunes support and the the purchase always failed, i contacted zynga but they told me that i have to contact itunes because they don't know the problem ?
P.S i always use my credit money from gift cards to buy anything from itunes or in apps - purchasing.
so what do u think should i do ?Have you tried contacting iTunes support : http://www.apple.com/support/itunes/contact/ ?
-
Https ssl config Oracle AS, webcache, portal...almost works
Hi,
I have searched the forums and I havent found anything that works for me.
I have Oracle infrastructure on one server, and Oracle App server/portal on another server. I can get as far as the http server showing the "welcome to oracle" page in https form. When I try to access a page in the portal (plsql) I get a blank page. It does convert the "https://myserver:xxxx//pls/portal/url/page/IRWEB/HOME
" to "https://myserver:xxxx/portal/page?_pageid=73,86254,73_86264:73_86316:73_8632...." but nothing comes up.
Also, it uses the Infrastructure server for single-sign-on...so I need to make the app server do the single sign-on. I've tried by adding /pls/orasso entry in DADS.conf of http server..
So as far as I can tell...the http server IS operating in https/ssl, but the single-sign-on and the pages in the portal are not.
I have to do everything manually since I am using 10.1.2 (no Oracle Collab Suite installed, so no SSLConfigTool and other assistants)
Here is what I've done to get https://myserver:xxxx/ to come up ok.
server 1: Oracle Infrastructure and Oracle database release 1 10.1.2.0.0
server 2: Oracle Application Server / Portal with webcache release 2 10.1.2
using Oracle Wallet for certificate,
http server -> process management "ssl-enabled",
http server -> advanced -> ssl.config: SSLWallet file:, SSLWalletPassword, virtual host for ssl
webcache -> added settings for ssl (I used the current entries for non-ssl as a guide for the ssl entries)
Interesting issue...with the ports in the ssl.conf file example:
Port 4459
Listen 4459
VirtualHose myserver.blah.edu:4450
Port 4458
When I get the blank page trying to use ssl and 4459, I can manually change the url in my browser to 4458 (or maybe its the other way around) and get this message: "Error: The portlet could not be contacted"
Is this a problem with webcache? Do I have to do any ssl config on the server with the database?
I've even tried disabling the webcache, both with the oracle sql script and through web interface but neither made a difference...same problem.
Any help would be greatly appreciated..I feel as if I'm almost there.
If I did not post enough info for accurate help, please ask what you need to know to provide help! Thanks in advance.Hi,
Yes you can go for SSl configuration without re-installing any of the components.
Regards,
access_tammy -
[SOLVED] Firefox: failed to contact configuration server.
When I start firefox, the full error message is:
An error occurred while loading or saving configuration information for firefox. Some of your configuration settings may not work properly.
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /usr/bin/dbus-launch terminated abnormally with the following error: Failed to waitpid() for babysitter intermediate process: No child processes)
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /usr/bin/dbus-launch terminated abnormally with the following error: Failed to waitpid() for babysitter intermediate process: No child processes)
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /usr/bin/dbus-launch terminated abnormally with the following error: Failed to waitpid() for babysitter intermediate process: No child processes)
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /usr/bin/dbus-launch terminated abnormally with the following error: Failed to waitpid() for babysitter intermediate process: No child processes)
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /usr/bin/dbus-launch terminated abnormally with the following error: Failed to waitpid() for babysitter intermediate process: No child processes)
I don't have dbus or hal running, as I have disabled input-hotplugging. Is there any way to fix this?
Also, before I start firefox, I have 0 dbus processes running, and after it gives me that error message, I get:
pgrep dbus | wc -l
381
I have switched to chrome which doesn't seem to have any troubles. I would really like to have firefox though.
NVM: I went through the config options for firefox, and --disable-dbus exists
Last edited by tomd123 (2010-01-09 20:24:55)I'm not entirely sure, but here is what I would do:
1. Create a new user account and try to start firefox as that user.
2. are hal / dbus running (check with ps -ef |grep hal)
3. If 1. works and hal/dbus are running, log out and remove everything under /tmp owned by you , plus .dbus/session_bus/*. -
Security engine initialization failed. Contact your support representative. Error Code = 0x40000
I've seen a couple of other posts regarding this but no answers as of yet.
Stuck at BIOS/UEFI in a reboot loop. Top left shows Reset: 10Sec (and counts down). Lenovo logo and message:
Security engine initialization failed. Contact your support representative.
Error Code = 0x40000
I've tried the Power/Vol+ combo, tried tapping the Vol-, tried hitting F1 from an external keyboard, removed any memory cards, etc. Nothing seems to work. Is there some BIOS/UEFI update that can be done or a hardware reset to clear this? My 9 year old daughter doesn't care about a security engine, she just wants to play her games and watch videos.
Something else I noticed, the device will not power on unless it is plugged in. If I unplug it after I turn it on, it will continue to stay on (in the reboot loop). If I turn it off, I have to plug it back in before it will turn on again.
Please help!
Other posts:
http://forums.lenovo.com/t5/ThinkPad-slate-tablets/TT2-Boot-Error-0x40000/m-p/1485260#M28302
http://forums.lenovo.com/t5/ThinkPad-slate-tablets/Thinkpad-tablet-2-TPT2-cannot-boot-with-security-...Did you ever get this resolved? I have the same issue, and the warranty has expired. (My error code is 0xF00482, but otherwise symptoms are identical.)
-
I enter my redemption code and click activate but this error message keeps coming up."We're sorry. Something seems to be wrong on our end. Please try againlater. If this continues to fail, please contact Customer Support."
contact adobe support, https://helpx.adobe.com/contact.html
-
On Mac OS X 10.9.5
After downloading CC from http://www.tss.qld.edu.au/itdepartment/AdobeCreativeCloud.aspx
The .zip download is fine.
The installer runs but stops half way through (during "running scripts") and gives the error message in the pic below
The installation failed - The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
ANY HELP HUGELY APPRECIATED. I have know idea what to do
Thanks
SteveSince you did not download from Adobe, I don't think Adobe can help
When I clicked the link you provided, it LOOKS like your school has created custom install packages... so check there -
I am trying to download the InDesign CS5.5 update and keep getting "Update Failed" "Please contact your Administrator if you wish to apply updates on your machine". I have done this and now have Administrator rights, but I am still getting the message. How do I apply the update?
Direct Updates
https://www.adobe.com/downloads/updates/ -
I'm trying SSL thru the iMS 5.2
I've down a frish installation for the iMS 5.2
I'm facing this problem, when i start the messaging server i got this ERROR:
development # ./start-msg
/app/ims-thru-ssl: POP3 daemon process already running: 4043
/app/ims-thru-ssl: IMAP4 daemon process already running: 4057
/app/ims-thru-ssl: Starting HTTP daemon ...Cannot bind to port 80: Address already in use
ERROR: Failed to start HTTP daemon: /app/ims-thru-ssl/bin/msg/store/bin/mshttpd
Dispatcher already running
Starting ENS daemon
ERROR: The following services failed to start, or were already:
HTTP daemon
Could someone help me on this issue...Use netstat to see what's listening on port 80. Perhaps a web server or something?
It looks like you're trying to start a server that's partially running already, so you will want to check what processes are running, too -
I keep getting an error "failed to contact Store" in candy crush to purchase in itunes
I am on candy crush and trying to do a purchase through iTunes - and keep getting an error - failed to contact store" it was working fine and just started happening. Any suggestions?
Hello, melisbai.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
Cisco CSS as non-HTTPS SSL-traffic terminator
Hi!
Does anybody know is it real to use Cisco CSS as SSL-traffic terminator. I need to terminate non-HTTPS SSL-traffic on this device (i.e. SSL-encrypted sessions of any particular TCP-based application-layer protocol, not https)? If not, is there any CISCO device capable of doing such a job?
Regards, AmirHi!
Thank you very much for your reply.
I know about the S model - as per my post - but unfortunately I have realized after making the purchase.
Can you please help me with the following issue: my unit is not able to boot from FTP, even if I follow up the CISCO official documentation for that version (I issue all the commands as in the manual). More than that, if I setup the Primary Boot Configuration and then I want to check it up there is nothing in that field. The Secondary Boot Configuration keeps its settings and after the Primary failure it will try the Network Booting but with Failed status - returning me to the OffDM.
I mention that I am using the OffDM because the unit I bought has no Flash Card.
Also I am not sure how can I have a "network mounted filesystem" and in the meantime to use the FTP protocol; setting up a NFS server wont provide me with Windows style absolute path like k:/.... as per CISCO official guide. Is that a plain-ftp generically called as Network File System??? "First, create these subdirectories on the FTP server, then copy the files from the boot image to the subdirectories"
Is this linked with the fact that I am using a Linux box for my FTP Server? Can you please help me to understand what the following line from CISCO official guide means "A network boot is not supported on UNIX workstations"
Thank you! -
Unreserve funds failed. Contact Purchasing Administrator if necessary
Dear All:
When want to change the detail for one requsition in iProcurement, show the error"*unreserve funds failed. Contact Purchasing Administrator if necessary*". How can I solve the issue?
My environment is : Oracle R12.1.3 | Aix 6.1
Regards
TerryHi,
Could you please check what is the value set for the profile --> POR: Enable Check Funds..? set it as "*No checkfunds"* and try again to change the requisition.
You can check below URL for details :
http://forums.oracle.com/forums/thread.jspa?threadID=2179974&tstart=60
/S.P DASH -
Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?
Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another. -
HT3702 transcation failed please contact itunes...can u explain...why???
i cant purcase anyting..transcatoin failed.please contact iTunes..who can explain bout tis???...how long?
Contact iTunes support:
http://www.apple.com/support/itunes/contact/
Maybe you are looking for
-
I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?
I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?
-
We are in a process of transitioning our applications across to Oracle 8i (8.1.6) and part of this involves an older app using VB4.0 16 bit running through OO4O 2.2 and connecting to Oracle 7.3.4. Whilst the application connects and runs fine for the
-
I need the XML elements appear in different paragraphs ... Could do this with a script?
I need the XML elements appear in different paragraphs ... Could do this with a script? Thanks...
-
Firefox crashes when using Google as startpage
Firefox crashes and gives me a general error mesage that it had to close down for certain reasons. This only happens when I use Google as my startpage. If I use any other website as startpage all works well and I can go to Google from there and every
-
Does Adobe Captivate 7 or 8 support japanese characters in closed captions
Our Japanese team would like to translate the scripts we are using for our videos and have us apply the translation in the closed captions section. However, will Adobe 7 or 8 support Japanese Characters?