Failed in JMF diagnostics in netscape browser 7

I installed J2sdk 1.4.3 and jmf2.1.1e in Redhat Linux 7.3 and following their installation instruction to set up some environment variables. However I encountered two problems in configuring JMF.
One is that when I configured the jmf-2_1_1e-linux-i586.bin, some error messages came up as following,
java.lang.error: Can't open video card 1
....................................................................2
....................................................................3
.....................................................................9"
The second one is that after I run JMF diagnostics applet program to verify JMF installation. However, it failed with the following error message,
"Java1.1 compliant browser... Maybe
JMF classes.... Not Found"
I do not what is wrong with JMF installation. Does this failure come from uncompatible version between Java SDK and JMF, netscape browser or other things?
Thanks for your time to reply.

Did you set up the JMFHOME environment variable ?
That would account for the classes not found bit.
Not sure if you also need to set up ld.library.path... ( or something similarly named ).
I haven't done much on Linux, but very carefully read the install docs...
regards,
Owen

Similar Messages

Silent Install of JRE 1.4.1 fails to check IE and Netscape browser entries

I followed the Silent Installation web page article to install JRE 1.4.1. But strangely, while creating the response file and using custom install, the screen showing IE6 and Netscape6 browser plugin default checkmarks didn't show. I then installed the JRE using the response file following the article's directions. When I opened up the JRE Plugin in the Control Panel and went to the Browsers tab, both choices were not checked. Even using the -IExplorer and -Netscape6 parameters during install didn't make them checked. How do I do a silent automated install and have these browser choices checked and browser plugins installed?

go to tools\internet options\advanced\java vm etc.in IE
and check out the check boxes as appropriate may be it helps u

SSOException for Netscape browser but not IE

We are getting an SSOException (service URL not found: session) error when a user tries to log in using Netscape and they get bounced out with an invalid session message; however, the user is able to log in just fine if they are using Internet Explorer. After investigating the debug and log files, I can see that the problem is that when users log in with Netscape, the initial session id that is set with a cookie on the browser before the user authenticates is not being found by the Identity Server so it issues a new session id for the authenticated user. Therefore, I see a valid session for the user in the IS console, but the cookie stored in the Netscape browser has a different session id that is not valid (it was issued pre-authentication).
The Identity Server is not having a problem with Internet Explorer (the logs show that the initial session id that is issued is the one that it finds and uses after the user authenticates).
The Netscape browser is set to accept ALL cookies. In fact, when I configure the browser to warn me before accepting a cookie, I can see the initial cookie JSESSIONID being set on the Netscape browser.
The weird thing about this whole thing is that up until last week, this was working fine in both browsers with their current configurations. We did change some configurations in the Identity Server to use the LDAP across SSL but I don't see how that would affect the browsers and the Identity Server's ability to locate the cookie in each browser.
The only thing I can figure out from the debug files is that in the amAuth debug file, you can see where an initial session id is being set by a Netscape user, and after they hit the Login module, the session id is not found and a new one is issued. In IE, an initial session id is set and after the Login module, the initial session id is found and continues to be used. I cannot figure out why the Identity Server doesn't see the Netscape user's initial session id. I also cannot figure out what we could have changed that would cause this error to start happening only in the last week.
Does anyone have any ideas as to where I might look?

It sounds like you have malware on your computer. See [[Is my Firefox problem a result of malware#w_how-do-i-get-rid-of-malware|How do I get rid of malware]] for help.

Session Creation while using Netscape Browser

Why does a new Session not get created when a new instance of Netscape browser is opened?
My simple JSP is:
<html>
     <head>
          <title>Test Sesssion</title>
     </head>
     <body>
     Session Id = <%=session.getId()%>
<br>
     </body>
</html>
When I run this jsp from two instances of IE, I get two different Session Ids but when I run the jsp from two different instances of Netscape (4.75), I get the same session id. Is there any server side/client side setting to be done to get same session id??
regards
Ashok

Why does a new Session not get created when a new instance of Netscape browser is opened?
My simple JSP is:
<html>
     <head>
          <title>Test Sesssion</title>
     </head>
     <body>
     Session Id = <%=session.getId()%>
<br>
     </body>
</html>
When I run this jsp from two instances of IE, I get two different Session Ids but when I run the jsp from two different instances of Netscape (4.75), I get the same session id. Is there any server side/client side setting to be done to get different session id??
regards
Ashok

Jmf diagnostics applet

problem in jmf diagnostics applet
i installed jmf, also set the class path using windows environment variables utility
still i found problem
Message was edited by:
citymodel

no one can give hints why there is such problem

Signed Applet not running in netscape browser

<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 695 HEIGHT = 525 codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0">
<PARAM NAME = CODE VALUE = SignedAppletDemo >
<PARAM NAME = CODEBASE VALUE = "." >
<PARAM NAME = ARCHIVE VALUE = "SSignedApplet.jar" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.3" CODE = SignedAppletDemo CODEBASE = "." ARCHIVE = "SSignedApplet.jar" WIDTH = 695 HEIGHT = 525 scriptable=false pluginspage="http://java.sun.com/jpi/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>
what i wann that when i run this code in netscape browser that it won't ask the user to download the plugin for the applet it should automatically download plz do me favour and send me solution thanks

Hello.
Due to firewall issues I cannot state for certain if I am having a similar behaviour to yours. It appears that Netscape( 7.1 ) attempts to resolve to plugins.netscape.com irrespective of the pluginspage attribute ( if it resolves further I cannot see it due to firewalls ). IE appears to try and autoupdate ( based on the firewall challenges ).
You could try and provide a conditionally constructed link ( with information about the JRE failure ) to the JRE of choice between comment/embed/object elements. It is not the solution you asked for, but a potential alternative.
Regards,
James.

Cannot display the bitmap icon while we use Netscape browser

Hi
We deployed some .fmx on OAS4.0.6 and developer server 6, but the
forms downloaded by netscape browser 4.5 did not display bitmap
icon. On the contrary, everthing is ok when we utilize IE4.0.
How can I do for the netscape browser getting normal forms?
thanks
xiaowu
null

xiaowu (guest) wrote:
: Hi
: We deployed some .fmx on OAS4.0.6 and developer server 6, but
the
: forms downloaded by netscape browser 4.5 did not display
bitmap
: icon. On the contrary, everthing is ok when we utilize IE4.0.
: How can I do for the netscape browser getting normal forms?
: thanks
: xiaowu
On the web please use gif files and everything is fine. You can
find some of the standard icons in GIF format on <ORACLE_HOME>
\TOOLS\DEVDEM20\WEB
Frank
null

Netscape browser in SunBlade100

Hi,
I'm facing a problem by viewing my website in netscape, under SunBlade100, is that, I have 2 flash files in the main page of the website, and when it's loaded, the browser closed. I've taken out that 2 files from the main page, and the page can be loaded. But I've tried to put that 2 flash files in a single html page, it can also be loaded. and finally, the main page can be loaded after such experiment. I'm wondering why it's like that, and everytime I would need to do such experiment to get my page displayed? Please email ([email protected]) back to me if you know what's going on. A million thanks.

Ravi,
          I was having the same problem. It seems to be a problem with Netscape. I
          found that it was only Netscape running on the same machine as the server.
          When Netscape was running on a separate machine it was just as fast as ie.
          -Ben Litchfield
          "Ravi" <[email protected]> wrote in message
          news:[email protected]..
          > Hello
          >
          > Our application structure is Weblogic as application server and Iplanet
          > as webserver.We are using XSL and XML for the browser interface and
          > xalan and xerces are parsers respectively.When i run our application on
          > Netscape browser it is ver very slow and Internet explorer is very fast
          > why is it so.Is there any problem with netscape to use xsl
          > templates,even then i think for the browser there is way it concern with
          > xsl,cause it is already been parsed in to html.I am wondering why is it
          > so much difference between two browser.
          >
          > Can any body give an idea
          > Thanks in advance
          > Ravi
          >

How to force the Netscape browser to use Java Plug-in 1.3.0_02?

For Analyzer 6.2.1, how to force the Netscape browser to use Java Plug-in 1.3.0_02?

Change the classid in the object tag here is some info.This applies to JRE's 1.3.1 and greater.How do I know what Class ID to use for a specific JRE?CAFEEFAC-0013-0001-0004-ABCDEFFEDCBACAFEEFAC = This tells the browser to force a specific JRE0013-0001-0004 = JRE version number 1.3.1_04 (1.3.1_08 would be 0013-0001-0008)ABCDEFFEDCBA = Just needs to be there.1.3.0_02 = E19F9331-3110-11d4-991C-005004D3B3DB, it seems like they did not implement the standard until v.1.3.1Any good JRE Version = 8AD9C840-044E-11D1-B3E9-00805F499D93, this class id will just look for any good JRE.http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/version.html

Receiving parameter problem in Netscape browser

Hello, suppose a variable, street, has the value of
"1111 University Drive", and I pass this variable from
form A to form B by using the procedure call:
PORTAL30.wwa_app_module.set_target(....);
When I use a Netscape browser, form B will only receive "1111"
instead of "1111 University Drive". I know the problem exists
because of the blank spaces, but I don't know how can I fix it
so that form B will receive the correct value instead of the
partial value? This problem does not exist in Microsoft IE.
Does anyone have any suggestions? Thanks in advance.

Hi Nilan,
To get round this problem you need to substitute any spaces with
their hex representation. To fix them use PL/SQL command replace
e.g.
street becomes replace(street, ' ', '%20')
1111 University Drive will appear in the URL as 1111%20University%20Drive
both netscape and ie should interpret this correctly.

Applet - Oracle 8.0 database connectivity failing in Netscape Browser

I have written a Java Applet to connect to the Oracle (8.0) database. My Applet is residing in a remote server. The Applet connected to the database when run in Internet Explorer, but failed to connect to the database using Netscape Navigator (4.08) and resulted in the following error
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.get_column_index(Compiled Code)
at oracle.jdbc.driver.OracleResultSet.findColumn(Compiled Code)
at oracle.jdbc.driver.OracleResultSet.getInt(Compiled Code)
at EmpActivityApplet.getActivityData(Compiled Code)
at EmpActivityApplet.paint(Compiled Code)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Compiled Code)
* at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread$EventPump.dispatchEvents(Compiled Code)
at java.awt.EventDispatchThread.run(Compiled Code)
at netscape.applet.DerivedAppletFrame$AppletEventDispatchThread.run(Compiled Code)
I have zipped the my Java Applet program with the Oracle Thin Driver classes (EmpActivityApplet.zip) and coded the following HTML page to load the Applet:
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html;CHARSET=iso-8859-1">
<TITLE>untitled</TITLE>
</head>
<body>
<applet code="EmpActivityApplet" CODEBASE="." ARCHIVE="EmpActivityApplet.zip"
WIDTH = 1000
HEIGHT = 300>
</applet>
</body>
</html>
Please somebody help me in resolving this problem. This is urgent.
Please reply to [email protected]
Regards,
Raju.

Hi,
If ur Applet Needs to Access the System Resouces(JDBC API calls) u have to Make ur Applet trusted.U can Use the Keytool utility Bundled with JDK to Achecive this.The Actual Problem u may get is a Security Exception Due to which u cannot create a Connection Object which results in a Null Pointer Exception
thankx,
A.Md Abubacker

JMF Diagnostics applet - how to resolve "JMF Classes not found"

I am still having problems trying to get my USB camera to run in an applet.
I'm using Windows XP with IE 6.
I found the JMF Diagnostic Applet and when I run it, I get the following:
Java 1.1 compliant browser.....Maybe
JMF classes.....Not Found
The text below says that CLASSPATH needs to include jmf.jar
I have checked that and it does. I added all the jar files to the CLASSPATH as well and that did not help.
I saw another post that said the JMFHOME environment variable needed to be set to the main JMF directory.
I did that and still get the same error.
Can anyone tell me what I need to set in order to make the JMF Diagnostic applet work???
Thanks,

I have exactly the same problem. Running XP pro and Java 5. Installed JMF2.1.1e and the diagnostic doesn't work. Don't know how to verify or set the CLASSPATH but assumed it was more plug and play.
I'm a student and am writing my final year project which is supposed to be a multi-client concurrency based video clip app. All the sample codes I've seen make it look quite easy. I was wanting to prototype my concepts before I continue (glad there are some nifty buffer controls) I've unistalled, reinstalled, restarted an no joy and the only help that seems might work includes loads more files than what my distribution has (just have jmf.jar, customizer.jar, multiplayer,jar, mediaplayer.jar and sound.jar and that's it.
I was a little worred about the need to have the API on my test client machines (aka housemates) now I'm really worried.

How to force the Netscape Browser to open the "Open or Save" dialog box?

Hi, I tried to force the browser to open the "Open or Save" dailog box for downloading a file.
response.setContentType(context.getMimeType(file.getName()));
response.setHeader("Content-Disposition", "attachment; filename=\"" + file.getName() + "\"");
This works fine with IE for all file types( Even though he prompts twice to Open the file directly). but Netscape opens the file directly in the browser with showing any dialog box for text and html files. Anyone knows how to force the netscape in this case or for any file type? Any help will be appreciated.
Thanks

any one has the solution for this issue ? I tried the search and I didnt find any answer.
when your trying to open a pdf file as attachment is seperate window, it works well in IE but in netscape it opens up in the same browser, it doesnt open a seperate window
res.setContentType( "application/pdf" );
res.setHeader("Content-Disposition","attachment; filename=\"" + cofcFileName+"\"");

Diagnostics tool in browser

hi,
I have run the diagnostics tool in the browser, to check the performance of CRM.
Now I have the results, but I don't know whats good or bad ...
I've run the test, because sometimes opening forms or navigating in CRM is slow.
Could someone give short feedback on the results?
For example, "Javascript Dom Benchmark" is 98 ms. Is this good? bad? Could it be better?
I also have the detailed info if this is necessary.
Thanks!
Alexander

If you want a better perspective on performance, you might want to install Fiddler and see if you're waiting on things to load. That might help. Your JS numbers look fine. You're still less than 2/10s of a second for the JS to run in
that test, so that should be ok. Also, keep in mind that a CRM page could be a few MB to load. So that can impact the client performance as well. you can turn on compression in IIS to help with that, but keep in mind you're trading less data
over the wire for more CPU overhead on your IIS server. Still, generally a good trade.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Netscape browser give Java plugin detect JRE collision

hi
when i run my application on Netscape v8.0 i got a problem metioned in subject line. please help me for this.
thanx in advance

first uninstall all the previous JRE version.
Open Jav plug-in from control panel and select the java tab,
Select only one JRE version into this tab.
restart ur browser, perhaps u does not get this problem in future.

Failed in JMF diagnostics in netscape browser 7

Similar Messages

Maybe you are looking for