Failed to Install the Printer either USB, Wireless and Ethernet

Im using HP Officejet 8600Plus and my computer is running Windows 7 OS. I was able to print and scan before but for some reason, scanning just stopped. I tried to uninstall the software and reinstall it using the Cd and downloaded full feature software but I can't install the driver. I tried USB, my computer detects the printer usin USB but after that process comes with a RED X "Failed to Install..." Same issue with Wireless and Ethernet, IP address is available, printer detected but unsuccessful installation.
Tried to do in-OS, on device manager tried to remove the OJ8600(grayedout with "!") but it says Access denied. Changed permission to regedit nothings change. uninstall SW up to level 4 and used hp removal utility, hide microsoft services and disable all services/startup on MSCONFIG still the same. Please help

i mean "Devices a nd printers" not device manager, sorry

Similar Messages

Printing on a wireless and ethernet network

Just installed AEBS wireless network:
Comcast modem to AESB - to USB printer, and to hub.
iMac G5 and MacBook on wireless cards from AESB
iMac G4 ethernet to hub
HL LaserJet 5m ethernet to hub
wireless part was a snap, and all can print to USB printer
HP LaserJet can be seen by all, but no one can print to it.
LaserJet has an assigned IP 192.168.1.6 (can be seen on the test page). this is in the range that the AESB provides.
all units have internet access.
what am I missing?
I had a Netgear router/firewall in the place of the hub, but removed it and replaced it with the Asante hub because I thought there might be some conflicts with router and the AESB.
repaired permissions, currently getting a message "unable to get printer status (server-error-operation-not-supported)!"
just can't figure out what to do next.
printer had always been reliable on an ethernet network.
thanks for any help.
iMac G5 1.8 rev 1, MacBook Pro 2.13, iMac G4 17" Mac OS X (10.4.8) AEBS, Asante FriendlyNet dual speed hub FH205P, HP LaserJet 5m Ethernet Jet Direct J, Canon S900 USB

Thanks for the reply
PSU shows it as defaultt printer and "idle".
when I go to print a document, everything looks normal as the job is sent to the printer, but when I look at the printer. it shows connecting on port 631 until I get an error message.
can it be the port assignment that is wrong?
My Printer self test sheet shows that "AppleTalk is Ready"
the test sheet is where I founf the IP address after AEBS setup
by seeing the printer, I mean thet when the print dialogue box comes up, the printer is there.
actually, that is probably not quite true.
I "added" the printer, named by its assigned IP address.
In the AEBS setup, I changed the address convention to 192.168.1.XXX from the default.
no particular reason, other than to check the change of the assigned IP addresses for the network nodes.
I am able to ping the printer with no problems.
is the driver setup made in the Printer Setup Utility?
if so, how would I go about changing it and to what shall I change the driver to?
from the network Utility in the AppleTalk Statistics and error counts section: (don't know if this is relevant)
AppleTalk lookup has started ...
AppleTalk interface.............. en1
Network Number .................. 65422 (0xff8e)
Node ID ......................... 2 (0x2)
Current Zone .................... *
Bridge net ...................... 0 (0x0)
Bridge number ................... 0 (0x0)
DDP statistics:
Packets Transmitted ............. 49
Bytes Transmitted ............... 1741
Best Router Cache used (pkts) ... 0
Packets Received ................ 62
Bytes Received .................. 2179
Packets for unregistered socket . 0
Packets for out of range socket . 0
Length errors ................... 0
Checksum errors ................. 0
Packets dropped (no buffers) .... 0
AppleTalk lookup has completed ...
AppleTalk Information:
AppleTalk lookup has started ...
AppleTalk interface.............. en0
PRAM default zonename ........... *
PRAM netnumber .................. 65489 (0xffd1)
PRAM node id .................... 7 (0x7)
AppleTalk interface.............. en1
PRAM default zonename ........... *
PRAM netnumber .................. 65422 (0xff8e)
PRAM node id .................... 2 (0x2)
AppleTalk lookup has completed ...
there are NO appletalk zones
thanks again for your interest and help.
Mac OS X (10.4.8)

I have a macbook pro and aphotosmartD110 wireless printer. I was told that if I install the printer software on my computer, it will no longer print wirelessly. Is that true and how do I scan wirelessly without loading in the software?

I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

I am having problem with trying to install the printer with wireless connection.i have windows 7

the blue light on top of the printer blinks very fast and intermitenly. i cannot install the printer with wireless. I tried with the CD that came with the printer but the green install bar just stops and freezes. I have a 4 month old Dell laptop. Printer just purchased from HP is Laser Jet Professional P1102w.

Are there any third party firewalls installed (e.g. Kaspersky, Norton, BitDefender, etc.)? It sounds like something is blocking the software and third party firewalls have been known to block communication with the printer.
How far in the installation process do you get (what options are you able to get to)?
Is the USB cable connected at the start of the installation?
Do you receive any errors at all? If so, what are they?
Have you tried using Smart Install? Smart Install works by connecting the USB cable to the computer. By default, you should get a prompt to run a file. Running this file starts the Smart Install process.
This video is a good guide to Smart Install.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Installing HP Photosmart B210 (network) fails - posts error 'The Printer Installation Failed'

Hi - I have an HP Pavilion Elite HPE on a home network containing a wireless HP Photosmart B210 printer/scanner. This setup has been working for >1.5 years, then about 2 wks ago, I couldn't print from any application. Win7 would post 'cannot communicate with printer'. Here is what I've done:
1) uninstalled - reinstalled driver SW multiple times - however, Win7 posts 'The Printer installation failed' at the end of installation.
2) The HP print and scan doctor finds the wireless printer - but finds no faults or issues. All green check marks
3) I copied/pasted the webpage address into IE - in the Embedded Webserver home tab it states 'System Error - Network connection error.
4) scanning works fine wirelessly and if I connect the printer via USB cable - I can print.
5) I have a Lenovo desktop and Ipad on my network that prints wireless - so it appears the issue is with the Elite HPE only and not the router.
6) If i'm in Excel and select find printer - i get the error 'The active directory domain services is currently unavailable'
7) I checked the printer spooler and it is started and set to Automatic.
I want to keep the ability to print wirelessly, however, if I can't fix this, i'll have to permanently connect using USB. Any suggestions on what is wrong? Thanks, Rob
This question was solved.
View Solution.

Try the Windows system file checker to see if your operating system has corrupt or otherwise damaged files.. The Command line windows needs to have admin priveleges. The following images are from my Windows 7 desktop, but Vista is virtually the same.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

Turn the printer off.

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 2544 does it work on usb & wireless and will it install on widows 7

HP 2544 does it work on usb & wireless and will it install on widows 7

Hi williegriffith,
Yes, the Deskjet 2544 will work both wirelessly and with a USB connection.
This printer will also work with Windows 7. You can download the software here if you would like; HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers, use the CD that comes with it, or use the HP Print install Wizard.
The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP LaserJet Professional P 1102w. Do I have to install the printer(wificonfig. eatch time?

HP LaserJet Professional P 1102w. Do I have to install the printer ( wificonfig.exe ) eatch time for printing from different wlan networks?More spefisic:
On my computer I have to run wificonfig.exe eatch/every time I have changet wlan networek. I have install from wificonfig.exe for all my wlan netwok,eatch at time, but when I log into one of the wlan network, the printer only working from the last network I war running wificonfig.exe.
I have 3 printers of HP LaserJet Professional P 1102w. installed on my pc. One printer for one wlan netwoek, totally 3 wlan networkd and 3 printers for eatch netwoek.
But, when change netwoek and try print from that netwoek, I cant print out..than I again have to install with wificonfig.exe AGAIN...and that I have done many time before
So for me it seems that I have to install with wificonfig.exe every time I change wlan network although I have dome i many times before on the same network.
My qustieon:
Do i have to run wificonfig.exe eatch time I change wlan network? I have tryed to install wificonfig.exe many times on all my wlan network ( 3 wlan networks and maked 3 printers in controllpanel with 3 different networks ) (and maked my printer spesific for eatch netwoek...but the printer just printing from the last networek I runned wificonfig.exe on...
I would like it if I can be loggen into netwoek aAand run pringter A, and when I log into network B I will use printer B, and log into netwoek C use printer C. But hat dont works..feks. if I just have printet out from netwoek A with printer A, and than change netwoek to network B and try printing with printer B, it not woek..than I have to run wificonfig.exe AGAIN on netwoek B for get printer to woek...and whe I change back to netwoek A again..and try print out from printer A...I have to run wificonfig.exe again...
Difficult to explain this in text..but I hope someone understand what I mean
How can I get my printer to work every time I are inlogged to network A and will use printer A, network B and use printer B, and netwoek C and use printer C..without installing from wificonfig.exe every time I have changed network?
Regards
Rolf
[Edited for Personal Information]

Try here...
Replacing your wireless router
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
REinstall the printer from scratch if needed.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason

TS4062 I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Opt

I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?

Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)?

Windows failed to install the following update with error 0x80070005

Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-us

Okay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Failed to Install the Printer either USB, Wireless and Ethernet

Similar Messages

Maybe you are looking for