Failed sending message to end point

Hi,
I have an advanced adapter engine scenario. I get this error message on the Receiver file channel
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Tranmission failed. Reason: java.lang.NullPointerException:.
Why does this happen?
Cheers,
Earlence

File to File. AAE.
There is an adapter module that checks if the file size is zero. If so, it will add some default data to the payload.
The adapter logs show that this module has no errors.
The failure occurs when "trying to deliver to the endpoint" step occurs.
As far as I know, this is a framework step and has nothing to do with custom code.
Cheers,
Earlence

Similar Messages

Defining End point

Hi all,
I have a standalone XI 2.0 and my scenario is
file - XI - idoc (R/3)
i have the flat file in my XI box and im using inbound file adapter.
but i have a problem in defining the end point .
im getting an error message like
end point not defined for the sender system
my sender system is XI and my receiver system is R/3
im using file inbound adapter and idoc outbound adapter.
i have defined the end point for the receiver system as idoc.
wht will be my sender system endpoint .
if any has any idea pls help me.
thankx,
shree

Hi Shree,
Yes, it's true that in your case the flat file my in fact reside on the XI machine. However, from an XI point of view, you must still register the file adapter first within the SLD and then do the appropriate configuration within XI as Bjorn mentioned. Consider a situation where you may have a file to file scenario with XI performing transformation in the middle...in this case you need two "logical" systems here even though they are installed on the same physical box. One for the first file adapter instance and another for the second file adapter instance.
Good luck!!!
...Scottd

Solution: order delivery message for each end-point of many end-points

Hello,
Does anyone can help me find a solution to a problem I have.
Scenario: I have to develop a project with the OSB, and between the various services that I have to develop one have the following requirements.
I have a system that has multiple end-point (sub-systems; 1200 sub-systems), to whom I send a message (and only one), and these must be delivered in order (sequentially for each sub-system) .
These messages came from a JMS queue (could be topic).
Can anyone give some tips, how can I develop my components (proxy service) in order to ensure the delivery of messages in sequence for each sub-system without having to deploy multiple proxy service (one for each sub-system).
Thanks for any help.
Miguel

Hi Miguel,
Strange requirement but easy to implement. Create a XML which has all the end-points in it (you may create a simple structure line <EndpointList><Endpoint>EndPoint1</Endpoint><Endpoint>EndPoint2</Endpoint>.......</EndPointList>). Upload this xml as a X-Query resource in OSB. Use For each action in message flow (in request-response pipeline) and traverse on each and every EndPoint node in above created XML and from inside that use use publish/dynamic publish action.
Use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/tasks.html#wp1111432
Make sure that in the EndPointList XML you put the end-points in the sequence you want.
Regards,
Anuj

Get XML before sending to End Point

Hi All,
Can anyone give me an idea of how to get the actual XML in requestEnv. I want to save the XML before I send it to the web service end point so I can know exactly what I have sent for debugging reasons.
I have done a good bit of googling on this and have found that it seems to point to either Serialization or Marshalling. The problem I can see with serialization, although I admit I dont know much about it, is this not going to build XML based on the elements in Envelope, instead of being the exact XML that I am sending? .. although I see that it should technically always be the same.
I have tried all the obvious, envelope.toString() etc etc.
Thanks!,
Glenn
URL endpointURL = new URL(_endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "coreBio";
String targetNamespace = "http://identifyrequest.com";
Vector requestData = new Vector();
requestData.add(new Object[] {"MH", MH});
requestData.add(new Object[] {"MC", MC});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();

One way (but probably not the only one) would be to extend the class & add a toString() method that outputs the XML. That way you can just write the object to a log, console, etc. with minimum fuss.

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

3905 End-Point Maximum Reach Number error message

Dears,
I am Hisham Fawzy, I have an issue about that 3905 End-point, it can't be able to transfer internally & externally and this message appear when pressing Transfer button " Maximum Reach Number". I believe that firmware issue but i need to confirmation.
Note: Number of calls= 4 & Busy trigger= 2 in line configuration.
Thanks,
Hisham Fawzy

Never seem this error, although I have installed a few hundred of these 3905 phones.
Normally it is an issue with number of calls to low, but in your case it seems OK
So just upgrade, and see what is happeneing
Bye

[svn:bz-trunk] 19160: fix the regression of failed send out unsubscription message to the message client .

Revision: 19160
Revision: 19160
Author:   [email protected]
Date:     2010-12-08 11:31:26 -0800 (Wed, 08 Dec 2010)
Log Message:
fix the regression of failed send out unsubscription message to the message client.
Basically when the MessageClient is in shutting down stage (still valid) the shutdown procedure needs to push message back to the client still. It is a regression introduced by change 18858
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageClient.java
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

Hello,
Here is my 2 cents.
Oracle recommends you set the Oc4jCacheSize parameter to reduce the occurrences of MOD_OC4J_0087 and
related errors in your Apache error logs. To change this parameter, follow these steps:
1. Stop the OPMN processes on the middle tier.
2. On the middle-tier computer, open a terminal window and go to $ORACLE_HOME/Apache/Apache/conf.
3. Enter the following command:
cp mod_oc4j.conf mod_oc4j.conf.pre3604573
4. Edit the mod_oc4j.conf file by adding the following line after the </IfModule> line, but before the
Oc4Jmount /j2ee/* line:
Oc4jCacheSize 0
5. Start the OracleOPMN processes on the middle tier.
I would still suggest to analyze the stack trace further for exact issues.
Rgds,Ramesh

TS2755 Imessage is failing to send messages

I am trying to send message using my Iphone 4. Recently, I have installed new IOS7 and then new fix of IOS 7.0.2.. My Imessage application keep failing on sending message...
Regards,

A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
iOS7.0.3 will be available next week that resolves this issue.

I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

I am having problems sending messages.. Once I send it, it just beeps and says it failed to send and I have perfectly good service. Why is this happening??

Hello llm007!
That is quite a strange issue. What make & model phone do you have? When did this begin? Are you able to make & receive calls? You can troubleshoot this issue http://vz.to/12TLCsR on our website to get things working as quickly as possible.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

'Failed to send message' on 6303 using PC Suite

I recently got a 6303 and I get a 'Failed to send message' when I try and send a message using PC Suite. I think there is some configuration issue since I can't see any texts in my Inbox either.
I've looked at discussion boards and tried the following with no luck
1. Ensure phone firmware is up-to-date. It is Rm-443 v 8.90
2. Re-installed latest version of PC Suite (7.1.40.1) after running PC Suite Cleaner
3. Checked my message settings on the phone - can't see anything that would help
i've looked at Ovi Suite too and can't send texts using that either.
the phone sync's fine with Outlook. Any ideas on what I can try?

Hi,
It sounds more like a phone related issue to me

Skype call failed and not sending messages

As the subject says, me and some friends are unable to send messages or make calls this morning. Messages just have the spinning symbol on the right and calls just say call failed. This is on several machine spread around the UK. Any advice is appreciated.

It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

"sending message failed" error message on model 1...

Nokia model 1209
Original problem: “message sending failed”
After contacting my Service Provider (Virgin Mobile), I was told to check, and if necessary correct my Message Sender Number. I needed to find and check this in my Nokia 1209.
V.M. gave me the number that I should have.
Check the rest:
From the Nokia Careline:
“To locate the Message Center Number, kindly follow these steps:
1. Go to Menu
2. Select Messages
3. Select Message Settings
4. Select Sending Profile                   the following # 5 (SMS Center) I could not find
5. Select SMS Center
6. Select Message Center Number
We would love to hear the positive outcome.”
After a deep think here is how I got to the MCN:
1. Go to Menu
2. Select Messages
3. Select Message Settings
4. Select Sending Profile       --- found a series of items, incl. Profiles 1 thru to 4, I selected Profile 1:
5. Select Profile 1 > this gave me: "Message Centre Number" > Select > appeared my MCN !!!!
I noted that the MCN had somehow lost its last digit, which I then typed in, and: All fixed.
I could now again, as before, send messages.
Any explanatory comments would be appreciated.                                                            bluegrassbanjo
Attachments:
Attachment for Nokia Discussions.doc ‏26 KB

please post your troubleshooting information from the help menu. That is copy to clipboard and paste into a reply on the forum

I can not receive messages and i can't send messages also if someone rings me it, it rings at their end and then goes to voice mail but nothing at my end

i can not receive messages and i can't send messages also if someone rings me it, it rings at their end and then goes to voice mail but my phone doesn't ring

Talk to your carrier. Sounds like something is not provisioned right on your account.

Send Message Fails

When I try to send a message, a dialog appears that says "Status: Assembling message . . .", then after a few seconds, a Send Message Error dialog appears that says "Sending of message failed. Please verify that your Mail & Newsgroups account settings are correct and try again."
1. The "Status: Assembling message..." dialog never used to appear and the emails went out fine.
2. I have checked the account server settings and they ARE correct. I tested them and the server likes them. Error message fails to specify exact cause of failure, so it is of no help.
3. I removed my user account and recreated it. Same problem, except now my archives and inbox are empty. (Fortunately, I copied my Profile files to a backup location, so I suspect I may not have lost everything if I can figure out how to restore the data files and get TB to recognize the restored files.)
4. I uninstalled the program and reinstalled it. Same problem, didn't fix it.
5. I created a new account on a different server. Access codes test out properly. Same problem, doesn't send. My hairstyle looks terrible now after my pulling numerous patches of it out.
I have done everything except give up and go to another email program and try to import my data or just start over. Solution is probably simple, but so deep in the hidden guts of the program that I can't find it.
Where's the problem, and how do I correct it??

To diagnose your problems with Thunderbird, try he following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
In this case I would put money on it being the anti virus. The most troublesome at the moment is Avast, but they all block outgoing connections from Thunderbird at different times and disabling email scanning, or SPAM filters, or enabling access in the firewall component or a combination of all of the above can be required.
Safe mode identifies the probable source if things would as they should. It may also only be the account setup process the A/V messes up as well. Thunderbird makes many connection attempts when scanning for settings when they are not in the database (Or connection to the database is blocked by the Anti virus program) and the anti virus just does not faithfully report the results so you get silly error messages.

554 Transaction failed : Cannot send message due t...

Hello there
Had a problem with the above about a month ago and had remote techies on m y PC for several hours over two days trying to fix it. They said it was my PC but in the end it was a yahoo server problem. It's happened again! However, this time I can receive and send emails but not more than one recipient whereas last time I couldn't send at all.
I don't have the time or energy to do it all again but, because I work from home, not being able to send emails to several recipients at the same time is a right pain.
Does anyone from BT/Yahoo know how to fix this without by wasting a whole day with a techie?
Hoping someone can help.
Many thanks

Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
Its possible one of the forum members may be able to help you.
Please look at this thread http://community.bt.com/t5/Other-BB-Queries/Error-code-when-sending-Cannot-send-message-due-to-possi...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Failed sending message to end point

Similar Messages

Maybe you are looking for