Failed to initialize my custom LoginModule

Hello,
I just developped a loginmodule. I also tried with several examples I found on the forum (thanks for this help). When I start Tomcat Th constructor of the LoginModule is successfull but Tomcat stops before the call of the initialize method.
I get the flollowing exception :
IllegalArgumentException: argument type mismatch.
I supposed it's a problem in my server.xml :
<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true" autoDeploy="true">
<Context path="/testAppli" reloadable="true" docBase="D:\Appl\eclipse\workspace\testAppli" workDir="D:\Appl\eclipse\workspace\testAppli\work\org\apache\jsp">
<Realm className="com.testappli.MyLoginModule" debug="3" appName="testAppli" userClassNames="com.testappli.MyPrincipal" roleClassNames="com.testappli.MyRolePrincipal">
</Realm>
</Context>     
</Host>
I don't understand where are the needed arguments of the initialize method :
public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options) {
// Save configuration values
this.subject = subject;
this.callbackHandler = callbackHandler;
this.sharedState = sharedState;
this.options = options;
Thanks for your help

Hello,
I'm sorry you're running into problems with our installer.  Could you try to download and install the appropriate installer from the following post:
Where can I find direct downloads of Flash Player for Windows or Macintosh?
Thanks,
Chris

Similar Messages

  • Your installation encountered errors. Installer failed to initialize. (CS5.5 upgrade)

    I am trying to install CS5.5 on an HP laptop running Windows 7. It is an upgrade version. I had it installed once, but InDesign did not function fully (could not access any tools or choose any of my paragraph style definitions). So I uninstalled and tried again. Now I can't get past the "Finish" window that reads as follows:
    Installation Status
    Your installation encountered errors
    Please try restarting your system and installing again
    Installer failed to initialize
    Contact Customer Support for further assistance
    <Click> DONE
    First let me say that contacting "Customer Support" is ineffectual. They will tell you that it is a tech problem and to contact Technical Support.
    Before I began getting this message over and over, upon installation, I would be told that the resolution of my monitor did not meet minimum requirements and needed to be set to at least 1024 x 768. My monitor was set to 1600 x 900.
    How can I get CS5.5 Design Premium to install on my laptop? TYSM (in advance) for any help.

    CyberAmazon54 I would recommend reviewing the installation logs for the Creative Suite 5.5 software you are trying to install.  You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.  You are welcome to post any specific errors you discover to this discussion.

  • How to verify that embedded OC4J is loading Custom LoginModule?

    I've written a custom login module to authenticate against a custom datastore. I've added a system property
    java.security.auth.login.config=C:\javadev\...\jaas.configas recommended by Yvonne here: Re: Custom LoginModule used by BC4J
    I still get the following when I load a UIX page out of this module:
    msg=JBO-33021: Failed authenticate user nullThere are many debug System.out(...) statements in the code (including in the initialize() function) but none are showing up in the OC4J console. Does anyone know how to verify that the LoginModule is indeed getting loaded? Is it normal for these System.out() statements not to show in the OC4J console?
    I get the impression that the LoginModule is not being loaded but I'm not sure if those traces are enough...
    Thanks,
    /sfl

    Thanks much for the prompt reply and debugging tips Steve and Avi!
    I used both switches (-DApplicationServerDebug and -verbose:class) and still no sign of the class being loaded; none of the traces (I did trace in the construct, though I failed to mention in my original post) nor do any of the app server or jvm debug messages show any sign of the LoginModule being loaded. So now I'm fairly certain I'm going about the wrong way to get this module loaded. Should I also be posting this to the JDeveloper forum?
    My application module configuration is as follows:
    jbo.security.config=<blank> (is this right?)
    jbo.security.context=oracle.security.jazn
    jbo.security.enforce=Must
    jbo.security.loginmodule=customModuleThe command line to the JVM contains:
    -Djava.security.auth.login.config=C:\javadev\jdev9052\j2ee\home\config\jaas.config[yes Avi, I was unfortunately imposed an M$ env. by the powers that be : ( ]
    And, well I've been trying a lot of different things w/ the jaas.config file:
    customModule{
    myPack.controller.MyLoginModule required;
    myApp{
    myPack.controller.MyLoginModule required;
    myPack.LookupModuleLocal{
    myPack.controller.MyLoginModule required;
    myPack.LookupModule{
    myPack.controller.MyLoginModule required;
    Ws-MyProg-webapp{
    myPack.controller.MyLoginModule required;
    default{
    myPack.controller.MyLoginModule required;
    current-workspace-app{
    myPack.controller.MyLoginModule required;
    };Any idea where I'm going wrong? Do I need to do anything else to get this module loaded? At first I thought I needed to modify the jazn-data.xml file but I saw a note in another thread Custom LoginModule used by BC4J which says that it's not necessary to modify it when using a custom LoginModule. Is this right, or should I be modifying that file?
    Thanks,
    java.lang.Object - jobject ;- )

  • Configuration system failed to initialize

    Getting error when I try to install an excel addin that I have published.
    Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    To publish the addin I  use the publish option on the build menu of VS2013.
    Specify the location to publish this application:  F:\publish   where F: is a USB drive.
    What is the default installation path on end user computers:  From a CD-ROM or DVD-ROM
    Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error.  I copy the entire publish directory to the C: drive of the target system and get the same error.
    What am I doing wrong? 
    thanks,

    Hi Steve,
    >>Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
    #Customization could not be loaded because the application domain could not be created.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
    If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly.  If it could not install correctly, I assume that there might be something wrong when you
    publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • The error "configuration system failed to initialize" occurred

    Hi
    When I converted and built the solution file that was developed by Visual Studio .net 2003 using Visual Studio 2005, the application program was abnormal-ended at the following step:
    m_TCPChannel = New System.Runtime.Remoting.Channels.Tcp.TcpChannel(tcp_properties, Nothing, Nothing)
    The error message was "configration system failed to initialize".  The Exception.ToString said that the root <configuration> tag was not included in the configuration file. Therefore, I changed <configopt> tag to <configuration>
    tag in the app.config file of the target project, and then executed again. Next time, the application program was abnormal-ended by the unrecognized section <xs:schema>. Therefore, I changed the app.config file to the simple one (only <configuration>
    and </configuration> tags), and then executed again. The error didn't occur. I guess that it's caused by configuration settings. Please advise.
    app.config file:
    <?xml version="1.0" standalone="yes"?>
    <configopt>
    <xs:schema id="configopt" xmlns="" xmlns:xs="URLリンク" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
    <xs:element name="configopt" msdata:IsDataSet="true" msdata:Locale="en-AU">
    <xs:complexType>
    <xs:choice maxOccurs="unbounded">
    <xs:element name="Environment">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="Name" type="xs:string" minOccurs="0" />
    <xs:element name="System" type="xs:string" minOccurs="0" />
    <xs:element name="DataLibrary" type="xs:string" minOccurs="0" />
    <xs:element name="Default" type="xs:boolean" minOccurs="0" />
    <xs:element name="UserId" type="xs:string" minOccurs="0" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:schema>
    <Environment>
    <Name>Test</Name>
    <System>XXXX.COM</System>
    <DataLibrary>XXXTEST</DataLibrary>
    <Default>false</Default>
    <UserId></UserId>
    </Environment>
    <Environment>
    <Name>Production</Name>
    <System>XXXXX.COM</System>
    <DataLibrary>XXXPROD</DataLibrary>
    <Default>true</Default>
    <UserId />
    </Environment>
    </configopt>

    Hi,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Since your issue occurred on the converted project from VS .net 2003 to VS2005, and VS2005 is out of
    our mainstream support , I suggest that you should consult on some development forums to check whether they will to provide some suggestions or
    submit a support ticket to below site,
    https://support.microsoft.com/oas/default.aspx?Gprid=1117&st=1&wfxredirect=1&sd=gn&wfxredirect=1
    Thank you for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "Configuration system failed to initialize" when trying to connect FM12 to Sharepoint

    Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize".  I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error.  The PC (which is actually a VM) is running Windows Server  2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied.  FM12 is installed as part of Technical Comms Suite 5 subscription.
    Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?

    Hi Steve,
    >>Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
    #Customization could not be loaded because the application domain could not be created.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
    If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly.  If it could not install correctly, I assume that there might be something wrong when you
    publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • When I try to install Photoshop Elements I receive the error installer failed to initialize.

    I am having the same issue.  Purchased Photoshop Elements 10 just a few minutes ago, and even though the download (direct download of PSE10) seemed to go fine, I ran the installer and got a message reading, "Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem."
    After downloading and running Adobe Support Advisor, the message I got reads, "Inspection could not identify any issues.  Please contact Adobe Support for further assistance."
    Can you help?
    Thanks,
    Lindy

    Thanks for your reply.
    I have tried downloading and several times.  I have used the Akamai downloading method and the direct download.  I am able to download the .dmg file but not install the application.
    I am on a Mac Pro 2.93 GHz running OS10.6.8, and I have plenty of RAM (8GB) and hard disc space (>350GB).
    I have also placed a call to customer support.  Waiting for a call back.
    Again, thanks.
    Lindy

  • UNX issue : Failed to initialize Query Panel (service issue?)

    Hello all,
    For a couple off days now we are trying to use universe(s) in Desing studio with no luck.
    We use the Efashion single source relational universe on which we can run Webi's without a problem . When we add a datasource in DS we see and can select the unx but when we push the "edit query specification" button DS freezes and return the error : Failed to initialize Query Panel
    We just upgrade tot DS1.2 SP01 both on server side as on client side.
    This is the error from the error log : which seems to have a connection problem to a certain service:
    Any of you have an idea how to proceed?
    All servers run fine when we check the CMC and an APS is added for Design studio (analysis) .DS works fine with BEX queries...
    Thanks in advance.
    !ENTRY com.sap.ip.bi.zen.ui 4 0 2014-03-14 12:43:33.876
    !MESSAGE Failed to initialize Query Panel
    !STACK 0
    com.businessobjects.dsl.services.workspace.impl.WorkspaceException: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
           at com.businessobjects.dsl.services.dataprovider.impl.AbstractDataProviderWithUniverse.createDataSource(AbstractDataProviderWithUniverse.java:437)
           at com.businessobjects.dsl.services.dataprovider.impl.QuerySpecDataProvider.createInitialDataSource(QuerySpecDataProvider.java:609)
           at com.businessobjects.dsl.services.dataprovider.impl.QuerySpecDataProvider.finalizeCreation(QuerySpecDataProvider.java:852)
           at com.businessobjects.dsl.services.workspace.impl.AbstractBuiltInDataProviderBuilder.buildDataProvider(AbstractBuiltInDataProviderBuilder.java:36)
           at com.businessobjects.dsl.services.dataprovider.impl.DataProviderFactory.createDataProviderWithUniverse(DataProviderFactory.java:190)
           at com.businessobjects.dsl.services.dataprovider.impl.DataProviderFactory.createAndAddDataProvider(DataProviderFactory.java:108)
           at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:83)
           at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
           at com.sap.ip.bi.zen.backends.bip.ui.dialogs.QueryPanelDialog.createQueryPanelContext(QueryPanelDialog.java:133)
           at com.sap.ip.bi.zen.backends.bip.ui.dialogs.QueryPanelDialog.createDialogArea(QueryPanelDialog.java:97)
           at org.eclipse.jface.dialogs.Dialog.createContents(Dialog.java:775)
           at com.sap.ip.bi.zen.ui.internal.dialogs.ZenTrayDialog.createContents(ZenTrayDialog.java:63)
           at org.eclipse.jface.window.Window.create(Window.java:432)
           at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1104)
           at com.sap.ip.bi.zen.ui.internal.dialogs.ZenTrayDialog.open(ZenTrayDialog.java:110)
           at com.sap.ip.bi.zen.ui.internal.dialogs.datasource.DataSourceDialogController.editDataSourceClickedInternal(DataSourceDialogController.java:158)
           at com.sap.ip.bi.zen.ui.internal.dialogs.datasource.DataSourceDialogController$1.run(DataSourceDialogController.java:147)
           at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
           at com.sap.ip.bi.zen.ui.internal.dialogs.datasource.DataSourceDialogController.editDataSourceClicked(DataSourceDialogController.java:144)
           at com.sap.ip.bi.zen.ui.internal.dialogs.datasource.DataSourceSelectionPane.editQueryButtonClicked(DataSourceSelectionPane.java:253)
           at com.sap.ip.bi.zen.ui.internal.dialogs.datasource.DataSourceSelectionPane$6.widgetSelected(DataSourceSelectionPane.java:233)
           at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
           at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
           at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
           at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
           at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
           at org.eclipse.jface.window.Window.runEventLoop(Window.java:826)
           at org.eclipse.jface.window.Window.open(Window.java:802)
           at com.sap.ip.bi.zen.ui.internal.dialogs.ZenTrayDialog.open(ZenTrayDialog.java:112)
           at com.sap.ip.bi.zen.ui.internal.commands.AddDataSourceHandler.execute(AddDataSourceHandler.java:24)
           at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290)
           at org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90)
           at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
           at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
           at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
           at java.lang.reflect.Method.invoke(Unknown Source)
           at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
           at org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243)
           at org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224)
           at org.eclipse.e4.core.contexts.ContextInjectionFactory.invoke(ContextInjectionFactory.java:132)
           at org.eclipse.e4.core.commands.internal.HandlerServiceHandler.execute(HandlerServiceHandler.java:167)
           at org.eclipse.core.commands.Command.executeWithChecks(Command.java:499)
           at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508)
           at org.eclipse.e4.core.commands.internal.HandlerServiceImpl.executeHandler(HandlerServiceImpl.java:213)
           at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.executeItem(HandledContributionItem.java:850)
           at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.handleWidgetSelection(HandledContributionItem.java:743)
           at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.access$7(HandledContributionItem.java:727)
           at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem$4.handleEvent(HandledContributionItem.java:662)
           at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
           at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
           at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
           at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
           at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1113)
           at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
           at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:997)
           at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:138)
           at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:610)
           at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
           at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:567)
           at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
           at com.sap.ip.bi.zen.ui.internal.application.ZenApplication.start(ZenApplication.java:36)
           at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
           at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
           at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
           at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
           at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
           at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
           at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
           at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
           at java.lang.reflect.Method.invoke(Unknown Source)
           at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
           at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
           at org.eclipse.equinox.launcher.Main.run(Main.java:1450)
    Caused by: com.businessobjects.mds.services.solver.ConnectionSolverException: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.addCredentialInfo(AbstractConnectionSolver.java:238)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.solve(AbstractConnectionSolver.java:136)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.solveRelational(AbstractConnectionSolver.java:151)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.solveRelational(AbstractConnectionSolver.java:147)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.solveRelational(AbstractConnectionSolver.java:143)
           at com.businessobjects.mds.services.helpers.DataFoundationHelper.getConnection(DataFoundationHelper.java:892)
           at com.businessobjects.mds.services.helpers.DataFoundationHelper.isErpDataFoundation(DataFoundationHelper.java:2896)
           at com.businessobjects.mds.services.helpers.UniverseHelper.isErpUniverse(UniverseHelper.java:1554)
           at com.businessobjects.dsl.services.datasource.DataSourceFactory.createQueryCapability(DataSourceFactory.java:286)
           at com.businessobjects.dsl.services.datasource.DataSourceFactory.fillQueryCapability(DataSourceFactory.java:959)
           at com.businessobjects.dsl.services.datasource.DataSourceFactory.getDataSource(DataSourceFactory.java:839)
           at com.businessobjects.dsl.services.dataprovider.impl.AbstractDataProviderWithUniverse.createDataSourceFromUniverse(AbstractDataProviderWithUniverse.java:572)
           at com.businessobjects.dsl.services.dataprovider.impl.AbstractDataProviderWithUniverse.retrieveDataSource(AbstractDataProviderWithUniverse.java:542)
           at com.businessobjects.dsl.services.dataprovider.impl.AbstractDataProviderWithUniverse.buildDataSource(AbstractDataProviderWithUniverse.java:448)
           at com.businessobjects.dsl.services.dataprovider.impl.AbstractDataProviderWithUniverse.createDataSource(AbstractDataProviderWithUniverse.java:432)
           ... 72 more
    Caused by: com.sap.connectivity.cs.core.CSError: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
           at com.sap.connectivity.cs.remoting.corba.proxy.ConnectionManager.<init>(ConnectionManager.java:81)
           at com.sap.connectivity.cs.remoting.corba.proxy.ConnectionServer.getConnectionManager(ConnectionServer.java:125)
           at com.sap.connectivity.cs.core.Environment.CreateConnectionManager(Environment.java:530)
           at com.sap.connectivity.cs.core.Environment.CreateConnectionManager(Environment.java:504)
           at com.sap.connectivity.cs.api.trace.EnvironmentLogger.CreateConnectionManager(EnvironmentLogger.java:368)
           at com.businessobjects.mds.services.relational.CsService.getAuthenticationMode(CsService.java:180)
           at com.businessobjects.mds.services.relational.CsService.addCredentialInfo(CsService.java:485)
           at com.businessobjects.mds.services.solver.AbstractConnectionSolver.addCredentialInfo(AbstractConnectionSolver.java:235)
           ... 86 more
    Caused by: com.crystaldecisions.sdk.exception.SDKException$OCAFramework: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
    cause:com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$AllServicesDown: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
    detail:Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
           at com.crystaldecisions.sdk.exception.SDKException.map(SDKException.java:140)
           at com.sap.connectivity.cs.remoting.bip.SvcFactoryBase.getManagedService(SvcFactoryBase.java:183)
           at com.sap.connectivity.cs.remoting.bip.SvcFactoryBase.getManagedService(SvcFactoryBase.java:128)
           at com.sap.connectivity.cs.remoting.corba.svchelpers.NetworkLayerSvcFactory.getServiceFromCriteria(NetworkLayerSvcFactory.java:53)
           at com.sap.connectivity.cs.remoting.corba.svchelpers.NetworkLayerLookup.getServiceFromCriteria(NetworkLayerLookup.java:114)
           at com.sap.connectivity.cs.remoting.corba.svchelpers.NetworkLayerLookup.getService(NetworkLayerLookup.java:83)
           at com.sap.connectivity.cs.remoting.corba.proxy.ConnectionManager.<init>(ConnectionManager.java:68)
           ... 93 more
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$AllServicesDown: Unable to find servers in CMS vyouboxd01.you.com:6400 and cluster @vyouboxd01.you.com:6400 with kind connectionserver and service CS_CORBA_NetworkLayer. All such servers could be down or disabled by the administrator. (FWM 01014)
           at com.crystaldecisions.enterprise.ocaframework.ServerController.redirectServer(ServerController.java:664)
           at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.redirectServer(ServiceMgr.java:959)
           at com.crystaldecisions.enterprise.ocaframework.ManagedSession.redirectServer(ManagedSession.java:338)
           at com.crystaldecisions.enterprise.ocaframework.ManagedSession.get(ManagedSession.java:247)
           at com.crystaldecisions.enterprise.ocaframework.ManagedSessions.get(ManagedSessions.java:299)
           at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService_aroundBody4(ServiceMgr.java:520)
           at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService_aroundBody5$advice(ServiceMgr.java:512)
           at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(ServiceMgr.java:1)
           at com.sap.connectivity.cs.remoting.bip.SvcFactoryBase.getManagedService(SvcFactoryBase.java:164)
             ... 98 more

    Hi Bram,
    I had a look in your Java-Exception and there a connectionserver is missing.
    I know that there are two kind of connection servers 32 and 64 Bit. Do one of your APS Servers have connectivity and connectivity 32 Bit ???
    I had an issue when i first wanted to use a .unx connection with DS with my splitted APS.
    I had one APS only containing the Analysis service. To get to run my .unx access i had to add the Adaptive connectivity Service to the APS containing the analysis service.
    On top of that i had to add the DSL Bridge (otherwise my adaptive connectivity Service did not start)
    Perhabs this helps you out.
    Good luck
    Manfred

  • How do I resolve "Installation failed to Initialize" message?

    I've used Adobe products for over 20 years. Now I'm truly stuck, and live chat hasn't been helpful at all (no responses to my questions, just instructions ignoring what I'm saying, which is basically that I tried all the suggestions/instructions already, and they didn't work). My OS is Windows 7, Home Professional. I purchased CS5.5 Design Premium on a CD and attempted to install it. The CD seemed to work; the installation started. Then nothing happened for over an hour, so I cancelled the installation and rebooted my machine. Now when I try to install, I receive a message saying that the "Installation failed to initialize" and that I must clink on the link for Support Advisor. When I do this, the Manager finds no errors. I can't find installation logs. Live chat suggested that I change the ODBE (or something like that) file to "old" and then try again. This didn't work. I downloaded the Application Manager. This didn't help, either. Copying the contents of the CD to the desktop didn't get better results. Live chat suggested that I download the trial version and then attempt to use my legitimate serial number. I said this probably wouldn't work either, because the issues from the first CD attempt hadn't been resolved. Nine hours later the trial version finished downloading, and after all that, I got the same failure to initialize message. I replied to my "case file", and, so help me, the same customer rep responded, telling me to download the trial version. In other words, he completely ignored the fact that I'd tried and it didn't work. I've looked on the forum, and there was a discussion about this "failure to initialize", but the discussion was completely in German, which doesn't help me at all. I'm hoping that someone on this forum can help me through this process; this software is mega expensive and should come with better support.

    Jeff,
    My state of mind was such that I didn't dare post any updates until I'd made sure that each component of CS5.5 actually worked. Eureka! Using the new administration account, I was able to get the CD to install the software in less than an hour...which does tell me that there was a problem all along with the first attempt which hung for over an hour. I still don't know what is wrong with the rights on the current account, because I haven't had a problem installing other software, so I don't know how helpful this will be to someone in the future who encounters the same "failed to initialize" message and goes searching through this form for answers.
    Other notes...I did disable all other running programs; didn't do the modified mode this time, though that had been a previous attempt which didn't work (perhaps because I didn't remove some of the files, such as the cache, or rename the ODBE file -- you know more about this than I do). This was part of the frustration with the live chat experience; there was never an identification of the errors (I didn't know about the logs in the temp file, and apparently neither did the live chatter), so we just kept trying and trying without making other changes that I thought should have been addressed before we continued the attempts to install. I did state this many times, but my comments were ignored.
    As per my concern, built upon a comment by a live chatter -- that I couldn't switch between the two administration accounts--, it wasn't a problem, at least in my version of Windows. I went to the shut-down button, selected the arrow to the right, and the first option that appeared in the fly-out panel was "switch users". Completely not a problem.
    For anyone else who encounters the same frustrations that I did, I'd strongly recommend communicating with Jeff...don't know how to thank him enough for helping restore whatever is left of my sanity. Thank you so much, Jeff. Sounds so trite to say that I appreciate your help; I'm an editor, but  I'm at a loss for words that will convey the depth of my gratitude. Now I can address all those projects that have been backlogged while I've fought with the installation.

  • Installer failed to initialize, missing file?

    I tried to download Adobe creative suite 6 and everytime I do this pops up. I have already tried restarting it a few times and quitting applications and everything but it's not working. My computer is a brand new Macbook pro that is only about a week old. So I'm not sure why this is happening.
    Your installation encountered errors.
    Installer Failed to initialize. his could be due to a missing file.
    More troubleshooting tips:
    1. Restart your computer.
    2. Exit all applications including startup items, virus checking and firewall software.
    3. Launch the installer and reinstall your applications.
    Is the problem persist, please contact Customer Support for further assistance.

    Listed steps would help:
    1) Create a new Admin account or enable Root account.
        http://support.apple.com/kb/PH4600
        http://support.apple.com/kb/ht1528
    2) re-download the installer from the mentioned link.  Follow the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download.

  • MessageBrokerService failed to initialize

    I edited my server.xml to open up the https port, then Blaze threw this exception at initialization.
    I want to use Custom authentication for my application.  Is my server.xml set up correctly?  I tried it with vanilla tomcat, it worked perfectly.
    I also tried editing catalina.policy to include the Trace class, it didn't work.
    Thanks.
    **** MessageBrokerServlet failed to initialize due to runtime exception:   Error: java.lang.ExceptionInInitializerError
    at flex.messaging.config.FlexConfigurationManager.getConfigurationParser(FlexConfigurationMa nager.java:163)
    at flex.messaging.config.FlexConfigurationManager.getMessagingConfiguration(FlexConfiguratio nManager.java:68)
    at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Unknown Source)
    at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
    at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
    at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:115)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1155)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
    at org.apache.catalina.core.StandardService.start(StandardService.java:516)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
    at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
    Caused by: java.security.AccessControlException: access denied (java.util.PropertyPermission trace.config read)
    at java.security.AccessControlContext.checkPermission(Unknown Source)
    at java.security.AccessController.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
    at java.lang.System.getProperty(Unknown Source)
    at flex.messaging.util.Trace.<clinit>(Trace.java:49)
    ... 30 more
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Note:  A "Server" is not itself a "Container", so you may not
         define subcomponents such as "Valves" at this level.
         Documentation at /docs/config/server.html
    --><Server port="8005" shutdown="SHUTDOWN">
      <!--APR library loader. Documentation at /docs/apr.html -->
      <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/>
      <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
      <Listener className="org.apache.catalina.core.JasperListener"/>
      <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html -->
      <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
      <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
      <!-- Global JNDI resources
           Documentation at /docs/jndi-resources-howto.html
      -->
      <GlobalNamingResources>
        <!-- Editable user database that can also be used by
             UserDatabaseRealm to authenticate users
        -->
        <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/>
      </GlobalNamingResources>
      <!-- A "Service" is a collection of one or more "Connectors" that share
           a single "Container" Note:  A "Service" is not itself a "Container",
           so you may not define subcomponents such as "Valves" at this level.
           Documentation at /docs/config/service.html
       -->
      <Service name="Catalina">
        <!--The connectors can use a shared executor, you can define one or more named thread pools-->
        <!--
        <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
            maxThreads="150" minSpareThreads="4"/>
        -->
        <!-- A "Connector" represents an endpoint by which requests are received
             and responses are returned. Documentation at :
             Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
             Java AJP  Connector: /docs/config/ajp.html
             APR (HTTP/AJP) Connector: /docs/apr.html
             Define a non-SSL HTTP/1.1 Connector on port 8080
        -->
        <Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>
        <!-- A "Connector" using the shared thread pool-->
        <!--
        <Connector executor="tomcatThreadPool"
                   port="8080" protocol="HTTP/1.1"
                   connectionTimeout="20000"
                   redirectPort="8443" />
        -->         
        <!-- Define a SSL HTTP/1.1 Connector on port 8443
             This connector uses the JSSE configuration, when using APR, the
             connector should be using the OpenSSL style configuration
             described in the APR documentation -->
        <Connector SSLEnabled="true" clientAuth="false" keystoreFile="keystore" keystorePass="changeit"
           maxThreads="150" port="8443" protocol="HTTP/1.1" scheme="https"
           secure="true" sslProtocol="TLS"/>
        <!-- Define an AJP 1.3 Connector on port 8009 -->
        <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>
        <!-- An Engine represents the entry point (within Catalina) that processes
             every request.  The Engine implementation for Tomcat stand alone
             analyzes the HTTP headers included with the request, and passes them
             on to the appropriate Host (virtual host).
             Documentation at /docs/config/engine.html -->
        <!-- You should set jvmRoute to support load-balancing via AJP ie :
        <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">       
        -->
        <Engine defaultHost="localhost" name="Catalina">
          <!--For clustering, please take a look at documentation at:
              /docs/cluster-howto.html  (simple how to)
              /docs/config/cluster.html (reference documentation) -->
          <!--
          <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
          -->      
          <!-- The request dumper valve dumps useful debugging information about
               the request and response data received and sent by Tomcat.
               Documentation at: /docs/config/valve.html -->
          <!--
          <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
          -->
          <!-- This Realm uses the UserDatabase configured in the global JNDI
               resources under the key "UserDatabase".  Any edits
               that are performed against this UserDatabase are immediately
               available for use by the Realm.  -->
           <!--
          <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
           -->
           <Realm className="org.apache.catalina.realm.MemoryRealm"/>
          <!-- Define the default virtual host
               Note: XML Schema validation will not work with Xerces 2.2.
           -->
          <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false">
            <!-- SingleSignOn valve, share authentication between web applications
                 Documentation at: /docs/config/valve.html -->
            <!--
            <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
            -->
            <!-- Access log processes all example.
                 Documentation at: /docs/config/valve.html -->
            <!--
            <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
                   prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
            -->
          <Context docBase="BlazeServer" path="/BlazeServer" reloadable="true" source="org.eclipse.jst.jee.server:BlazeServer"/></Host>
        </Engine>
      </Service>
    </Server>

    Of course not. The application is using nokia api
    stuff. This wil obviously not run on a Siemens
    device/emulator.
    You'll have to port the application to either pure
    MIDP code, or to the siemens api on order to make it
    work.Siemens SX1 and many SonyEricsson phones implement the Nokia UI API.

  • Cannot install Application Manager: "Installer failed to initialize"

    Hello,
    Cannot install Application Manager.  I get this error message: "Installer failed to initialize".
    Please help,
    g2598m

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • The application failed to initialize properly 0xc000007B.

    HI team, I had developed an console application in visual studio 2012 .when i running it on local machine it works fine but when i run this EXE on server 2003 it shows me : 0xc000007B Error - The application failed to initialize properly 0xc000007B .pls
    help me out . Thanks in advance.
    saurabh singh

    Thanks for Wyck's help.
    Hi Saurabh Bhadoria,
    I think Wyck's suggestion would be helpful, I doubt that your windows server 2003 doesn't have the enough requirements.
    In addition, as far as I know, one important issue is that the .NET 4.5 doesn't support the Windows Server 2003.
    Reference:
    https://visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2723735-make-net-4-5-work-on-any-os-that-supports-4-0
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/4aeb7755-7cf5-44bf-b83b-b928e082ac33/install-visual-studio-agents-2012-on-server-2003-sp2?forum=vssetup
    So even if it is the C# app, if you build it with .NET 4.5, I still doubt that it would have a limitation for it since the .NET 4.5 doesn't work in windows server 2003.
    So if possible, please compile your app with old .NET version, and make sure that the old .NET version could install in this Environment. 
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Pop-up 'Another instance is running. Configuration system failed to initialize.'

    Hello - my system kept 'freezing' when a pop-up saying, ' Silverlight Plug-in has crashed' with options to repair or close. No matter what I did, t happened several times an hour, as well as the page and pointer freezing just as frequently. Often the only solution was to turn off the computer with the on/off button. Someone at work told me to delete the plug-in and I did and the problem stopped for a few days. Now, the plug-in has reappeared on the notebook, but less frequently, and the a/n pop-up comes on when I start the notebook. I suspect this action is related to what I unsuccessfully deleted. My screen and pointer are freezing less often. I appreciate opinions on how to correct this darned annoying problem.

    Hi Steve,
    >>Error message is  "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
    For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
    #Customization could not be loaded because the application domain could not be created.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
    If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly.  If it could not install correctly, I assume that there might be something wrong when you
    publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • [Closed]Bumblebee - Failed to initialize the NVIDIA GPU

    Hi,
    I'am having trouble with bumblebee. When i ran
    optirun glxgears -info
    I get the following error,
    [ 66.574]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 66.574] X Protocol Version 11, Revision 0
    [ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
    [ 66.574] Build Date: 01 July 2013 10:48:42AM
    [ 66.574]
    [ 66.574] Current version of pixman: 0.30.0
    [ 66.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
    [ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 66.607] (==) ServerLayout "Layout0"
    [ 66.607] (==) No screen section available. Using defaults.
    [ 66.607] (**) |-->Screen "Default Screen Section" (0)
    [ 66.607] (**) | |-->Monitor "<default monitor>"
    [ 66.607] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 66.607] (**) | |-->Device "DiscreteNvidia"
    [ 66.607] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 66.607] (**) Option "AutoAddDevices" "false"
    [ 66.607] (**) Option "AutoAddGPU" "false"
    [ 66.607] (**) Not automatically adding devices
    [ 66.607] (==) Automatically enabling devices
    [ 66.607] (**) Not automatically adding GPU devices
    [ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 66.607] Entry deleted from font path.
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 66.607] Entry deleted from font path.
    [ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 66.607] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 66.607] (==) |-->Input Device "<default pointer>"
    [ 66.607] (==) |-->Input Device "<default keyboard>"
    [ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 66.607] (II) Loader magic: 0x7fdc20
    [ 66.607] (II) Module ABI versions:
    [ 66.607] X.Org ANSI C Emulation: 0.4
    [ 66.607] X.Org Video Driver: 14.1
    [ 66.607] X.Org XInput driver : 19.1
    [ 66.607] X.Org Server Extension : 7.0
    [ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 66.608] setversion 1.4 failed
    [ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 66.609] Initializing built-in extension Generic Event Extension
    [ 66.609] Initializing built-in extension SHAPE
    [ 66.609] Initializing built-in extension MIT-SHM
    [ 66.609] Initializing built-in extension XInputExtension
    [ 66.609] Initializing built-in extension XTEST
    [ 66.609] Initializing built-in extension BIG-REQUESTS
    [ 66.609] Initializing built-in extension SYNC
    [ 66.609] Initializing built-in extension XKEYBOARD
    [ 66.609] Initializing built-in extension XC-MISC
    [ 66.609] Initializing built-in extension SECURITY
    [ 66.609] Initializing built-in extension XINERAMA
    [ 66.609] Initializing built-in extension XFIXES
    [ 66.609] Initializing built-in extension RENDER
    [ 66.609] Initializing built-in extension RANDR
    [ 66.609] Initializing built-in extension COMPOSITE
    [ 66.609] Initializing built-in extension DAMAGE
    [ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 66.609] Initializing built-in extension DOUBLE-BUFFER
    [ 66.609] Initializing built-in extension RECORD
    [ 66.609] Initializing built-in extension DPMS
    [ 66.609] Initializing built-in extension X-Resource
    [ 66.609] Initializing built-in extension XVideo
    [ 66.609] Initializing built-in extension XVideo-MotionCompensation
    [ 66.609] Initializing built-in extension XFree86-VidModeExtension
    [ 66.609] Initializing built-in extension XFree86-DGA
    [ 66.609] Initializing built-in extension XFree86-DRI
    [ 66.609] Initializing built-in extension DRI2
    [ 66.609] (II) LoadModule: "glx"
    [ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
    [ 67.248] compiled for 4.0.2, module version = 1.0.0
    [ 67.248] Module class: X.Org Server Extension
    [ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
    [ 67.257] Loading extension GLX
    [ 67.257] (II) LoadModule: "nvidia"
    [ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 67.346] compiled for 4.0.2, module version = 1.0.0
    [ 67.346] Module class: X.Org Video Driver
    [ 67.354] (II) LoadModule: "mouse"
    [ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 67.357] (II) Module mouse: vendor="X.Org Foundation"
    [ 67.357] compiled for 1.14.0, module version = 1.9.0
    [ 67.357] Module class: X.Org XInput Driver
    [ 67.357] ABI class: X.Org XInput driver, version 19.1
    [ 67.357] (II) LoadModule: "kbd"
    [ 67.358] (WW) Warning, couldn't open module kbd
    [ 67.358] (II) UnloadModule: "kbd"
    [ 67.358] (II) Unloading kbd
    [ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
    [ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 67.359] (--) using VT number 7
    [ 67.367] (II) Loading sub module "fb"
    [ 67.367] (II) LoadModule: "fb"
    [ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 67.367] (II) Module fb: vendor="X.Org Foundation"
    [ 67.368] compiled for 1.14.2, module version = 1.0.0
    [ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 67.368] (II) Loading sub module "wfb"
    [ 67.368] (II) LoadModule: "wfb"
    [ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 67.376] (II) Module wfb: vendor="X.Org Foundation"
    [ 67.376] compiled for 1.14.2, module version = 1.0.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "shadow"
    [ 67.377] (II) LoadModule: "shadow"
    [ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 67.377] (II) Module shadow: vendor="X.Org Foundation"
    [ 67.377] compiled for 1.14.2, module version = 1.1.0
    [ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 67.377] (II) Loading sub module "ramdac"
    [ 67.377] (II) LoadModule: "ramdac"
    [ 67.377] (II) Module "ramdac" already built-in
    [ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 67.378] (==) NVIDIA(0): RGB weight 888
    [ 67.378] (==) NVIDIA(0): Default visual is TrueColor
    [ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
    [ 67.379] (**) NVIDIA(0): Ignoring EDIDs
    [ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 67.379] (**) NVIDIA(0): mode
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 72.511] (EE) NVIDIA(0): README for additional information.
    [ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 72.512] (II) UnloadModule: "nvidia"
    [ 72.512] (II) UnloadSubModule: "shadow"
    [ 72.512] (II) UnloadSubModule: "wfb"
    [ 72.512] (II) UnloadSubModule: "fb"
    [ 72.512] (EE) Screen(s) found, but none have a usable configuration.
    [ 72.512] (EE)
    Fatal server error:
    [ 72.512] (EE) no screens found(EE)
    [ 72.512] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 72.512] (EE)
    [ 72.512] (EE) Server terminated with error (1). Closing log file.
    This is /etc/bumblebee/bumblebee.conf file;
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    In addition
    dmesg | grep nvidia
    does not return anything and
    modprobe nvidia
    returns
    modprobe: ERROR: could not insert 'nvidia': No such device
    There is no /etc/X11/xorg.conf file.
    Last edited by Selo (2013-07-30 19:41:25)

    Hello, I also I have that problem.
    $primusrun glxgears
    primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
    $grep -Fn '(EE' /var/log/Xorg.8.log
    15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
    110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
    153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
    155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    156:[ 880.312] (EE) NVIDIA(0): README for additional information.
    157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
    163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
    164:[ 880.312] (EE)
    166:[ 880.312] (EE) no screens found(EE)
    167:[ 880.312] (EE)
    171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    172:[ 880.313] (EE)
    173:[ 880.313] (EE) Server terminated with error (1). Closing log file.

Maybe you are looking for

  • Jsp-tomcat

    Dear members; I am a new web jsp developper using Eclipse and tomcat I have created a new project in Eclipse named �personne� and under which I created my first jsp file called �formulaire.jsp� when I try to access my jsp file in tomcat(http://localh

  • Anyone know of a tutorial on making this please?

    Hi there, New'ish to using photoshop but use Fireworks and other Adobe stuff so; Attached is a marble image with letters and was wondering does anyone know of a tutorial in Photoshop that could show me how to make it? Many thanks, P.

  • Safari quits only on one Discussions forum

    I have a weird thing happening. When I go to my bookmark for Apples Logic Pro discussions forum, Safari immediately quits. This also happens when I navigate there from Apples home page, so I don't think it's bookmark related... I can get to any other

  • Maps app: had no idea, actual compass!

    I didn't realize the iPhone 4 could do this. tap on the Maps app & tap on the little arrow twice after this move ur phone in a circle & the map moves! was anyone else aware of this? I wasn't. REALLY comes in handy

  • Flex 2-14 issues

    Dear Users, I strongly advise you not to consider buying the Lenovo model Flex 2-14 or any Lenovo machines at all. I bought one recently and the screen has yellow spots in the corners and on the sides from day 1. Also the laptop rattles thanks to its