Failed to start ASM instance "+ASM1" on node "rac1"
I have a problem, because when I start RAC and write command crs_stat -t
column State have 2 wrong parameter..
Name Type Target State Host
ora.....CRM.cs application ONLINE ONLINE rac2
ora....db1.srv application ONLINE ONLINE rac2
ora.devdb.db application ONLINE ONLINE rac2
ora....b1.inst application ONLINE OFFLINE
ora....b2.inst application ONLINE ONLINE rac2
ora....SM1.asm application ONLINE UNKNOWN rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2
When I try
srvctl start asm -n rac1 then is wrong:
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
[PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
and when I try start instance manualy then
PRKP-1001 : Error starting instance devdb1 on node rac1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.devdb.devdb1.inst' has placement error.
:( Where is my problem??
hi, i have exactly the same error
but your suggestions of remove an recreate the asm resource not working
./srvctl remove asm -n dbs2 -i +ASM2 -f
PRKS-1023 : Failed to remove CRS resource for ASM instance "+ASM2" on node "dbs2", [CRS-0214: Could not unregister resource 'ora.dbs2.ASM2.asm'.]
./srvctl start asm -n dbs2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
[PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
how do i proceed?
iam using solaris 10 with t2000 and t5210 server and oracle 10.2.0.4
Similar Messages
-
ASM instance on one node can not startup
use dbca create database failure
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log" for further details.
[oracle@rac1 ~]$ cat "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log"
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]
ORA-03135: connection lost contact
[oracle@rac2 bin]$ ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE OFFLINE
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2so i try to start asm instance on rac2
[oracle@rac2 bin]$ ./srvctl start asm -n rac2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:
CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]]
[PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:check the alert log find
Mon Jul 25 17:58:23 2011
Maximum Tranmission Unit (mtu) of the ether adapter is different
on the node running instance 1, and this node.
Ether adapters connecting the cluster nodes must be configured
with identical mtu on all the nodes, for Oracle.
Please ensure the mtu attribute of the ether adapter on all
nodes are identical, before running Oracle.
Mon Jul 25 17:58:23 2011
Errors in file /opt/ora/admin/+ASM/bdump/+asm2_lmon_29711.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
LMON: terminating instance due to error 27550
Mon Jul 25 17:58:25 2011
Shutting down instance (abort)
License high water mark = 0
Mon Jul 25 17:58:28 2011
Instance terminated by LMON, pid = 29711
Mon Jul 25 17:58:30 2011
Instance terminated by USER, pid = 29831and i checked my eth
[root@rac1 oracle]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
inet addr:192.168.40.102 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9762 errors:0 dropped:0 overruns:0 frame:0
TX packets:6028 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1193646 (1.1 MiB) TX bytes:1037252 (1012.9 KiB)
Interrupt:67 Base address:0x2400
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
inet addr:192.168.40.201 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:67 Base address:0x2400
eth1 Link encap:Ethernet HWaddr 00:0C:29:3C:42:16
inet addr:10.10.17.221 Bcast:10.10.17.225 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30185 errors:0 dropped:0 overruns:0 frame:0
TX packets:37936 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19988844 (19.0 MiB) TX bytes:35126056 (33.4 MiB)
Interrupt:51 Base address:0x2480
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:52537 errors:0 dropped:0 overruns:0 frame:0
TX packets:52537 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4380651 (4.1 MiB) TX bytes:4380651 (4.1 MiB)
[root@rac2 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
inet addr:192.168.40.103 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3665 errors:0 dropped:0 overruns:0 frame:0
TX packets:1489 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:563952 (550.7 KiB) TX bytes:243127 (237.4 KiB)
Interrupt:67 Base address:0x2400
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
inet addr:192.168.40.202 Bcast:192.168.40.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:67 Base address:0x2400
eth1 Link encap:Ethernet HWaddr 00:0C:29:9C:CC:9A
inet addr:10.10.17.222 Bcast:10.10.17.225 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38281 errors:0 dropped:0 overruns:0 frame:0
TX packets:29683 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:35182270 (33.5 MiB) TX bytes:19905266 (18.9 MiB)
Interrupt:51 Base address:0x2480
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:44387 errors:0 dropped:0 overruns:0 frame:0
TX packets:44387 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2299383 (2.1 MiB) TX bytes:2299383 (2.1 MiB)any idea ?
i try to run dbca on rac2 ,it seems OK
============
ASM instance still have problem,no ASM instance create in rac1
[oracle@rac2 bin]$ ./crs_stat -t
Name Type Target State Host
ora.mydb.db application ONLINE ONLINE rac1
ora....b1.inst application ONLINE OFFLINE
ora....b2.inst application ONLINE ONLINE rac2
ora....SM1.asm application ONLINE OFFLINE
ora....C1.lsnr application ONLINE ONLINE rac1
ora....C2.lsnr application ONLINE OFFLINE => ora.rac1.LISTENER_RAC2.lsnr (i do not know where this resource come from ??)
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2and here is my dbca.rsp file content
[GENERAL]
RESPONSEFILE_VERSION = "10.0.0"
OPERATION_TYPE = "createDatabase"
[CREATEDATABASE]
GDBNAME = "mydb.us.oracle.com"
SID = "mydb"
NODELIST=rac1,rac2
TEMPLATENAME = "/home/oracle/mydb.dbc"
SYSPASSWORD = "Myss123456"
SYSTEMPASSWORD = "Myss123456"
EMCONFIGURATION = "NONE"
DBSNMPPASSWORD = "Myss123456"
STORAGETYPE=ASM
DISKLIST=/dev/oracleasm/disks/VOL1,/dev/oracleasm/disks/VOL2
DISKGROUPNAME=ORADG
REDUNDANCY=EXTRENAL
DISKSTRING="/dev/oracleasm/disks/*"
ASM_SYS_PASSWORD="Myss123456"
LISTENERS = "listener1 listener2"Edited by: 859340 on 2011-7-24 下午7:23
Edited by: 859340 on 2011-7-24 下午7:32
Edited by: 859340 on 2011-7-24 下午7:35
Edited by: 859340 on 2011-7-24 下午7:51Hi,
Use this tech note on MOS.
*Instance Crash on startup with ORA-27550: Target ID protocol check failed [ID 730516.1]*
Regards,
Levi Pereira -
Problem starting ASM instance after installing Oracle Grid standalone
Hi!
After installing Oracle Grid 11gr2 and rebooting my machine:
Linux localhost.localdomain 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
I run asmca command and it failed to startup ASM instance, I tried to paste the log but it's too long!
Could someone help me please! thank you very much!
José
I paste just the last piece:
+[main] [ 2012-03-15 15:01:56.853 CET ] [SQLEngine.initialize:354] m_bReaderStarted: false+
+[main] [ 2012-03-15 15:01:56.857 CET ] [SQLEngine.initialize:358] Starting Reader Thread...+
+[main] [ 2012-03-15 15:01:56.919 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine+
+[main] [ 2012-03-15 15:01:56.919 CET ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null+
+[main] [ 2012-03-15 15:01:56.927 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS+
+[main] [ 2012-03-15 15:01:56.927 CET ] [OracleHome.getVersion:896] Homeinfo /u01/app/grid/product/11.2.0/grid,1+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.loadLibrary:308]+
Inside constructor of OCR
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.isCluster:939] Calling OCRNative for isCluster()+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:943] OCR Result status = true+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:955] Bolean result = false+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.931 CET ] [MessageBundle.getMessageFields:338] MessageBundle.getMessage() failed to load the string PRKC-PRKC-1036 : CRS_HOME name passed to the method was null Exception: java.util.MissingResourceException: Can't find resource for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036 : CRS_HOME name passed to the method was null+
+[main] [ 2012-03-15 15:01:56.931 CET ] [ClusterUtils.getCRSActiveVersion:1797] Error getting CRS active version: PRKC-PRKC-1036 : CRS_HOME name passed to the method was null : <null>+
+[main] [ 2012-03-15 15:01:56.931 CET ] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
+[main] [ 2012-03-15 15:01:57.084 CET ] [UsmcaLogger.logInfo:141] Role SYSASM+
+[main] [ 2012-03-15 15:01:57.085 CET ] [UsmcaLogger.logInfo:141] OS Auth true+
+[main] [ 2012-03-15 15:01:57.182 CET ] [SQLEngine.done:2148] Done called+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available+
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:333)
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logInfo:141] ASM failed to start. Check /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for details.+Hi,
i've got similar problem but my asm is not just down. After installing grid home with infrastructure I've restarted os and there is no crs services and the only result from this command:
# ps -ef | grep grid
grid 2075 1 0 13:58 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
root 2463 2439 0 14:06 pts/0 00:00:00 grep gridgive me opposite to this one before restart:
$ ps -ef | grep grid
grid 2076 1 0 13:01 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid 3646 1 0 13:44 ? 00:00:04 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid 3806 1 0 13:45 ? 00:00:02 /u01/app/grid/product/11.2.0/grid/bin/oraagent.bin
grid 3820 1 0 13:45 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmd.bin
grid 3853 3820 0 13:45 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmlogger.bin -o /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.info -l /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.log
root 3879 2307 0 13:46 pts/0 00:00:00 su - grid
grid 3881 3879 0 13:46 pts/0 00:00:00 -bash
grid 4172 1 0 13:48 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/cssdagent
grid 4197 1 0 13:48 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ocssd.bin
grid 4550 1 0 13:49 ? 00:00:00 asm_pmon_+ASM
grid 4552 1 0 13:49 ? 00:00:00 asm_psp0_+ASM
grid 4554 1 0 13:49 ? 00:00:02 asm_vktm_+ASM
grid 4558 1 0 13:49 ? 00:00:00 asm_gen0_+ASM
grid 4560 1 0 13:49 ? 00:00:00 asm_diag_+ASM
grid 4562 1 0 13:49 ? 00:00:00 asm_dia0_+ASM
grid 4564 1 0 13:49 ? 00:00:00 asm_mman_+ASM
grid 4566 1 0 13:49 ? 00:00:00 asm_dbw0_+ASM
grid 4568 1 0 13:49 ? 00:00:00 asm_lgwr_+ASM
grid 4570 1 0 13:49 ? 00:00:00 asm_ckpt_+ASM
grid 4572 1 0 13:49 ? 00:00:00 asm_smon_+ASM
grid 4574 1 0 13:49 ? 00:00:00 asm_rbal_+ASM
grid 4576 1 0 13:49 ? 00:00:00 asm_gmon_+ASM
grid 4578 1 0 13:49 ? 00:00:00 asm_mmon_+ASM
grid 4580 1 0 13:49 ? 00:00:00 asm_mmnl_+ASM
grid 4582 1 0 13:49 ? 00:00:00 oracle+ASM (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid 6128 1 0 13:52 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 6142 3881 0 13:53 pts/0 00:00:00 ps -ef
grid 6143 3881 0 13:53 pts/0 00:00:00 grep grid
$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): pc
$ srvctl status asm
ASM is running on pcI'm using 2x 1TB hdisk as 2 pv in one vg. I thought that lvolume permissions are incorrect but now I had:
# ls -l /dev | grep dm
crw-rw---- 1 root root 10, 61 May 16 13:57 cpu_dma_latency
brw-rw---- 1 root disk 253, 0 May 16 13:57 dm-0
brw-rw---- 1 root disk 253, 1 May 16 13:57 dm-1
brw-rw---- 1 grid asmadmin 253, 10 May 16 13:57 dm-10
brw-rw---- 1 grid asmadmin 253, 11 May 16 13:57 dm-11
brw-rw---- 1 grid asmadmin 253, 12 May 16 13:57 dm-12
brw-rw---- 1 grid asmadmin 253, 13 May 16 13:57 dm-13
brw-rw---- 1 grid asmadmin 253, 2 May 16 13:57 dm-2
brw-rw---- 1 grid asmadmin 253, 3 May 16 13:57 dm-3
brw-rw---- 1 grid asmadmin 253, 4 May 16 13:57 dm-4
brw-rw---- 1 grid asmadmin 253, 5 May 16 13:57 dm-5
brw-rw---- 1 grid asmadmin 253, 6 May 16 13:57 dm-6
brw-rw---- 1 grid asmadmin 253, 7 May 16 13:57 dm-7
brw-rw---- 1 grid asmadmin 253, 8 May 16 13:57 dm-8
brw-rw---- 1 grid asmadmin 253, 9 May 16 13:57 dm-9and:
# ls -l /dev/vg_main/
total 0
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol1 -> ../dm-2
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol10 -> ../dm-11
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol11 -> ../dm-12
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol12 -> ../dm-13
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol2 -> ../dm-3
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol3 -> ../dm-4
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol4 -> ../dm-5
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol5 -> ../dm-6
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol6 -> ../dm-7
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol7 -> ../dm-8
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol8 -> ../dm-9
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol9 -> ../dm-10
lrwxrwxrwx 1 root root 7 May 16 13:57 lv01_swap -> ../dm-1
lrwxrwxrwx 1 root root 7 May 16 13:57 lv02_root -> ../dm-0I've used search path for ams disks as /dev/dm* and /dev/vg_main/asm* and seen all of them in both configurations.
I've tried to reconfigure HAS through (as root):
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
$GRID_HOME/root.shthis gave me working asm instance but after restart I'm in base position with no crs services.
And... I've tried to startup crs after restart with no luck but before restart I can shutdown everything and startup ASM instance too (so everything is fine till the reboot). I'm on CentOS 6:
$ uname -a
Linux pc 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \mAny hints about how to resolve this problem would be most welcome.
Regards. -
Can there be multiple ASM instances on single node?
Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob -
Multiple ASM Instances on single node
Hi All,
After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
Thanks,Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems. -
Getting errors while starting ASM instance in 11gR2
Hi All,
While starting ASM instance, i'm getting the following errors.
[grid@xxxxx ~]$ . oraenv
ORACLE_SID = [+ASM2] ?
The Oracle base has been set to /u01/app/oracle
[grid@xxxxx ~]$ sqlplus "/ as sysasm"
SQL*Plus: Release 11.2.0.3.0 Production on Thu May 3 05:23:52 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected.
SQL> cl scr
SQL> shut immediate
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 32 bytes of shared memory ("shared pool","unknown object","KGLH0^37a71565","kglHeapInitialize:temp")
Please give me any suggestions?
--Thanks,http://ora-04031.ora-code.com/
ORA-04031:
unable to allocate string bytes of shared memory ("string","string","string","string")
Cause: More shared memory is needed than was allocated in the shared pool.
Action: If the shared pool is out of memory, either use the dbms_shared_pool package to pin large packages, reduce your use of shared memory, or increase the amount of available shared memory by increasing the value of the INIT.ORA parameters "shared_pool_reserved_size" and "shared_pool_size". If the large pool is out of memory, increase the INIT.ORA parameter "large_pool_size". -
ASM instances on 2 node Oracle RAC 10g r2 on Red Hat 4 u1
Hi all
I'm experiencing a problem in configuring diskgroups under +ASM instances on a two node Oracle RAC.
I followed the official guide and also official documents from metalink site, but i'm stuck with the visibility of asm disks.
I created fake disks on nfs with Netapp certified storage binding them to block device with the usual trick "losetup /dev/loopX /nfs/disk1 " ,
run "oracleasm createdisk DISKX /dev/loopX" on one node and
"oracleasm scandisks" on the other one.
With "oracleasm listdisks" i can see the disks at OS level in both nodes , but , when i try to create and mount diskgroup in the ASM instances , on the instance on which i create the diskgroup all is well, but the other one doesn't see the disks at all, and diskgroup mount fails with :
ERROR: no PST quorum in group 1: required 2, found 0
Tue Sep 20 16:22:32 2005
NOTE: cache dismounting group 1/0x6F88595E (DG1)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DG1 was not mounted
any help would be appreciated
thanks a lot.
AntonelloI'm having this same problem. Did you ever find a solution?
-
Error while starting ASM instance
when i was trying to startup my ASM database , i was getting the following error.
SQL> startup
ASM instance started
Total System Global Area 125829120 bytes
Fixed Size 2019000 bytes
Variable Size 98644296 bytes
ASM Cache 25165824 bytes
ORA-15032: not all alterations performed
ORA-15003: diskgroup "DBDATA" already mounted in another lock name space"
thnx in advanceHi,
i was not aware of ASM anymore, i can give some more details of this.
There was already an instance named +ASM in the host, which has the diskgroup 'DBDATA' created.
But now i have created a new instance and i was trying to connect to the same diskgroup.
I dont have permission of the root, but i have the oracle login.
could u pleaze help me in this regard...
i need to connect to the diskgroup, if i try to stop the other instance, i was not getting the error, but the diskgroup is getting dis-mounted.
thnx alot for the replies -
How to start ASM instance at boot time - RHEL 2.1
Oracle 10.1.0.3
RHEL 2.1
I'm not able to get the ASM instance (not RAC) to start at boot time. It seems that the ocssd daemon does not finish starting until after all rc* scripts, including rc.local, have finished executing.
Patch 3458327 includes a new dbstart with header notes that are in conflict. The notes says that dbstart can't be used to start ASM until AFTER all rc* is finished. Then it continues and states that ASM instance startup should be put in rc.local.
As soon as I get logged on, a ps -ef|grep ocssd shows the daemon running. I can then manually start the ASM instance. There must be a way to get the ASM instance "auto" started at boot time.
Ideas?The cheapest and administratively easiest way for me was to start Oracle instances (ASM and data) by "at" command :-) from rc scripts. Something like:
....echo "oracle start" | at now+2min....
Additionally the deferred startup has some additional advantages in my environment, so I am not motivated to look for better solution.
Best regards,
Pavel -
Would oracle start ASM instance automatically?
Hi there,
I experienced this yesterday while testing my scripts.
I wrote couple of unix shell scripts (OEL) - one to shutdown all DBs (which, at the end shuts down the ASM instance as well) and the second one to start all the DBs.
In the second one, I forgot to inclde the commands to startup the ASM instance first and executed the script. I noticed there were no errors during the DB startup (which included the DB that uses ASM) and when I checked the output of "ps -ef | grep pmon", +ASM instance was already up and running.
So the ASM instance was started up automatically - I wonder if this is how it should be?
If this is normal, should I forget about adding ASM instance startup commands to the second shell script?
Regardsuser12033597 wrote:
Hi there,
I experienced this yesterday while testing my scripts.
I wrote couple of unix shell scripts (OEL) - one to shutdown all DBs (which, at the end shuts down the ASM instance as well) and the second one to start all the DBs.
In the second one, I forgot to inclde the commands to startup the ASM instance first and executed the script. I noticed there were no errors during the DB startup (which included the DB that uses ASM) and when I checked the output of "ps -ef | grep pmon", +ASM instance was already up and running.
So the ASM instance was started up automatically - I wonder if this is how it should be?
If this is normal, should I forget about adding ASM instance startup commands to the second shell script?
RegardsWhat is the version?
If 11gR2 , ASM home will come automatically i.e. diskgroups will be mounted.
or check is there any script mentioned in init.d something like http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php -
How to clean the asm instance from RAC manually
for some reason i run crs_unregister asm and crs_unregister lsnr to remove the asm and listener resource from crs yesterday
and today i want rebuild the asm instance ,so i run dbca again ,but error
Error when starting ASM instance on node rac1: PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [PRKS-1011 : Failed to check status of ASM instance "+ASM1" on node "rac1", [CRS-0210: Could not find resource ora.rac1.ASM1.asm.]]
[PRKS-1011 : Failed to check status of ASM instance "+ASM1" on node "rac1", [CRS-0210: Could not find resource ora.rac1.ASM1.asm.]]
DBCA could not startup the ASM instance on node: rac1. Manual intervention is required to recreate these instances. If you choose to proceed, ASM diskgroups will not be mounted on non-started remote ASM instances. Do you want to proceed with ASM diskgroup management?
and problem is how to do this "Manual intervention is required to recreate these instances", I already do 1, dd the asm disk, 2, remove the +ASM directory from $ORACLE_BASE, 3,clean ASM info from /etc/oratab, so what i can do next ?
i try restart crs ,now the error info is different !!
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/silent6.log"
for further details.
[oracle@rac1 ~]$ cat /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/silent6.log
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_+ASM1'
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_+ASM1'
Edited by: 859340 on 2011-7-8 下午11:01Hi,
Can you post the dbca log?
and do you share the asm home with oracle home? if it is separated then add LISTENER_+ASM1 in tnsnames in ASMHOME, otherwise add it in ORACLEHOME
Cheers -
Dear All,
We have databases running on RAC with 2 nodes. Late this afternoon, the entire system crashed! While still trying to determine what caused such a crash, we are trying to bring up the systems. We did a reboot and crs came back online. We then tried to startup the ASM on the first node, but encountered the following errors:
PRKS-1009 : Failed to start ASM instance "+ASM1" on node "balt-bannerdb1", [balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL*Plus: Release 10.2.0.2.0 - Production on Thu Mar 5 22:36:29 2009
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:Enter user-name: Connected to an idle instance.
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL> ORA-03113: end-of-file on communication channel
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL> Disconnected
balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
CRS-0215: Could not start resource 'ora.balt-bannerdb1.ASM1.asm'.] Does anyone know what is going on here?
Thanks!Hi,
there is similar article. maybe you can try this suggestions:
http://kr.forums.oracle.com/forums/thread.jspa?threadID=851576
Regards,
Tom
http://oracledba.cz -
Dbca fails cuz ASM instance startup fails. Unable to start both instances.
Following Jeffrey Hunter guide. Installing 2 node RAC on Oracle EL5 w/ 11g
All cluvfy operations successful up to this point of running dbca from node1 (lin1).
Errorwhen starting ASM instance on node lin2: PRKS-1009: Failed to start ASM instance "+ASM2 on node "lin2"...[CRS-0233: Resource or relatives are currently involved with another operation.]
[root@lin1 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE lin1
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE OFFLINE
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
[root@lin1 bin]# pwd
/u01/app/crs/bin
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` failed.
lin1 : CRS-1019: Resource ora.lin2.ASM2.asm (application) cannot run on lin1
CRS-0215: Could not start resource 'ora.lin2.ASM2.asm'.
[root@lin1 bin]# ./crs_stop ora.lin1.ASM1.asm
Attempting to stop `ora.lin1.ASM1.asm` on member `lin1`
Stop of `ora.lin1.ASM1.asm` on member `lin1` succeeded.
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` succeeded.
[root@lin1 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application OFFLINE OFFLINE
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE ONLINE lin2
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
...and so forth. I can't get both ASM instances to run concurrently. The dbca complains about whichever one is OFFLINE. When I try to start the OFFLINE instance I get something like:
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` failed.
lin1 : CRS-1019: Resource ora.lin2.ASM2.asm (application) cannot run on lin1
CRS-0215: Could not start resource 'ora.lin2.ASM2.asm'.
Any assistance very much appreciated. - thx, yomickthanks for the response...vip seems to be fine...
[oracle@lin1 bin]$ more /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.50 shiva
# Public Network - (eth0)
192.168.1.100 lin1
192.168.1.101 lin2
# Private Interconnect - (eth1)
192.168.2.100 lin1-priv
192.168.2.101 lin2-priv
# Public Virtual IP (VIP) - (eth0)
192.168.1.200 lin1-vip
192.168.1.201 lin2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler
192.168.2.195 openfiler-priv
[2]+ Exit 255 dbca
[oracle@lin1 bin]$ ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200) 56(84) bytes of data.
64 bytes from 192.168.1.200: icmp_seq=1 ttl=64 time=0.100 ms
64 bytes from 192.168.1.200: icmp_seq=2 ttl=64 time=0.092 ms
--- 192.168.1.200 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.092/0.096/0.100/0.004 ms
[oracle@lin1 bin]$ ping 192.168.1.201
PING 192.168.1.201 (192.168.1.201) 56(84) bytes of data.
64 bytes from 192.168.1.201: icmp_seq=1 ttl=64 time=3.30 ms
64 bytes from 192.168.1.201: icmp_seq=2 ttl=64 time=0.236 ms
64 bytes from 192.168.1.201: icmp_seq=3 ttl=64 time=0.297 ms
--- 192.168.1.201 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 0.236/1.279/3.306/1.433 ms
[oracle@lin1 bin]$ crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE lin1
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE OFFLINE
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
[oracle@lin1 bin]$ -
RAC, ASM failed to start up on second node , ORA-03113: end-of-file on comm
i'm installing an RAC with 2 nodes on top of ASM
when creating ASM Diskgroup , it failed and reported error CRS-0215 failed to start asm on node2
Oracle 10.2.0.1
linux CentOs 4.x
u01/app/oracle/product/10.2.0/db_1/bin/dbca -progress_only -configureASM -templateName NO_VALUE -gdbName NO -sid NO -emConf
iguration NONE -diskList /dev/raw/raw2,/dev/raw/raw3 -diskGroupName DATA -datafileJarLocation /u01/app/oracle/product/10.2.0/db_
1/assistants/dbca/templates -responseFile NO_VALUE -nodeinfo node1,node2 -obfuscatedPasswords true -oratabLocation /u01/app/o
racle/product/10.2.0/db_1/install/oratab -asmSysPassword 05dbb0be38ecf8cca822cf3cf99e675448 -redundancy EXTERNA
[oracle@node2 bin]$ ./crs_stat -t -v
Name Type R/RA F/FT Target State Host
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE node1
ora....E1.lsnr application 0/5 0/0 ONLINE ONLINE node1
ora.node1.gsd application 0/5 0/0 ONLINE ONLINE node1
ora.node1.ons application 0/3 0/0 ONLINE ONLINE node1
ora.node1.vip application 0/0 0/0 ONLINE ONLINE node1
ora....SM2.asm application 0/5 0/0 OFFLINE OFFLINE
ora....E2.lsnr application 0/5 0/0 ONLINE ONLINE node2
ora.node2.gsd application 0/5 0/0 ONLINE ONLINE node2
ora.node2.ons application 0/3 0/0 ONLINE ONLINE node2
ora.node2.vip application 0/0 0/0 ONLINE ONLINE node2
i checked the status , asm is able to start on both nodes if not at the same time ,
when trying to start the second node , with srvctl or sqlplus , each give the error 03113
can anyone suggest me of how to bring up both instances ,
thanks~
[oracle@node2 bin]$ srvctl stop asm -n node1
[oracle@node2 bin]$ srvctl start asm -n node1
[oracle@node2 bin]$ srvctl start asm -n node2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "node2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "node2", [node2:ora.node2.ASM2.asm:
node2:ora.node2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Wed May 27 16:14:50 2009
node2:ora.node2.ASM2.asm:
node2:ora.node2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
node2:ora.node2.ASM2.asm:
node2:ora.node2.ASM2.asm:Enter user-name: Connected to an idle instance.
node2:ora.node2.ASM2.asm:
node2:ora.node2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
node2:ora.node2.ASM2.asm:SQL> Disconnected
node2:ora.node2.ASM2.asm:
[code/]
Edited by: zs_hzh on May 27, 2009 1:25 AMIs it possible to start ASM on second node with SQL*Plus in NOMOUNT state?
-
Unable to recreate ASM instance in 10g rac (2 node )
Hi,
I have successfully installed the clusterware and database software.during ASM installation it got failed, i i have cleaned up ASM setup.
Now i am not able to create asm instance it show following message
PRKS-1011:Failed to check status of ASM instance "+ASM1" on node "rac1",[
CRS-0210:Could not find resource ora.rac1.ASM1.asm
here are few output of commands and activity done
[oracle@rac1 ~]$ crs_stat -t
Name Type Target State Host
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2
[oracle@rac1 ~]$
[oracle@rac1 ~]$ crs_profile -validate ora.rac1.ASM1.asm
CRS-0181: Cannot access the resource profile '/u01/app/oracle/product/10.2.0/crs_1/crs/public/ora.rac1.ASM1.asm.cap'.
CRS-0180: Resource '/u01/app/oracle/product/10.2.0/crs_1/crs/public/ora.rac1.ASM1.asm.cap' validation failed.
[oracle@rac1 ~]$ crs_profile -validate ora.rac2.ASM2.asm
CRS-0181: Cannot access the resource profile '/u01/app/oracle/product/10.2.0/crs_1/crs/public/ora.rac2.ASM2.asm.cap'.
CRS-0180: Resource '/u01/app/oracle/product/10.2.0/crs_1/crs/public/ora.rac2.ASM2.asm.cap' validation failed.
[oracle@rac1 ~]$
[oracle@rac1 ~]$
[oracle@rac1 ~]$ crs_unregister ora.rac1.ASM1.asm
CRS-0210: Could not find resource 'ora.rac1.ASM1.asm'.
[oracle@rac1 ~]$ crs_unregister ora.rac2.ASM2.asm
CRS-0210: Could not find resource 'ora.rac2.ASM2.asm'.
I Have deleted following files
rm -Rf $ORACLE_BASE/admin/+ASM
rm -Rf $ORACLE_HOME/dbs/*ASM*
[oracle@rac1 ~]$ rm -Rf $ORACLE_HOME/dbs/*ASM*
[oracle@rac1 ~]$ rm -Rf $ORACLE_BASE/admin/+ASM
[oracle@rac1 ~]$ ssh rac2
Last login: Thu Feb 23 16:31:26 2012 from rac1.mylinux.localdomain
[oracle@rac2 ~]$ rm -Rf $ORACLE_BASE/admin/+ASM
[oracle@rac2 ~]$ rm -Rf $ORACLE_HOME/dbs/*ASM*
dbca -silent -deleteASM -nodelist rac1,rac2 -----AS per oracle DOC
Also removed entries from oratab file for ASM instances.
Dbca error message during asm instance creation for both node
PRKS-1011:Failed to check status of ASM instance "+ASM1" on node "rac1",[
CRS-0210:Could not find resource ora.rac1.ASM1.asm
PRKS-1011:Failed to check status of ASM instance "+ASM2" on node "rac2",[
CRS-0210:Could not find resource ora.rac2.ASM2.asm
Did i forget to remove entries for ASM instance somewhere.
Please help me.Hi,
I believe your OCR is corrupted....so restore the OCR from most recent backup (before error ).
Using crs_* commands on resources with the prefix ora.* (resources provided by Oracle) remains unsupported.
After restore OCR... remove ASM with "srvctl" command:
http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm#CHDBDDAD
Regards,
Levi Pereira
Maybe you are looking for
-
Problem push and hold on a Surface Pro tablet's touch screen
Hi, I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally. I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the table
-
Officejet 7310xi All in One Printer no longer connects wirelessly
Hello all, My Officejet 7310xi All in One Printer no longer connects wirelessly. The printer does no show up while searching for it wirelessly where it had previously. In the past it would say that the printer (HP Series 7300) was offline. I would r
-
I have a T-61 6465 CTO with Windows Vista Ultimate (OEM). Something became corrupted and I contacted Lenovo and Microsoft about this issue. MS provided a replacement disc to fix the issue. I loaded it and it asked for the product key which I used
-
Whenever I try to print a PDF file it prints teh header but empty page s.. I have the Adobe add on and it is enabled .. The same file is printable with Internet Explorer . Help !! Getting awfully tired of opening uo IE just to print .. If anyone has
-
Iphone 4s wont play long playlist frommusic app
i have an iphone 4s. when i sync playlist longer than 200 songs its hangs up. and i have one with 2000 songs and it wont open them. clear white screen, then shut down music app. help.