Failed to compare two elements in the array

very often, I have the error "Failed to compare two elements in the array" in Exchange 2013 ECP. We are not running DAG. I google a bit but don't get a lot of result on this.
I was trying to track mail from a user who send to DL group. Since I can't do in in ECP , how can I do it in EMS?

I too have this issue. I'm not sure how wide spread. I know of one user who sends emails regularly to a DL named "All Users" which is a Security Group which we then add real users to and not just every mailbox. When he sends the emails,
from his perspective, everything is fine, meaning he gets to NDR or anything. Also, when he adds the Dl in Outlook To field and expands it, all the correct users are there. In fact, it tells him there are 203 addresses here. However, only
184 are actually getting the message. When I try the EAC to view the tracking report, it will show the message, but if I click on the edit button, I get "Failed to compare two elements in the array". If I try from EMC with search-messagetrackingreport
-identity "recipient address" -sender "sender address" -bypassdelegatechecking and the recipient address is the group, it says it could not be found. If I try with simply putting an email address of someone who is a member of that group, it says Warning:
An unexpected error has occured and a Watson dump is being generated. Failed to compare two elements in the array. I don't know what else to try. Anybody??

Similar Messages

I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order

I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order. Any ideas, I've been playing with the idea but have had no luck, is this even possible?

Hi,
Please check it out the attached Vi.. Is this you need?
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney
Attachments:
Event.vi ‏11 KB

Compare two members from the same dimension in HFR

Hi,
Is it possibe to compare two members from the same dimension in HFR? The requirement is to compare Year and Week members from the same dimension. The Week date will be selected from POV. The corresponding Year date should be displayed in the report. Week dates are in the format W2008-03-07 and Year dates are in YTD2008-03-07.
The dates are same except the preceding character.I am unable to compare these two. In my understanding there's no substring or replace functions in HFR.
Kindly help. Thanks in advance.
Regards,
Uma

Hi,
How is your database structured? it may be possible to use the 'RelativeMember' function if it will always be the same number of steps between the 'W' member and the 'YTD' member, e.g. if your hierarchy is something like:
Time
.Weeks
..W2008-03-07
..W2008-03-10 etc.. for 52 weeks
.YTD
..YTD2008-03-07
..YTD2008-03-10 etc.. for 52 weeks
In your report select 'Current Point of View for Time' in one row/column and in the other use:
RelativeMember set up as follows:
Member: Current Point of View for Time
Offset: 52
Hierarchy: Time
RelativeMemberList: Lev0, Time
UseFirstDescendant: leave unselected
Hope this helps
StuartGame
www.analitica.co.uk

Why i get different value when subtracting two elements of different arrays then the actual value in a timed loop

Hi Everyone
I have a probem in substracting the two elements of two different 1-D arrays. The problem is, I am taking out data from a CCD camera which gives me data in form of 2-D array. So i select 1-D array out of it. Now this CCD output is in a timed loop, hence i am getting data in each loop. I select a perticular array output of the CCD and this is then passed to shift register and in all the loops later on, one of the element of the output array of the CCD is substracted from the same indexed element of the selected array. For reference i have pasted the snap shot of the block diagram. In this snap shot you see three probes. The value at the prob 1 is 232, at probe 2 is 255 and at 3 is 4294967273, where as actually i sould have a value of -23 since i am substacting prob 1 and probe 2 values. Since the value of probe 2 will always remain at 255 as i have fixed it by choosing an array form CCD and i checked the value of probe 1 which never goes above 255 so why do i get this false value here.
Can you please help me in problem.
Regards
Chauhan
Attachments:
clip_image0011.gif ‏15 KB

Your data is U32 (unsigned integer) which does not have negative values. According to unsigned integer math, "negative" results will wrap.
You need to work in a datatype that is appropriate for what you want to do. How many significant bits do you have in the raw data?
Message Edited by altenbach on 03-17-2008 11:15 AM
LabVIEW Champion . Do more with less code and in less time .

Comparing an element of an array with the previous element in that array.

First post, please let me know if there's anything I should do differently.
I'm grabbing a scope measurement in the form of a triangle waveform, and want only the parts of it with a positive differential - essentially a sawtooth. The waveform is stored in a one-dimensional array. Also, there is no way for me to trigger the measurement, so there is likely an incomplete bit of waveform before the first lowest value.
To prepare the data I decided to do two things:
-Cycle through the array and delete everything until I find the first lowest value.
-Save the values from lowest to highest, then delete everything until the next lowest value. Do this n times.
Does anyone have any good examples of cycling through an array in such a manner, or is there simply an easier way of going about it?

Thank you very much for the response!
Unfortunately I don't have any code to post at the moment, but you can assume the input would be an array of voltage values that comprise a triangle wave. Good suggestion about the array min/max function, however I forsee a potential issue with it.
It's possible that the triangle wave won't be 'perfect.' That is, the voltage of one peak or valley might not be exactly identical as measured from one to the other. It would be really nice if I could count on them to be identical, then I could min/max and just search for the min and max values. If I min/max, it's possible I could come up with a point at the middle or end of my waveform and lose useful data before it. There are two likely scenarios for the start of the waveform, so...
-We start on the downward slope of the triangle wave somewhere in the middle of it.
if array[x+1] is less than array[x], delete array[x]. If it's not, exit the loop.
-We start on the upward slope of the triangle wave somewhere in the middle of it.
This one is tougher. I could use Min/Max and make the determination based on how close to the min value we are within some margin of error.
-We could start exactly on the peak or valley of the triangle, but this is very unlikely with the number of measurements taken.
Is there a min/max that would allow for some margin of error?

After an element in the array is removed, how to move the array up?

Hi,
My programs creates an array of strings. The user can choose to insert or delete a string. After a string has been deleted, I like to move the rest of the array up to fill up the space. For examples,
String[] before={"This", "is", "a", "test"};
After "a" is removed, instead of assign null to the space, I like to move "test" up so it becomes
String[] after={"This", "is", "test", null};
Can anyone help?
Thanks.

well i'm not doing your homework but the answer is three steps and two
loops
step one create a new array "after" one less than the size of your original "before".
step two loop through the elements of "before" up to the element
that was removed. add these elements to the "after" array.
step three loop through the elements of "before" starting at the
element after the one that was removed. add these elements to the
"after" array.
now when you get this done there is a better way to do this other than
loops. use System.arraycopy() you can see the api for that here...
http://java.sun.com/j2se/1.4/docs/api/java/lang/System.html

How to compare two elements?

Hi Brothers,
How can I compare two nodelements from different nodes if they have the same content?
I tried
boolean elementExists(IE_CustomerElement element){
       for (int i=0; i < wdContext.nodeChangedCustomerRows().size(); i++){
            if(element.equals(wdContext.nodeChangedCustomerRows().
                                currentChangedCustomerRowsElement())){
                 return true;
       return false;
But this doesn't work since element may be from a different node and thus is not equal to wdContext.nodeChangedCustomerRows().currentChangedCustomerRowsElement()
Both elements have the same attributes, though...
Any ideas? Thanks, Johannes

Johannes,
Object.equals method returns true only if both the arguments point to same object. So,
element.equals(wdContext.nodeChangedCustomerRows().currentChangedCustomerRowsElement()
will be true only if both element and nodeChangedCustomerRows().currentChangedCustomerRowsElement() refer to same object, which is not the case here.
You'll need to do attribute comparison to see if the elements are equal. Something like this might work for you.
boolean elementExists(IE_CustomerElement element)
       for (int i=0; i < wdContext.nodeChangedCustomerRows().size(); i++)
            if((element.Attribute1.equalsIgnoreCase(wdContext.nodeChangedCustomerRows().currentChangedCustomerRowsElement().Attribute1))&&
               (element.Attribute2.equalsIgnoreCase(wdContext.nodeChangedCustomerRows().currentChangedCustomerRowsElement().Attribute2))&&
               (element.Attribute3.equalsIgnoreCase(wdContext.nodeChangedCustomerRows().currentChangedCustomerRowsElement().Attribute3))
                      & so on....
                 return true;
       return false;
There might be better ways to do this, let me know if you come across one.
Hope this helps.
Vishwas.

Shall we compare two elements in a collection

Dear all,
shall we compare two scuccessive elements in a collection
i am creating a type.and i am dumping the data into that type using bulk collect.now i need to compare the data in type (previous value and current value).
please suggest
Thank you.
Suresh

899511 wrote:
Dear all,
shall we compare two scuccessive elements in a collection
i am creating a type.and i am dumping the data into that type using bulk collect.now i need to compare the data in type (previous value and current value).
please suggest
Thank you.
SureshDon't do it in a collection. Use SQL.
SQL provides Lead and Lag analytical function that allow you to compare next/previous values.
e.g.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/functions070.htm
Loading the data into a collection in memory to do something that can be easily achieved in SQL is just wrong and uses expensive PGA memory unnecessarily.

I am comparing two documents. The "Not Responding" event happens for over 30 minutes.

I am comparing two documents using FM 11 on Windows 7. The "Not Responding" event happens for over 30 minutes. When should I force the application to quit?

It sounds like your installation is corrupted. I don't know what two checkmarks you mean, but when the Setup Assistant starts it collects some personal information after which it will return you to your normal Desktop. If it isn't doing that, then something is not right.
I think you will need to shut down the computer, then reboot. If you are able to reboot, then check About This Mac under the pple menu to see what version of OS X it shows is installed. If it shows 10.9.x then do the following:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

How can I compare two collections at the same time? (View two grid views)

I have two collections containing some of the same images. (My Nikon D70 did not put an end-of-file on some images. I recovered them into a different collection.) Now I want to display both collections side-by-side in grid view. I will select those images in the "recovered" collection that correspond to the bad images in the "main" collection, add the ratings etc, and move just these to another collection.
It is extremely frustrating to have to bounce back and forth between collections, remembering each image one by one and selecting it in the "recovered" collection. (The image names are not preserved in the "recovered" collection -- I have to go by what the image looks like.)
LightRoom allows me to compare photos in the compare view. I want to compare collections in two grid views.

CaptureTheLight,
you have ran into a situation when you have to compare two sets of images and now you're wondering how come Lightroom doesn't have such "obviously necessary" functionality? But you have to admit it, this is not such a common situation in a photographer's workflow recovers broken files and tries to compare them against themselves. I think it's a pretty specific feature you need. Still, Lightroom has enough powerful tools for editing and sorting images.
For example...
You could just put them all - "main" and "recovered" - into a single collection or into the Quick Collection. Label the entire "recovered" collection with, say, red and sort by capture time. Now you'll have everything side by side, ordered chronologically. The "recovered" images will stay next to the "main" images since their capture time will be the same, and they will also stand out since they have the red label.
Make the thumbnails bigger and set up the grid view so it tints the thumbnail cell are tinted with the label color. Now, you can go quickly through them visually checking labeled vs unlabeled.

Compare two strings in an array

Hello!
Please feel free to give me hints, but do not give me any code.
Ok, here is what I am trying to do, I whant to compare my input string whith strings allready stored in the array. If my input string equals any of the allready excisting strings, a error wil show upp, otherwise store the new string in next avalibal position. I do not seem to get the method right for comparing the strings. here is the method I have written so far, please take a look and give me a hint, but no code. :)
//Check if a user already excists
public void compareNames (People in_array [], String in_name) {
          for (int i=0; i<value.peopleCount; i++) {
               if (in_name.equals(in_array.getPeople())) {
               System.out.print("The user already excist, please chose another name");
}value.peopleCount is an global count value for people arays.
getPeople get the name from the people class.
Martin

A couple notes here.
The name compareNames() is misleading if it is going to do what you described. A comparison will generally not have side-effects like outputting error messages to the console or adding new items to an array. It would be better if you called the method addIfNew(), and returned a boolean indicating whether the name was new or not. The caller would then be responsible for displaying an error message if the method returned false.
I also suggest you use a List such as ArrayList instead of an array, otherwise you will have to resize and copy your array every time you add something to it that exceeds the array size, and will allow you to do away with the global peopleCount.

Compare two results from the same table

i have two results from the same table that i would like to compare. below is my query and the results i want to compare
SELECT tblItemRoutingBOM.ItemRevID, tblItem.ItemID, tblItem.PartNum, tblItem.ItemName, tblItem.ManufacturerPartNum AS [Mfg Part#], tblItemRoutingBOM.Quantity
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
WHERE tblItemRoutingBOM.ItemRevID in (61,70)
as you can see i am returning two records using the where clause
ItemRevID, ItemID, PartNum, ItemName, Manufacturer, Mfg Part#, Quantity
61,121,331503,.233 Aluminum Sheet,,1
70,121,331503,.233 Aluminum Sheet,,3
now what i am looking for is to combine these two together into one row with the following added. two columns for each QTY, QTY1 = 1 and QTY2 = 3 with a third column added that is the difference between the two QTY Diff = 2
Any thoughts?

Here are the two statements that i want to combine, results for each are attached
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS SumOfQuantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=61
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS Quantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=70
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
114,11,55002,Pepsi Blue Cap,NULL,
117,5,331501,Marigold Yellow For ABS,NULL,
121,1,331503,.233 Aluminum Sheet,NULL,
125,2,331504,Velvet Vinyl .008,NULL,
114,33,55002,Pepsi Blue Cap,NULL,
117,15,331501,Marigold Yellow For ABS,NULL,
121,3,331503,.233 Aluminum Sheet,NULL,
125,6,331504,Velvet Vinyl .008,NULL,
my returned result should combine above with two extra columns (two extra columns because i have two results to combine)
114, 11, 33, 22, 55002, Pepsi Blue Cap, NULL,
117, 5, 15, 10, 331501, Marigold Yellow For ABS, NULL
121,1, 3, 2, 331503, .233 Aluminum Sheet, NULL
125, 2, 6, 4, 331504, Velvet Vinyl .008, NULL
Columns go as such, ID, QTY1 (for 61), QTY2 (for 70), Diff (QTY1-QTY2), PartNum, ItemName, Mfg, Mfg Part#
IF the results from one of those two are empty then i would see something like this
114, 11, 0, 11, 55002, Pepsi Blue Cap, NULL,
117, 5, 0, 5, 331501, Marigold Yellow For ABS, NULL
121,1, 0, 1, 331503, .233 Aluminum Sheet, NULL
125, 2, 0, 2, 331504, Velvet Vinyl .008, NULL

Enable the Number of Elements in the Array

once the Un-Initializing the array(1D or Multi) Placed ,we can not select the Number of element to Enable.
byproviding the below option we can easily Enable the Elements in any array dimention.

Already possible by typing a value (usually the default value) once you've set the indices to the size you want to initialize

Compare two strings and the save the greater

To devolop a vi,it can compare two strings.A string is gived,the other is saved previously.If greater,then save,or do nothing.

Hi,
I am assuming by "greater" you mean the string length.
Use the string length function from the strings palette, with shift-registers on a while loop. Write to the shift-register the "greater" string.
I am attaching a diagram screenshot for this. NOTE: depending on how you want this VI to run, you can move the input and output string control and indicator inside our outside the while loop.
Hope this is what you were looking for.
Khalid
Attachments:
strlen.gif ‏17 KB

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

Failed to compare two elements in the array

Similar Messages

Maybe you are looking for