Failed to preload 'sap.m.routing.library-preload':

Hi,
I am working on developing a Fiori like application using SplitApp. Wanted to have the navigation using the sap.m.Routing.
I get the below error:
I have the following in the Index.html
<script src="resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m,sap.m.routing"
data-sap-ui-theme="sap_bluecrystal">
</script>
Appreciate your help....!

Now i have different error message:
failed to load 'sap/m/routing/Routemacthedhandler.js' from resources/sap/m/routing/Routemacthedhandler.js: 404 - NOT FOUND

Similar Messages

[ERROR] - Runtime Shared Library Preloading Warning

Hey there guys, I have a question that probably has a very easy answer, but after searching online for a while I couldn't figure out just how to fix it.
Anyways the problem is this, when I run it, it gives me this warning and then the when i click "OK" it startes playing the movie..but when i upload the content i dont see it woking
I assume I'm receiving this warning because I'm using Adobe Flash Professional CS5 if this helps.
Thanks very much for any advice you guys have.
-=-=-=-=-=-=-=-
The warning:
Runtime Shared Library Preloading Warning
Your content will not stream. Runtime Shared Library (RSL) preloading will require all of your content to download before the first frame will play.
To prevent this you can chane the Runtime Shared Library Library Settings in the Advanced ActionScript 3.0 Settings dialog which can be raised from the Publish Settings dialog.
The Runtime Shared Libraries being preloaded are:
textLayout_1.0.0.595.swz for TLF Text

Since my presentation requires hiding a text field behind "revealer bars", unlayering was not going to make it in my situation. By some kind of good fortune I had another FLA file that behaved properly. I found that it had the "Merge with code" switch set, but making that change to my current file did not correct the problem. It appears that the flash data base became corrupted and I had to re-build the entire file from scratch.
Here is something that hints ( but doesn't admit ) that you can corrupt the fla file:
Home / Using Flash Professional CS5 / Text
Working with Text Layout Framework (TLF) text
Converting between Classic and TLF text
When you convert a text object from one text engine to the other, Flash preserves most of the formatting. However, because the text engines are different in their capabilities, some formatting may be slightly different, including letter spacing and line spacing. Inspect the text carefully and reapply any settings that have been changed or lost.
If you need to convert text from Classic to TLF, try to do so only once rather than converting back and forth more than once. The same is true for converting TLF text to Classic text.
When converting between TLF and Classic text, Flash converts text types as follows:
TLF Read Only> Classic Static
TLF Selectable > Classic Static
TLF Editable > Classic Input
Until I become very certain that I am on the right path, I am saving a new sub-version of the file after every small advance in the restoration. If something I go breaks the "streamability", I Quit without saving then start up again with the last successfully saved version. ( I haven't yet found the "Revert to Last Saved State" menu pick. )
Hope this helps.

Loading jperflib failed. jperflib (Not found in java.library.path)

Please:
We are working with SAP Netweaver EHP1 7.0, Red Hat Enterprise Linux 5, Oracle 10g,
SAP Application Server JAVA/Oracle, Central System
Java versión installed IBMJava2-amd64-142
java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20100916a (JIT enabled)
J9VM - 20100914_64612_LHdSMr
JIT - 20090210_1447ifx2_r8
GC   - 200902_24)
step 23 de 37: Configure UME:
Message error:
INFO 2010-11-19 20:04:41.532
Output of /opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/
CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.s
ap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/tools/iaik_jce.ja
r:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/global/security/l
ib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/BJD/
SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/ins
tall/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/oracle/client/10x_
64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/BatchConfig.xml i
s written to the logfile batchconfig.log.
WARNING 2010-11-19 20:04:43.908
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW
701/AS-JAVA/ORA/CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.Offlin
eToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/t
ools/iaik_jce.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/g
lobal/security/lib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.j
ar:/usr/sap/BJD/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA
/ORA/CENTRAL/install/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/or
acle/client/10x_64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/B
atchConfig.xml" finished with return code 183. Output:
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h).
hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
WARNING[E] 2010-11-19 20:04:43.909
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of log file batchconfig.
log: '
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h)
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration. '.
ERROR 2010-11-19 20:04:44.7
FCO-00011 The step runBatchconfig with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_S
ystem|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i
nd|ind|ind|ind|5|0|runBatchconfig was executed with status ERROR
Thanks for your comments nad suggestion

good afternoon:
the error loading jperflib failed. jperflib (Not found in java.library.path) is fixed,
Solution: LD_LIBRARY_PATH=/sapmnt/SID/exe
but other error appear
/usr/sap/BJD/JC01/j2ee/admin/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/admin/cfg/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/dplOptions.options doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/configtool/config.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/rdb.properties doesn't exist and will be created by batchconfig.
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.NameNotFoundException: A property with the name "java.parameters" cannot be found in the PropertySheet "cluster_data/server/cfg/element-info.ID139743".
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.<init>(PropertyEntryImpl.java:85)
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.readPropertyEntry(PropertyEntryImpl.java:54)
        at com.sap.engine.core.configuration.impl.addons.PropertySheetImpl.getPropertyEntry(PropertySheetImpl.java:127)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.setElementInfoProperties(ElementInfoTask.java:243)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.go(ElementInfoTask.java:184)
        at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:60)
        at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:98)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)

SAPGUI 7.20 installer script in Lion fails to create SAP folder in Pref

I have an issue in which the the SAPGUI for Mac installer/script is failing to created tge SAP folder in Hard drive /Library/Preferences folder as in does in Snow Leopard. When I use my Applescript later to move the connection files to the preferences folder, it fails because the SAP folder was not created by the SAPGUI installer script. It looks like Apple has increased security on the Preferences folder since I'm being prompted to delete any file in the Preferences folder or subfolders.
I using PlatinGUI720MacOSX_6-10006059.JAR (version 720.6)
I've tried to modify my applescript to create the SAP folder in Hard drive/Library/Preferences but have not been successfully and also a bit concerned about where else the install script behaves differently in Lion compared to Snow Leopard.

Hi, not we not have opened note for the issue.
we check, open note in oss.
Thank you.

My hard drive failed. How do I restore library on a new hard drive?

My hard drive failed. How do I restore library on a new hard drive?
Thanks.

if music was purchased in itunes you can restore as for cd's well if in ipod go here http://www.getsharepod.com/

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

Installation Error - SAP Unicode RFC Library Not Found

Out of approxoimately two dozen successful client installations of the BObj Integration Kit for SAP Solutions (SP2), I have one user who gets this error: "The SAP Unicode RFC Library could not be found. This library is available as a part of the SAP Frontend, which is a pre-requisite for the installation of this software. Please install 'Unicode RFC Libraries' feature in SAP GUI Installer 710 installer, then re-run this setup."
The problem is that this user is running the exact same Integration Kit installation on top of the the exact same SAPGUI installation that has generated successful results for all other client installs on our team. Why would this probelm be happening for one particular user? (Problem is happening on a Windows XP client system, but as I've mentioned, all other installs on a Windows XP client have been fine.)
I've reviewed OSS Note 1372466, but it indicates that the problem resides on the SAPGUI server side. Regardless, I have only one client generating this error out of many what appeared to be identical clients that installed successfully.
Any ideas would be much appreciated.
Thanks,
Josh

Thanks, Ingo. A missing librfc32u.dll file seemed to be the problem. Interestingly, the problematic client had this dll in a couple of places, but not in the c:\WINDOWS\System32 directory. Why that dll wasn't in the right place for one particular client is a question for a different forum.
Thanks,
Josh

BW output into PDF through ADS or The SAP BI Export Library

Dear fellow gurus,
I would like to meet somebody who has any experience with Adobe forms for BI/ BW.
My colleagues are struggling with some performance problem on their BW project, where they want the ADS (adobe document services for adobe forms output) to print 400 pages for them. I don´t think that is a good idea (bad design, but I cannot do anything about it) but would like to help them.
They think SAP Note 1112132 (The SAP BI Export Library) could help, I don´t see the point. Looks like this tool is not quite "ready" for the use. And if I would like to use something like that, I would write that myself using iText or something. But I would like to hear some opinions first, before I will tell them anything.
Maybe there is something special for PDF reporting for BW? Or any BW + Adobe guidelines? Or anything relevant for me to read to get the idea?
Thank you, Otto

Didn´t find any solution/ opinion/ experience. Closing. Otto

Visualizing SAP XI routing configuration across the system landscape

Hi Experts
Iam facing some challenges in visualizing SAP XI routing configuration across the system landscape (Development, Quality, Production). Basically routing is based on a field (technical target system). Depending on the environment we have different target systems (different Mainframe DB that represent the same target system) configured.
Any word/excel/ppt/pdf templates or any comments that could help visualizing routing would be highly appreciated.
Thanks! Santosh

Hi Santhosh,
If you are worrieed about how your Business Systems will change when you move from Dev to QA to PROD for the Configuration in your ID, then the answer is simple.
You can create transport target for your Business System and so when you migrate the ID objects from dev to Qa and so on, the business Systems will be automatically replaced.
Take a look at this blog,
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Regards,
Bhavesh

Mitigation control: Sending failed No valid SAP sender address

GRC 5.3 SP10 RAR
In mitigation control: I have created a new control ID. When I am trying to assign it to a user getting error
"Sending failed No valid SAP sender address"
Please advise to resolve the issue. I need to mitigate user.

Hello Pal,
Please go to RAR configuration -> Risk Analysis -> Additional Options. Here check if you have the parameter Enable Monitor Notification set to YES. If you do then set this one to NO. Also, kindly check and make sure that you have a valid email address maintained for each of the mitigation control monitor in Mitigation tab.
If you wish to have the parameter set to yes only then you need to do the JAVA mail settings in Visual Admin. Check configuration of the JAVA mail client, which can be done using Visual Administrator, to send the Email Notification.
(Configuration > Java Mail Client > Properties > Smtp).
Regards, Varun
Edited by: Thakur Varun on May 21, 2010 3:47 PM

PDK 6.0 SP3 deployment failed on com.sap.pct.pdk.pct.epa

Hello,
I am trying to deploy Portal Development Kit 6.0 SP3 on WAS 6.40 (J2EE
6.30) with EP 6.0 SP3 and it is failing on the last package with the
error below. It is HP-Unix 11i system and the same PDK file
(20040506.sca) was used with no issues on Windows based WAS and EP same
releases.
Please, advise.
Vladimir
04/08/06 17:51:47 - Start updating archive file...
04/08/06 17:51:47 - Archive file updated successfully for 102ms.
04/08/06 17:51:47 - Start deploying ...
04/08/06 17:51:48 - Archive file uploaded to server for 327ms.
04/08/06 17:52:02 - ERROR: Not deployed. Deploy Service returned
ERROR:
java.rmi.RemoteException: Cannot deploy
application sap.com/com.sap.pct.pdk.pct.epa..
Reason: <--Localization failed:
ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle',
ID='Exception while deploying:
com.sap.portal.transport.deploy.IncompleteDeploymentException: The
archive ./temp/deploy/work/deploying/com.sap.pct.pdk.pct.epa.epa could
not be deployed completely. Import failed for 2 of 13 objects.
[Unexpected exception during import.
[com.sapportals.portal.transport.EptFile]<init>:
transport file not
found: /usr/sap/HP1/JC00/j2ee/temp/pcd/transport/IMPORT-
0806_175148_720_97add7f324f87b25/EPT/com.sap.pct.pdk.personalizationexam
ple.ept, Unexpected exception during import.
[com.sapportals.portal.transport.EptFile]<init>:
transport file not
found: /usr/sap/HP1/JC00/j2ee/temp/pcd/transport/IMPORT-
0806_175148_720_97add7f324f87b25/EPT/com.sap.pct.pdk.WebDynpro.ept, ]',
Arguments: []--> : Can't find resource for bundle
java.util.PropertyResourceBundle, key Exception while deploying:
com.sap.portal.transport.deploy.IncompleteDeploymentException: The
archive ./temp/deploy/work/deploying/com.sap.pct.pdk.pct.epa.epa could
not be deployed completely. Import failed for 2 of 13 objects.
[Unexpected exception during import.
[com.sapportals.portal.transport.EptFile]<init>:
transport file not
found: /usr/sap/HP1/JC00/j2ee/temp/pcd/transport/IMPORT-
0806_175148_720_97add7f324f87b25/EPT/com.sap.pct.pdk.personalizationexam
ple.ept, Unexpected exception during import.
[com.sapportals.portal.transport.EptFile]<init>:

Apparently, there is a bug in the .sca file that prevents it from deployment on UNIX servers.
SAP is working on the patch, but meantime we can use the following workaround:
unzip the .sca file
unzip the com.sap.pct.pdk.pct.epa.epa from the .sca
Copy all .ept files contained into the WebAS folder <(>
<<)>WASROOT>/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcdcontent
restart the server.
Regards,
Vladimir

What can I do? Every "iPhoto Library Upgrader" I've downloaded fails to prepare the my iPhoto Library, so I can't open iPhoto any more.

What can I do? Every time I download & run "iPhoto Library Upgrader" it fails to "prepare" the my iPhoto Library, so I can't open iPhoto any more.
(My MacOS & iPhoto are the latest versions.)
Ever since my last upgrades, every time I try to open iPhoto, a Alert box pops up saying, "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader", and it gives 2 options: a "Learn More" button or "Quit" (iPhoto) button. The "Learn More" button links to Apple's "iPhoto '11: About the Library Upgrader" page (http://support.apple.com/kb/HT5037), but whenever I then download and run that page's linked app, the same thing happens all over again.
It does no good to rebuild the iPhoto Library (holding down the command & option keys while reopening iPhoto): the same thing happens.
It does no good to use iPhoto Library Manager (http://www.fatcatsoftware.com/iplm/) to rebuild the iPhoto Library, as was suggested elsewhere: the same thing happens.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Where can I download the sap.viz chart library?

Hi,
I develop a web software with using sap.ui.communs, sap.ui.table, sap.ui.core and sap.viz chart libraries.
I found where I can download sap.ui.communs, sap.ui.table, sap.ui.core libraries to perform my software (OpenUI5 - Download)
But there's no sap.viz chart library... so for the moment I have to use in my page html this javascript code:
src="https://sapui5.netweaver.ondemand.com/resources/sap-ui-core-nojQuery.js"
I would like to use a local src and not a online src... so where can I download the sap.viz chart library (without jquery)?
Best regards
Yannick

Hi Yannick
UInfortunately, this is posted in an incorrect SCN Topic Space. Before posting, always check the Overview of the Sapce to see what it covers. E.g.; this Space:
To find the best Space for your query, please see the SCN Site Index
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway fa

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

Error - failed to load 'sap/m/columns.js'

Hi,
I'm getting the following error as soon as I add <columns> tag inside a <Table> tag. Error:
Uncaught Error: failed to load 'sap/m/columns.js' from resources/sap/m/columns.js: 404 - Not Found
Here is main.view.xml:
<mvc:View
controllerName="com.ttf.orgoto.view.main"
xmlns:l="sap.ui.layout"
xmlns:mvc="sap.ui.cores.mvc"
xmlns:html="http://www.w3.org/1999/xhtml"
xmlns="sap.m">
<Page title="Organizasyon Otomasyonu">
<content>
<IconTabBar>
<items>
<IconTabFilter
                        icon="sap-icon://retail-store"
                        text="Mekan Seçimi">
<Table id="placeTbl" >
<headerToolbar>
<Toolbar>
<Label text="Mekan Seçimi"></Label>
</Toolbar>
<columns>
</columns>
</headerToolbar>
</Table>
</IconTabFilter>
<IconTabFilter
                        icon="sap-icon://meal"
                        text="Sipariş Seçimi">
<Text text="Info content goes here ..." />
</IconTabFilter>
</items>
</IconTabBar>
</content>
</Page>
</mvc:View>
Here is index.html:
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
<script src="resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m,sap.ui.table"
data-sap-ui-xx-bindingSyntax="complex"
data-sap-ui-resourceroots='{"com.ttf.orgoto": "./"}'
data-sap-ui-theme="sap_bluecrystal">
</script>

<script>
sap.ui.localResources("view");
var app = new sap.m.App({initialPage:"idmain"});
var page = sap.ui.view({id:"idmain", viewName:"com.ttf.orgoto.view.main", type:sap.ui.core.mvc.ViewType.XML});
app.addPage(page);
app.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>

You're adding the <columns> aggregation within the <headerToolbar>. It can be added after </headerToolbar>.
https://sapui5.hana.ondemand.com/sdk/explored.html#/sample/sap.m.sample.Table/code
- Sakthivel

Failed to preload 'sap.m.routing.library-preload':

Similar Messages

Maybe you are looking for