Failure with multiple problems

All of a sudden when i turned on my laptop it didn't show the display; i tired but after a while it started when i let it cool down. but this time it started to flicker,and when it turned on completely it was not showing the battery icon charging i.e no plug thing on the icon even it was pluggen in. also suddenly my GPU was not detected as i had both integrated intel gpu and ATI 5650 gpu. Please help me to resolve this issue. My product is DV6 3043tx and i tried on windows 7,windows 8 and linux mint.
P.S. : I managed to stop flickering by removing the power button strip which whenever connected makes the flickering start again.

Hello dudeappy,
Your laptop is not showing that it is charging and is not showing graphics.
Go to HP.com and update the BIOS and graphics.
Here is a link to the updates
Let me know how everything goes.
Have a good day.

Similar Messages

Imac G5 v. 10.3.6 with multiple problems startup failure + error code +

I have tired numerous suggestions without writing, but no luck. Here's the deal: I may have erased important files in the start up volume. Don't know exactly. Upon start up I get to the white screen with the gray apple icon and the time indicator circle. It stays in on this screen until the fan starts to speed up and I am forced to manually shut down. I ran a short test of the hardware and everything passed. Ran an extended test and there was an error code 2STF/8/3:S-ATA Bus 0 - Master reported in the mass storage. Went to the utilities of the install disk and noticed there are two applications under volumes Mac OS x and OS 9 (computer was purchased from ebay used with Final Cut Pro already included). Also there is a "dev" harddrive seen with the "System" harddrive???? The system files/folder seem to be normal except that the Library is empty. A Library does exist under the "root" folder followed by perferences. I don't know if it matters but when we bought this computer we put our previous system onto it. Recently I tired to reinstall by saving the archives and an error was reported and I was asked to try to reinstall again. Again I returned to the disk utilities and ran the first aid on the System and it reported that the the reserved fields in the catalog record have incorrect data, followed by invalid sibling lind (red font) and Rebuiling Catalog B-tree. The volume system reported it could not be repaired (-9972). Any advice at this point would be appreciated. My husband is about to kill me. We are living in Costa Rica and the nearest applestore is 3 hours away. We just got this computer back from them. It took 3 months to replace the powersupply.

Hi Dardaner, and a warm welcome to the forums!
You have problems with the Hard Drive, how bad I'm not certain.
Do you need the Data that is on that Drive?
If so, unfortunately DU can't fix all that much, your best bet is DiskWarrior, you need the CD though.
http://www.alsoft.com/DiskWarrior/
If you can afford to start over and lose all that data, then, perhaps...
"Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, then chose MacOS Extended Journalled.
6. Click Erase & look for Options. choose Zero 1 pass."
You may be able to reinstall then, but of course nothing you had before will be there.

Need some assistance with multiple problems (8330 Curve)

Hello all,
I am recent buyer of an 8330 (Verizon). I like it a lot and find it a very useful tool. Being new to the BB world, I do have some questions, that I cannot find answered on any of the BB forums.
So here they are:
1. I have two e-mail accounts setup on my BB. So this means that I should have only two e-mail options under applications. I have three and the third one seems to get messages from both of my two other accounts. What is also weird is that there is no e-mail header on the top (like with the other two e-mail folders). How do I get e-mails to stop going in to this folder and basically delete it? The other strange thing (that I just noticed is that this generic e-mail box gets some e-mails that my other two accounts never see (even though they have their correct e-mail address on them)!
2. How do I create sig lines for my e-mail accounts? I have read the help pages, but the instructions they give me for creating signatures on my outgoing e-mails does not work.
3. Does the new 4.5 SW upgrade allow me to use the GPS capability with my phone? I bought the download Garmin SW for my phone ONLY to find out later that Verizon has blocked this feature! It should would be nice if either VZ or Garmin would have made that crystal clear when I got my phone. :-(
Thanks much for all the assistance!
Grant

1. That is the "Messages" folder. It is a dumping ground for ALL messages including all emails, sms, mms, pin, BBMessenger (if selected) and any others like Browser messages, etc. You can't stop messages from going there but you can hid the icon, if you like.
2. To create signatures for email you have to use the BIS logon from your PC. Use the link below to do this:
https://bis.na.blackberry.com/html?brand=vzw
3. Upgrading the OS does not allow you to use the GPS with other software like Garmin. This is a Verizon lock and there is no way around it. They want you to pay for their service.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Multiple Problems with 4.2.1 update

Hi. I installed 4.2.1, and am experiencing multiple problems ever since.
1.) battery life is horrible I can fully charge it, and three or four hours later it is completely dead.
2.) wifi is wonky or, mostly, nonexistent
3.) ringtones vanished, and the default rings are barely-audible.
4.) I keep getting a random message that I need to sync my photos.
5.) Ipod volume seems to have gone down. I can crank my car stereo up all the way, and sometimes it's still not enough to hear my music.
I have a two year old, non-jailbroken 3GS which I run on a macbook, and I'm pretty good about updating itunes and iphone OS on a regular basis. I've searched at length to find fixes and am just at my wits' end. I loved this phone, at least pre 4.2.1 I did!
Any suggestions appreciated. Thanks!

Hi, Action.
Thanks very much for the well considered, thorough answer.
I got everything working again (though will see what the battery does today), and this is what I did. I'm not sure which thing worked.
1.) One blog I found suggested doing TWO hard resets in a row, which I did.
2.) I went to
settings
Safari
clear cookies/history/cache
and cleared them all, twice, to be sure.
3.) I went to
settings
reset
reset network settings
4.) I went to
settings
reset
reset all settings
5.) I deleted all my photos one by one (I had already saved everything I wanted to iPhoto), and discovered that (and I don't know if this is normal or not, but I had never noticed this before), one of my albums was "locked". This was an album of photos and jpgs I had tinkered with using various apps, Photogene, etc. I could view only. Couldn't delete or flick to resize anything in the album. When I synced my phone, I checked "sync photos" but made sure no album or other boxes were checked. This deleted the locked album, emptied my entire "Photos" app, and consequently removed the "sync photos" message I kept getting. I took a few test photos to doublecheck, and the message hasn't reappeared.
I note that this is not only making my camera open faster now, it's making it take photos faster, and darned if they aren't better resolution as well. I had noticed, but not connected with 4.2.1, that my photos were really grainy and poor quality lately.
6.) I did the opposite of what someone on this forum suggested. I always selected my one ringtone, which is what their suggestion was. I only have three, so when I synced, I selected "all", and it defaulted back to giving me a choice. My ringtone, btw, was a home made one, which I am very attached to. I spent hours researching how to salvage it, and thankfully, didn't have to get into figuring out how to change the extensions and length of the the thing as other forums suggested at terrifyingly great length.
Memos and email are also opening faster, and I have my fast wifi back again while at home.
It's kind of like a heart failure. I didn't realize I was getting slower and more winded, it was so gradual over the past few weeks. And now I've had a miracle recovery, and am ready to go run some sprints, lol.
Thanks very much for your suggestions and quick answer. I spent hours and hours researching my problems with 4.2.1 and my ringtones.

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Multiple problems with PSE10 Organizer

I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
Question: Is there any limit to the number of images that can be put into one catalog?
Catalog A
Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
Catalog B
I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
Question: How do I get the Organizer & Editor to work together again?
Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
Question: How do I get the Exif data back into Properties.
Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Both Catalogs
All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
Question: How is it possible that the date created is later than the date modified?

Hey Paysonite,
A lot of questions hmm!!! Let me try to answer few of them.
Question: Is there any limit to the number of images that can be put into one catalog?
Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
Question: How is it possible that the date created is later than the date modified?
Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
I am unable to fully understand your remaining questions. Please elaborate.
Also please let me know if you need more info with above answers.
~Andromeda

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Multiple Problems with PDF InDesign, Bridge, and Acrobat Reader

I create proof books with a blend of Adobe Bridge & InDesign.
Here is my work flow: I will BOLD the errors I am having and need help with.
Step 1.) I create contact sheets in Bridge and save them as PDF's
Problem with Bridge ( I have another posting for this thread as well under Bridge) I cannot save PDF's larger than 400ish photos at 300ppi (important for my printer) without it saving as a blank PDF. COMPLETELY EMTPY! So I have to split up my photos into groups of 400 or less photos then patch them back together.
Problem with Acrobat: If I patch those PDF’s back together with Adobe Acrobat (a suggestion from another person on here) they save great but I get an error when I try to import them in indesign. The error reading: ERROR. Cannot determine page count.
Please open the PDF file in Acrobat, do a “Save As…” and try again. (99)
Step 2.) I use a script (MultiPageImporter2.2.1.jsx) to import the PDF's into Indesign. (if saved as one pdf in acrobat I get the above error)
Problem With InDesign: I run this importer script in InDesign to create my books with a template I use from my printers. Well since I have to import multiple pdf with multiple pages ( because I can’t piece them together without the above error. Then I have this problem:
I place a pdf with 1-226 pages in. I start this on page 1.
I place the next pdf with 1-141 pages in. I start this on page 227.
An error pops up that says I MUST start my import on page 226!!!!!!!!!! I don’t want to import on page 226 because I have two photos on that page!
I tried it several ways and no matter what I loose my last page of my first import.
PLEASE someone help me! I feel like I might be doing something really silly but I’ve spent 7.5 hours today working on this books with error after error.
I have done all the updates on my computers and nothing works. I use two macs and both have the same errors. I have a mac-book Pro | snow leopard and a Imac | snow leopard.
Thanks much!

All your problems seem to stem from the PDFs that you are making from Bridge. What you are describing should be perfectly possible, but the fact that Bridge doesn't want to make a PDF with more than 400 photos and it all goes downhill from there makes me suspect Bridge.
Here's a plugin that may help? Looks pretty cheap for what it does.
Apart from that I'd try to clean up the PDFs that Bridge is producing if Indesign doesn't like them. One way would be to print to a new PDF, after you've combined them as necessary.
As to the last pronlem you mention, where it forces you to place on page 226, have you tried creating a blank page 227 first, before you try placing?

Messed with multiple Domains... Big Problems

I have posted on this topic because I was experiencing very slow save times and publishing times.
I had 20+ sites created in iWeb, many of which have large photo galleries.
Wanting to solve this problem, I tried a couple of techniques to start with a fresh Domain.
I tried duplicating the existing Domain and deleting the sites I didnt want in Domain 2.
Problem was this retained the massive "Albums" folder within iWeb package content.
The sites didnt show in the iWeb interface but the new Domain was giant (1.9 gigs) and saving and publishing still took forever.
So I went into the Domain 2 package contents and deleted the Albums for the sites I didnt want in my new Domain.
Well then Domain saved and published nice and fast as I expected it to.
Thing is...
Now all of my previous sites from the old Domain are broken when you attempt to view them on the web.
They all look fine when I look at them in iWeb by opening their files in iWeb.
My original Domain is still intact where I have stored it on my computer.
When I check my iDisk, I can see that my old websites are there but their Media folders are completely empty.
Sooo... how do I fix this situation?
I realize I brought this upon myself but I was trying to do what I have got to believe is doable.
I want to have multiple Domains so I can work more efficiently.
Surely I dont have to be saddled with updating a 1.9 gig Domain every time I publish to iWeb.

You're only putting the domain file(s) in the trash to prevent iWeb opening them so that it will be forced to created a new blank domain file. Then drag it out and store it in a folder.
Individual domain files are opened in Iweb by double clicking them.
Splitting domain files with multiple sites is not recommended. You're only leaving yourself open to file corruption and other problems some where down the line.
Start each new site on a blank domain file and store it in its own folder.

Problem Creating PDF with Multiple Files in Pro. 7

I'm using Adobe Acrobat Professional 7 on a computer with Windows XP.
The problem is that when I try to create a PDF with multiple files everything just suddenly stops. There are 75 files involved and when it gets to around 41 or so (don't know the exact number because I turned away from my computer for just a moment), it just stops. There are no error messages; nothing. Just a blank Acrobat screen.
Last week I had a different problem which was resolved by an uninstall/reinstall and I was able to create the PDF with those exact same 75 files, but after the PDF was created I realised that some changes needed to be made. I dumped the PDF, made the appropriate changes and left it for the weekend. Today I the new problem has arisen.
Any ideas what the problem might be?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

Candlestick chart problem with multiple series

Hello,
I added one mx:CandlestickSeries object and couple additional
mx:LineSeries objects to the chart. All series are represented but
still I have one problem. More series I add - less candles are
becoming of CandlestickSeries data. It seems that there should be
any scaling option for all series in the chart or something like
this, but I cannot find it. I'm still new in Flex Can anyone halp
me with this?
Thanx in advance
marukas

I've added screenshots to get better view of the problem.
Here is chart with addtional series:
Chart
with multiple series
And here nothing is changed except that additional line
series were removed:
Chart
with only one CandlestickSeries
Is it possible to get the same candles as in 2nd view with
addiotnal series added?

Problems with Multiple Photo Galleries

Hey all, I am having issues with multiple photo galleries. The problem is, iWeb will randomly delete old photo libraries when new ones are made.
My workflow is each blog entry has its own Photo Library attached to it, so i really would love to be able to keep this functionality.
Does anyone have any clues as to why they are getting deleted? They literally just vanish from the entries in iWeb...
Many thanks, Matt

mattperrott wrote:
Each blog entry has a iweb photo gallery attached to it. I create these by duplicating a previous blog entry, and changing the details as well as the photos contained inside.
Matt ~ Even without adding such complexity, many people have problems with their iWeb blog. So even if someone helps you to solve this problem, you may then be back with a different iWeb blog problem: Lost all your blog entries or all your comments or unable to publish, etc.
mattperrott wrote:
Any thoughts on why this might happen?
The simple answer is that Apple's implementation of iWeb's blog appears to be buggy. Every day on these forums you'll likely see a couple of problems with iWeb's blog, often "solved" like this: +"I deleted my blog page, and was able to successfully publish the site"+. Also, if you ever have to re-publish everything (say, after upgrading iWeb) you'll wish you had a web-based blog.
mattperrott wrote:
This isnt a problem currently but if i ever need to republish my entire site it is a potential killer, especially as it grows...
The person who posted the following thread had similar concerns saying: +"...I get the feeling when this gets bigger, it'll outgrow iWeb's capability."+ Read his solution here:
_To blog or not to blog_
And to link to an external blog from iWeb's navbar:
Create a blank internal page titled "Blog" (Actually you can name the page whatever you want.) Then in that Blog page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://www.yourblogname.com"; // change this to your own URL
</script>
...Once published, clicking on "Blog" in the navbar will immediately redirect to your external Blog page. (Thanks to Cyclosaurus for the code).
By the way, rather than posting your URL in these forums like this:
www.local-hero.com.au
...include the prefix to make it conveniently clickable:
http://www.local-hero.com.au

Multiple problems with Firefox 3.6.6 - Java Console, Flash, PDF & opening

running Windows XP with Firefox 3.6.6. I just upgraded to 3.6.6 & since then have been having multiple problems. 1) 3.6.6 takes a LONG time to load or hangs 2) As recommended Flash plugin updated to Flash 10.1. Subsequently Flash doesn't work. All I get when I use Firefox on any site is the F in a circle that indicates that flash is necessary to display the page. I have no problems with Flash on Google Chrome. 3) Java Console having issues. When 3.6.6 opens it says Java Console must be updated. So I update it. Then when it opens it says it's not supported & needs to be removed. Each time it wants me to restart Firefox to complete the task. If I say restart later cause I'm sick of opening & Closing again & again it pops up every 5-10 minutes & asks again. Please HELP!! 4) PDF files will not open since upgrade to 3.6.6. Having no issues with Google Chrome. It opens in miliseconds & runs everything but I prefer Firefox if it can be gotten to work right. Desperately need help.
== Upon upgrade

Please respond with a list of all of your Extensions.
-type '''about:support''' in your URL/address/location bar and press the Enter key
-click "Copy all to Clipboard"
-paste into your reply
'''1).''' Please explain "long time to load" in more detail; approximately how long? Hanging when: on startup of Firefox, during use (please list some sites/pages, if so), at shutdown?
For hanging at exit:
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''2).''' Could be caused by a Flash-blocking Extension (the reason for asking for your list of Extensions) or could be in your Firewall or AV/AS application. What Firewall and/or AV/AS applications to you use?
See: [[Firewalls]]
'''3).''' Again, the reason for asking for your Extensions. Is it Java Console or Java Deployment Toolkit in the error message. Need version numbers on both of the above. You may have some Java remnants from a prior Java version; Java does not clean-up after itself and we can help you remove some of those remnants, if you will supply the information. See:
http://support.mozilla.com/en-US/kb/Java-related+issues
http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
http://support.mozilla.com/en-US/kb/Java+Deployment+Toolkit+Blocked
http://kb.mozillazine.org/Java
Some users get confused about Java and JavaScript; here is some information:
http://kb.mozillazine.org/JavaScript_is_not_Java
http://support.mozilla.com/en-US/kb/JavaScript
'''4).''' What are the results when you try to load a PDF file off of the internet? You need to check for an update of Adobe Reader (yours appears to be an older version) and after checking for updates to Adobe Reader, check your settings in Tools > Options > Applications for "Adobe Acrobat" Content Types. See:
http://support.mozilla.com/en-US/kb/Options+window+-+Applications+panel http://support.mozilla.com/en-US/kb/Managing+file+types
http://kb.mozillazine.org/File_types_and_download_actions
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Failure with multiple problems

Similar Messages

Maybe you are looking for