Family Mode disabled, Layout and publication mode not visible

Hello Experts,
While working in the data manager, i see that the family mode is diabled. Also, the layout and Publication mode arent visible. What am I missing?
Thanks for your help.
Regards,
Sri

hi,
To view the family mode:
In the console you should have family table set up
For Publication & layout mode:
In the new releases of SAP MDM 5.5 from SP4 and above releases,
you will find MDM publisher: in this you will do the layout and publication. To open publisher you have to install MDM layout server.
hope this may help you,
Regards,
srinivas

Similar Messages

Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

Hi Gurus,
We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
I verified in SU01 for user access and every are assigned there roles and they are green.
Do we need to add any new authorization object to fix this issue, please let me know
Thanks and appreciate your help.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

Hi Ganesh,
check the behaviour, if you assign
S_USER_AGR
   ACT_GROUP = "..name of the assigned role.."
   ACTVT = 03 (for "display")
b.rgds,
Bernhard

TS2988 I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

Try Here > https://discussions.apple.com/docs/DOC-3792

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

Try Here > https://discussions.apple.com/docs/DOC-3792

I cant eject an empty cd from macbook and it is not visible, any idea?

i cant eject an empty cd from macbook tray and it is not visible on the desktop, any idea guys?

When you reboot your machine hold the track pad button down while it's booting.
It's a old tip tell me if it works!

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Facebook profile and home are not visible

Today in the afternoon, Facebook started to act strangely. I can log on without a problem, but when i'm in the website the home and the profile pages are not visible, they are blank and this is strange because with Chrome i have no problems, and because in the safe mode the problem is still here, so the plugins aren't the source of the problem.
The account and other option pages are fine, only those two don't work.
Few weeks ago, i had to change a value in the about:config page, to make work "youtube buttons", but i think it's not that the problem, also because this morning Facebook worked. I don't know what to think. Is this maybe Facebook IT fault? Boh.
Thank you for your time

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

Customise an ASPX in the layouts directory that is not visible in SharePoint Designer

Hi
I want to be able to deploy a customised ASPX page in a Visual Studio WSP solution to my site. There is a file named CopySharedPage.aspx which is used for the dialog that pops up when you edit a page that has multiple friendly URLs. Our users get confused
by this and several of them have clicked the option to 'Edit page for single URL (my page url)' which does this "Create a copy of the page for the URL you were just on to edit it
independent of other URLs." We don't want them doing that. In our site we often have multiple URLs for marketing reasons, but only want to maintain the one physical page of content. I can edit the CopySharedPage.aspx file in
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS directly on the server and comment out or delete the section that creates the link to Edit page for single URL (which consequently creates a copy of the page).
But I would prefer to do this as part of my VS solution to make deployment easier. In my solution I have branding files such as master page, layouts and search assets such as a custom refiner and modified Item_Default.html. All of those items can be found
in SharePoint Designer and they can also be replaced by having a module in VS with those files and with entries to place them using elements.xml in the module.
I tried to do the same with the CopySharedPage.aspx but it doesn't overwrite the one on the server. This is my elements.xml for the module:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="LayoutCustomisations" Url="_catalogs/layouts">

<File Path="LayoutCustomisations\CopySharedPage.aspx" Url="CopySharedPage.aspx" ReplaceContent="True">
</File>
</Module>
</Elements>
I end up getting a CopySharedPage.aspx created at
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\MyWebsite_Site\LayoutCustomisations\CopySharedPage.aspx but it isn't used. The original one is still there in the 15\TEMPLATE\LAYOUTS directory and being used.
Is there something I am doing wrong or do I have to do this a completely different way? Maybe it's not a supported customisation?

There's two ways you can deploy your aspx (layout) files. One is deploy in _Layouts folder (which basically copy the file in (c:\program files\common files\microsoft shared\web server extensions\15\template\layouts). To copy file in that place, you don't
need module, just use SharePoint mapped folder.
Another way is to upload the layout folder in SharePoint library. But _catalogs is not the right place to upload your file (_catalogs doesn't have any subfolder named 'layouts'). You can upload your file in 'Pages' library or 'site pages' library in the
current web.
I'm not quite sure though (sorry I didn't get what the problem is but just guessed you are trying to get your aspx page in SharePoint designer, not sure why) why you need to upload the file in pages/site pages library instead of '_layouts' folder.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

E5 memory card images and videos are not visible i...

am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

Hi saaraaz,
Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
Reinstall the software. The process is the same when updating, but at the end select "reinstall".
Hope you get the device working again, please let me know if this is not the case.
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

"Files" and other tabs not visible for document library after script editor webpart is added

I created a document library and uploaded a few documents to ti. On the ribbon, I could see both "Files" and "Library" tabs. I then added a Script Editor webpart to this page because I needed to run some javascript on this
page. Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab. My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there. If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
now Sharepoint knows that I'm working with a document library. Is there any way aroudn this? We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs. I'm not sure why Sharepoint would
be confused by the Script editor webpart. It is not visible so when the page is not in edit more, you can't even see that Script editor. So, my question is: is there any way to:
- either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
- or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
I also experienced this issue when I wanted to insert some customized text on the same page that had a document library. For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
show some text at the top. That also caused the Files and Library tabs to disappear.
thanks,

Hi,
I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New version of app with subscription and newsstand support not visible in App Store

This might be more question aimed on Apple Support, but maybe someone had similar experience. Today at morning i've released new version of App for customer. This version have two main news - support for newsstand and subscription. Old version disappeared from App Store, but new one is not visible on any market. i'm quite confused, anyone have idea what happened?

Hi, Steven and Martin
I have this porblem now. My app is out from app store, because I delete the subscription in my app with newsstabd enable.
I'm a little confused, because I submit a new subscription - with a new product ID - because I can't reuse the first.
Apple don´t allow me update a new app without newsstand. Until now I hadn´t answer from apple about the new subscription and my app continuous nor visible in app store, but the status is "ready to sale".
At least, Apple should me send a message about this issue.
All the problem started because I set the tier price to subscription the same value to retail price (tier 3), then when I changed the tier price to amount the period subscription - 6 months (tier 90). This price (tier 90) was set to the retail folios too, so my magazine turned the most expensive in App Store!!!
Please, I'd like and I need to understand better how set differents prices to retail and subscription, because something happened wrong in my first try

Family Mode disabled, Layout and publication mode not visible

Similar Messages

Maybe you are looking for