"Failed to convert to native blob" error

Can someone else me? Whenever I go into the slideshow module, I get the error "failed to convert to native blog" Any suggestions?

Success! I have been having this issue with the slideshow module for over a year. The issue was that I had an old identity plate that was trying to use a font that I no longer have installed. I opened the identity plate and updated it to use a font that I have currently. Now I can finally use the slideshow module again! Adobe - if you are listening - it would be nice to have a more descriptive error message when this happens, or to alert the user when lightroom starts that the font is now missing and will be replaced or similar. Thanks all!

Similar Messages

Wm_Valid: Fail to convert to internal representation error while inserting

Hi,
I'm trying to execute an insert via XmlCommand. The table is created with this statement:
create table testtable4 (testtable4_pk number, mydate date, myts timestamp with time zone, wm_valid wm_period);
I have a problem while inserting on a simple table with wm_period field. The c# code is the following:
OracleConnection oraConnection;
OracleCommand insertCommand;
string[] KeyColumnsList = null;
string[] UpdateColumnsList = null;
string xml1 = "<?xml version=\"1.0\"?>\n" +
"<ROWSET>\n" +
"<MYROW num = \"1\">\n" +
"<TESTTABLE4_PK>1</TESTTABLE4_PK><MYDATE>2012-01-20T00:00:00.00000</MYDATE><MYTS>01-01-11T00:00:00.000000000 +00:00</MYTS>" +
"</MYROW>\n" +
"</ROWSET>\n";
string xml2 = "<?xml version=\"1.0\"?>\n" +
"<ROWSET>\n" +
"<MYROW num = \"2\">\n" +
"<TESTTABLE4_PK>2</TESTTABLE4_PK><MYDATE>2012-01-20T00:00:00.00000</MYDATE><MYTS>01-01-11T00:00:00.000000000 +00:00</MYTS><WM_VALID><VALIDFROM>01-01-11T00:00:00.000000000 +00:00</VALIDFROM></WM_VALID>" +
"</MYROW>\n" +
"</ROWSET>\n";
KeyColumnsList = new string[1];
KeyColumnsList[0] = "TESTTABLE4_PK";
UpdateColumnsList = new string[4];
UpdateColumnsList[0] = "TESTTABLE4_PK";
UpdateColumnsList[1] = "MYDATE";
UpdateColumnsList[2] = "MYTS";
UpdateColumnsList[3] = "WM_VALID";
try
string ConnString = "Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=" + host + ")(PORT=" + port + ")))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=" + sid + ")));User Id=" + username + ";Password=" + password + ";";
oraConnection = new OracleConnection(ConnString);
oraConnection.Open();
using (OracleCommand cmd = new OracleCommand())
cmd.Connection = oraConnection;
cmd.CommandText = "alter session set NLS_DATE_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SS.SSSSS'";
cmd.ExecuteNonQuery();
cmd.CommandText = "alter session set NLS_TIMESTAMP_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SS.SSSSS'";
cmd.ExecuteNonQuery();
cmd.CommandText = "alter session set NLS_TIMESTAMP_TZ_FORMAT = 'YYYY-MM-DD\"T\"HH24:MI:SSXFF TZH:TZM'";
cmd.ExecuteNonQuery();
insertCommand = new OracleCommand();
insertCommand.Connection = oraConnection;
insertCommand.XmlCommandType = OracleXmlCommandType.Insert;
insertCommand.XmlSaveProperties.KeyColumnsList = KeyColumnsList;
insertCommand.XmlSaveProperties.RowTag = "MYROW";
insertCommand.XmlSaveProperties.Table = "TESTTABLE4";
insertCommand.XmlSaveProperties.UpdateColumnsList = UpdateColumnsList;
insertCommand.XmlSaveProperties.Xslt = null;
insertCommand.XmlSaveProperties.XsltParams = null;
//this works
insertCommand.CommandText = xml1;
insertCommand.ExecuteNonQuery();
//this fails
insertCommand.CommandText = xml2;
insertCommand.ExecuteNonQuery();
insertCommand.Dispose();
oraConnection.Close();
oraConnection.Dispose();
catch (Exception err)
this.WriteLogErr("ERROR: " + err.Message);
With the first ExecuteNonQuery I attempt an insert of a data value and a timestamp with timezone value. The execution is ok (xml1).
When the second ExecuteNonQuery is run (with the value of wm_valid), the execution fails with this error:
ERROR: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: 'java.sql.SQLException: Fail to convert to internal representation: 01-01-11T00:00:00.000000000 +00:00' encountered during processing ROW element 0. All prior XML row changes were rolled back. in the XML document.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 111
ORA-06512: at line 1
The stored procedure at row 111 calls this Java method:
oracle.xml.sql.dml.OracleXMLStaticSave.insertXML(int, java.lang.String) return int
The structure of complex data type wm_period is:
CREATE OR REPLACE TYPE wm_period AS OBJECT (
validfrom TIMESTAMP WITH TIME ZONE,
validtill TIMESTAMP WITH TIME ZONE);
The problem is: I am able to insert a timestamp with timezone value (myts) but I'm not able to insert a wm_valid that contains two values of the same type...
This works: <MYTS>2011-01-01T00:00:00.00000</MYTS>
This fails: <WM_VALID><VALIDFROM>2011-01-01T00:00:00.00000</VALIDFROM></WM_VALID>
I also tried to change the format of NLS_TIMESTAMP_TZ_FORMAT with a lot of various setup, but nothing changed.
Thanks in advance for your precious help.
Best Regards,
Mario.

Hi jschell ...thnx for ur reply......
the getString(2) parameter is just avarchar which
return the error from the procedure, if its ok,then
the query is executed properly..its just a check I've
kept to jump into the next step.If the status is OK,
then I'm retrieving the values from the cursor. I'm
getting right value for this parameter.I wasn't questioning the logic. I understand what you are doing.
However JDBC drivers can have problems when items are retrieved out of order.
You might also try switching driver types. If the thin works and oci doesn't (or visa-versa) then you know it is a driver problem and you will just have to try a work around.

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO AS T0 LEFT OUTER JOIN
                      VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
     OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO T0 LEFT OUTER JOIN
                      VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
     OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

Error "Conversion failed when converting date and/or time from character string" to execute one query in sql 2008 r2, run ok in 2005.

I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
END

You can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site

SSRS error "Conversion failed when converting the nvarchar value"

Hi folks!
After SCCM 2012 R2 upgrade, we have errors with self made reports:
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset DataSet2. (rsErrorReadingNextDataRow)
Conversion failed when converting the nvarchar value '*****' to data type int.
I found several articles to see reporting services log file for possible WMI related errors, but none exists. SQL server is 2008R2, Runned mofcomp, and re-installed reporting services role, but problem remains.
I traced the dataset2 query:
SELECT
v_Collection_Alias.CollectionID ,v_Collection_Alias.Name
FROM fn_rbac_Collection(@UserSIDs) v_Collection_Alias
WHERE
v_Collection_Alias.CollectionType = 2
Any adwice is appreciated.
~Tuomas.

Hi Tuomas,
What's the SQL Server version? To verify the the SQL Server version, please see
http://support.microsoft.com/kb/321185
SCCM 2012 R2 need SQL Server 2008 R2 SP1 with CU 6 or SQL Server 2008 R2 with SP2 (http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLSrvReq).
If the SQL meets requirement, I would suggest you submit a thread to SQL forum to deal with the sql issue.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ActionScript 3.0: Error #1034: Type Coercion failed: cannot convert displayObject$ to DefaultPackage

I'm a student I have a final project want to deliver it after two days.
I'm making a drag and drop game, I watched a tutorial to do that.
But after ending coding I faced a weird error!
I've I checked that my code is the same as the code in the tutorial.
This is the Debug error report:
    Attempting to launch and connect to Player using URL E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf
    [SWF] E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf - 87403 bytes after decompression
    TypeError: Error #1034: Type Coercion failed: cannot convert paper1$ to DragDrop.
              at Targets()[E:\FL\ActionScript\Drag and Drop Project\Targets.as:23]
My `.fla` File is containing 12 Objects to drag and another 12 Objects to drop on it.
The idea here is when drop the Object on the target the Object will become invisible and the target become visible (in `.fla` file `target alpha = 0`).
I made two classes:
DragDrop.as : for the objects that I'm going to drag.
Targets.as : for the targets that I'm going to drop Objects on it.
Note: match function is to animate "GameOver" MovieClip When complete the game.
DragDrop.as:
    package
              import flash.display.*;
              import flash.events.*;
              public class DragDrop extends Sprite
                        var origX:Number;
                        var origY:Number;
                        var target:DisplayObject;
                        public function DragDrop()
                                  // constructor code
                                  origX = x;
                                  origY = y;
                                  addEventListener(MouseEvent.MOUSE_DOWN, drag);
                                  buttonMode = true;
                        function drag(evt:MouseEvent):void
                                  stage.addEventListener(MouseEvent.MOUSE_UP, drop);
                                  startDrag();
                                  parent.addChild(this);
                        function drop(evt:MouseEvent):void
                                  stage.removeEventListener(MouseEvent.MOUSE_UP, drop);
                                  stopDrag();
                                  if(hitTestObject(target))
                                            visible = false;
                                            target.alpha = 1;
                                            Object(parent).match();
                                  x = origX;
                                  y = origY;
Targets.as:
    package
              import flash.display.*;
              import flash.events.*;
              public class Targets extends MovieClip
                        var dragdrops:Array;
                        var numOfMatches:uint = 0;
                        var speed:Number = 25;
                        public function Targets()
                                  // constructor code
                                  dragdrops = [paper1,paper2,paper3,paper4,paper5,paper6,
                                                                 paper7,paper8,paper9,paper10,paper11,paper12,];
                                  var currentObject:DragDrop;
                                  for(var i:uint = 0; i < dragdrops.length; i++)
                                            currentObject = dragdrops[i];
                                            currentObject.target = getChildByName(currentObject.name + "_target");
                        public function match():void
                                  numOfMatches++;
                                  if(numOfMatches == dragdrops.length)
                                            win.addEventListener(Event.ENTER_FRAME, winGame);
                        function winGame(event:Event):void
                                  win.y -= speed;
                                  if(win.y <= 0)
                                            win.y = 0;
                                            win.removeEventListener(Event.ENTER_FRAME, winGame);
                                            win.addEventListener(MouseEvent.CLICK, clickWin);
                        function clickWin(event:MouseEvent):void
                                  win.removeEventListener(MouseEvent.CLICK, clickWin);
                                  win.addEventListener(Event.ENTER_FRAME, animateDown);
                                  var currentObject:DragDrop;
                                  for(var i:uint = 0; i < dragdrops.length; i++)
                                            currentObject = dragdrops[i];
                                            getChildByName(currentObject.name + "_target").alpha = 0;
                                            currentObject.visible = true;
                                  numOfMatches = 0;
                                  addChild(win);
                        function animateDown(event:Event):void
                                  win.y += speed;
                                  if(win.y >= stage.stageHeight)
                                            win.y = stage.stageHeight;
                                            win.removeEventListener(Event.ENTER_FRAME, animateDown);
...Thanks

Thank you very much for replying.
- dragdrops represents: the dragable objects.
- Targets obtaining the dropable objects by hitTestObject, then the dropable objects visible is turned to false, & the target visible turned to true.
Dragable objects is a 12 elements all of them have an instance names: paper1....paper12.
When I focused to the project I noticed that I forget to give the dragable objects an instance names!
after making the instance names to them, a new error occures:
E:\FL\ActionScript\Drag and Drop Project\Targets.as, Line 11
1046: Type was not found or was not a compile-time constant: paper1.
This error is continuing to paper2, paper3.....paper12 !
Please download my project, I must deliver it to my college in 24/12. I will never forget your favor. thanks.
https://www.dropbox.com/s/8mdg5w17vvryzso/Drag%20and%20Drop%20Project.rar | 715KB

Conversion failed when converting the varchar value to data type int error

Hi, I am working on a report which is off of survey information and I am using dynamic pivot on multiple columns.
I have questions like Did you use this parking tag for more than 250 hours? If yes specify number of hours.
and the answers could be No, 302, 279, No and so on....
All these answers are of varchar datatype and all this data comes from a partner application where we consume this data for internal reporting.
When I am doing dynamic pivot I get the below error.
Error: Conversion failed when converting the varchar value 'No' to data type int.
Query
DECLARE @Cols1 VARCHAR(MAX), @Cols0 VARCHAR(MAX), @Total VARCHAR(MAX), @SQL VARCHAR(MAX)
SELECT @Cols1 = STUFF((SELECT ', ' + QUOTENAME(Question) FROM Question GROUP BY Question FOR XML PATH('')),1,2,'')
SELECT @Cols0 = (SELECT ', COALESCE(' + QUOTENAME(Question) + ',0) as ' + QUOTENAME(Question) FROM Question GROUP BY Question FOR XML PATH(''))
SET @SQL = 'SELECT QID, QNAME' + @Cols0 + '
FROM (SELECT QID, QNAME, ANSWERS, Question
FROM Question) T
PIVOT (MAX(ANSWERS) FOR Question IN ('+@Cols1+')) AS P'
EXECUTE (@SQL)
I am using SQL Server 2008 R2.
Please guide me to resolve this.
Thanks in advance..........
Ione

create table questions (QID int, QNAME varchar(50), ANSWERS varchar(500), Question varchar(50))
Insert into questions values(1,'a','b','c'), (2,'a2','b2','c2')
DECLARE @Cols1 VARCHAR(MAX), @Cols0 VARCHAR(MAX), @Total VARCHAR(MAX), @SQL VARCHAR(MAX)
SELECT @Cols1 = STUFF((SELECT ', ' + QUOTENAME(Question) FROM Questions GROUP BY Question FOR XML PATH('')),1,2,'')
SELECT @Cols0 = (SELECT ', COALESCE(' + QUOTENAME(Question) + ',''0'') as ' + QUOTENAME(Question) FROM Questions GROUP BY Question FOR XML PATH(''))
SET @SQL = 'SELECT QID, QNAME' + @Cols0 + '
FROM (SELECT QID, QNAME, ANSWERS, Question
FROM Questions) T
PIVOT (MAX(ANSWERS) FOR Question IN ('+@Cols1+')) AS P'
EXECUTE (@SQL)
drop table questions

Error Code:9 Failed to connect to Native Directory

Hello everyone
I am getting this kind of error "Error Code:9 Failed to connect to Native Directory" while I am trying to open shared services console. I am not even able to open the EPM System Configurator. Please provide me some suggestions on this. Also my configtool_err log is as follows
com.hyperion.cis.config.Configurator, ERROR, Error:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.hyperion.cis.config.Configurator.loadProductDBConfigurators(Configurator.java:210)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:205)
     at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryExit(WizardFormAdapterPanel.java:95)
     at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
     at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(SwingWizardUI.java:1693)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.notifyListeners(SwingWizardUI.java:1899)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.actionPerformed(SwingWizardUI.java:1894)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:5517)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3984)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NullPointerException
     at com.hyperion.foundation.config.FoundationDbConfigurator.isHubInstalled(FoundationDbConfigurator.java:133)
     at com.hyperion.foundation.config.FoundationDbConfigurator.<init>(FoundationDbConfigurator.java:38)
     ... 36 more
Thanks in advance
Sampath
Edited by: 929559 on Apr 23, 2012 7:36 AM

Hi,
Are you trying to login with the Native Admin user ? which URL you are using to login to Shared Services ?

Not converting anything but get error: "Conversion failed converting varchar value 'X' to data type int"

I have created the following trigger that fires instead of an UPDATE statement and copies the altered data over to an Audit table before proceeding with the requested UPDATE. After doing so, I wrote a simple UPDATE statement for testing:
UPDATE Products
SET ProductCode = 'XYZ 2014', ProductName = 'Special Edition Tamborine', ListPrice = 74.99, DiscountPercent = .5
WHERE ProductID = 28;
When I run this, I get the following message:
Msg 245, Level 16, State 1, Procedure Products_UPDATE, Line 14
Conversion failed when converting the varchar value 'X' to data type int.
Here is my trigger:
IF OBJECT_ID('Products_UPDATE') IS NOT NULL
DROP TRIGGER Products_UPDATE; -- LINE 14
GO
CREATE TRIGGER Products_UPDATE
ON Products
INSTEAD OF UPDATE
AS
DECLARE @ProductID int, @CategoryID int, @ProductCode varchar, @ProductName varchar,
@Description varchar, @ListPrice money, @DiscountPercent money, @DateUpdated datetime
BEGIN
SELECT @ProductID = ProductID, @CategoryID = CategoryID, @ProductCode = ProductCode,
@ProductName = ProductName, @Description = Description, @ListPrice = ListPrice,
@DiscountPercent = DiscountPercent, @DateUpdated = GetDate()
FROM deleted;
INSERT INTO ProductsAudit
VALUES (@ProductCode, @CategoryID, @ProductCode, @ProductName, @ListPrice,
@DiscountPercent, @DateUpdated);
SELECT @ProductID = ProductID, @CategoryID = CategoryID, @ProductCode = ProductCode,
@ProductName = ProductName, @Description = Description, @ListPrice = ListPrice,
@DiscountPercent = DiscountPercent, @DateUpdated = GetDate()
FROM inserted;
UPDATE Products
SET CategoryID = @CategoryID, ProductCode = @ProductCode,
ProductName = @ProductName, Description = @Description,
ListPrice = @ListPrice, DiscountPercent = @DiscountPercent
WHERE ProductID = (SELECT ProductID FROM inserted)
END
I am confused a bit by (1) the location of the error and (2) the reason. I have looked over my defined data types and they all match.
Could someone offer a second set of eyes on the above and perhaps guide me towards a solution?
Thank you.

This is an issue in this trigger. It will work for single record updates alone. Also for your requirement you dont need a INSTEAD OF TRIGGER at all.
You just need this
IF OBJECT_ID('Products_UPDATE') IS NOT NULL
DROP TRIGGER Products_UPDATE;
GO
CREATE TRIGGER Products_UPDATE
ON Products
AFTER UPDATE
AS
BEGIN
INSERT INTO ProductsAudit
SELECT ProductID,
CategoryID,
ProductCode,
ProductName,
ListPrice,
DiscountPercent,
GetDate()
FROM deleted;
END
Now, in your original posted code there was a typo ie you repeated the column ProductCode twice
I think one should be ProductID which is why you got error due to data mismatch (ProductID is int and ProductName is varchar)
see below modified version of your original code
IF OBJECT_ID('Products_UPDATE') IS NOT NULL
DROP TRIGGER Products_UPDATE; -- LINE 14
GO
CREATE TRIGGER Products_UPDATE
ON Products
INSTEAD OF UPDATE
AS
DECLARE @ProductID int, @CategoryID int, @ProductCode varchar, @ProductName varchar,
@Description varchar, @ListPrice money, @DiscountPercent money, @DateUpdated datetime
BEGIN
SELECT @ProductID = ProductID, @CategoryID = CategoryID, @ProductCode = ProductCode,
@ProductName = ProductName, @Description = Description, @ListPrice = ListPrice,
@DiscountPercent = DiscountPercent, @DateUpdated = GetDate()
FROM deleted;
INSERT INTO ProductsAudit
VALUES (@ProductID, @CategoryID, @ProductCode, @ProductName, @ListPrice,
@DiscountPercent, @DateUpdated);
SELECT @ProductID = ProductID, @CategoryID = CategoryID, @ProductCode = ProductCode,
@ProductName = ProductName, @Description = Description, @ListPrice = ListPrice,
@DiscountPercent = DiscountPercent, @DateUpdated = GetDate()
FROM inserted;
UPDATE Products
SET CategoryID = @CategoryID, ProductCode = @ProductCode,
ProductName = @ProductName, Description = @Description,
ListPrice = @ListPrice, DiscountPercent = @DiscountPercent
WHERE ProductID = (SELECT ProductID FROM inserted)
END
I would prefer doing it as former way though
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SOS: XAML binding Error: Converter failed to convert value of type '...' to to type '...'

Hi, I'm working on a small Windows store App project using C# + XAML, and encountered a really weird problem with data binding in XAML. The error message is:
Error: Converter failed to convert value of type 'Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' to type
'ProgressableBase'; BindingExpression: Path='' DataItem='Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'; target element is 'MyControls.ProgressableViewControl' (Name='root'); target property is 'Progressable'
(type 'ProgressableBase').
Error: Converter failed to convert value of type 'Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' to type
'IMatchWrapper'; BindingExpression: Path='' DataItem='Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'; target element is 'MyControls.MatchScoreControl' (Name='root'); target property is 'Match' (type 'IMatchWrapper').
the XAML code snippet involved is:
<local:MatchScoreControl Match="{Binding Converter={StaticResource TestConverter}}" />
here:
1) The type of the 'Match' property of 'MatchScoreControl' is 'IMatchWrapper', the type of the DataContext is 'MyMatch'；
2) 'MyMatch' is derived from 'ProgressableBase' and implemented
'IMatchWrapper'；
3) below is the definition of 'MatchScoreControl' and its dependency property 'Match':
public sealed partial class MatchScoreControl : UserControl
public IMatchWrapper Match
get { return (IMatchWrapper)GetValue(MatchProperty); }
set { SetValue(MatchProperty, value); }
public static readonly DependencyProperty MatchProperty =
DependencyProperty.Register("Match", typeof(IMatchWrapper), typeof(MatchScoreControl), new PropertyMetadata(null, OnMatchPropertyChanged));
private static void OnMatchPropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
// this line will never get called
Debug.WriteLine(e.NewValue.GetType().FullName);
} //more code...
4) TestConverter is a dummy value converter(IValueConverter) which does nothing just to make sure the binding object and target type is as expected:
public sealed class TestConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
if (targetType != typeof(IMatchWrapper))
throw new NotImplementedException("Error: targetType is not IMatchWrapper.....");
if (!(value is IMatchWrapper))
throw new NotImplementedException("Error: value is not IMatchWrapper...");
return (IMatchWrapper)value;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
When I run the app, none of the two exceptions in the TestConverter.Convert() is thrown, which is right and as expected. But the out window keeps throwing the error message as above. This is pretty weird!
I've tried adding a parameterless constructor to the class 'MyMatch', but it doesn't work.
Any suggestion would be appreciated!

Good to know you have the solution and thanks for sharing the experience.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

I can't install gem pg:
Gem::Ext::BuildError: ERROR: Failed to build gem native extension.
/home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby extconf.rb
checking for pg_config... no
No pg_config... trying anyway. If building fails, please try again with
--with-pg-config=/path/to/pg_config
checking for libpq-fe.h... no
Can't find the 'libpq-fe.h header
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers. Check the mkmf.log file for more details. You may
need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby
--with-pg
--without-pg
--with-pg-config
--without-pg-config
--with-pg_config
--without-pg_config
--with-pg-dir
--without-pg-dir
--with-pg-include
--without-pg-include=${pg-dir}/include
--with-pg-lib
--without-pg-lib=${pg-dir}/lib
extconf failed, exit code 1
Gem files will remain installed in /home/alex/.rvm/gems/ruby-2.1.1/gems/pg-0.17.1 for inspection.
Results logged to /home/alex/.rvm/gems/ruby-2.1.1/extensions/x86_64-linux/2.1.0/pg-0.17.1/gem_make.out
In Ubuntu I can do this
$ sudo apt-get install ruby-dev build-essential
and it will the same issue. But in Arch I can't because these don't exist.
I also have libmariadbclient installed.

You can do:
Step1: You choose "Tools" -> Library Manager -> J2ME Ant Extension
Step2: in tab Classpath, you remove "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
Step3: You add again "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
Step4: Then you build your application again.
It'll build normally.
I tried.

Adobe livecycle 8.05 failed to convert pdf to postscript

If I am posting this in the wrong forum, please move this to the correct place.
I have been using Adobe Live cycle designer 8.05.2073.1.374024 for 6 months to a year.
I have a working template that I am trying to modify. On this particular form if I move text or numeric fields around the form. I will get the following error. I am wondering if there is some way to see all suspected problem code in the .XDP template file (something like LINT).
[8/12/08 12:36:38:279 EDT] 71714be SystemOut O DEBUG [Servlet.Engine.Transports : 3] (DeserializerImpl.java:251) - Set value Message: Failed to convert PDF to PostScript, IDL:com/adobe/document/pdf/PDFOperationFailure:1.0
StackTrace:
com.taliantsoftware.adobe.ejb.AdobeRenderingException: Failed to convert PDF to PostScript, IDL:com/adobe/document/pdf/PDFOperationFailure:1.0
at com.taliantsoftware.adobe.ejb.AdobeRenderingServiceBean.createPostScriptFromPDF(AdobeRend eringServiceBean.java:501)
at com.taliantsoftware.adobe.ejb.AdobeRenderingServiceBean.renderDocument(AdobeRenderingServ iceBean.java:267)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:683)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:185)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:72)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:84)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:315)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:148)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:120)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:191)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.StatelessSessionContainer.internalInvoke(StatelessSessionContainer.java:331 )
at org.jboss.ejb.Container.invoke(Container.java:723)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:359)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:83)
at $Proxy83.renderDocument(Unknown Source)
at com.taliantsoftware.adobe.webservices.AdobeRenderingSoapBindingImpl.renderDocument(AdobeR enderingSoapBindingImpl.java:69)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:388)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:283)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.interna

Hello EPcommute
We aplogize for the inconvenience, it could be a temporary glitch. Request you to try after some time.
~Deepak

Conversion failed when converting nvarchar

Forum,
I have a set of data when when you try and make any amendments to the Business Partner Master screen and stock master data, the following error message appears:
[Microsoft][SQL Native Client][SQL Server] Conversion failed when converting the nvarchar value '1553452 01' to data type int. (CINF)
Again, it doesn't matter what's altered i.e. remarks, descriptions. The same error occurs.
The system i am testing on is 8.81 PL06
Has anyone come across this before?
Regards,
Juan

1.Try to stop add-on if you have.
2.If you have any UDF in master then check that data type.
3.If you have any FMS then also check there.
Because you have been tring to fill Nvarchar value in integer field.
Thanks
Manvendra Singh Niranjan

Conversion failed when converting date and/or time from character string

Hi experts,
I'm trying running a query in Microsoft Query but it gives the following error message:
"conversion failed when converting date and/or time from character string"
when asks me the data I'm inserting 31-01-2014
i've copy the query form the forum:
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

Hi,
The above error appears due to date format is differnt from SAP query generator and SQL server.
So you need convert all date in above query to SQL server required format.
Try to convert..let me know if not possible.
Thanks & Regards,
Nagarajan

MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment

Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah

You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com

"Failed to convert to native blob" error

Similar Messages

Maybe you are looking for